Nanofibers of silk fibroin controlled by the crystallization of polyethylene glycol in frozen solution

The conformation of silk fibroin(SF) frozen with polyethylene glycol(PEG) at a molecular weight from 2kDa to 20kDa and a mass ratio of PEG:SF from 1:5 to 10:1 was studied by spectral and microscopic methods. It is found that the conformation transition of SF from random coil to b-sheet could be induced by the stress resulting from PEG crystallization at-20 °C, and greatly depended on the cooling rate, PEG:SF mass ratio and PEG molecular weight. These findings provide a new method for the preparation of desired SF nanofibers.     

Denitrogenation of acrylonitrile-butadiene-styrene copolymers using polyethylene glycol/hydroxides

Alkaline hydrolysis of acrylonitrile-butadiene-styrene (ABS) copolymers has been systematically investigated to demonstrate the use of reaction systems based on polyethylene glycol (PEG)/hydroxides for N-elimination from ABS. The structure of denitrogenated ABS has been characterized using elemental analysis, FTIR, ¹H-NMR, and solid state ¹³C CP-MAS NMR, indicating sequential hydrolysis as a plausible mechanism of elimination of N from ABS. The effects of reaction conditions such as solvent selection, reaction temperature, alkaline species and concentration, as well as PEG molecular weight were evaluated. At optimal conditions (THF, PEG600, 4.3 wt % of NaOH), as much as 93.1% of the original nitrogen content of ABS was removed in 2 h at 160 °C, while it is only 35.6% without PEG. This clearly demonstrates the high-efficiency of a PEG/hydroxides catalytic system for denitrogenation of ABS, stressing the potential of this method for denitrogenation of other N-containing polymers.     

Dynamic properties of the polyethylene glycol molecules on the oscillating solid–liquid interface

The dynamic properties of polyethylene glycol (PEG) molecules on the solid–liquid interface oscillating at MHz were investigated using the quartz crystal microbalance (QCM). The number-average molecular weights (M_n) of the PEG molecules were systematically varied over 4 orders of magnitude. This study makes it clear that the series-resonant frequency shift, ΔF, of the QCM against the square root of the density–viscosity product of the PEG solution is linear and has the intercept. Moreover, systematical analysis reveals that the ΔF slope rapidly decreases with M_n and that the ΔF intercept becomes constant above 4.0 × 10³ g mol⁻¹. As a result, those reveal that the resonant length of the PEG molecule moving with the oscillating plate of 9 MHz is 54.2 Å. We also find that the behaviors of ΔF due to M_n are mainly caused by the length of the PEG molecule.     

Size exclusion chromatography with Corona charged aerosol detector for the analysis of polyethylene glycol polymer

A technique of using size exclusion chromatography (SEC) with the Corona charged aerosol detector (CAD) was developed and evaluated in comparison with refractive index (RI) and evaporative light scattering detection (ELSD) for fast screening of polyethylene glycol (PEG), a polymer used in preparing pegylated pharmaceutical compounds. These detection techniques were used in the analysis of multiple lots of PEG reagents. CAD was found to provide more accurate impurity and polydispersity profiles of PEG reagents that better differentiate their quality, while RI was not suitable for this application due to its low sensitivity and ELSD led to underestimation of the impurity and polydispersity. The accuracy of polydispersity determination by SEC-CAD was validated against a commercial reference standard of known polydispersity. The SEC-CAD technique and the observed differences between the three detectors can also be applied to polymer analysis in general.     

