Electrochemically generated tungsten‐based active species as catalysts for metathesis‐related reactions: 2. Ring‐opening metathesis polymerization of norbornene

The present work reports the application of the WCl₆–e^?–Al–CH₂Cl₂ catalyst system to the ring‐opening metathesis polymerization of norbornene. Analysis of the polynorbornene microstructure by means of ¹H and ¹³C NMR spectroscopy indicates that the polymer contains a mainly cis stereoconfiguration of the double bonds (σ_c = 0.61) and a blocky distribution (r_tr_c > 1) of cis and trans double bonds (r_tr_c = 3.37). This catalytic system is reluctant to facilitate the competing addition reactions of cycloalkenes while proceeding with the polymerization reactions with good conversions and at short periods. Copyright © 2004 John Wiley & Sons, Ltd.     

Application of carbon arc‐generated Mo‐ and W‐based catalyst systems to the ROMP of norbornene

This study focuses on the application of the carbon arc‐generated molybdenum‐ and tungsten‐based catalyst systems, MoCl₅? C and WCl₆? C, to effect ring‐opening metathesis polymerization (ROMP) of bicyclo[2.2.1]hept‐2‐ene (norbornene). The results are compared with those previously obtained by the electrochemically generated MoCl₅? ē? Al? CH₂Cl₂ and WCl₆? ē? Al? CH₂Cl₂ systems. The polymer products are characterized using ¹H and ¹³C NMR, gel permeation chromatography, differential scanning calorimetry and thermo gravimetric analysis. According to NMR spectra analyses, the molybdenum‐based catalyst system produced polynorbornene with ca 48% cis structure whereas tungsten system produced ca 56% cis structure polynorbornene and in both cases the polynorbornene had a blocky distribution. Copyright © 2009 John Wiley & Sons, Ltd.     

Electrochemically generated tungsten‐based active species as catalysts for metathesis‐related reactions: 1. Acyclic diene metathesis polymerization of 1,9‐decadiene

The application of the WCl₆–e^?–Al–CH₂Cl₂ system to acyclic diene metathesis polymerization of 1,9‐decadiene is reported. The polyoctenamer formed is of a weight‐average molecular weight of 9000 with a polydispersity of 1.92. IR and NMR spectral analyses indicate the retention of the double bonds in the polymer structure with high trans content as expected from a step condensation reaction. This relatively stable catalytic system, however, also activates the competing vinyl addition reactions while being inactive in ring‐closure metathesis reactions. Copyright © 2002 John Wiley & Sons, Ltd.     

Ring‐opening metathesis polymerization of cyclododecene using an electrochemically reduced tungsten‐based catalyst

The ring‐opening metathesis polymerization of cyclododecene using an electrochemically reduced tungsten‐based catalyst (WCl₆? e^?? Al? CH₂Cl₂) is described. In addition, the influence of reaction conditions on the polymerization yield was determined. The resulting polymer has been characterized by NMR, IR, gel permeation chromatography and differential scanning calorimetry. The glass transition temperature and melting point of the polydodecenamer are 19.6°C and 70.0°C respectively. Furthermore, cyclododecene has been polymerized into a low‐molecular‐weight polymer (12.0 × 10³) with a polydispersity of 2.06 in high yields (94%). IR and NMR analysis indicate that the polydodecenamer has a high trans content (60%). Copyright © 2004 John Wiley & Sons, Ltd.     

Synthese und strukturelle Studien von Aluminiumdialkylaminen und ‐amiden: N‐Chiralität von (CH3)3AlNHRR′ und cis‐trans‐Isomerie an X2AlNRR′ (X = CH3, Cl,H)

Synthesis and Structural Studies of Aluminum Dialkylamines and Dialkylamides: N‐Chirality of (CH₃)₃AlNHRR′ and cis‐trans ‐Isomerism at X₂AlNRR′ (X = CH₃, Cl, H) Aluminum dialkylamines and dialkylamides were prepared from Al(CH₃)₃ and NH(CH₃)R′ (R′: –C₂H₅, –^tC₄H₉) and characterized by elemental analyses, ¹H‐, ¹³C‐, and ²⁷Al‐NMR spectroscopy. The crystal structures of [(CH₃)₂AlN(CH₃)(–^tC₄H₉)]₂ ( IV ), [Cl₂AlN(CH₃)(C₂H₅)]₂ ( V ), and [H₂AlN(CH₃)(C₂H₅)]_∞ ( VI‐trans and VI‐cis ) are discussed.     

