The structure of mixed nonionic surfactant monolayers at the air-water interface: the effects of different alkyl chain lengths

The structure of mixed nonionic surfactant monolayers of monodecyl hexaethylene glycol (C10E6) and monotetradecyl hexaethylene glycol (C14E6) adsorbed at the air-water interface has been determined by specular neutron reflectivity. Using partial isotopic labeling (deuterium for hydrogen) of the alkyl and ethylene oxide chains of each surfactant, the distribution and relative positions of the chains at the interface have been obtained. The packing of the two different alkyl chain lengths results in structural changes compared to the pure surfactant monolayers. This results in changes in the relative positions of the alkyl chains and of the ethylene oxide chains at the interface. The role of the alkyl chain length is contrasted with that of the ethylene oxide chain length, determined from results reported previously on the nonionic surfactant mixture of monododecyl triethylene glycol (C12E3) and monododecyl octaethylene glycol (C12E8).     

Second generation specific-enzyme-activated rotaxane propeptides

A [2]rotaxane, in which the peptidic axle is protected from degradation by the macrocyclic sheath and terminated with a novel glycosidase-cleavable stopper, is rendered water-soluble by derivatisation with tetra(ethylene glycol) (TetEG) or glucosylated tetra(ethylene glycol) (Glc-TetEG) chains using the CuAAC 'click' reaction. The Glc-TetEG-derivatised rotaxane propeptide is >50?000 times more soluble in aqueous media than the parent rotaxane. Activation of the water-soluble rotaxane propeptide with a β-galactosidase efficiently releases the parent peptide.     

Synthesis of penta-p-phenylenes with oligo(ethylene glycol) side chains

We report an efficient synthesis of a series of penta-p-phenylene derivatives with four side chains of various lengths, including deca(ethylene glycol) groups. The key feature of the synthesis is that the side chains are efficiently introduced in the last step, facilitating optimization of the side chains for different applications. Raman spectroscopy study indicates a similarly high rigidity for all these compounds, even those with long oligo(ethylene glycol) side chains. The deca(ethylene glycol)-substituted penta-p-phenylene derivatives are versatile building blocks for construction of nanometric, tripod-shaped adsorbates for biological applications.     

Ultrafast dynamics of liquid poly(ethylene glycol)s and crown ethers studied by femtosecond Raman-induced Kerr effect spectroscopy

Ultrafast molecular dynamics of liquid poly(ethylene glycol)s, tetra(ethylene glycol), penta(ethylene glycol), and poly(ethylene glycol) with the molecular weight of 600, and crown ethers, 12-crown-4 and 15-crown-5, have been investigated by means of femtosecond optical heterodyne-detected Raman-induced Kerr effect spectroscopy. Picosecond Kerr transients of poly(ethylene glycol)s and crown ethers are characterized by a biexponential function with the time constants of about 2 and 20 ps. Both the faster and slower time constants do not vary much among the five oligo(ethylene oxide)s. Femtosecond dynamics is discussed based on the Kerr (depolarized Raman) spectra obtained by Fourier transform deconvolution analysis of the high time resolution Kerr transients. The broad low-frequency band (0-200 cm(-1)) in the Kerr spectrum is analyzed by two Brownian oscillators. The spectral shapes of linear poly(ethylene glycol) and cyclic crown ether are very different. Both the low- and high-frequency Brownian oscillators for crown ethers show lower frequency and broader spectral features than those for poly(ethylene glycol)s. The comparison of the low-frequency spectra of poly(ethylene glycol)s and crown ethers shows that the low-frequency spectrum of 15-crown-5 is closer to that of poly(ethylene glycol)s than that of 12-crown-4 is. The difference of the low-frequency spectra between poly(ethylene glycol) and crown ether is discussed with the concepts of molecular conformation and liquid density. The features of the observed intramolecular vibrational bands are also correlated with the molecular conformations.     

