Preparation and characterization of poly glycidyl methacrylete–zirconium dioxide–β-cyclodextrin composite matrix for separation of isoflavones through expanded bed adsorption

The specially prepared adsorbent is most important in realizing the expanded bed adsorption (EBA) process. In the present work, a novel poly glycidyl methacrylete–zirconium dioxide–β-cyclodextrin (PGMA–ZrO₂–β-CD) composite matrix for EBA has been first prepared. Wet density, water content and pore properties of the composite beads have been investigated, which shows good expansion and stability in EBA. The application of custom-made adsorbent has been investigated to recover isoflavones from soy molasses. The recovery is up to 90% and the purity of isoflavones obtained is 75.4%. Compared with the traditional purification processes, EBA has the advantage of high efficiency and integrality, which leads to large reduction in operation time and cost.     

Preparation and clay stabilization properties of cationic acrylamide polymer containing β-cyclodextrin

Research on Chemical Intermediates - In this study, a new family of short-chain cationic polymer, P(A-β-CD/AM/ATMAC), was synthesized via free radical-initiated aqueous system...     

Inclusion of the regioisomeric nitrobenzene derivatives and ferrocene guests by β-cyclodextrin polymer and their transport through the polymer matrix

Host-guest equilibria have been investigated involving inclusion sites of the microparticulate amorphous β-cyclodextrin polymer, β-CDP-25, and a range of redox guests comprising regioisomeric nitrobenzene derivatives and ferrocene. The equilibria were studied by the batch method. Inclusion-governed, Langmuir-type sorption equilibria occurred in the β-CDP-25/guest systems studied in 1:1 (v/v) aqueous methanolic solutions. A 1:1 (host inclusion site)/guest stoichiometry was found and sorption equilibrium constants were determined. The values of the constants changed by a factor of 20 between the most weakly and strongly included guests. Regioselective discrimination of β-CDP-25 was most pronounced with respect to nitrophenols. Transport phenomena of guest molecules in the β-CDP-25 matrix have also been studied. The apparent diffusion coefficients of guest molecules were determined in the β-CDP-25 matrix by chronamperometry at the (β-CDP-25)-PTFE-carbon composite electrodes. These diffusion coefficients were almost four orders of magnitude lower than the corresponding coefficients of guest molecules in solution in the absence of β-CD. The diffusion mechanism was postulated for the guest molecules in the β-CDP-25 matrix, which invoked hopping of the molecules between inclusion sites.     

Preparation and characterization of cross-linked β-cyclodextrin polymer/Fe_3O_4 composite nanoparticles with core-shell structures

Cross-linkedβ-cyclodextrin polymer/Fe₃O₄ composite nanoparticles with core-shell structures were prepared via cross linking reaction on the surface of carboxymethylβ-cyclodextrin（CM-β-CD） modified Fe₃O₄ nanoparticles inβ-cyclodextrin alkaline solution by using epichlorohydrin as crosslinking agent.The morphology,structure and magnetic properties of the prepared composite nanoparticles were investigated by transmission electron microscopy（TEM）,Fourier transform infrared（FTIR） spectrometry,X-ray diffraction（XRD） measurement,thermogravimetric analysis（TGA） and Vibrating sample magnetometry （VSM）,respectively.     

Enantiodiscrimination of equol in β-cyclodextrin: an experimental and computational study

The interaction between the equol enantiomers and β -cyclodextrin is studied by molecular mechanics and molecular dynamics calculations. The chromatographic retention order is determined by these theoretical methods and compared with experimental findings. In the molecular mechanics calculations, the simultaneous relaxation of the host and the guest molecules is allowed, both in a vacuum and in aqueous solution. In the molecular dynamics calculations, the interaction energy between each enantiomer and the cavity is determined carrying out a simulation of 12 trajectories with different initial conditions at constant temperature (293 K), and minimising the energy of the structures extracted along the trajectories. To determine the preferential binding site and orientation of each guest molecule, the numerical density of presence in a volume element is calculated and compared with regions of maximum enantioselectivity. The more stable complex predicted in both cases is formed with R-equol, in agreement with experimental results.     

