Molecularly imprinted poly (methacrylamide-co-methacrylic acid) composite membranes for recognition of curcumin

In this study, molecularly imprinted poly (methacrylamide-co-methacrylic acid) composite membranes with different ratio of methacrylamide (MAM) versus methacrylic acid (MAA) were prepared via UV initiated photo-copolymerization on the commercial filter paper. Curcumin was chosen as the template molecule. Infra-red (IR) spectroscopy was used to study the binding mechanism between the imprinted sites and the templates. The morphology of the resultant membranes was visualized by scanning electron microscopy (SEM). Static equilibrium binding and recognition properties of the imprinted composite membranes to curcumin (cur-I) and its analogues demethoxycurcumin (cur-II) or bisdemethoxycurcumin (cur-III) were tested. The results showed that curcumin-imprinted membranes had the best recognition ability to curcumin compared to its analogues. From the results, the biggest selectivity factor of α_cur-I/cur-II and α_{cur-I/cur-III} were 1.50 and 5.94, and they were obtained from the composite membranes in which MAM/MAA were 1:4 and 0:1, respectively. The results of this study implied that the molecularly imprinted composite membranes could be used as separation membranes for curcumin enrichment.     

Selective separation of magnolol using molecularly imprinted membranes

Molecularly imprinted membranes (MIMs) for selective separation of magnolol were prepared by thermal polymerization using magnolol as the template, ethylene glycol dimethacrylate (EGDMA) as the cross‐linker, 2,2‐azobisisobutyronitrile (AIBN) as the initiator, organic solvent as the porogen, methacrylamide (MAM) and acrylic acid (AA) as the functional monomers and cellulose acetate as the agglutinant. Commercial filter paper was used as the supporting material. The effects of different porogens and the ratio of functional monomers on the binding and recognition capacity of MIMs were investigated, and the morphology of the membranes was examined by scanning electron microscopy (SEM). The results showed that the MIMs have the highest selectivity to magnolol when the ratio of MAM/AA was 1:4 and tetrahydrofuran (THF) with dimethyl sulfoxide (DMSO) was used as the porogen. The morphology of the imprinted membranes after template extracting is much rougher with big cavities than that of the non‐imprinted membranes (NIMs) and the imprinted membranes before template extracting. The MIMs can selectively separate the magnolol.     

白藜芦醇分子印迹复合膜的制备及其选择性能

以反式白藜芦醇为模板分子,聚偏氟乙烯微孔滤膜为支撑膜,丙烯酰胺为功能单体,乙二醇二甲基丙烯酸脂(EDMA)为交联剂,采用热引发原位聚合方法制备了白藜芦醇分子印迹聚合物膜。研究了分子印迹膜对白藜芦醇及其结构类似物(2-萘酚、白藜芦醇甙和双酚A)的结合和透过性,并用扫描电镜对膜形貌进行了表征。结果表明,印迹复合膜对模板分子白藜芦醇具有良好的吸附选择性,印迹膜对白藜芦醇的吸附量远远大于其它结构类似物,其饱和吸附量达1.72μmol/g,为非印迹膜的3倍;尺寸效应和印迹效应是影响物质在印迹膜上的透过量的两个重要因素,尺寸比模板分子小的2-萘酚最先透过,而相对于尺寸接近或大于模板分子的双酚A或白藜芦醇甙,模板分子优先透过。而且,模板分子在印迹膜上的透过量大于非印迹膜。     

铅(Ⅱ)离子印迹复合膜的制备及其性能研究

以聚丙烯微孔膜(MPPM)为支撑,采用共价表面修饰和离子印迹技术,制备了Pb(Ⅱ)离子印迹复合膜.首先通过紫外光引发丙烯酸接枝聚合,在MPPM表面引入羧基;然后基于羧基和氨基的反应,将壳聚糖共价接枝到MPPM表面;再以Pb(Ⅱ)为模板离子、环氧氯丙烷为交联剂,通过配位键作用形成离子印迹位点.制备过程通过ATR-FTIR和XPS分析得到了证实.利用扫描电子显微镜(SEM)-能量色散X射线光谱仪(EDX)对膜表面及截面的形貌及元素分布进行了分析.静态水接触角和纯水通量实验结果显示,印迹复合膜具有良好的表面亲水性和渗透性,在离子印迹聚合物接枝率为174.4μg/cm2时,水通量高达2659±58 L/(m2.h).印迹复合膜对Pb(Ⅱ)离子的吸附亲和性和渗透选择性分别通过平衡结合实验和竞争渗透实验进行评价.与非印迹复合膜相比,印迹复合膜对Pb(Ⅱ)离子展现出更强的吸附亲和性,更快的吸附速率及更好的渗透选择性,以Cu(Ⅱ)和Zn(Ⅱ)作为竞争离子,其渗透选择性因子分别为3.43和3.93.     

