Efficient Protocol for Reductive Amination of Aldehydes and Ketones with Sodium Borohydride in an Ionic Liquid/H2O System

The imines were generated in situ from carbonyl compounds and amines, which undergo smooth reduction with sodium borohydride in an ionic liquid/H₂O solvent system. The reaction conditions were very mild and neutral to afford the corresponding highly functionalized amines in excellent yields.     

Synthesis of Aryl Allyl Ether in the Recyclable Ionic Liquid [bmim]PF_6

Ionic liquids, especially imidazonium salts, have recently gained recognition as possible environmentally benign alternative chemical process solvents. This is mainly due to their nonvolatile nature, insolubility in some solvents as well as their ability to dissolve a wide range of organic and inorganic materials, allowing the ionic liquids easy recovery and recycling. Examples of their application in organic reactions have been summarized in a number of recent review articles. 1 Aryl allyl et…     

Nonaqueous microemulsion-containing ionic liquid [bmim][PF6] as polar microenvironment

The phase behavior of toluene/Triton X-100 (TX-100)/1-butyl-3-methylimidazolium hexafluorophosphate([bmim][PF6]) was studied. It was demonstrated that the single-phase microemulsion area covered about 75% of the phase diagram at 25 °C. Electrical conductivities of the system with different w ([bmim][PF6]-to-TX-100 molar ratio) values were determined, and the results were used to locate the sub-regions of the single-phase microemulsion. The results showed that a transform from [bmim][PF6]-in-oil ([bmim][PF6]/O) microstructure via a bicontinuous region to an oil-in-[bmim][PF6] (O/[bmim][PF6]) microstructure occurred with the increase of Φ (weight fraction of TX-100 and [bmim][PF6] in the system). The aggregate size of the reverse microemulsions of [bmim][PF6]/O was determined using small-angle X-ray scattering. The results showed that the size of the reverse microemulsions depended markedly on the w values.     

Efficient and Convenient Oxidation of Organic Halides to Aldehydes and Ketones Catalyzed by H5IO6/V2O5 in Ionic Liquid [bmpy][PF6]

A mild, efficient, and eco‐friendly procedure for the oxidation of organic halides to aldehydes and ketones in good to high yields catalyzed by H₅IO₆/V₂O₅ in ionic liquid [bmpy][PF₆] with no trace of overoxidation to carboxylic acids has been developed. The product can be isolated by a simple extraction with organic solvent, and the catalytic system can be recycled or reused without any significant loss of catalytic activity.     

Sm/AlCl3·6H2O体系促进的叠氮化合物的化学选择性还原:一种制备胺的新方法

在金属钐和六水合三氯化铝的存在下 ,叠氮化合物能在温和及中性条件下高产率地被还原为相应的胺     

4-Aza-N-Benzyl Bicyclo [2,2,2] Octyl Ammonium Borohydride a Highly Chemoselective Reagent for the Reduction of Aldehydes in the Presence of Ketones

The title compound reduces aldehydes in the presence of ketones with high chemoselectivity in t-butanol under reflux condition in high yields.     

离子液体[bmim][PF6]与[moemim][PF6]结构微不均匀性以及微粘度的光谱探测

室温离子液体由于其极低的蒸汽压、比较好的热稳定性和化学稳定性、良好的分子结构与性能的可设计性等优点,作为一种新型的环境友好溶剂在很多领域有着广泛的应用.对于离子液体的微观结构和微观性能的研究是设计新型离子液体以及扩展离子液体应用的关键.本文通过荧光探针分子香豆素153(C153)的转动动力学和对微观环境敏感的荧光探针分子1, 3-二(1-芘基)丙烷(BPP)的稳态荧光光谱,探测和表征了烷基取代的离子液体1-丁基-3-甲基咪唑六氟磷酸盐([bmim][PF₆])和与其具有相似结构的醚键官能化的离子液体1-甲氧基乙基-3-甲基咪唑六氟磷酸盐([moemim][PF₆])的微观结构和微粘度. C153探针分子在离子液体[bmim][PF₆]中的转动过程具有快、慢两个组分表明离子液体[bmim][PF₆]内部存在松散和紧密的两种结构微区;而C153探针分子在离子液体[moemim][PF₆]中的转动动力学只存在一种过程,说明醚键的引入使得[moemim][PF₆]内部趋于一种类型的微环境.通过C153探针分子的转动时间研究发现,醚键官能化的离子液体[moemim][PF₆]的微粘度小于烷基链取代的离子液体[bmim][PF₆],同时通过BPP探针分子的二聚体激基复合物(excimer)与单体(monomer)荧光发射强度的比值(I_E/I_M)研究也证明这一结果.醚键的引入使得离子液体[moemim][PF₆]相对于离子液体[bmim][PF₆],侧链的极性更大、柔顺性更好,同时醚键有可能作为氢键的受体与阳离子形成氢键从而削弱离子液体中阴、阳离子间的相互作用,使得离子液体[moemim][PF₆]的微观环境比离子液体[bmim][PF₆]更为均一,同时具有更小的微粘度.     

离子液体/水混合溶剂促进芳醛与罗丹宁的缩合反应

在室温条件下, 离子液体1-正丁基-3-甲基咪唑四氟硼酸盐([bmim]BF₄)与水组成的混合溶剂能有效催化一系列芳醛与罗丹宁反应, 以80%～93%的产率生成相应的5-芳亚甲基-2,4-噻唑二酮. 离子液体[bmim]BF₄催化活性高, 反应在10～120 min内完成. 实验结果表明该法反应条件温和、产率高、反应时间短、后处理简单、离子液体可重复使用.     