Spectral properties and structures of supramolecular complexes of naphthylpyridine with β-cyclodextrin

The electronic absorption and fluorescence spectra of 4-(2-naphthyl)pyridine (1) and N-methyl-4-(2-naphthyl)pyridinium perchlorate (2 ⁺·ClO₄ ^–) were studied in aqueous solutions in the absence and presence of -cyclodextrin (-CD). In aqueous solutions and organic solvents in the presence of water or H⁺ ions, compound 1 exhibits intense fluorescence with a maximum at 21 270 cm^–1, and its quantum yield in an aqueous solution is 0.9±0.09. The same fluorescence spectrum was detected for an aqueous solution of 2 ⁺·ClO₄ ^–. In an aqueous solution, compound 1 and -CD form stable fluorescing supramolecular 2:2 complexes, whose structure was calculated by the quantum-chemical MNDO/PM3 method. The formation of these complexes induces a hypsochromic shift of the fluorescence maximum of 1 by 5000 cm^–1. The stability constant of the complex is 2·10³ L mol^–1. A decrease in the pH results in the formation of a protonated form of 1(1·H⁺) and destruction of the complex, thus favoring the escape of the substrate from the -CD cavity. The quantum-chemical calculations showed that the insertion of 1 into the -CD cavity is thermodynamically more favorable than hydration; on the contrary, the formation of 1·H⁺ increases dramatically the hydration energy, which promotes the escape of 1·H⁺ from the -CD cavity; cation 2 ⁺ does not form a complex with -CD; in the thermodynamically most favorable 2:2 complex, the naphthalene fragments of two molecules 1 are parallel to each other in a broad section of the -CD dimer constructed according to the head-to-head type.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2420–2425, November, 2004.     

Electrochromic and photoelectrochromic properties of sol–gel derived tungsten trioxide/titania composite thin films

Tungsten trixoide/titania (WO₃-titania) composite thin films with W/Ti molar ratios of 100/0, 98/2, 96/4, 94/6 92/8 and 90/10 were prepared on fluorine-doped tin oxide conducting glass, and their electrochromic (EC) and photoelectrochromic (PEC) performances were investigated in this study. The composite thin films were synthesized by sol–gel process using peroxotungstic acid and titanium (IV) n-butoxide as the precursors. The surface morphology and composition of the composite thin films were characterized using scanning electron microscope with energy dispersive spectrometer. Electrochemical experiments with in situ spectroscopic measurement were employed to study the EC properties of the composite thin films. It was found that the presence of titania in the WO₃ matrix might slightly decreases its EC performance. PEC cells using the composite thin films as the working electrode and a sputtered semitransparent platinum thin film on ITO as the counter electrode were fabricated and their PEC performances were investigated. The device using composite thin film prepared from sol solution with a W/Ti molar ratio of 96/4 exhibited the best PEC performance.     

Dispersive solid phase extraction of metronidazole and clarithromycin from human plasma using a β-cyclodextrin grafted polyethylene polymer composite

In this work, for the first time, a polymeric composite based on β-cyclodextrin grafted with polyethylene has been prepared through ball milling and used as an efficient sorbent for dispersive solid phase extraction of metronidazole and clarithromycin from plasma samples. The prepared sorbent was characterized using Fourier transform infrared spectrophotometry, X-ray diffraction, and scanning electron microscopy. In the extraction process, after precipitating the proteins, the sorbent was added into the sample solution, and the mixture was vortexed to facilitate and speed up the sorption of the analytes onto the sorbent surface. After centrifuging, the sorbent particles were contacted with methanol to elute the analytes under the vortexing process. After this step, an aliquot of the eluate was taken and injected into high-performance liquid chromatography–diode array detector for quantitative analysis. Under the optimum extraction conditions, the extraction recoveries for metronidazole and clarithromycin were 76 and 83%, respectively. The limits of detection were 2.6 and 2.2 ng/ml for metronidazole and clarithromycin, respectively. The repeatability of the offered approach, expressed as relative standard deviation, was equal to or less than 4.7%. Finally, the method was successfully applied to plasma samples of the patients treated with metronidazole and clarithromycin.     

Interaction of naproxen with β-cyclodextrin and its derivatives/polymer: experimental and molecular modeling studies

The interaction of naproxen with β-cyclodextrin and its derivatives (hosts) as well as polymer has been studied using UV Visible (UV–Vis), Fourier Transform Infrared (FTIR), Nuclear Magnetic Resonance (NMR) spectroscopy and Scanning electron microscopy (SEM). In this paper, the solid inclusion complexes were prepared by freeze drying method. The formation constants of the complexes were determined by UV–Vis method. The adsorption properties of naproxen with β-Cyclodextrin bonded silica stationary phase (CDS) were studied for an in-depth understanding of the host–guest interaction. The inclusion process involving naproxen and hosts was investigated by using the PM3 quantum–mechanical semiempirical method. The stabilization energy values obtained from the semiempirical calculation showed the same relation with the formation constant values determined by UV–Vis spectroscopy.     

Water-insoluble β-cyclodextrin polymer crosslinked by citric acid: synthesis and adsorption properties toward phenol and methylene blue

Water-insoluble β-cyclodextrin polymer (β-CDP) crosslinked by citric acid was obtained with a yield of 65% through an environment friendly synthesis procedure. FT-IR spectra disclosed that the hydroxyl groups of β-CD had reacted and condensated with the carboxyl groups of citric acid, and at the same time the structural characteristics of β-CD were essentially maintained in β-CDP. The β-CDP exhibited notable adsorption capability toward phenol (q _max = 13.8 mg g^?1) and especially large adsorption capability toward methylene blue (q _max = 105 mg g^?1). The concentration of methylene blue in water could be reduced to 0.11 mg L^?1 by the β-CDP, indicating the excellent adsorption sensitivity of β-CDP toward methylene blue. The adsorption results disclosed that the interior cavity and inclusion property of β-CD were maintained in the synthesized β-CDP.     