香豆素-3-羧酸分子印迹聚合物复合膜对底物的结合及渗透选择性质的研究

在光照和引发剂的作用下, 模板分子香豆素-3-羧酸、 功能单体丙烯酰胺和交联剂乙二醇二甲基丙烯酸酯(EDMA)或三甲氧基丙烷三甲基丙烯酸(TRIM)在聚偏氟乙烯(PVDF)微孔滤膜表面聚合形成分子印迹聚合物复合膜. 用高效液相色谱仪测定了分别以TRIM和EDMA为交联剂制备的分子印迹聚合物膜在不同溶剂中对混合底物的结合和渗透选择性. 结果表明, 以TRIM为交联剂的印迹膜对模板分子具有更高的结合和渗透选择性. 另外, 以乙腈或乙腈/水作为溶剂对分子印迹膜所作的实验和讨论有助于为从复杂样品中分离模板分子奠定理论和实验基础.     

Molecularly imprinted polymer membranes for substance-selective solid-phase extraction from water by surface photo-grafting polymerization

Hydrophilized polyvinylidene fluoride microfiltration membranes were surface-modified in the presence of a template (terbumeton) in methanol with a graft copolymer of a functional monomer (2-acrylamido-2-methyl-1-propane sulfonic acid, AMPS, methacrylic acid, MAA, or acrylic acid, AA) and a cross-linker (N,N'-methylene-bis-acrylamide) using UV irradiation and benzophenone as photoinitiator. As result, membranes covered with a thin layer of imprinted polymer selective to terbumeton were obtained. Blank membranes were prepared with the same monomer composition, but in the absence of the template. The membranes' capacity to adsorb terbumetone from aqueous solution was evaluated yielding information regarding the effect of polymer synthesis (type and concentration of functional monomer, concentration of cross-linker) on the resulting membranes' recognition properties. UV spectroscopic studies of the interactions with terbumetone revealed that AMPS forms a stronger complex than MAA and AA. In agreement with that finding, imprinting with AMPS gave higher affinities than with MAA and AA. The terbumeton-imprinted membranes showed significantly higher sorption capability to this herbicide than to similar compounds (atrazine, desmetryn, metribuzine). With the novel surface modification technology, the low non-specific binding properties of the hydrophilized microfiltration membrane could successfully be combined with the receptor properties of molecular imprints, yielding substance-specific molecularly imprinted polymer composite membranes. The high affinity of these synthetic affinity membranes to triazine herbicides together with their straightforward and inexpensive preparation provides a good basis for the development of applications of imprinted polymers in separation processes such as solid-phase extraction.     

Grafting of MIPs from PVDF Membranes via Reversible Addition-fragmentation Chain Transfer Polymerization for Selective Removal of p-Hydroxybenzoic Acid

Effective molecularly imprinted membranes(MIMs) were developed as an efficient adsorbent for the selective removal of p-hydroxybenzoic acid(p-HB) from acetylsalicylic acid(ASA, aspirin). The MIMs were grafted successfully from poly(vinylidene fluoride) microfiltration membranes via reversible addition-fragmentation chain transfer(RAFT) polymerization. The graft copolymerization of acrylic acid(AA) in the presence of template p-hydroxybenzoic acid led to molecularly imprinted polymer(MIP) film coated membranes. The obtained MIMs were characterized by scanning electron microscopy(SEM), Fourier transform infrared spectrophotometer(FTIR) and Raman spectra, and batch mode adsorption studies were carried out to investigate the specific adsorption equilibrium, kinetics and selective recognition properties of different MIMs. The kinetic properties of the MIMs could be well described by the pseudo-second-order rate equation. Selective permeation experiments were performed to evaluate the permeation selectivity of the p-HB imprinted membranes. The observed performances of the MIMs are applicable to the further purification of aspirin.     