Multigram synthesis of well-defined extended bifunctional polyethylene glycol (PEG) chains

A series of novel, well-defined, unsymmetrical poly(ethylene glycol) chains of the type X(OCH(2)CH(2))(n)()Y (where X = protecting group; Y = nucleofuge or a different protecting group; n = 3, 6, 9, 12, 15, 18, and 24) were prepared in high yields by applying orthogonal protecting groups. The purity of the compounds was fully verified by elemental and high-resolution mass spectrometry analyses.     

Dual crosslinked phenylethynyl end‐capped sulfonated polyimides via the ethynyl and sulfonate groups promoted by PEG

Typically, phenylethynyl (PE) end‐capped oligomides require a temperature of 370 °C for 1 h to develop a crosslinked system. A published method using poly(ethylene glycol)s (DM‐PEG‐250 and PEG‐400) as cosolvents with NMP was effective in crosslinking the ethynyl end‐caps at 250 °C/3 h in nonsulfonated oligomides. The application of this novel crosslinked method to PE end‐capped sulfonated oligomides was effective but caused a secondary crosslinked network via the sulfonic acid groups and ethylene glycol solvents. The solid‐state ¹³C NMR spectral data on ¹³C‐labeled end‐caps in the PE‐3F‐SPI‐3 oligomide provide evidence for the ethynyl to ethynyl and ethylene oxide sulfonate ester dual crosslinked structure. Infrared spectroscopy of model compounds also provides evidence for the presence of crosslinked sulfonate ester and appended sulfonate ester side chains. ¹³C NMR also provided quantitative data on the extent of the ethynyl to ethynyl crosslinking reaction and sulfonate ester crosslinks and side chains. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Raman study of the rigidity of penta-p-phenylene derivatives used as legs in molecular tripods

Molecular planarity of penta-p-phenylene (P5P) and several substituted derivatives with four side chains of various lengths, including deca(ethylene glycol) groups, is discussed by considering the changes in the intensity ratio between the Raman bands recorded at 1280 and 1220 cm(-1). The intensity ratio between both bands I(1280)/I(1220) shows a small increase with the size of the substituent, indicating a high rigidity for all these compounds, even those with long oligo(ethylene glycol) side chains. This result is important given that these phenylene derivatives are versatile building blocks for the construction of nanometric tripod-shaped adsorbates for biological applications since the side chains should prevent the nonspecific interaction with proteins.     

NMR spectroscopy and free volume analysis of the effects of copolymer composition on the swelling kinetics and chain dynamics of highly crosslinked copolymers of acrylic acid with PEG‐containing multiacrylates

Novel ionizable polymer networks were prepared from oligo(ethylene glycol) (OEG) multiacrylates and acrylic acid (AA), employing bulk radical photopolymerization techniques. The properties of these materials exhibited a complex dependence on the network structure and composition. Penetrant sorption experiments demonstrated that the crosslinked structure of the copolymers depended very strongly on the AA content as well as the number of ethylene glycol groups. The impact of varying the AA content and the oligo(ethylene glycol) chain length on the polymer chain dynamics was examined using diffusion and ¹³C NMR relaxation studies. The penetrant uptake studies indicated a coupling of Fickian and relaxation‐driven contributions to the swelling behavior. The effect of increasing the AA content on the characteristic chain relaxation time was reversed as the oligo(ethylene glycol) chain length was varied, indicating that chain relaxation is controlled by structural considerations, for shorter oligo(ethylene glycol) chains, and by compositional considerations, for longer oligo(ethylene glycol) chains. Measured compositional effects on solid state ¹³C NMR relaxation times supported these conclusions. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1953–1968, 1999     

Synthesis and characterization of PEGylated comb-like cationic polymer by polycondensation and ATRP

PEGylated poly(2-(dimethylamino)ethyl methacrylate) with comb-like architecture was synthesized by two-step polymerization. First,poly(oligo(ethylene glycol) malicate)(POEGMA) bearing pendant hydroxyl groups was prepared by direct polycondensation of oligo(ethylene glycol) and malic acid in the presence of scandium triflate as chemoselective catalyst.Then the poly(2- (dimethylamino)ethyl methacrylate) side chains were grafted from the POEGMA backbone by atom transfer radical polymerization (ATRP) after the hydroxyl groups were modified into bromo-ester form,resulting in a PEGylated cationic copolymer with branched architecture.     