Production and characterization of poly(3-hydroxybutyrateco-3-hydroxyhexanoate)-poly(ethylene glycol) hybird copolymer with adjustable molecular weight

A novel natural-synthetic hybrid block copolymer was synthesized by Aeromonas hydrophila 4AK4 in poly(ethylene glycol)(PEG,M_n=200) modified fermentation.This hybrid biomaterial consists of the natural hydrophobic polymer poly(3-hydroxybutyrat-co-3-hydroxyhexanoate)(PHBHHx) end-capped with hydrophilic PEG,which has the increased flexibility as well as the improved thermal stability.Addition of diethylene glycol(DEG) and ethylene glycol could not result in the accumulation of hybrid block copolymer.DEG and ethylene glycol,together with PEG-200,could cause a reduction of molar mass of PHBHHx,resulting in a series of low molecular weight polymer and the reduction of the polymer yield as well as the cellular productivity.In vitro degradation of PHBHHx and PHBHHx-PEG with different molecular weight showed that the decrease of molecular weight accelerated the degradation of copolymers,but PEG modification has little effect on its degradation rate.The results in this study provided a convenient and direct method to produce a series of PHBHHx and PHBHHx-PEG materials with adjustable molecular weight and broad molecular weight distribution which will be very useful for the biomedical applications.     

Diffusion rate of polyethylene glycol into cell walls of red pine following vacuum impregnation

Rates of penetration of polyethylene glycol (PEG) molecular weight (MW) 1,000, 2,000, and 4,000 from 30% aqueous solutions into hydrated cell walls of red pine samples following vacuum impregnation were estimated by examining retained swelling of the samples after different post-treatment conditioning times. To model PEG diffusion into wood cell walls, a hollow cylinder diffusion model was developed and diffusion coefficients were estimated and compared to those determined with a plane membrane diffusion model. The models gave similar results. The diffusion coefficient of PEG MW 1,000 at room temperature was estimated to be in the order of 10⁻¹³ m²/s, while the penetration rates of both PEG 2,000 and 4,000 were about an order lower. These findings indicate that treatments of wood by PEG can be significantly shorter than present practices of soaking green samples in solution if the samples are vacuum/pressure impregnated with PEG solution.     

Fluorinated derivatives of a polyaspartamide bearing polyethylene glycol chains as oxygen carriers

In this paper the synthesis and characterization of new fluorinated polymers based on a polyaspartamide bearing polyethylene glycol (PEG) chains, are reported. The starting material was the α,β-poly(N-2-hydroxyethyl)-dl-aspartamide (PHEA), a water soluble and biocompatible polymer, that has been derivatized with both polyethylene glycol (with a molecular weight of 2000 Da) and 5-pentafluorophenyl-3-perfluoroheptyl-1,2,4-oxadiazole. By varying the amount of the fluorinated oxadiazole, three samples have been prepared and characterized by FT-IR, ¹H NMR, ¹⁹F NMR and UV-VIS spectroscopy. Size exclusion chromatography analysis of these copolymers revealed the occurrence of a self-association process in aqueous medium. The value of critical aggregation concentration has been evaluated by performing a tensiometric study, whereas the size of these aggregates has been determined by photon correlation spectroscopy. Oxygen solubility studies in aqueous solutions of these fluoropolymers showed their ability to maintain high oxygen levels in solution. The biocompatibility of these fluoropolymers has been evaluated by performing an in vitro viability assay on human chronic myelogenous leukaemia cells (K-562), chosen as a model cell line, and haemolysis experiments on human red blood cells. All these properties suggest the potential use of these fluoropolymers as artificial oxygen carriers.     

The solubility of water in mixtures of dimethyl ether and carbon dioxide

This paper reports measurements of the solubility of water in liquid and supercritical fluid mixtures of dimethyl ether and carbon dioxide. The measurements were made by extracting water under saturation conditions using premixed liquid dimethyl ether–carbon dioxide mixtures. Results are reported for temperatures of 313.8 K and 333.3 K at 9.0 MPa and 15.0 MPa. Results are fitted to the Peng–Robinson cubic equation of state with mixing rules according to Wong and Sandler, using binary interaction parameters fitted to the literature data for the respective binary systems: dimethyl ether–water; dimethyl ether–carbon dioxide; and carbon dioxide–water. Liquid densities for dimethyl ether–carbon dioxide mixtures, measured using a coriolis flow instrument, are also reported.     

