Microfluidic system for dielectrophoretic separation based on a trapezoidal electrode array

This paper presents a novel microfluidic device for dielectrophoretic separation based on a trapezoidal electrode array (TEA). In this method, particles with different dielectric properties are separated by the device composed of the TEA for the dielectrophoretic deflection of particles under negative dielectrophoresis (DEP) and poly(dimethylsiloxane)(PDMS) microfluidic channel with a sinuous and expanded region. Polystyrene microparticles are exposed to an electric field generated from the TEA in the microfluidic channel and are dielectrophoretically focused to make all of them line up to one sidewall. When these particles arrive at the region of another TEA for dielectrophoretic separation, they are separated having different positions along the perpendicular direction to the fluid flow due to their different dielectrophoretic velocities. To evaluate the separation process and performance, both the effect of the flow rate on dielectrophoretic focusing and the influence of the number of trapezoidal electrodes on dielectrophoretic separation are investigated. Now that this method utilizes the TEA as a source of negative DEP, non-specific particle adhering to the electrode surface can be prevented; conventional separation approaches depending on the positive DEP force suffer from this problem. In addition, since various particle types are continuously separated, this method can be easily applicable to the separation and analysis of various dielectric particles with high particle recovery and selectivity.     

Polarization behavior of polystyrene particles under direct current and low‐frequency (<1 kHz) electric fields in dielectrophoretic systems

The relative polarization behavior of micron and submicron polystyrene particles was investigated under direct current and very low frequency (<1 kHz) alternating current electric fields. Relative polarization of particles with respect to the suspending medium is expressed in terms of the Clausius–Mossotti factor, a parameter of crucial importance in dielectrophoretic‐based operations. Particle relative polarization was studied by employing insulator‐based dielectrophoretic (iDEP) devices. The effects of particle size, medium conductivity, and frequency (10–1000 Hz) of the applied electric potential on particle response were assessed through experiments and mathematical modeling with COMSOL Multiphysics^®. Particles of different sizes (100–1000 nm diameters) were introduced into iDEP devices fabricated from polydimethylsiloxane (PDMS) and their dielectrophoretic responses under direct and alternating current electric fields were recorded and analyzed in the form of images and videos. The results illustrated that particle polarizability and dielectrophoretic response depend greatly on particle size and the frequency of the electric field. Small particles tend to exhibit positive DEP at higher frequencies (200–1000 Hz), while large particles exhibit negative DEP at lower frequencies (20–200 Hz). These differences in relative polarization can be used for the design of iDEP‐based separations and analysis of particle mixtures.     

Brownian Motion and Large Electric Polarizabilities Facilitate Dielectrophoretic Capture of Sub-200 nm Gold Nanoparticles in Water

Dielectrophoresis can move small particles using the force resulting from their polarization in a divergent electric field. In liquids, it has most often been applied to micrometric objects such as biological cells or latex microspheres. For smaller particles, the dielectrophoretic force becomes very small and the phenomenon is furthermore perturbed by Brownian motion. Whereas dielectrophoresis has been used for assembly of superstructures of nanoparticles and for the detection of proteins and nucleic acids, the mechanisms underlying DEP of such small objects require further study. This work presents measurements of the alternating-current (AC) dielectrophoretic response of gold nanoparticles of less than 200 nm diameter in water. An original dark-field digital video-microscopic method was developed and used in combination with a microfluidic device containing transparent thin-film electrodes. It was found that the dielectrophoretic force is only effective in a small zone very close to the tip of the electrodes, and that Brownian motion actually facilitates transport of particles towards this zone. Moreover, the fact that particles as small as 80 nm are still efficiently captured in our device is not only due to Brownian transport but also to an effective polarizability that is larger than what would be expected on basis of current theory for a sphere in a dielectric medium.     