Synthesis of a series of oligo(ethylene glycol)-terminated alkanethiol amides designed to address structure and stability of biosensing interfaces.

A strategy for the synthesis of a series of closely related oligo(ethylene glycol)-terminated alkanethiol amides (principally HS(CH(2))(m)CONH(CH(2)CH(2)O)(n)H; m = 2, 5, 11, 15, n = 1, 2, 4, 6, 8, 10, 12) and analogous esters has been developed. These compounds were made to study the structure and stability of self-assembled monolayers (SAMs) on gold in the prospect of designing new biosensing interfaces. For this purpose, monodisperse heterofunctional oligo(ethylene glycols) with up to 12 units were prepared. Selective monoacylation of the symmetrical tetra- and hexa(ethylene glycol) diols as their mesylates with the use of silver(I) oxide was performed. The synthetic approach was based on carbodiimide couplings of various oligo(ethylene glycol) derivatives to omega-(acetylthio) carboxylic acids via a terminal amino or hydroxyl function. SAM structures on gold were studied with respect to thickness, wettability (water contact angles approximately 30 degrees ), and conformation. A good fit was obtained for the relation between monolayer thickness (d) and the number of units in the oligo(ethylene glycol) chain (n): d = 2.8n + 21.8 (A). Interestingly, the corresponding infrared spectroscopy analysis showed a dramatic change in conformation of the oligomeric chains from all-trans (n = 4) to helical (n > or = 6) conformation. A crystalline helical structure was observed in the SAMs for n > 6.     

Functionalization of hydrogen-terminated silicon via surface-initiated atom-transfer radical polymerization and derivatization of the polymer brushes

Surface-initiated atom-transfer radical polymerization (ATRP) of poly(ethylene glycol) monomethacrylate (PEGMA) was carried out on the hydrogen-terminated Si(100) substrates with surface-tethered alpha-bromoester initiator. Kinetic studies confirmed an approximately linear increase in polymer film thickness with reaction time, indicating that chain growth from the surface was a controlled "living" process. The "living" character of the surface-grafted PEGMA chains was further ascertained by the subsequent extension of these graft chains, and thus the graft layer. Well-defined polymer brushes of near 100 nm in thickness were grafted on the Si(100) surface in 8 h under ambient temperature in an aqueous medium. The hydroxyl end groups of the poly(ethylene glycol) (PEG) side chains of the grafted PEGMA polymer were derivatized into various functional groups, including chloride, amine, aldehyde, and carboxylic acid groups. The surface-functionalized silicon substrates were characterized by reflectance FT-IR spectroscopy and X-ray photoelectron spectroscopy (XPS). Covalent attachment and derivatization of the well-defined PEGMA polymer brushes can broaden considerably the functionality of single-crystal silicon surfaces.     

Mono,di, tri and tetraethylene glycol: Spectroscopic characterization using density functional method and experiment

We report infrared and electronic absorption spectra of mono, di, tri and tetra ethylene glycol (EG) in gas phase, their cation and anion and in water solvent using density functional theory calculations at B3LYP/TZVP level. Structural paramaters, rotational and centrifugal distortional constants and dipole moments are also reported. A siginificant shifts in vibrational frequencies and peaks in electronic absorption spectra have been observed upon ionization of mono, di, tri and tetra ethylene glycols. We have also obtained experimental vibrational spectrum of monoethylene glycol. Vibrational frequencies of mono ethylene glycol from theory and experiment are compared. We have used integral equation formalism polarizable continuum model (IEFPCM) model to study the influence of water solvent on vibrational frequencies of neutral mono, di, tri and tetra ethylene glycol. Electronic absorption spectra for these molecules have been obtained using Time dependent density functional theory (TDDFT).     