Theoretical research on self-assembly system of molecularly imprinted polymers formed by melamine and trifluoromethacrylic acid

The long-range correction method (WB97XD) was applied to simulate the self-assembly system of the molecularly imprinted polymers via Gaussian 09 software. Melamine (MAM) was taken as the template molecule and trifluoromethacrylic acid (TFMAA) was taken as the functional monomer. The ethylene glycol dimethacrylate, divinylbenzene, pentaerythritol triacrylate, and trimethylolpropane trimethylacrylate were chosen as the cross-linking agents, respectively. The acetonitrile, methanol, dichloromethane, chloroform, toluene, ethanol, and dimethylsulfoxide were taken as solvents, respectively. The bonding situation, the geometry optimization of the different imprinting ratios, the binding energy, the molecular imprinting mechanism between MAM and TFMAA, and the influence of cross-linking agent as well as solvent have been studied. The detailed topological property was also applied to discuss the nature of the imprinting effect. The results indicate that MAM and TFMAA can form ordered compounds via hydrogen bond interaction. The melamine-molecularly imprinted polymers with a molar ratio of 1:6 have the lowest binding energy, the largest amount of hydrogen bonds, and the stable structure in toluene solvent. Divinylbenzene is the best cross-linking agent for the melamine-molecularly imprinted polymers in comparison with others. The study can provide a theoretical reference for the synthesis of the high selectivity melamine-molecularly imprinted polymers.     

烟酸分子印迹复合膜的制备及其分离性能研究

以聚偏氟乙烯微孔滤膜为支撑膜,烟酸为模板分子,用紫外光引发表面修饰聚合制备了微孔滤膜支撑-烟酸分子印迹复合膜.电镜扫描对该印迹复合膜进行了表面形态表征.Scatchard分析表明,在所研究的浓度范围内分子印迹复合膜中存在等价的结合位点,结合位点的平衡离解常数Kd为5.55×10-2mmol·L-1.底物的结合和渗透选择性实验表明,分子印迹复合膜对烟酸有较好的结合性能,结合量是6.10μmol·g-1.与其结构类似的化合物烟酰胺相比,分子印迹复合膜对模板分子展示了更好的选择性及高度的识别能力.     

Preliminary evaluation of sulfonated poly(ether ether ketone)/monoethanolamine/adipic acid composite membranes for direct methanol fuel cell applications

A series of sulfonated poly(ether ether ketone)/monoethanolamine/adipic acid (SPEEK/MEA/AA) composite membranes are prepared and investigated to assess their possibility as proton exchange membranes in direct methanol fuel cells (DMFCs). A preliminary evaluation shows that introducing MEA and AA into SPEEK matrix decreases the thermal stability of membrane. However, the degradation temperatures are still above 260 °C, satisfying the requirement for fuel cell operation. Compared with the pure SPEEK membrane, the composite membranes exhibit not only lower water uptake and swelling ratios but also better mechanical property and oxidative stability. Noticeably, the methanol diffusion coefficient of the composite membranes decrease significantly from 3.15 × 10^?6 to 0.76 × 10^?6 cm²/s with increasing MEA and AA content, accompanied by only a small sacrifice in proton conductivity. Although both the methanol diffusion coefficient and the proton conductivity of composite membranes are lower than those of pure SPEEK and Nafion® 117 membranes, their selectivity (conductivity/methanol diffusion coefficient) are higher. In addition, the composite membranes show excellent stability in aqueous methanol solution. The good thermal and chemical stability, low swelling ratio, excellent mechanical property, low methanol diffusion coefficient, and high selectivity make the use of these composite membranes in DMFCs quite attractive. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2871–2879, 2007     

Selective recognition of Triamterene in biological samples by molecularly imprinted monolithic column with a pseudo template employed

Melamine (MAM) was employed as a pseudo template to prepare a molecularly imprinted polymer monolithic column which presents the ability of selective recognition to Triamterene (TAT), whose structure was similar to that of MAM. Methacrylic acid and ethylene glycol dimethacrylate were applied as functional monomer and cross‐linker, respectively, during the in situ polymerization process. Chromatographic behaviors were evaluated, the results indicated that the molecularly imprinted polymer monolithic column possessed excellent affinity and selectivity for TAT, and the imprinting factor was high up to 3.99 when 7:3 of ACN/water v/v was used as mobile phase. In addition, the dissociation constant and the binding sites were also determined by frontal chromatography as 134.31 μmol/L and 132.28 μmol/g, respectively, which demonstrated that the obtained molecularly imprinted polymer monolith had a high binding capacity and strong affinity ability to TAT. Furthermore, biological samples could be directly injected into the column and TAT was enriched with the optimized mobile phase. These assays gave recovery values higher than 91.60% with RSD values that were always less than 3.5%. The molecularly imprinted monolithic column greatly simplified experiment procedure and can be applied to preconcentration, purification, and analysis of TAT in biological samples.     