Synthesis and characterization of amphiphilic diblock copolymers of methyl tri(ethylene glycol) vinyl ether and isobutyl vinyl ether

Water-soluble diblock copolymers of methyl tri(ethylene glycol) vinyl ether (hydrophilic block) and isobutyl vinyl ether (hydrophobic block) of different molecular weights and composition were synthesized by living cationic polymerization. The molecular weight and comonomer composition of these copolymers were determined by GPC and ¹H NMR spectroscopy, respectively. Aqueous solutions of the copolymers were characterized in terms of their micellar behavior using dynamic light scattering, aqueous GPC, and dye solubilization. All the copolymers formed aggregates with the exception of a diblock copolymer with only two hydrophobic monomer units. The micellar hydrodynamic size scaled with the 0.61 power of the number of hydrophobic units, in good agreement with a theoretical exponent of 0.73. An increase in the length of the hydrophobic block at constant hydrophilic block length or an increase in the overall polymer size at constant block length ratio both resulted in lower critical micelle concentrations (cmcs). The cloud points of 1% w/w aqueous solutions of the polymers were determined by turbidimetry. An increase in the length of the hydrophobic block at constant hydrophilic block length caused a decrease in the cloud points of the copolymers. However, an increase in the overall polymer size at constant block length ratio led to an increase in the cloud point. © 1996 John Wiley & Sons, Inc.     

Molecular mobility and crystallinity in polytetramethylene ether glycol in the bulk and as soft component in polyurethanes

We revisit molecular mobility and crystallinity in a series of Polyurethanes prepared with polytetramethylene ether glycol (PTMEG) with varying molecular weights as soft component, methylene diisocyanate (MDI) as diisocyanate component and butanediol as chain extender in close comparison to the properties of the respective macrodiols used as soft segments. Modulated differential scanning calorimetry (MDSC) was utilized to study the glass transition and in detail crystallization and melting. Thermally stimulated depolarization currents (TSDC), and dielectric relaxation spectroscopy (DRS) were used to investigate local dynamics, dynamic glass transition and indirectly, crystallinity and morphology. The dielectric data were evaluated through representation by contour plots in the Arrhenius plane. Glass transition temperature of the diols is practically unaffected by molecular weight due to H-bonding effect, while for the PUs it showed a decreasing dependence due to higher microphase separation. Results are also discussed in terms of fragility. Crystallization of PTMEG becomes more intense and stable with increasing molecular weight, while the reflection of its melting process on its dielectric response was also observed. A weak crystallization process in the Polyurethane with long soft segments was well resolved using MDSC. Evidence for the occurrence of spinodal decomposition before this crystallization was observed by means of DRS.     

Radical copolymerization of 2-vinyl pyridine and oligo(ethylene glycol) methyl ether methacrylates: Monomer reactivity ratios and thermal properties

Statistical copolymers of 2-vinylpyridine (VP) with oligo(ethylene glycol) methyl ether methacrylates of two different molecular weights (300 g/mol (OEGMA₃₀₀) and 1100 g/mol (OEGMA₁₁₀₀)), were prepared by free radical polymerization. The reactivity ratios of these two sets of monomers were estimated using the Finemann–Ross, the inverted Finemann–Ross and the Kelen–Tüdos graphical methods. Structural parameters of the copolymers were obtained by calculating the dyad monomer sequence fractions and the mean sequence length. The effect of the length of the oligo(ethylene glycol) group on the copolymer structure is discussed. The glass-transition temperature (T_g) values of the VP copolymers with OEGMA₃₀₀ were measured and examined in the frame of several theoretical equations, allowing the prediction of these T_g values. The copolymers of VP with OEGMA₁₁₀₀ exhibited the characteristic melting endotherm, due to the crystallinity of the methacrylate sequences and glass transition temperatures attributed to the PVP sequences.     

Simply and effectively preparing high-purity phosvitin using polyethylene glycol and anion-exchange chromatography

An attempt was made to develop a new protocol for preparing phosvitin that could be easy scaled up using polyethylene glycol (PEG6000). Influence of PEG6000 concentration and pH of sample solution on phosvitin isolation was investigated. Phosvitin of high purity (99%) was obtained in good yield (47%) with the optimal condition of pH 4.0 and 3% PEG6000 precipitation. In addition, through evaluating different anion-exchange chromatography methods, the DEAE procedure at pH 7.5 was finally selected as the best procedure to obtain metal-free phosvitin that lost the least protein. Furthermore, it is observed that the purity and characterizations of prepared phosvitin were similar to those of the standard phosvitin from Sigma, and the random coil of phosvitin converted into more compact structure after removing metal ion. In conclusion, the developed method was simple and suitable for scaled up preparation of phosvitin.     