New deuterated oligo(ethylene glycol) building blocks and their use in the preparation of surface active lipids possessing labeled hydrophilic tethers

For the introduction of additional analysis protocols of tethered molecules, a method is presented to prepare functionalized, deuterated oligo(ethylene glycols) from ethylene glycol-d4. Partial oligomerization of ethylene glycol-d4 and conversion to ditosylates is accompanied by coupling reactions to prepare doubly benzyl protected oligo(ethylene glycols) with two to five repeating units. The tetramer bearing 16 deuteria was elaborated at both ends to eventually prepare 2,3-di-O-phytanyl-sn-glycerol-1-tetraethylene glycol-d,l-alpha-lipoic acid ester (DPTL), which bears a fully deuterated tetra(ethylene glycol) spacer group. Through linking of functionalized components, an analogue of DPTL possessing an octa(ethylene glycol) spacer group was prepared, both in deuterated and unlabeled form.     

Biocompatible polystyrenes containing pendant tetra(ethylene glycol) and phosphorylcholine groups

The synthesis and characterization of styrene‐based polymers and copolymers containing pendant tetra(ethylene glycol) and phosphorylcholine groups is reported. These polymers are obtained via radical polymerization reactions using α,α′‐azobis(isobutyronitrile) as the initiator, and are developed as protective biocompatible coatings for implantable biosensors. Cell morphology studies show that none of the synthesized polymers and copolymers are toxic, and that the rate of cell growth can be tuned by changing the monomer composition. The presence of tetra(ethylene glycol) groups in the coatings lowers the protein adsorption, thereby influencing the rate of cell growth. An equally profound effect is observed when a low percentage of phosphorylcholine groups is present in the polymers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 468–474, 2001     

Synthesis of double hydrophilic graft copolymer containing poly(ethylene glycol) and poly(methacrylic acid) side chains via successive ATRP

A well‐defined double hydrophilic graft copolymer, with polyacrylate as backbone, hydrophilic poly(ethylene glycol) and poly(methacrylic acid) as side chains, was synthesized via successive atom transfer radical polymerization followed by the selective hydrolysis of poly(methoxymethyl methacrylate) side chains. The grafting‐through strategy was first used to prepare poly[poly(ethylene glycol) methyl ether acrylate] comb copolymer. The obtained comb copolymer was transformed into macroinitiator by reacting with lithium diisopropylamine and 2‐bromopropionyl chloride. Afterwards, grafting‐from route was employed for the synthesis of poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methoxymethyl methacrylate) amphiphilic graft copolymer. The molecular weight distribution of this amphiphilic graft copolymer was narrow. Poly(methoxymethyl methacrylate) side chains were connected to polyacrylate backbone through stable C? C bonds instead of ester connections. The final product, poly[poly(ethylene glycol) methyl ether acrylate]‐g‐poly(methacrylate acid), was obtained by selective hydrolysis of poly(methoxymethyl methacrylate) side chains under mild conditions without affecting the polyacrylate backbone. This double hydrophilic graft copolymer was found be stimuli‐responsive to pH and ionic strength. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4056–4069, 2008     

Highly water-soluble neutral BODIPY dyes with controllable fluorescence quantum yields

A series of novel highly water-soluble neutral BODIPY dyes have been obtained by functionalization of BODIPY dyes with branched oligo(ethylene glycol)methyl ether groups at positions 8, 2 and 6 or 4 and 4'. Use of an ortho-substituent group of branched oligo(ethylene glycol)methyl ether on the meso-phenyl ring of BODIPY dyes and replacement of the fluorine atoms of BODIPY dyes at positions 4 and 4' with methyloxy or ethynyl subunits significantly enhance fluorescence quantum yields of BODIPY dyes.     