Inclusion complexes of Sulconazole with β-cyclodextrin and hydroxypropyl β-cyclodextrin: characterization in aqueous solution and in solid state

Complexation between sulconazole (SULC), an imidazole derivative with in vitro antifungal and antiyeast activity, and β-cyclodextrins (β-CD and HP-β-CD) was studied in solution and in solid states. Complexation in solution was evaluated using solubility studies and nuclear magnetic resonance spectroscopy (¹H-NMR). In the solid state, differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), scanning electron microscopy (SEM) and RX diffraction studies were used. Solubility studies suggested the existence of inclusion complex between SULC and β-CD or HP-β-CD. ¹H-NMR spectroscopy studies showed that the complex formed occurs by complexation of imidazole ring into inner cavity. DSC studies showed the existence of a complex of SULC with β-CD. The TGA and RX studies confirmed the DSC results of the complex. Solubility of SULC in solid complexes was studied by the dissolution method and it was found to be much more soluble than the uncomplexed drug.     

Surface area and pore structure properties of urethane-based copolymers containing β-cyclodextrin

The surface area and pore structure characteristics were investigated for a series of aliphatic- and aromatic-based polyurethane (PU) copolymers containing a macromolecular porogen (β-cyclodextrin). The bi-functional diisocyanates used as crosslinker units were: 1,6-hexamethylene, 4,4'-dicyclohexylmethane, 4,4'-diphenylmethane, 1,4-phenylene, and 1,5-naphthalene diisocyanate, respectively. The macromolecular porogen content was controlled by fixing the composition of β-CD and varying the co-monomer mole ratio from unity to larger integer values. Nitrogen adsorption results reveal that copolymer materials with variable mole ratios (β-CD: crosslinker) from 1:1 to 1:3 displayed relatively low BET surface areas (SA～10(1) m(2)/g) and mesopore diameters (～16-29 nm). In contrast, a dye adsorption method in aqueous solution with p-nitrophenol (PNP) at pH=4.60 and 295 K provided estimates of the surface area (1.5-6.2×10(2) m(2)/g) for the corresponding copolymer materials. Variation of the copolymer SA was attributed to the type of diisocyanate crosslinker and its relative mole ratio. The differences in the estimated SA values from porosimetry and the UV-Vis dye adsorption method for these nanoporous copolymers were attributed to the role of solvent as evidenced by swelling of the copolymer framework in aqueous solution and the respective temperature conditions.     

Novel adamantane-bearing anilines and properties of their supramolecular complexes with β-cyclodextrin

Several novel anilines bearing 1-adamantyl substituents that are useful for drug modification were synthesised from the corresponding 1-adamantyl (nitrophenyl) ketones. The host–guest systems of these prepared ligands with β-cyclodextrin (β-CD) were studied using electrospray ionisation mass spectrometry, NMR spectroscopy, titration calorimetry and semi-empirical calculations. The complexes with 1:1 stoichiometry were found to predominantly exist as pseudorotaxane-like threaded structures with the adamantane cage sitting deep in the cavity of β-CD close to the wider rim. Such geometry was observed for all examined amines and is independent of their structure and/or presence of protic substituents.     

Evaluation of mechanical properties and characterization of silicon carbide–reinforced polyamide 6 polymer composites and their engineering applications

In this article, the tensile strength, impact, and hardness properties of silicon carbide (SiC) reinforced with polyamide 6 (PA6) are described for the first time. The composites were fabricated by an injection molding method using the SiC with varying weight percentages. The tensile and hardness of SiC/PA6 composites showed a regular trend of increasing tensile strength, impact, and hardness properties with varying weight percentages until 10 wt% and impact strength of SiC/PA6 composites increased up to 5 wt% afterwards decreasing the mechanical properties of the composite with greater weight percentages. Scanning electron microscope (SEM) studies were carried out to evaluate the SiC/PA6 interactions. The results related to SiC/PA6 composites were compared with those obtained for pure PA6.     

Spectrofluorimetric study and determination of desipramine in the presence of β-cyclodextrin

The native fluorescence intensity of desipramine was enhanced in the presence of β-cyclodextrin in aqueous solution. The inclusion complex formation between these compounds was studied by spectrofluorimetry. A stable complex with a 2: 1 stoichiometry of β-cyclodextrin to desipramine was formed (logβ₂ = 9.29 ± 0.01). In the presence of an optimum concentration of β-cyclodextrin, the fluorescence intensity was linearly proportional to desipramine concentration in the range of 0.1–100 μg/mL (7.2 × 10^?7?1.0 × 10^?4 M) with a limit of detection of 7 × 10^?8 M. The method was successfully applied to the detection of desipramine in its tablets.     