The coupling of aryl halides in the ionic liquid [bmim]PF6

Several aryl halides have been coupled using the zero valent nickel catalyst [(PPh₃)_nNi(0)], to give the biaryl in moderate to good yield, employing the ionic liquid [bmim]PF₆. The ionic liquid and catalyst were recycled after extraction of the biaryl.     

Green protocol for conjugate addition of thiols to alpha,beta-unsaturated ketones using a [bmim]PF6/H2O system

Alpha,beta-unsaturated ketones undergo conjugate addition rapidly with thiols in a hydrophobic ionic liquid [bmim]PF(6)/H(2)O solvent system (2:1) in the absence of any acid catalyst to afford the corresponding Michael adducts in high to quantitative yields with excellent 1,4-selectivity under mild and neutral conditions. The enones show enhanced reactivity in ionic liquids, thereby reducing reaction times and improving the yields significantly. The use of ionic liquids helps to avoid the use of either acid or base catalysts for this conversion. The recovered ionic liquid was reused four to five times with consistent activity.     

A New Simple and Efficient Synthesis of N-Aryl Phthalimides in Ionic Liquid [bmim][PF6]

Abstract

The room temperature ionic liquid [bmim][PF₆], namely 1-butyl-3-methyl-imidazolium hexafluorophosphate, is used as an alternative solvent to classic solvents for the synthesis of a series of N-aryl phthalimides in good to excellent yields.     

Sm/AlCl3·6H2O体系促进的叠氮化合物的化学选择性还原:一种制备胺的新方法

在金属钐和六水合三氯化铝的存在下,叠氮化合物能在温和及中性条件下高产率地被还原为相应的胺.     

相容的聚甲基丙烯酸甲酯/[C12 MIM][PF6]离子液体体系在超临界CO2中的发泡性能

通过快速卸压法, 以超临界CO2为物理发泡剂, 研究了相容的聚甲基丙烯酸甲酯(PMMA)/1-n-十二烷基-3-甲基咪唑六氟磷酸盐([C12 MIM][PF6])离子液体(IL)复合体系的发泡性能. 加入IL后, PMMA对CO2的吸收量增加; 复合体系的玻璃化转变温度(Tg)随IL含量的增加而降低. IL对PMMA发泡行为的影响取决于发泡条件. 在较低温度和压力下, 纯PMMA无法发泡, IL的加入可促进泡孔形成; 提高温度和压力, 纯PMMA可以发泡, IL的加入在提高泡孔尺寸的同时使泡孔仍然保持尺寸分布均匀的微米级结构.     

Influencing the regioselectivity of lipase-catalyzed hydrolysis with [bmim]PF6

An easy preparation of mono-deprotected thioglucopyranosides via a selective Candica cylindracea lipase-catalyzed hydrolysis of a commercially available peracetylated precursor is described. Especially, ethyl 2,3,4-tri-O-acetyl-1-thio-β-d-glucopyranoside and ethyl 2,3,6-tri-O-acetyl-1-thio-β-d-glucopyranoside were obtained in 100% and 54% isolated yields, respectively. The influence of the ratio of [bmim]PF₆/buffer toward the regioselectivity of the deacetylation step and the acyl migration is discussed.     

Synthesis of 2-Arylquinazolin-4(3H)-one Derivatives Catalyzed by Iodine in [bmim+][ ]

Controlling selectivity of the reactions of aromatic aldehydes and 2-aminobenzamide in ionic liquid catalyzed by iodine at either room temperature or at 80 °C under nitrogen resulted in the synthesis of (E)-Schiff bases, 2,3-dihydro-2-arylquinazolin-4(1H)-one and 2-arylquinazolin-4(3H)-one derivatives, in excellent yields.     

Selective alkylation of phenol with tert-butyl alcohol catalyzed by [bmim]PF6

Alkylation of phenol with tert-butyl alcohol (TBA) in a room temperature ionic liquid, 1-butyl-3-methylimidazoliumhexafluorophosphate ([bmim]PF₆), has been investigated. The effects of various parameters such as reaction temperature, reaction time, reactant ratio (mol ratio of phenol to that of TBA), and the amount of the ionic liquid used were studied. The [bmim]PF₆ ionic liquid was found to catalyze the reaction with high conversion and good selectivity.     

[Bmim]Br3对酮的选择性单溴化反应

在无溶剂和室温条件下, 三溴化1-丁基-3-甲基咪唑([Bmim]Br₃)选择性地与酮反应, 以90%～96%的产率生成相应的α-溴代酮. 该方法反应条件温和、产率高、选择性好、环境友好.     

3-甲基噻吩在离子液体 BMIMPF6中的电化学聚合、表征及应用

Poly-3-methylthiophene （P3MT） was synthesized in the room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate （[BMIM]PF6） by constant potential and constant current respectively. The structure and morphology of P3MT films were characterized by FTIR spectrum and SEM. The undoped （reduction） and doped （oxidation） forms of P3MT film prepared in ionic liquid were reversible and stable. The P3MT film has strong characteristics of electrocatalytic oxidation of ascorbic acid and can separate the oxidation peaks of ascorbic acid and dopamine. Two methods of potential steps were used to observe the response time of the film and the film was found to have perfect electrochromic response.     

One-Pot Etherification of Ketones and Aldehydes with Organic Halides Using Sodium Hydride as a Reductant

One-pot etherification reaction of aromatic and some aliphatic carbonyl compounds with organic halides in the presence of sodium hydride as a reducing reagent proceeded smoothly in dioxane, a polar solvent with higher boiling point, to provide desired ethers in moderate to high yields.