Development of chlorotriazine polymer dehydrocondensing reagents (Poly-Trzs)

Polymer-type dehydrocondensing reagents comprising of a triazine dehydrocondensing reagent, itself in a polymerized form (Poly-Trz—MMs'), have been developed by exploiting the chemical properties of cyanuric chloride that readily binds to alcohol or amines. A chlorotriazine polymer bearing two alkoxy substituents at the 4- and 6- positions (Poly-O-Trz-Cl) was prepared by alternating copolymerization between cyanuric chloride and tetra(ethylene glycol). Similarly, polymers bearing both alkoxy and amino substituents (Poly-N-Trz-Cl) were synthesized from tetra(ethylene glycol) bis(4,6-dichlorotriazin-2-yl) ether 6 and tris(2-aminoethyl)amine 7 and/or ethylenediamine 8. All the polymers were shown to be good reagents for dehydrocondensation of carboxylic acids and amines in the presence of NMM, compared to the corresponding monomeric dehydrocondensing reagent (DMT-MM). The advantages of the polymeric reagents are as follows: (1) both the reaction and isolation procedure of dehydrocondensation can be greatly simplified, (2) the dehydrocondensation can be conducted in protic solvents as well as in common organic solvents, (3) the reagents can be efficiently prepared at a low cost, and (4) these reagents are considered eco-friendly, generating a lower amount of waste compared to conventionally related reagents because of high loading of the dehydrocondensing activity (ca. 3 mequiv/g).     

Systematic studies on structural parameters for nanotubular assembly of hexa-peri-hexabenzocoronenes

Thirteen different hexa-peri-hexabenzocoronenes (HBCs) I-III were newly synthesized, and their self-assembling behaviors were investigated. Taking into account also the reported behaviors of amphiphilic HBCs, some structural parameters of HBC essential for the tubular assembly were revealed. Points to highlight include (1) the importance of two phenyl groups attached to one side of the HBC unit, (2) essential roles of long paraffinic side chains on the other side of the phenyl groups, and (3) no necessity of hydrophilic oligo(ethylene glycol) side chains. The hierarchical nanotubular structure, rendered by virtue of a synchrotron radiation technique, was virtually identical to our previous proposal, where the nanotubes are composed of helically coiled bilayer tapes with a tilting angle of approximately 45 degrees. Each tape consists of pi-stacked HBC units, where the inner and outer HBC layers are connected by interdigitation of paraffinic side chains. The coiled structure is most likely caused by a steric congestion of the phenyl groups attached to the HBC unit, whose tilting direction may determine the handedness of the helically chiral nanotube.     

Comb-shaped homo- and copoly(arylene ether ketones) containing hydrophilic groups in side chains

Comb-shaped poly(arylene ether ketones) containing hydrophilic fragments in side chains are synthesized through the interaction of side reactive carboxyl groups of poly(arylene ether ketones) with methyl ethers of poly(ethylene glycol). Films based on these polymers possess tensile strengths up to 89 MPa and relative elongations at break up to 340%. Comb-shaped poly(arylene ether ketones) swell in water, and some of them show solubility in ethanol and methanol.     

Supramolecular interactions between beta-cyclodextrin and hydrophobically end-capped poly(ethylene glycol)s: a quartz crystal microbalance study

In this study, the supramolecular interactions occurring between beta-cyclodextrin-based surfaces and macromolecular chains modified at one end with naphthyl, adamantyl, or phenyladamantyl hydrophobic groups were investigated by means of a quartz crystal microbalance. beta-Cyclodextrin-functionalized gold electrodes were obtained through the amide-coupling reaction between mono-6-deoxy-6-amino-beta-cyclodextrin and 11-mercaptoundecanoic acid self-assembled monolayer allowing the reproducible preparation of densely grafted surfaces with host properties. The interaction data obtained for the three different modified poly(ethylene glycol)s are in good agreement with our previous studies performed by high performance liquid chromatography and surface plasmon resonance. This evidences that the driving force for the supramolecular interaction is based on the inclusion of the hydrophobic terminal group of the chains within the cyclodextrin cavities. The reversibility of the inclusion process was proven through the regeneration of the original host properties of the sensing surfaces using sodium dodecylsulfate as a competitor for the desorption of the poly(ethylene glycol) chains.