Electrochemically reduced tungsten‐based active species as catalysts for cross‐metathesis reactions: cross‐metathesis of erucic acid with 2‐octene

The cross‐metathesis of erucic acid, (CH₃(CH₂)₇CH?CH(CH₂)₁₁COOH), with an excess of 2‐octene in the presence of an electrochemically produced tungsten‐based catalyst has been studied. Cross‐ and self‐hydrocarbon products, viz. 2‐undecene (C₁₁), 6‐dodecene (C₁₂) and 6‐pentadecene (C₁₅), were detected. The influence of several parameters, such as the 2‐octene/erucic acid and 2‐octene/catalyst ratios and the reaction time, on the yield of the cross‐metathesis product, 6‐pentadecene, was studied. The cross‐metathesis of functionalized olefins in the presence of an Al–e^?–WCl₆–CH₂Cl₂ system has not been reported in the literature so far. The cross‐metathesis products in the presence of this catalyst system can be obtained with high yield and high specificity. Copyright © 2004 John Wiley & Sons, Ltd.     

Attempted Abstraction of the Halogenides in (HNEt3)[Re(CH3CN)2Cl4] and Crystal Structures of cis‐[Re(CH3CN)2Cl4]·CH3CN and cis‐[Re(NHC(OCH3)CH3)2Cl4]

The abstraction of the halogenide ligands in [Re(CH₃CN)₂Cl₄]^? should result in a solvent‐only stabilized Re^III complex. The reactions of salts of [Re(CH₃CN)₂Cl₄]^? with silver(I) and thallium(I) salts were investigated and the solid‐state structures of cis‐[Re(CH₃CN)₂Cl₄]·CH₃CN and cis‐[Re(NHC(OCH₃)CH₃)₂Cl₄] are described.     

Electrochemically reduced tungsten‐based active species as catalysts for cross‐metathesis reactions: cross‐metathesis of non‐functionalized olefins

The electrochemical reduction of WCl₆ results in the formation of an active olefin (alkene) metathesis catalyst. The application of the WCl₆–e^?–Al–CH₂Cl₂ catalyst system to cross‐metathesis reactions of non‐functionalized acyclic olefins is reported. Undesirable reactions, such as double‐bond shift isomerization and subsequent metathesis, were not observed in these reactions. Cross‐metathesis of 7‐tetradecene with an equimolar amount of 4‐octene generated the desired cross‐product, 4‐undecene, in good yield. The reaction of 7‐tetradecene with 2‐octene, catalyzed by electrochemically reduced tungsten hexachloride, resulted in both self‐ and cross‐metathesis products. The cross‐metathesis products, 2‐nonene and 6‐tridecene, were formed in larger amounts than the self‐metathesis products of 2‐octene. The optimum catalyst/olefin ratio and reaction time were found to be 1 : 60 and 24 h, respectively. The cross‐metathesis of symmetrical olefins with α‐olefins was also studied under the predetermined conditions. Copyright © 2003 John Wiley & Sons, Ltd.     

Polymerization of 2‐pentene with Ni(II) α‐diimine complex/M‐MAO catalyst and structure of the polymer