Characterization of particle capture in a sawtooth patterned insulating electrokinetic microfluidic device

Here we present a scheme to separate particles according to their characteristic physical properties, including size, charge, polarizability, deformability, surface charge mobility, dielectric features, and local capacitance. Separation is accomplished using a microdevice based on direct current insulator gradient dielectrophoresis that can isolate and concentrate multiple analytes simultaneously at different positions. The device is dependent upon dielectrophoretic and electrokinetic forces incorporating a global longitudinal direct current field as well as using shaped insulating features within the channel to induce local gradients. This design allows for the production of strong local field gradients along a global field causing particles to enter, initially transported through the channel by electrophoresis and electroosmosis (electrokinetics), and to be isolated via repulsive dielectrophoretic forces that are proportional to an exponent of the field gradient. Sulfate-capped polystyrene nano and microparticles (20, 200 nm, and 1 μm) were used as probes to demonstrate the influence of channel geometry and applied longitudinal field on separation behavior. These results are consistent with models using similar channel geometry and indicate that specific particulate species can be isolated within a distinct portion of the device, whereas concentrating particles by factors from 10(3) to 10(6).     

Passivated‐electrode insulator‐based dielectrophoretic separation of heterogeneous cell mixtures

Rapid and accurate purification of various heterogeneous mixtures is a critical step for a multitude of molecular, chemical, and biological applications. Dielectrophoresis has shown to be a promising technique for particle separation due to its exploitation of the intrinsic electrical properties, simple fabrication, and low cost. Here, we present a geometrically novel dielectrophoretic channel design which utilizes an array of localized electric fields to separate a variety of unique particle mixtures into distinct populations. This label‐free device incorporates multiple winding rows with several nonuniform structures on to sidewalls to produce high electric field gradients, enabling high locally generated dielectrophoretic forces. A balance between dielectrophoretic forces and Stokes’ drag is used to effectively isolate each particle population. Mixtures of polystyrene beads (500 nm and 2 μm), breast cancer cells spiked in whole blood, and for the first time, neuron and satellite glial cells were used to study the separation capabilities of the design. We found that our device was able to rapidly separate unique particle populations with over 90% separation yields for each investigated mixture. The unique architecture of the device uses passivated‐electrode insulator‐based dielectrophoresis in an innovative microfluidic device to separate a variety of heterogeneous mixture without particle saturation in the channel.     

Differential transport of DNA by a rectified Brownian motion device

An interdigitated electrode array (IDEA) device has been designed and used to transport DNA based on a Brownian ratchet mechanism. This migration is produced by the periodic formation of an asymmetric sawtooth electric field in the device. Oligonucleotides of 25, 50, and 100 bases in length were tested using two different array geometries. DNA transport as a function of DNA size, electric field frequency, and array geometry is shown to be in qualitative agreement with theory. Such a device could provide for DNA separations over a broad size range, and can be readily scaled as a component in a microfabricated DNA analysis system.     

Recent advances in direct current electrokinetic manipulation of particles for microfluidic applications

Microfluidic devices have been extensively used to achieve precise transport and placement of a variety of particles for numerous applications. A range of force fields have thus far been demonstrated to control the motion of particles in microchannels. Among them, electric field‐driven particle manipulation may be the most popular and versatile technique because of its general applicability and adaptability as well as the ease of operation and integration into lab‐on‐a‐chip systems. This article is aimed to review the recent advances in direct current (DC) (and as well DC‐biased alternating current) electrokinetic manipulation of particles for microfluidic applications. The electric voltages are applied through electrodes that are positioned into the distant channel‐end reservoirs for a concurrent transport of the suspending fluid and manipulation of the suspended particles. The focus of this review is upon the cross‐stream nonlinear electrokinetic motions of particles in the linear electroosmotic flow of fluids, which enable the diverse control of particle transport in microchannels via the wall‐induced electrical lift and/or the insulating structure‐induced dielectrophoretic force.     

Continuous dielectrophoretic separation of particles in a spiral microchannel

Particle separation is a fundamental operation in the areas of biology and physical chemistry. A variety of force fields have been used to separate particles in microfluidic devices, among which electric field may be the most popular one due to its general applicability and adaptability. So far, however, electrophoresis‐based separations have been limited primarily to batchwise processes. Dielectrophoresis (DEP)‐based separations require in‐channel micro‐electrodes or micro‐insulators to produce electric field gradients. This article introduces a novel particle separation technique in DC electrokinetic flow through a planar double‐spiral microchannel. The continuous separation arises from the cross‐stream dielectrophoretic motion of particles induced by the non‐uniform electric field inherent to curved channels. Specifically, particles are focused by DEP to one sidewall of the first spiral, and then dielectrophoretically deflected toward the other sidewall of the second spiral at a particle‐dependent rate, leading to focused particle streams along different flow paths. This DEP‐based particle separation technique is demonstrated in an asymmetric double‐spiral microchannel by continuously separating a mixture of 5/10 μm particles and 3/5 μm particles.     