Coatings of one monomer molecularly imprinted polymers for open tubular capillary electrochromatography

One monomer molecularly imprinted polymer coatings were first synthesized in fused silica capillary columns with 2-methacrylamidopropyl methacrylate (MAM) as single functional monomer in addition to a cross-linking monomer. Since MAM may generate no or little EOF, a strategy of precursor of polymerization, which does not interfere with the formation of defined imprints, was used to introduce an ionizable functional monomer to generate a stable electroosmotic flow for electrochromatography (CEC) by post-polymerization hydrolization. The resulting MAM-based open-tubular imprinted capillary was able to separate enantiomers by means of CEC. The resolution of enantiomers separation achieved on S-amlodipine-imprinted capillary was up to 16.1. The strong recognition ability (selectivity factor was 3.23) and high column performance (theory plates was 26,053 plates m(-1)) of template were obtained. The MIP coatings were also prepared using either S-naproxen or S-ketoprofen as template molecule. The resolutions of enantiomers separation were 2.20 and 4.56, respectively. The results illustrate that the synthesis of MIP using one monomer is not only an experimental-simplified process, but also an approach to producing chiral stationary phase with high efficiency and selectivity.     

对苯二胺分子印迹聚合物的分子识别特性

以对苯二胺(p-PD)为模板分子,分别以甲基丙烯酸(MAA)和丙烯酰胺(AA)为功能单体,制备了p-PD的印迹聚合物P(MAA)和P(AA),采用色谱法考察了其分子识别特性。结果表明,P(AA)对p-PD无明显的印迹效应;而甲醇为流动相时,P(MAA)能够选择性结合p-PD分子(k′=3.57),对p-PD有显著的印迹效应(印迹因子IF=2.95),P(MAA)柱可以实现p-PD与邻苯二胺(o-PD)和对氨基苯甲酸(p-ABA)的色谱分离。通过光谱实验及HF/6-31G*量化理论计算方法,对比研究了p-PD与MAA和AA之间的相互作用。MAA与p-PD能够形成更稳定的复合物,P(MAA)对p-PD具有更好的分子识别能力。研究表明紫外吸收光谱法和荧光光谱法以及量子化学理论计算法可作为功能单体筛选的有效手段;对于荧光模板分子,荧光光谱法具有简便、灵敏等特点。     

Preparation and evaluation of temperature and magnetic dual‐responsive molecularly imprinted polymers for the specific enrichment of formononetin

Thermo‐responsive magnetic molecularly imprinted polymers were prepared by simple surface molecular imprinting polymerization for the selective adsorption and enrichment of formononetin from Trifolium pretense by temperature regulation. Using formononetin as a template, N‐isopropylacrylamide as the thermo‐responsive functional monomer, and methacrylic acid as an assisting functional monomer, the polymers were synthesized on the surface of the magnetic substrate. The results show that imprinted polymers attained controlled adsorption of formononetin in response to the temperature change, with large adsorption capacity (16.43 mg/g), fast kinetics (60 min) and good selectivity at 35°C compared with that at 25 and 45°C. The selectivity experiment indicated that the materials had excellent recognition ability for formononetin and the selectivity factors were between 1.32 and 2.98 towards genistein and daidzein. The excellent linearity was attained in the range of 5–100 μg/mL, with low detection limits and low quantitation limits of 0.017 and 0.063 μg/mL, respectively. Furthermore, the thermo‐responsive magnetic molecularly imprinted polymers were successfully utilized for enriching and purifying formononetin from Trifolium pretense. The analytical results indicate that the imprinted polymers are promising materials for selective identification and enrichment of formononetin in complicated herbal medicines by simple temperature‐responsive regulation.     

Fe-doped TiO2/SiO2 nanofibrous membranes with surface molecular imprinted modification for selective photodegradation of 4-nitrophenol

Fe-doped TiO₂/SiO₂ nanofibrous membranes with molecular imprinted modification on the surface, were fabricated and used for selective degradation of 4-nitrophenol.     

Chiral separation membranes from modified polysulfone having myrtenal-derived terpenoid side groups

Novel polymeric materials, having a chiral environment, were obtained by the reaction of lithiated polysulfone with chiral terpenoid myrtenal. The resulting polymers gave self-standing durable membranes. Molecularly imprinted membranes were prepared from the novel myrtenal-containing polysulfones by the presence of print molecules during the membrane preparation process. The d-isomer imprinted membrane showed d-isomer adsorption and diffusivity selectivity, and vice versa. As a result, the d-isomer imprinted membrane transported the d-isomer in preference to the l-isomer, and vice versa. The control non-imprinted membrane also showed permselectivity toward racemic glutamic acid mixtures. The expression of permselectivity for the molecularly imprinted membranes was synergistically due to adsorption and diffusivity selectivity.     