Polymerization of 2‐pentene with [ArN?C(An)C(An)·NAr)NiBr₂ (Ar?2,6‐iPr₂C₆H₃)] ( 1‐Ni) /M‐MAO catalyst was investigated. A reactivity between trans‐2‐pentene and cis‐2‐pentene on the polymerization was quite different, and trans‐2‐pentene polymerized with 1‐Ni /M‐MAO catalyst to give a high molecular weight polymer. On the other hand, the polymerization of cis‐2‐butene with 1‐Ni /M‐MAO catalyst did not give any polymeric products. In the polymerization of mixture of trans‐ and cis‐2‐pentene with 1‐Ni /M‐MAO catalyst, the M_n of the polymer increased with an increase of the polymer yields. However, the relationship between polymer yield and the M_n of the polymer did not give a strict straight line, and the M_w/M_n also increased with increasing polymer yield. This suggests that side reactions were induced during the polymerization. The structures of the polymer obtained from the polymerization of 2‐ pentene with 1‐Ni /M‐MAO catalyst consists of ? CH₂? CH₂? CH(CH₂CH₃)? , ? CH₂? CH₂? CH₂? CH(CH₃)? , ? CH₂? CH(CH₂CH₂CH₃)? , and methylene sequence ? (CH₂)_n? (n ≥ 5) units, which is related to the chain walking mechanism. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2858–2863, 2008     

Tetrakis(5‐tert‐butylpyrazole‐1κN2)tetrachloro‐1κCl,2κ3Cl‐μ‐oxo‐1:2κ2O‐diiron(III)

The title compound, [Fe₂Cl₄O(C₇H₁₂N₂)₄], contains vertex‐sharing distorted tetrahedral [FeOCl₃]^? and octahedral [FeOCl(Hpz^tBu)₄]⁺ moieties (Hpz^tBu is 5‐tert‐­butyl­pyrazole), linked by a bent oxo bridging ligand. The two Fe^III centres are also bridged by intramolecular hydrogen bonds between the pyrazole N—H groups and the O^2? and Cl^? ligands.     

Diimido‐, Imido(oxo)‐, Dioxo‐ und Imido(alkyliden)‐Halbsandwich‐Verbindungen über selektive Hydrolyse und α—H‐Abstraktion an Organylkomplexen des sechswertigen Molybdäns und Wolframs

Diimido, Imido Oxo, Dioxo, and Imido Alkylidene Halfsandwich Compounds via Selective Hydrolysis and α—H Abstraction in Molybdenum(VI) and Tungsten(VI) Organyl Complexes Organometal imides [(η⁵‐C₅R₅)M(NR′)₂Ph] (M = Mo, W, R = H, Me, R′ = Mes, tBu) 4 — 8 can be prepared by reaction of halfsandwich complexes [(η⁵‐C₅R₅)M(NR′)₂Cl] with phenyl lithium in good yields. Starting from phenyl complexes 4 — 8 as well as from previously described methyl compounds [(η⁵‐C₅Me₅)M(NtBu)₂Me] (M = Mo, W), reactions with aqueous HCl lead to imido(oxo) methyl and phenyl complexes [(η⁵‐C₅Me₅)M(NtBu)(O)(R)] M = Mo, R = Me ( 9 ), Ph ( 10 ); M = W, R = Ph ( 11 ) and dioxo complexes [(η⁵‐C₅Me₅)M(O)₂(CH₃)] M = Mo ( 12 ), M = W ( 13 ). Hydrolysis of organometal imides with conservation of M‐C σ and π bonds is in fact an attractive synthetic alternative for the synthesis of organometal oxides with respect to known strategies based on the oxidative decarbonylation of low valent alkyl CO and NO complexes. In a similar manner, protolysis of [(η⁵‐C₅H₅)W(NtBu)₂(CH₃)] and [(η⁵‐C₅Me₅)Mo(NtBu)₂(CH₃)] by HCl gas leads to [(η⁵‐C₅H₅)W(NtBu)Cl₂(CH₃)] 14 und [(η⁵‐C₅Me₅)Mo(NtBu)Cl₂(CH₃)] 15 with conservation of the M‐C bonds. The inert character of the relatively non‐polar M‐C σ bonds with respect to protolysis offers a strategy for the synthesis of methyl chloro complexes not accessible by partial methylation of [(η⁵‐C₅R₅)M(NR′)Cl₃] with MeLi. As pure substances only trimethyl compounds [(η⁵‐C₅R₅)M(NtBu)(CH₃)₃] 16 ‐ 18 , M = Mo, W, R = H, Me, are isolated. Imido(benzylidene) complexes [(η⁵‐C₅Me₅)M(NtBu)(CHPh)(CH₂Ph)] M = Mo ( 19 ), W ( 20 ) are generated by alkylation of [(η⁵‐C₅Me₅)M(NtBu)Cl₃] with PhCH₂MgCl via α‐H abstraction. Based on nmr data a trend of decreasing donor capability of the ligands [NtBu]^2— > [O]^2— > [CHR]^2— ? 2 [CH₃]^— > 2 [Cl]^— emerges.     