Negative dielectrophoresis-based particle separation by size in a serpentine microchannel

Dielectrophoresis has been widely used to focus, trap, concentrate, and sort particles in microfluidic devices. This work demonstrates a continuous separation of particles by size in a serpentine microchannel using negative dielectrophoresis. Depending on the magnitude of the turn-induced dielectrophoretic force, particles travelling electrokinetically through a serpentine channel either migrate toward the centerline or bounce between the two sidewalls. These distinctive focusing and bouncing phenomena are utilized to implement a dielectrophoretic separation of 1 and 3 μm polystyrene particles under a DC-biased AC electric field of 880 V/cm on average. The particle separation process in the entire microchannel is simulated by a numerical model.     

Dielectrophoretic levitation in the presence of shear flow: implications for colloidal fouling of filtration membranes

The ability of dielectrophoretic (DEP) forces created using a microelectrode array to levitate particles in a colloidal suspension is studied experimentally and theoretically. The experimental system employs microfabricated electrode arrays on a glass substrate to apply repulsive DEP forces on polystyrene latex particles suspended in an aqueous medium. A numerical model based on the convection-diffusion-migration equation is presented to calculate the concentration distribution of colloidal particles in shear flow under the influence of a repulsive DEP force field. The results obtained from the numerical simulations are compared against trajectory analysis results and experimental data. The results indicate that by incorporating ac electric field-induced DEP forces in a shear flow, particle accumulation and deposition on the flow channel surfaces can be significantly reduced or even completely averted. The mathematical model is then used to indicate how the deposition behavior is modified in the presence of a permeable substrate, representative of tangential flow membrane filtration operations. The results indicate that the repulsive dielectrophoretic (DEP) forces imparted to the particles suspended in the feed can be employed to mitigate membrane fouling in a cross-flow filtration process.     

Individual strings of conducting carbon cones and discs in a polymer matrix: Electric field‐induced alignment and their use as a strain sensor

We demonstrate micromechanical strain sensors with integrated readout based on carbon nanocones and discs (CNCs) which are aligned into a string‐like formation using an alternating electric field and studied by AC impedance spectroscopy and electromechanical methods. The CNC particles are first dispersed into a polymer matrix with a particle fraction of 0.1 vol %. This value is well below the percolation threshold (～ 2 vol %), which suppresses particle aggregation and facilitates transparency allowing the use of an UV‐curable polymer. Alignment was carried out with a 1 kHz, 4 kV/cm electric field and is a consequence of dielectrophoretic effect. It develops in minutes and makes the initially insulating, nonaligned material conductive. This is followed by UV curing of the polymer matrix, which renders a solid state device. The stretching of the aligned strings in the cured polymer leads to a reversible piezoresistive effect, and a gauge factor of about 50 is observed. This is in a sharp contrast to CNC films with particle fraction above percolation threshold (13 vol %), which are conductive but not sensitive to stretching. The strings are Ohmic in nature and moreover show higher DC conductivity (22–500 S/m) compared to identically prepared carbon black strings (1–22 S/m). © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Dielectrophoretic manipulation of suspended submicron particles

Planar and three-dimensiònal multi-electrode systems with dimensions of 2 - 40 microm were fabricated by IC technology and used for trapping and aggregation of microparticles. To achieve negative dielectrophoresis (repelling forces) in aqueous solution, radiofrequency (RF) electric fields were used. Experimentally, particles down to 100 nm in diameter were enriched and trapped as aggregates in field cages and dielectrophoretic microfilters and observed using confocal fluorimetry. Theoretically, single particles with an effective diameter down to about 35 nm should be trappable in micron field cages. Due to the unavoidable Ohmic heating, RF electric fields can induce liquid streaming in extremely small channels (12 microm in height). This can be used for pumping and particle enrichment but it enhances Brownian motion and counteracts dielectrophoretic trapping. Combining Brownian motion with ratchet-like dielectrophoretic forces enables the creation of Brownian pumps that could be used as sensitive separation devices for submicron particles if liquid pumping is avoided in smaller structures.     