A novel voltammetric sensor for ascorbic acid based on molecularly imprinted poly(o-phenylenediamine-co-o-aminophenol)

A molecularly imprinted copolymer, poly(o-phenylenediamine-co-o-aminophenol) (PoPDoAP), was prepared as a new ascorbic acid (AA) sensor. The copolymer was synthesized by incorporation of AA as template molecules during the electrochemical copolymerization of o-phenylenediamine and o-aminophenol, and complementary sites were formed after the copolymer was electrochemically reduced in ammonium aqueous solution. The molecularly imprinted copolymer sensor exhibited a high sensitivity and selectivity toward AA. Differential pulse voltammograms (DPVs) showed a linear concentration range of AA from 0.1 to 10 mM, and the detection limit was calculated to be 36.4 μM. Compared to conventional polyaniline-based AA sensors, the analytical performance of the imprinted copolymer sensor was improved due to the broadened usable pH range of PoPDoAP (from pH 1.0 to pH 8.0). The sensor also exhibited a good reproducibility and stability. And it has been successfully applied in the determination of AA in real samples, including vitamin C tablet and orange juices, with satisfactory results.     

Acrylonitrile-acrylic acid copolymer membrane imprinted with uric acid for clinical uses

The preparation of new polymeric membranes using molecular imprinting technology for application in blood filtration devices is described. Membranes, based on an acrylic acid-acrylonitrile copolymer, produced through phase inversion, were modified by introducing specific binding sites for uric acid into their structure. The materials prepared are intended for use to selectively remove uric acid from the blood in the case of increased serum uric acid values associated with different pathologies. The interactions at a molecular level between the membrane forming copolymer and the template were investigated by means of calorimetry, infrared spectroscopy and morphological analysis. The presence of interactions between the template and the copolymer, and a good thermal stability of the imprinted membranes were observed. In addition, the results of rebinding tests on the imprinted membranes indicated a good capacity of molecular recognition for the template and satisfactory selectivity properties towards compounds of similar structure such as theophylline. Membrane permeability values suggest their application as (ultra) haemofiltration devices. Poly(acrylonitrile-co-acrylic acid) membrane.     

Selective recognition of organic pollutants in aqueous solutions with composite imprinted membranes

In this work, thin-layer composite membranes imprinted with desmetryn or ibuprofen were prepared and studied for selective recognition of the template compounds in aqueous solutions. The imprinted membranes were developed using photoinitiated copolymerization of 2-acrylamido-2-methyl-1-propane sulphonic acid and N,N'-methylene-bis-acrylamide, in the presence of desmetryn or via copolymerization of dimethylaminoethyl methacrylate, and trimethylopropane trimethacrylate, in the presence of ibuprofen, followed by deposition of the imprinted layers on the surface of porous microfiltration supports of various chemical nature. Atomic force microscopy was used to study the surface morphological characteristics of the developed membranes. Molecularly recognition properties of imprinted membranes were evaluated by measuring their capability to bind the template molecules from polycomponent aqueous solutions. It was shown that obtained membranes may be used as selective recognising elements of portative differential capacitor sensor device for express monitoring of the target molecules in water. The sensor performance is based on registration of the alteration of dielectric permeability of composite imprinted membrane at selective binding of template molecules, when the analyzed feed solution is filtered through the membrane sample.     

Development of ion-sensitive field-effect transistor-based sensors for benzylphosphonic acids and thiophenols using molecularly imprinted TiO2 films

Molecularly imprinted polymeric membranes, containing artificial recognition sites for a number of benzylphosphonic acid derivatives, were prepared by the polymerization of titanium(IV) butoxide in the presence of a titanium(IV) phosphonate complex. Reference polymers were prepared in the same manner but in the absence of the phosphonate template. FTIR spectroscopy was used to follow the formation of a benzylphosphonic acid-Titanium(IV) oxide complex during the imprinting process, and upon the association of the substrate in the imprinted TiO₂ thin film. The imprinted polymers were examined as sensing membranes in an ion-sensitive field-effect transistors (ISFETs). The sensors reveal selectivity towards analyzing the imprinted substrates, yet the recognition ability of the sensors strongly depends on the substituents associated with the phosphonic acid structures. The response time of the sensors is ca. 45 s, and the sensors reveal unaffected stability for at least 2 weeks. Also, imprinted TiO₂ films for thiophenol, and para-nitrothiophenol were generated on ISFET devices, and the respective substrates were selectively sensed by the functional devices.