Chelation versus Binucleation: Metal Complex Formation with the Hexadentate all‐cis‐N1,N2‐Bis(2,4,6‐trihydroxy‐3,5‐diaminocyclohexyl)ethane‐1,2‐diamine

The hexadentate ligand all‐cis‐N¹,N²‐bis(2,4,6‐trihydroxy‐3,5‐diaminocyclohexyl)ethane‐1,2‐diamine (L^e) was synthesized in five steps with an overall yield of 39 % by using [Ni(taci)₂]SO₄?4 H₂O as starting material (taci=1,3,5‐triamino‐1,3,5‐trideoxy‐cis‐inositol). Crystal structures of [Na_0.5(H₆L^e)](BiCl₆)₂Cl_0.5?4 H₂O ( 1 ), [Ni(L^e)]‐ Cl₂?5 H₂O ( 2 ), [Cu(L^e)](ClO₄)₂?H₂O ( 3 ), [Zn(L^e)]CO₃?7 H₂O ( 4 ), [Co(L^e)](ClO₄)₃ ( 5 c ), and [Ga(H_?2L^e)]‐ NO₃?2 H₂O ( 6 ) are reported. The Na complex 1 exhibited a chain structure with the Na⁺ cations bonded to three hydroxy groups of one taci subunit of the fully protonated H₆(L^e)⁶⁺ ligand. In 2 , 3 , 4 , and 5 c , a mononuclear hexaamine coordination was found. In the Ga complex 6 , a mononuclear hexadentate coordination was also observed, but the metal binding occurred through four amino groups and two alkoxo groups of the doubly deprotonated H_?2(L^e)^2?. The steric strain within the molecular framework of various M(L^e) isomers was analyzed by means of molecular mechanics calculations. The formation of complexes of L^e with Mn^II, Cu^II, Zn^II, and Cd^II was investigated in aqueous solution by using potentiometric and spectrophotometric titration experiments. Extended equilibrium systems comprising a large number of species were observed, such as [M(L^e)]²⁺, protonated complexes [MH_z(L^e)]^2+z and oligonuclear aggregates. The pK_a values of H₆(L^e)⁶⁺ (25 °C, μ=0.10 m ) were found to be 2.99, 5.63, 6.72, 7.38, 8.37, and 9.07, and the determined formation constants (log β) of [M(L^e)]²⁺ were 6.13(3) (Mn^II), 20.11(2) (Cu^II), 13.60(2) (Zn^II), and 10.43(2) (Cd^II). The redox potentials (vs. NHE) of the [M(L^e)]^3+/2+ couples were elucidated for Co (?0.38 V) and Ni (+0.90 V) by cyclic voltammetry.     

An inhibitor of Janus kinase 3: 4‐(4‐hydroxy­phenyl­amino)‐6,7‐di­methoxy­quinazolin‐1‐ium chloride methanol solvate

The crystal structure of the title compound, C₁₆H₁₆N₃O₃⁺·Cl^?·CH₄O (WHI‐P131, an inhibitor of Janus kinase 3), contains four hydrogen bonds. There are two hydrogen bonds within the asymmetric unit, i.e. interactions between WHI‐P131 OH and Cl^?, and between methanol and Cl^?. There is a third interaction between WHI‐P131 NH and Cl^? (related by a 2₁ screw) and a fourth between WHI‐P131 NH and methanol (related by an n‐glide). The hydrogen‐bond pattern for these interactions can be described by the first‐level hydrogen‐bond graph‐set notation D¹₁(2)D¹₁(2)D¹₁(2)D¹₁(2). The second‐level graph‐set notation (for combinations of two hydrogen bonds) was determined to be D¹₂(3)­D¹₂(3)­D²₂(4)­D²₂(9)­D²₂(14)­C¹₂(9).     

