Glutathione peroxidase (GPx)-like antioxidant activity of the organoselenium drug ebselen: unexpected complications with thiol exchange reactions

The factors that are responsible for the relatively low glutathione peroxidase (GPx)-like antioxidant activity of organoselenium compounds such as ebselen (1, 2-phenyl-1,2-benzisoselenazol-3(2H)-one) in the reduction of hydroperoxides with aromatic thiols such as benzenethiol and 4-methylbenzenethiol as cosubstrates are described. Experimental and theoretical investigations reveal that the relatively poor GPx-like catalytic activity of organoselenium compounds is due to the undesired thiol exchange reactions that take place at the selenium center in the selenenyl sulfide intermediate. This study suggests that any substituent that is capable of enhancing the nucleophilic attack of thiol at sulfur in the selenenyl sulfide state would enhance the antioxidant potency of organoselenium compounds such as ebselen. It is proved that the use of thiol having an intramolecularly coordinating group would enhance the biological activity of ebselen and other organoselenium compounds. The presence of strong S...N or S...O interactions in the selenenyl sulfide state can modulate the attack of an incoming nucleophile (thiol) at the sulfur atom of the -Se-S- bridge and enhance the GPx activity by reducing the barrier for the formation of the active species selenol.     

A simple and efficient strategy to enhance the antioxidant activities of amino-substituted glutathione peroxidase mimics

The glutathione peroxidase (GPx) activities of some diaryl diselenides incorporating tertiary amino groups were studied with H(2)O(2), Cum-OOH, and tBuOOH as substrates and with PhSH as thiol co-substrate. Simple replacement of a hydrogen atom with a methoxy group dramatically enhances the GPx activity. The introduction of methoxy substituents ortho to selenium in N,N-dialkylbenzylamine-based compounds makes the basicity of the amino groups perfect for the catalysis. The presence of 6-OMe groups prevents possible SeN interactions in the selenols, increasing their zwitterionic characters. The methoxy substituents also protect the selenium in the selenenic acid intermediates from overoxidation to seleninic acids or irreversible inactivation to selenonic acid derivatives. The additional substituents also play a crucial role in the selenenyl sulfide intermediates, by preventing thiol exchange reactions-which would normally lead to an inactivation pathway-at the selenium centers. The strengths of SeN interactions in the selenenyl sulfide intermediates are dramatically reduced upon introduction of the methoxy substituents, which not only reduce the thiol exchange reactions at selenium but also enhance the nucleophilic attack of the incoming thiols at sulfur. The facile attack of thiols at sulfur in the selenenyl sulfides also prevents the reactions between the selenenyl sulfides and H(2)O(2) that can regenerate the selenenic acids (reverse-GPx cycle). These studies reveal that the simple 6-OMe groups play multiple roles in each of the catalytically active intermediates by introducing steric and electronic effects that are required for efficient catalysis.     

Modeling Thioredoxin Reductase-Like Activity with Cyclic Selenenyl Sulfides: Participation of an NH⋅⋅⋅Se Hydrogen Bond through Stabilization of the Mixed Se−S Intermediate

At the redox-active center of thioredoxin reductase (TrxR), a selenenyl sulfide (Se−S) bond is formed between Cys497 and Sec498, which is activated into the thiolselenolate state ([SH,Se⁻]) by reacting with a nearby dithiol motif ([SH^Cys59,SH^Cys64]) present in the other subunit. This process is achieved through two reversible steps: an attack of a cysteinyl thiol of Cys59 at the Se atom of the Se−S bond and a subsequent attack of a remaining thiol at the S atom of the generated mixed Se−S intermediate. However, it is not clear how the kinetically unfavorable second step progresses smoothly in the catalytic cycle. A model study that used synthetic selenenyl sulfides, which mimic the active site structure of human TrxR comprising Cys497, Sec498, and His472, suggested that His472 can play a key role by forming a hydrogen bond with the Se atom of the mixed Se−S intermediate to facilitate the second step. In addition, the selenenyl sulfides exhibited a defensive ability against H₂O₂-induced oxidative stress in cultured cells, which suggests the possibility for medicinal applications to control the redox balance in cells.     