Properties of polyethylene glycol supported tetraarylporphyrin in aqueous solution and its interaction with liposomal membranes

5,10,15,20-Tetrakis(4-hydroxyphenyl)porphyrin was functionalized by covalent attachment of poly(ethylene glycol) (PEG) chains of various molecular weights, 350, 2000, and 5000 Da. The properties of PEG-functionalized tetraarylporphyrins in aqueous solution and their interactions with liposomes have been studied. Electronic absorption spectroscopy, dynamic light scattering, atomic force microscopy, and fluorescence quenching were used to monitor aggregation of porphyrin chromophores and behavior of the attached PEG chains in the aqueous solution. The tendency for aggregation of porphyrin chromophores in aqueous solution and the efficiency of fluorescence quenching by KI decrease with increasing length of PEG chain linked to the porphyrin ring. The experimental results indicate that polymer clusters are present in aqueous solution of all pegylated porphyrins. The interactions between the pegylated porphyrins and phosphatidylcholine liposomes in the aqueous solution were studied using the fluorescence methods. The apparent binding constants of porphyrin chromophores to liposomes were determined. The degree of binding was found to be dependent on the molecular weight of the attached polymer.     

Crystallization of photo-chain extended poly(ethylene glycol)

Coumarin-functionalized poly(ethylene glycol) (PEG) monols and diols were isothermally crystallized at temperatures between 20 and 35 °C before and after exposure to approximately 110 J cm⁻² of ultra-violet A (λ > 300 nm, UVA) irradiation. Irradiation dimerized the coumarin groups and chain-extended the coumarin-functionalized PEG oligomers. The higher molecular weights reduced the crystal growth rate by as much as 50% compared to the non-irradiated coumarin-functionalized PEG oligomers under ambient crystallization conditions. Hoffman’s kinetic nucleation theory was utilized to evaluate the types of nucleation that occurred for the coumarin-functionalized PEG diols (COU-PEG-COU). Crystallization regimes II and III were observed for the coumarin-modified PEG oligomers before and after exposure to UVA light.     

Liquid + liquid equilibria for the quaternary systems of (water + acetic acid + mixed solvent) at 298.2 K and atmospheric pressure

Liquid–liquid equilibrium (LLE) data for the quaternary systems of [water + acetic acid + mixed solvent (dipropyl ether + diisopropyl ether)] were measured at 298.2 K and atmospheric pressure, using various compositions of mixed solvent. Binodal curves and tie-lines for the quaternary systems have been determined in order to investigate the effect of solvent mixture, dipropyl ether (DPE) and diisopropyl ether (IPE), on extracting acetic acid from aqueous solution. A comparison of the extracting capabilities of the mixed solvents was made with respect to distribution coefficients, separation factors, and solvent free selectivity bases. Reliability of the data was confirmed by using the Othmer–Tobias and Hand plots. The tie-lines were also correlated using the UNIFAC model. The average root-mean-square deviations between the observed and calculated mass fractions for the studied systems were in the range of 10–14%.     

Formation of nanoporous poly(aryl amide ether) (PAAE) films by selective removal of poly(ethylene glycol) (PEG) from PEG/PAAE composite films

Poly(aryl amide ether) (PAAE) thin films with nanometer-sized pores have been prepared in two steps: (1) solution casting of partially miscible poly(ethylene glycol) (PEG)/PAAE blends from one of their common solvents, dimethyl sulfoxide (DMSO), results in formation of PEG/PAAE nanocomposite films; (2) selective removal of PEG component by water washing yields nanosized, porous PAAE films. The pores have been found to have a small size variation and cover the whole surface homogeneously. With an increase in PEG contents, the sizes of the pores increase but the size distributions do not have much changes. This has been ascribed to formation of small PEG domains in PEG/PAAE composite films, which is facilitated by the strong interactions, mostly hydrogen bonds, between PEG and PAAE macromolecular chains.     