A Remarkable Solvent Effect on the Nuclearity of Neutral Titanium(IV)‐Based Helicate Assemblies

The spontaneous self‐assembly of a neutral circular trinuclear Ti^IV‐based helicate is described through the reaction of titanium(IV) isopropoxide with a rationally designed tetraphenolic ligand. The trimeric ring helicate was obtained after diffusion of n‐pentane into a solution with dichloromethane. The circular helicate has been characterized by using single‐crystal X‐ray diffraction study, ¹³C CP‐MAS NMR and ¹H NMR DOSY solution spectroscopic, and positive electrospray ionization mass‐spectrometric analysis. These analytical data were compared with those obtained from a previously reported double‐stranded helicate that crystallizes in toluene. The trimeric ring was unstable in a pure solution with dichloromethane and transformed into the double‐stranded helicate. Thermodynamic analysis by means of the PACHA software revealed that formation of the double‐stranded helicates was characterized by ΔH(toluene)=?30 kJ mol^?1 and ΔS(toluene)=+357 J K^?1 mol^?1, whereas these values were ΔH(CH₂Cl₂)=?75 kJ mol^?1 and ΔS(CH₂Cl₂)=?37 J K^?1 mol^?1 for the ring helicate. The transformation of the ring helicate into the double‐stranded helicate was a strongly endothermic process characterized by ΔH(CH₂Cl₂)=+127 kJ mol^?1 and ΔH(n‐pentane)=+644 kJ mol^?1 associated with a large positive entropy change ΔS=+1115 J K^?1?mol^?1. Consequently, the instability of the ring helicate in pure dichloromethane was attributed to the rather high dielectric constant and dipole moment of dichloromethane relative to n‐pentane. Suggestions for increasing the stability of the ring helicate are given.     

Silicon‐ and Tin‐Containing Open‐Chain and Eight‐Membered‐Ring Compounds as Bicentric Lewis Acids toward Anions

Herein, we report the syntheses of silicon‐ and tin‐containing open‐chain and eight‐membered‐ring compounds Me₂Si(CH₂SnMe₂X)₂ ( 2 , X=Me; 3 , X=Cl; 4 , X=F), CH₂(SnMe₂CH₂I)₂ ( 7 ), CH₂(SnMe₂CH₂Cl)₂ ( 8 ), cyclo‐Me₂Sn(CH₂SnMe₂CH₂)₂SiMe₂ ( 6 ), cyclo‐(Me₂SnCH₂)₄ ( 9 ), cyclo‐Me_(2?n)X_nSn(CH₂SiMe₂CH₂)₂SnX_nMe_(2?n) ( 5 , n=0; 10 , n = 1, X= Cl; 11 , n=1, X= F; 12 , n=2, X= Cl), and the chloride and fluoride complexes NEt₄[cyclo‐ Me(Cl)Sn(CH₂SiMe₂CH₂)₂Sn(Cl)Me?F] ( 13 ), PPh₄[cyclo‐Me(Cl)Sn(CH₂SiMe₂CH₂)₂Sn(Cl)Me?Cl] ( 14 ), NEt₄[cyclo‐Me(F)Sn(CH₂SiMe₂CH₂)₂Sn(F)Me?F] ( 15 ), [NEt₄]₂[cyclo‐Cl₂Sn(CH₂SiMe₂CH₂)₂SnCl₂?2 Cl] ( 16 ), M[Me₂Si(CH₂Sn(Cl)Me₂)₂?Cl] ( 17 a , M=PPh₄; 17 b , M=NEt₄), NEt₄[Me₂Si(CH₂Sn(Cl)Me₂)₂?F] ( 18 ), NEt₄[Me₂Si(CH₂Sn(F)Me₂)₂?F] ( 19 ), and PPh₄[Me₂Si(CH₂Sn(Cl)Me₂)₂?Br] ( 20 ). The compounds were characterised by electrospray mass‐spectrometric, IR and ¹H, ¹³C, ¹⁹F, ²⁹Si, and ¹¹⁹Sn NMR spectroscopic analysis, and, except for 15 and 18 , single‐crystal X‐ray diffraction studies.     