Glutathione peroxidase-like antioxidant activity of diaryl diselenides: a mechanistic study.

The synthesis, structure, and thiol peroxidase-like antioxidant activities of several diaryl diselenides having intramolecularly coordinating amino groups are described. The diselenides derived from enantiomerically pure R-(+)- and S-(-)-N,N-dimethyl(1-ferrocenylethyl)amine show excellent peroxidase activity. To investigate the mechanistic role of various organoselenium intermediates, a detailed in situ characterization of the intermediates has been carried out by (77)Se NMR spectroscopy. While most of the diselenides exert their peroxidase activity via selenol, selenenic acid, and selenenyl sulfide intermediates, the differences in the relative activities of the diselenides are due to the varying degree of intramolecular Se.N interaction. The diselenides having strong Se.N interactions are found to be inactive due to the ability of their selenenyl sulfide derivatives to enhance the reverse GPx cycle (RSeSR + H(2)O(2) = RSeOH). In these cases, the nucleophilic attack of thiol takes place preferentially at selenium rather than sulfur and this reduces the formation of selenol by terminating the forward reaction. On the other hand, the diselenides having weak Se.N interactions are found to be more active due to the fast reaction of the selenenyl sulfide derivatives with thiol to produce diphenyl disulfide and the expected selenol (RSeSR + PhSH = PhSSPh + RSeH). The unsubstituted diaryl diselenides are found to be less active due to the slow reactions of these diselenides with thiol and hydrogen peroxide and also due to the instability of the intermediates. The catalytic cycles of 18 and 19 strongly resemble the mechanism by which the natural enzyme, glutathione peroxidase, catalyzes the reduction of hydroperoxides.     

Chemistry in Thyroid Gland: Iodothyronine Deiodinases and Anti-Thyroid Drugs

Abstract

The monodeiodination of the prohormone thyroxine (T4) to the biologically active hormone 3,5,3′-triiodothyronine (T3) is the first step in thyroid hormone action and the type I iodothyronine deiodinase (ID-I), an enzyme containing selenocysteine in its active site, is responsible for most of this conversion. ID-I is an integral membrane protein present in highest amounts in liver, kidney, and thyroid. In the deiodinase cycle, the selenol group of the enzyme (E-SeH) first reacts with T4 to form a selenenyl iodide (E-SeI) with a release of the deiodinated iodothyronine. Subsequent reaction of the E-SeI with a thiol of other cofactors releases I^? and regenerates the active site. The thiourea drug, 6-n-propylthiouracil (PTU), reacts with the E-SeI intermediate to inhibit the enzyme active site regeneration. Owing to this property, PTU and related sulfur derivatives are often used in the acute treatment of severely hyperthyroid (Graves disease) patients and therefore commonly known as antithyroid drugs. Although the formation of a mixed selenenyl sulfide (ESe-S-PTU) adduct has been proposed to be a possible way of inhibition, it is still a matter of debate whether PTU reacts with a well-defined Se-I bond of it reacts with an equivalent species or directly with the enzyme active site. In view of this, the first successful model studies on the reactivity of PTU towards synthetic organoselenenyl iodides (RSeI) have been carried out and the results will be discussed as a basis for the deiodinase inhibition. On the basis of experimental data, a mechanism for the inhibition of ID-I by thiouracil drugs and possible amino acid residues responsible for the inhibition will be discussed.     