A continuous DC-insulator dielectrophoretic sorter of microparticles

A lab-on-a-chip device is described for continuous sorting of fluorescent polystyrene microparticles utilizing direct current insulating dielectrophoresis (DC-iDEP) at lower voltages than previously reported. Particles were sorted by combining electrokinetics and dielectrophoresis in a 250 μm wide PDMS microchannel containing a rectangular insulating obstacle and four outlet channels. The DC-iDEP particle flow behaviors were investigated with 3.18, 6.20 and 10 μm fluorescent polystyrene particles which experience negative DEP forces depending on particle size, DC electric field magnitude and medium conductivity. Due to negative DEP effects, particles are deflected into different outlet streams as they pass the region of high electric field density around the obstacle. Particles suspended in dextrose added phosphate buffer saline (PBS) at conductivities ranging from 0.50 to 8.50 mS/cm at pH 7.0 were compared at 6.85 and 17.1 V/cm. Simulations of electrokinetic and dielectrophoretic forces were conducted with COMSOL Multiphysics^® to predict particle pathlines. Experimental and simulation results show the effect of medium and voltage operating conditions on particle sorting. Further, smaller particles experience smaller iDEP forces and are more susceptible to competing nonlinear electrostatic effects, whereas larger particles experience greater iDEP forces and prefer channels 1 and 2. This work demonstrates that 6.20 and 10 μm particles can be independently sorted into specific outlet streams by tuning medium conductivity even at low operating voltages. This work is an essential step forward in employing DC-iDEP for multiparticle sorting in a continuous flow, multiple outlet lab-on-a-chip device.     

DC-dielectrophoretic separation of microparticles using an oil droplet obstacle

A new dielectrophoretic particle separation method is demonstrated and examined in the following experimental study. Current electrodeless dielectrophoretic (DEP) separation techniques utilize insulating solid obstacles in a DC or low-frequency AC field, while this novel method employs an oil droplet acting as an insulating hurdle between two electrodes. When particles move in a non-uniform DC field locally formed by the droplet, they are exposed to a negative DEP force linearly dependent on their volume, which allows the particle separation by size. Since the size of the droplet can be dynamically changed, the electric field gradient, and hence DEP force, becomes easily controllable and adjustable to various separation parameters. By adjusting the droplet size, particles of three different diameter sizes, 1 microm, 5.7 microm and 15.7 microm, were successfully separated in a PDMS microfluidic chip, under applied field strength in the range from 80 V cm-1 to 240 V cm-1. A very effective separation was realized at the low field strength, since the electric field gradient was proved to be a more significant parameter for particle discrimination than the applied voltage. By utilizing low strength fields and adaptable field gradient, this method can also be applied to the separation of biological samples that are generally very sensitive to high electric potential.     

Concentrating colloids with electric field gradients. I. Particle transport and growth mechanism of hard-sphere-like crystals in an electric bottle

This work concerns the use of electric field gradients to manipulate the local particle concentration in a hard-sphere-like suspension. Inside a specially designed "electric bottle," we observed our colloids to collect in the regions of lowest field strength ("negative dielectrophoresis"). This allows for the use of larger field gradients and stronger dielectrophoretic forces than in the original electric bottle design, which was based on positive dielectrophoresis [M. T. Sullivan et al., Phys. Rev. Lett. 96, 015703 (2006)]. We used confocal scanning laser microscopy to quantitatively follow the time-dependent change in the particle density and the suspension structure. Within a few days, the dielectrophoretic compression was seen to initiate a heterogeneouslike growth of large single crystals, which took place far out-of-equilibrium. The crystals had a random hexagonal close-packed structure and displayed an intriguing growth mechanism, during which the entire crystal was continuously transported, while growing both on the "high-field" and the "low-field" sides, although at different rates. After switching off the electric field, the compressed crystals were found to relax to a lower packing fraction and melt, at a much slower rate than the crystal growth. Besides revealing the particular (far out-of-equilibrium) crystal growth mechanism in these electric bottles, our observations also shed light on the role of the different particle transport processes in the cell and some of the relevant tuning parameters. This is useful for different types of experiments, for instance, focusing more on melting, homogeneous crystallization, or the glass transition.     