Synthesis of a novel β-cyclodextrin derivative with high solubility and the electrochemical properties of ferrocene-carbonyl-β-cyclodextrin inclusion complex as an electron transfer mediator

A facile strategy for preparing water-soluble β-cyclodextrin derivative, carbonyl-β-cyclodextrin, was developed by partial oxidation of β-cyclodextrin. The solubility of carbonyl-β-cyclodextrin was greatly enhanced due to the breaking of intramolecular hydrogen bond network of β-cyclodextrin. Ferrocene was included into the cavity of carbonyl-β-cyclodextrin to form Fc-carbonyl-β-cyclodextrin inclusion complex. The electrochemical properties of Fc-carbonyl-β-cyclodextrin were studied. The Fc-carbonyl-β-cyclodextrin complex exhibited high solubility and was shown to be good electrochemical probe and efficient mediator for bioelectrocatalysis of glucose oxidase. The bioelectrocatalytic efficacy of Fc-carbonyl-β-cyclodextrin complex opened up homogeneous applications of ferrocene in amperometric biosensor systems.     

Turn-on fluorescent detection of captopril in urine samples based on hydrophilic hydroxypropyl β-cyclodextrin polymer

Analytical and Bioanalytical Chemistry - Here, one kind of hydrophilic hydroxypropyl β-cyclodextrin cross-linked polymer (HP-CDP) was prepared and used to establish a “turn-on”...     

Solubilization of cholesterol in aqueous solution by two β-cyclodextrin dimers and a negatively charged β-cyclodextrin derivative

Two βCD dimers (linked by succinic acid, 2, or ethylenediaminetetraacetic acid, EDTA, 3, bridges) and a negatively charged monomer derivative of βCD, 1, have been synthesized and their ability to solubilize cholesterol in aqueous solution was studied. The three compounds exhibit a great capacity in solubilizing cholesterol as, for instance, concentrations up to 6 mM of cholesterol were measured in the presence of 25 mM of 3. The phase-solubility diagrams of the two dimers exhibit A _L type profiles while the monomer 1 follows an A _P isotherm. The cholesterol/dimer complexes have 1:1 stoicheiometries while monomer 1 forms two complexes with molar ratios of 1:1 and 1:2 (cholesterol/1). The equilibrium constants are K _1:1 = (5.9 ± 0.3) × 10⁴ M^?1 and K _1:1 = (8.8 ± 0.2) × 10⁴ M^?1 for 2 and 3, respectively, and K _1:1 = 73 ± 19 M^?1 and K _1:2 = 204 ± 65 M^?1 for 1. The comparison of K _1:1(3) with the product K _1:1 × K _1:2 (1) reveals that a chelate effect in binding the cholesterol by 3 exists. The structure of the cholesterol/3 complex was studied by ROESY experiments and by molecular dynamics simulations.     

The physical properties and unusual pyrolysis behaviour of a supramolecular complex of β-cyclodextrin and potassium ferrioxalate

The thermal pyrolysis behaviour of a complex of β-cyclodextrin (CD) and potassium ferrioxalate (PF) was analyzed using gas chromatography coupled to time-of-flight mass spectrometry. Two rare inorganic ions: CO(2)(2+) and O(4)(+), neither of which was found in the cases of free β-CD and PF, were synchronously observed during the decomposition of the complex. Our observations led to proposed formation mechanisms of the ions, in which the structural transformation of a metastable intermediate ion (C(2)H(4)O(3)(+)) was employed to qualitatively explain our data. Besides this, the formation, structure and magnetic properties of the complex were evaluated carefully. First, XPS analysis indicates a decrease of electron densities of Fe(III) ions in the presence of β-CD. We think that this is due to an effect of the noncovalent complexation between PF and β-CD. This gives an indication on the effect of second sphere coordination of β-CD on the electronic structure of the Fe(III) in the first coordination sphere. Second, structural changes in stacking modes and morphologies provide further support for the noncovalent complexation. For example, the surface feature of the complex gives us an impression that both β-CD and PF are evenly dispersed with each other. Also, the complex presents a uniform sponge-like porous nanostructure with diameters of less than 50 nm. This seems to be an important reason for those changes that occurred in the thermal analysis. Finally, the result of magnetic experiments implies that the coordination compound PF upon complexation with β-CD will experience a gradual decrease in magnetization with the increase of magnetic fields. These observations have significant implications for a better understanding of the importance of the construction and deconstruction of a second sphere coordination in modifying the physical properties of an σ-coordination compound.