Thiol cofactors for selenoenzymes and their synthetic mimics

The importance of selenium as an essential trace element is now well recognized. In proteins, the redox-active selenium moiety is incorporated as selenocysteine (Sec), the 21st amino acid. In mammals, selenium exerts its redox activities through several selenocysteine-containing enzymes, which include glutathione peroxidase (GPx), iodothyronine deiodinase (ID), and thioredoxin reductase (TrxR). Although these enzymes have Sec in their active sites, they catalyze completely different reactions and their substrate specificity and cofactor or co-substrate systems are significantly different. The antioxidant enzyme GPx uses the tripeptide glutathione (GSH) for the catalytic reduction of hydrogen peroxide and organic peroxides, whereas the larger and more advanced mammalian TrxRs have cysteine moieties in different subunits and prefer to utilize these internal cysteines as thiol cofactors for their catalytic activity. On the other hand, the nature of in vivo cofactor for the deiodinating enzyme ID is not known, although the use of thiols as reducing agents has been well-documented. Recent studies suggest that molecular recognition and effective binding of the thiol cofactors at the active site of the selenoenzymes and their mimics play crucial roles in the catalytic activity. The aim of this perspective is to present an overview of the thiol cofactor systems used by different selenoenzymes and their mimics.     

Modeling the mechanism of the glutathione peroxidase mimic ebselen

Ebselen (1), the quintessential mimic of the antioxidant selenoenzyme glutathione peroxidase (GPx), is a potential chemopreventative for various diseases associated with oxidative stress. Density-functional theory (DFT) and solvent-assisted proton exchange (SAPE) are used to model the complex mechanism for scavenging of reactive oxygen species by 1. SAPE is a microsolvation method designed to approximate the role of bulk solvent in chemical processes involving proton transfer. Consistent with experimental studies, SAPE studies predict the reaction of 1 with thiol (RSH) to form a selenenyl sulfide 2 to be preferred under most conditions, with an alternate pathway through a selenoxide 3 possible at high reactive oxygen species (ROS) concentrations ([ROS] ? [RSH]). The reduction of 2 to the selenol 4, known to be rate-determining in the protein, has a high SAPE activation barrier due to a strong Se···O interaction which reduces the electrophilicity of the sulfur center of the -SeS- bond of 2. Thiols, such as dithiols and peptide-based thiols, are expected to overcome this barrier through structural features that increase the probability of attack at this sulfur. Thus, in vivo, the GPx-like pathway is the most likely mechanism for 1 under most circumstances, except, perhaps, under extreme oxidative stress where initial oxidation to 3 could compete with formation of 2. Simple thiols, used in various in vitro studies, are predicted by SAPE modeling to proceed through oxidation of 2 to a seleninyl sulfide intermediate. Overall, SAPE modeling provides a realistic interpretation of the redox mechanism of 1 and holds promise for further exploration of complex aqueous-phase reaction mechanisms.     

Theoretical elucidation of the antioxidant mechanism of 1,3-dihydro-1-methyl-2H-imidazole-2-selenol (MSeI)

Theoretical calculations by means of density functional theory (DFT) at the B3LYP/6-31G(d) level have been performed to elucidate the antioxidant mechanism of 1,3-dihydro-1-methyl-2H-imidazole-2-selenol (MSeI) at the molecular level. The present detailed computational study of individual steps of the mechanism provides energetics and structures of all the intermediates and transition states. DFT results suggest a highly synchronous stepwise mechanism wherein the nucleophilic attack of thiol at the sulfur atom in selenyl sulfide (TS VII-VIII) is found to be the rate-determining step, which initiates the catalytic regeneration of selenol. The current computational studies are in excellent agreement with the mechanism proposed earlier.     

Antioxidant activity of the anti-inflammatory compound ebselen: a reversible cyclization pathway via selenenic and seleninic acid intermediates

A revised mechanism that accounts for the glutathione peroxidase (GPx)-like catalytic activity of the organoselenium compound ebselen is described. It is shown that the reaction of ebselen with H(2)O(2) yields seleninic acid as the only oxidized product. The X-ray crystal structure of the seleninic acid shows that the selenium atom is involved in a noncovalent interaction with the carbonyl oxygen atom. In the presence of excess thiol, the Se--N bond in ebselen is readily cleaved by the thiol to produce the corresponding selenenyl sulfide. The selenenyl sulfide thus produced undergoes a disproportionation in the presence of H(2)O(2) to produce the diselenide, which upon reaction with H(2)O(2), produces a mixture of selenenic and seleninic acids. The addition of thiol to the mixture containing selenenic and seleninic acids leads to the formation of the selenenyl sulfide. When the concentration of the thiol is relatively low in the reaction mixture, the selenenic acid undergoes a rapid cyclization to produce ebselen. The seleninic acid, on the other hand, reacts with the diselenide to produce ebselen as the final product. DFT calculations show that the cyclization of selenenic acids to the corresponding selenenyl amides is more favored than that of sulfenic acids to the corresponding sulfenyl amides. This indicates that the regeneration of ebselen under a variety of conditions protects the selenium moiety from irreversible inactivation, which may be responsible for the biological activities of ebselen.     