Werner Complexes with ω‐Dimethylaminoalkyl Substituted Ethylenediamine Ligands: Bifunctional Hydrogen‐Bond‐Donor Catalysts for Highly Enantioselective Michael Additions

The racemic carbonate complex [Co(en)₂O₂CO]⁺ Cl^? (en=1,2‐ethylenediamine) and (S)‐[H₃NCH((CH₂)_nNHMe₂)CH₂NH₃]³⁺ 3 Cl^? (n=1–4) react (water, charcoal, 100 °C) to give [Co(en)₂((S)‐H₂NCH((CH₂)_nNHMe₂)CH₂NH₂)]⁴⁺ 4 Cl^? ( 3 a – d H⁴⁺ 4 Cl^?) as a mixture of Λ/Δ diastereomers that separate on chiral‐phase Sephadex columns. These are treated with NaOH/Na⁺ BAr_f^? (BAr_f=B(3,5‐C₆H₃(CF₃)₂)₄) to give lipophilic Λ‐ and Δ‐ 3 a–d ³⁺ 3 BAr_f^?, which are screened as catalysts (10 mol %) for additions of dialkyl malonates to nitroalkenes. Optimal results are obtained with Λ‐ 3 c ³⁺ 3 BAr_f^? (CH₂Cl₂, ?35 °C; 98–82 % yields and 99–93 % ee for six β‐arylnitroethenes). The monofunctional catalysts Λ‐ and Δ‐[Co(en)₃]³⁺ 3 BAr_f^? give enantioselectivities of <10 % ee with equal loadings of Et₃N. The crystal structure of Δ‐ 3 a H⁴⁺ 4 Cl^? provides a starting point for speculation regarding transition‐state assemblies.     

Investigation of catalyst‐transfer condensation polymerization for the synthesis of n‐type π‐conjugated polymer,poly(2‐dioxaalkylpyridine‐3,6‐diyl)

Kumada‐Tamao coupling polymerization of 6‐bromo‐3‐chloromagnesio‐2‐(3‐(2‐methoxyethoxy)propyl)pyridine 1 with a Ni catalyst and Suzuki‐Miyaura coupling polymerization of boronic ester monomer 2 , which has the same substituted pyridine structure, with ^tBu₃PPd(o‐tolyl)Br were investigated for the synthesis of a well‐defined n‐type π‐conjugated polymer. We first carried out a model reaction of 2,5‐dibromopyridine with 0.5 equivalent of phenylmagnesium chloride in the presence of Ni(dppp)Cl₂ and then observed exclusive formation of 2,5‐diphenylpyridine, indicating that successive coupling reaction took place via intramolecular transfer of Ni(0) catalyst on the pyridine ring. Then, we examined the Kumada‐Tamao polymerization of 1 and found that it proceeded homogeneously to afford soluble, regioregular head‐to‐tail poly(pyridine‐2,5‐diyl), poly(3‐(2‐(2‐(methoxyethoxy)propyl)pyridine) (PMEPPy). However, the molecular weight distribution of the polymers obtained with several Ni and Pd catalysts was very broad, and the matrix‐assisted laser desorption ionization time‐of‐flight mass spectra showed that the polymer had Br/Br and Br/H end groups, implying that the catalyst‐transfer polymerization is accompanied with disproportionation. Suzuki‐Miyaura polymerization of 2 with ^tBu₃PPd(o‐tolyl)Br also afforded PMEPPy with a broad molecular weight distribution, and the tolyl/tolyl‐ended polymer was a major product, again indicating the occurrence of disproportionation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Generation and Reactivity of {(Ethane‐1,2‐diyl)bis[diisopropylphosphine‐κP]}‐{[2,4,6‐tri(tert‐butyl)phenyl]phosphino‐κP}rhodium ([Rh{PH(tBu3C6H2)}(iPr2PCH2CH2PiPr2)]): Catalytic C−P Bond Formation via Intramolecular C−H/P−H Dehydrogenative Cross‐Coupling