Polyethersulfone/polyacrylonitrile blend ultrafiltration membranes with different molecular weight of polyethylene glycol: preparation,morphology and antifouling properties

Asymmetric ultrafiltration (UF) membranes were prepared from blends of polyethersulfone (PES)/polyacrylonitrile (PAN) via phase inversion method induced by immersion precipitation. Polyethylene glycol (PEG) with four different molecular weights was used as pore former and hydrophilic polymeric additive. N,N‐dimethylformamide (DMF) and water were used as solvent and coagulant (nonsolvent), respectively. The effects of different proportion of PES/PAN and molecular weight of PEG on morphology and performance of the prepared membranes were investigated. Performance of the membranes was evaluated using UF experiments of pure water and buffered bovine serum albumin (BSA) solution as feed. The contact angle measurements indicated that the hydrophilicities of PES/PAN membrane increase by increasing the PAN concentration in the casting solution. However, performance of the membranes improves by increasing the PAN concentration in the casting solution up to 20% and then decreases with further addition of PAN. It was found out that the rejection of BSA decreases with increasing the PAN concentration in the casting solution. Furthermore, it was found that the performance of the membranes increases by increasing the molecular weight of PEG up to 1500 Da and then decreases with the higher molecular weights. The morphology of the prepared membranes was studied by scanning electron microscopy. Copyright © 2011 John Wiley & Sons, Ltd.     

Calibration of an evaporative light-scattering detector as a mass detector for supercritical fluid chromatography by using uniform Poly(ethylene glycol) oligomers

The quantitativeness of an evaporative light-scattering detector (ELSD) for supercritical fluid chromatography (SFC) was evaluated by using an equimass mixture of uniform poly(ethylene glycol) (PEG) oligomers. Uniform oligomers, in which all molecules have an identical molecular mass, are useful for the accurate calibration of detectors. We calibrated the SFC-ELSD system for various concentrations and molecular masses by using an equimass mixture of PEG oligomers. ELSD not only showed a good linear response to the injected concentration over a wide concentration range, from 10(-4) to 10(-1)g/mL, but also showed a strong dependence on the molecular mass of the solute. By using chromatograms of the equimass mixture of uniform oligomers to calibrate SFC-ELSD, it was possible to determine exact values of not only the average mass but also the molecular-mass distribution for a PEG 1540 sample. The average molecular mass was shifted to a higher value by several percentage points after calibration of the ELSD.     

Densities and relative permittivities of binary mixtures containing dipropylene glycol monomethyl ether

Relative permittivities () and densities () of numerous binary mixtures of dipropylene glycol monomethyl ether (1)+propylene glycol mono n-butyl ether (2) and dipropylene glycol monomethyl ether (1)+dipropylene glycol mono n-butyl ether (2) at five temperatures, between (293.15 and 313.15) K, are reported. The excess molar volumes (V ^E) and the relative permittivity deviations () were calculated from these experimental data. The results are discussed in terms of intermolecular interactions in the bulk of studied the binary mixtures.     

Size exclusion chromatographic determination of hydroxypropyl methyl cellulose and polyethylene glycol 400 in an ophthalmic solution

Summary Hydroxypropyl methyl cellulose (HPMC) and polyethylene glycol 400 (PEG 400) content in HypoTears™ Daily Dose ophthalmic solution are determined simultaneously by size exclusion chromatography. The retention times of HPMC and PEG 400 are 10.6 and 15.4 minutes, respectively. The method requires minimal sample pretreatment and is accurate and reproducible. The peak area response from a refractive index detector versus HPMC and PEG 400 concentration is linear over the range of 50–150 % of their label claims of 2.5 mg/mL and 10 mg/mL, respectively. The mean absolute recoveries of HPMC and PEG 400 at their label claim using the described method are 98.9±1.3 % and 100.4±1.2 % (mean±SD, n=12), respectively.