Selenium-containing enzymes in mammals: Chemical perspectives

The chemical and biochemical route to the synthesis of the 21st amino acid in living systems, selenocysteine, is described. The incorporation of this rare amino acid residue into proteins is described with emphasis on the role of monoselenophosphate as selenium source. The role of selenocysteine moiety in natural mammalian enzymes such as glutathione peroxidase (GPx), iodothyronine deiodinase (ID) and thioredoxin reductase (TrxR) is highlighted and the effect of other amino acid residues located in close proximity to selenocysteine is described. It is evident from various studies that two amino acid residues, tryptophan and glutamine, appear in identical positions in all known members of the GPx family. According to the three-dimensional structure established for bovine GPx, these residues could constitute a catalytic triad in which the selenol group of the selenocysteine is both stabilized and activated by hydrogen bonding with the imino group of the tryptophan (Trp) residue and with the amido group of the glutamine (Gln) residue. The ID enzymes, on the other hand, do not possess any Trp or Gln residues in close proximity to selenium, but contain several histidine residues, which may play important roles in the catalysis. The TrxR enzymes also possess some basic histidines, but the most important amino acid residues are the cysteines which constitute the internal cofactor systems along with the catalytically active selenocysteine. The catalytic activity and substrate specificity of all three selenoenzymes are described. The reactivity of selenocysteine residues in selenoenzymes towards metal-based drugs such as goldthioglucose is also described.     

Confusion between dimethyl selenenyl sulfide and dimethyl selenone released by bacteria

Dimethyl selenone [(CH₃)₂SeO₂] has been reported in the literature as a metabolite released by bacteria in contact with selenium metal or selenium salts. In this study, mass spectral, chromatographic, and boiling-point data are presented that show that dimethyl selenone has been confused with dimethyl selenenyl sulfide (CH₃SeSCH₃). In addition, the headspaces above monocultures of selenium-resistant bacteria were examined using gas chromatography followed by fluorine-induced chemiluminescence detection. A number of alkyl sulfur and selenium species were detected, along with dimethyl selenenyl sulfide. A pathway from oxidized selenium salts to reduced methylated selenides and dimethyl selenenyl sulfide is also presented.     

Fast and Selective Modification of Thiol Proteins/Peptides by <Emphasis Type="Italic">N</Emphasis>-(Phenylseleno)phthalimide

We previously reported that selenamide reagents such as ebselen and N-(phenylseleno)phthalimide (NPSP) can be used to selectively derivatize thiols for mass spectrometric analysis, and the introduced selenium tags are useful as they could survive or removed with collision-induced dissociation (CID). Described herein is the further study of the reactivity of various protein/peptide thiols toward NPSP and its application to derivatize thiol peptides in protein digests. With a modified protocol (i.e., dissolving NPSP in acetonitrile instead of aqueous solvent), we found that quantitative conversion of thiols can be obtained in seconds, using NPSP in a slight excess amount (NPSP:thiol of 1.1–2:1). Further investigation shows that the thiol reactivity toward NPSP reflects its chemical environment and accessibility in proteins/peptides. For instance, adjacent basic amino acid residues increase the thiol reactivity, probably because they could stabilize the thiolate form to facilitate the nucleophilic attack of thiol on NPSP. In the case of creatine phosphokinase, the native protein predominately has one thiol reacted with NPSP while all of four thiol groups of the denatured protein can be derivatized, in accordance with the corresponding protein conformation. In addition, thiol peptides in protein/peptide enzymatic digests can be quickly and effectively tagged by NPSP following tri-n-butylphosphine (TBP) reduction. Notably, all three thiols of the peptide QCCASVCSL in the insulin peptic digest can be modified simultaneously by NPSP. These results suggest a novel and selective method for protecting thiols in the bottom-up approach for protein structure analysis.     