The complex [Rh(η³‐benzyl)(dippe)] ( 1 ; dippe=bis(diisopropylphosphino)ethane=(ethane‐1,2‐diyl)bis[diisopropylphosphine]) reacted cleanly with Mes*PH₂ ( 2 ; Mes*=2,4,6‐^tBu₃C₆H₂) to provide a new Rh species [Rh(H)(dippe)(L)] ( 3 ), L being the 2,3‐dihydro‐3,3‐dimethyl‐1H‐phosphindole ligand 4 (=^tBu₂C₆H₂(CMe₂CH₂PH)) (Scheme 1). Complex 3 was converted to the corresponding chloride [Rh(Cl)(dippe)(L)] ( 6 ) when treated with CH₂Cl₂, whereas the dimeric species [Rh₂{μ‐^tBu₂C₆H₂(CMe₂CH₂P)}(μ‐H)(dippe)₂] ( 7 ) was formed upon thermolysis in toluene (Scheme 2). The structures of 6 and 7 ⋅C₇H₈ were determined by X‐ray crystallography. Complexes 1 and 3 served as catalyst precursors for the dehydrogenative coupling of C−H and P−H bonds in the conversion of 2 to 4 (Scheme 3). Deuteration studies with Mes*PD₂ exposed a complex series of bond‐activation pathways that appear to involve C−H activation of the dippe ligand by the Rh‐atom (Schemes 4 and 5)     

Polymerization and copolymerization of functionalized 2‐alkoxy‐1‐methylenecyclopropanes to form new polymers having alkoxy substituents

The polymers with functionalized alkoxy groups and with narrow molecular weight distribution (M_w/M_n < 1.12) are obtained from the living polymerization of 2‐alkoxy‐1‐methylenecyclopropanes using π‐allylpalladium complex, [(PhC₃H₄)Pd(μ‐Cl)]₂, as the initiator. The polymers with oligoethylene glycol groups in the alkoxy substituent are soluble in water, and hydroboration of the C?C double bond and ensuing addition of the OH groups to C?N bond of alkyl isocyanate produce the polymers with urethane pendant groups. The reaction decreases solubility of the polymer in water significantly. Di‐ and triblock copolymers of the 2‐alkoxy‐1‐methylenecyclopropanes are prepared by consecutive addition of the two or three 2‐alkoxy‐1‐methylenecyclopropane monomers to the Pd initiator. The polymers which contain both hydrophobic butoxy or tert‐butoxy group and hydrophilic oligoethylene glycol group dissolve in water and/or organic solvents, depending on the substituents. The ¹H NMR spectrum of poly( 1a ‐b‐ 1h ) (? (CH₂C(?CH₂)CHOBu)_n? (CH₂C(?CH₂)CH(OCH₂CH₂)₃OMe)_m? ) in D₂O solution exhibits peaks because of the butoxy and ?CH₂ hydrogen in decreased intensity, indicating that the polymer forms micelle particles containing the hydrophilic segments in their external parts. Aqueous solution of the polymer with a small amount of DPH (DPH = 1,6‐diphenyl‐1,3,5‐hexatriene) shows the absorbance due to DPH at concentration of the polymer higher than 5.82 × 10^?5 g mL^?1. Other block copolymers such as poly( 1b ‐b‐ 1h ) and poly( 1a ‐b‐ 1g ) also form the micelles that contain DPH in their core. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 959–972, 2009     

Molecular Double‐Bond Covalent Radii for Elements Li–E112

The previous systems of triple‐bond and single‐bond self‐consistent, additive covalent radii, R(AB)=r(A)+ r(B), are completed with a fit for σ²π² double‐bonds.The primary bond lengths, R, are taken from experimental or theoretical data corresponding to chosen group valencies. All r(E) values are obtained from the same, self‐consistent fit. Many of the calculated primary data came from E?CH₂ and H? E?CH₂ models. Homonuclear LE?EL, formaldehyde‐type Group 14–Group 16 and open‐shell, X ³ Σ Group‐16 dimer data are included. The standard deviation for the 316 included data points is 3 pm.