A novel concept of dielectrophoretic engine oil filter

A novel concept of an alternating current (AC) dielectrophoretic filter with a three-dimensional electrode array is presented. A filter is constructed by winding into layers around the core tube two sheets of woven metal wire-mesh with several sheets of woven insulating wire-mesh sandwiched in between. Contrary to conventional dielectrophoretic devices, the proposed design of electrodes generates a high-gradient field over a large working volume by applying several hundred volts at a standard frequency of 60?Hz. The operating principle of filtration is based on our recently developed method of AC dielectrophoretic gating for microfluidics. The filtration efficiency is expressed in terms of two non-dimensional parameters, which describe the combined influence of the particle polarizability and size, the oil viscosity and flow rate, and the field gradient on the particle captivity. The proof-of-concept is tested by measuring the single-pass performance of two filters on positively polarized particles dispersed in engine oil: spherical glass beads, fused aluminum oxide powder, and silicon metal powder, all smaller than the mesh opening. The results obtained are used to consider the potential of using AC dielectrophoretic filtration and provide critical design guidelines for the development of a filter based on the retention capability of challenge particles.     

An exactly solvable Ogston model of gel electrophoresis: X. Application to high-field separation techniques

Recently, we generalized our lattice model of gel electrophoresis to study the net velocity of particles being pulled by a high-intensity electric field through an arbitrary distribution of immobile obstacles (Gauthier, M. G., Slater, G. W., J. Chem. Phys. 2002, 117, 6745-6756). In this article, we show how the high-field version of our model can be used to compare the velocity of particles with different electric charges and/or physical sizes. We then investigate specific two-dimensional distributions of obstacles that can be used to separate particles, e.g., in a microfluidic device. More precisely, we compare the velocity of differently charged or sized analytes in sieving, trapping and deflecting systems to model various electrophoretic separation techniques. In particular, we study the nonlinear effects present in ratchet systems and how they can be combined with time-asymmetric pulsed fields to provide new modes of separation.     

Insulator-based dielectrophoretic focusing and trapping of particles in non-Newtonian fluids

Insulator-based dielectrophoretic (iDEP) microdevices have been limited to work with Newtonian fluids. We report an experimental study of the fluid rheological effects on iDEP focusing and trapping of polystyrene particles in polyethylene oxide, xanthan gum, and polyacrylamide solutions through a constricted microchannel. Particle focusing and trapping in the mildly viscoelastic polyethylene oxide solution are slightly weaker than in the Newtonian buffer. They are, however, significantly improved in the strongly viscoelastic and shear thinning polyacrylamide solution. These observed particle focusing behaviors exhibit a similar trend with respect to electric field, consistent with a revised theoretical analysis for iDEP focusing in non-Newtonian fluids. No apparent focusing of particles is achieved in the xanthan gum solution, though the iDEP trapping can take place under a much larger electric field than the other fluids. This is attributed to the strong shear thinning-induced influences on both the electroosmotic flow and electrokinetic/dielectrophoretic motions.     

3-D electrode designs for flow-through dielectrophoretic systems

Traditional methods of dielectrophoretic separation using planar microelectrodes have a common problem: the dielectrophoretic force, which is proportional to nabla|E|2, rapidly decays as the distance from the electrodes increases. Recent advances in carbon microelectromechanical systems have allowed researchers to create carbon 3-D structures with relative ease. These developments have opened up new possibilities in the fabrication of complex 3-D shapes. In this paper, the use of 3-D electrode designs for high-throughput dielectrophoretic separation/concentration/filtration systems is investigated. 3-D electrode designs are beneficial because (i) they provide a method of extending the electric field within the fluid. (ii) The 3-D electrodes can be designed so that the velocity field coincides with the electric field distribution. (iii) Novel electrode designs, not based on planar electrodes designs, can be developed and used. The electric field distribution and velocity fields of 3-D electrode designs that are simple extensions of 2-D designs are presented, and two novel electrode designs that are not based on 2-D electrode designs are introduced. Finally, a proof-of-concept experimental device for extraction of nanofibrous carbon from canola oil is demonstrated.     

Dielectrophoresis of an inhomogeneous colloidal particle under an inhomogeneous field: a first-principles approach

In reality, colloidal particles often possess an arbitrary inhomogeneity profile. We present a first-principles approach to dielectrophoresis of such an inhomogeneous colloidal particle under an inhomogeneous field of an oscillating electric dipole moment. For numerical simulations, we treat the inhomogeneous particle as a specific graded one with a physically motivated dielectric model and conductivity profile. We find that both multipolar interactions and spatial fluctuations inside the particle can affect the dielectrophoretic spectrum of the particle significantly.