Lewis acid catalyzed ring-opening reactions of methylenecyclopropanes with diphenylphosphine oxide in the presence of sulfur or selenium

Methylenecyclopropanes undergo an interesting Lewis acid-catalyzed ring-opening reaction with diphenylphosphine oxide in the presence of sulfur or selenium upon heating at 85 degrees C in 1,2-dichloroethane to give the corresponding homoallylic thiol or selenol derivatives in good to high yields.     

Mechanism of sulfide oxidations by peroxymonocarbonate

A detailed mechanism for the oxidation of aryl sulfides by peroxymonocarbonate ion in cosolvent/water media is described. Kinetic studies were performed to characterize the transition state, including a Hammett correlation and variation of solvent composition. The results are consistent with a charge-separated transition state relative to the reactants, with an increase of positive charge on the sulfur following nucleophilic attack of the sulfide at the electrophilic oxygen of peroxymonocarbonate. In addition, an average solvent isotope effect of 1.5 +/- 0.2 for most aryl sulfide oxidations is consistent with proton transfer in the transition state of the rate-determining step. Activation parameters for oxidation of ethyl phenyl sulfide in tert-butyl alcohol/water are reported. From the pH dependence of oxidation rates and (13)C NMR equilibrium experiments, the estimated pK(a) of peroxymonocarbonate was found to be approximately 10.6.     

Effect of ring strain on nucleophilic substitution at selenium: a computational study of cyclic diselenides and selenenyl sulfides

Nucleophilic substitution reactions of small rings incorporating selenium are examined using computational methods. The potential energy surfaces of HS- and HSe- with 1,2-diselenirane, 1,2-diselenetane, 1,2-diselenolane, and 1,2-diselenane were computed at B3LYP/6-31+G(d) and MP2/6-31+G(d). The reactions of three-, four-, five-, and six-membered rings incorporating the S-Se bond with HS- were computed at B3LYP/6-31+G(d). The strained three- and four-membered diselenides and selenenyl sulfide rings undergo SN2 reactions, while the five- and six-membered rings react via the addition-elimination pathway, a path that invokes a hypercoordinate selenium intermediate. The strain in the small rings precludes the addition of a further ligand to either heteroatom. Substitution at selenium is both kinetically and thermodynamically favored over attack at sulfur.     

Selenenyl iodide: a new substrate for mammalian thioredoxin reductase

Areneselenenyl iodide stabilised by internal chelation has been synthesized and evaluated as a substrate of thioredoxin reductase (TrxR). The reactivity of TrxR obtained from human placenta towards selenenyl iodide was found to be much higher than that of the E. coli enzyme, indicating the essential nature of a selenocysteine residue in the active site of the human enzyme. The addition of thioredoxin (Trx) significantly enhanced the TrxR-catalysed reduction of selenenyl iodide 1. These studies on the reduction of a selenenyl iodide by the thioredoxin system suggest that stable selenenyl iodides could be new substrates for human TrxR. The Trx system could act as a cofactor for iodothyronine deiodinase by reducing the selenenyl iodide intermediate in the second-half of the deiodinase catalytic cycle to regenerate the active site. The TrxR-catalysed reduction of 1 was not inhibited by the anti-thyroid drug, PTU, suggesting that the involvement of the Trx system in the deiodinase cycle may be responsible for the insensitivity of certain deiodinases towards clinically useful thiourea drugs.     

Intercalation of gaseous thiols and sulfides into Ag+ ion-exchanged aluminum dihydrogen triphosphate

Ag(+) ion-exchanged layered aluminum dihydrogen triphosphate (AlP) with the interlayer distance of 0.85 nm was synthesized by the ion-exchange of proton in triphosphate with Ag(+) ion. The amount of exchanged Ag(+) ion depended on the concentration of AgNO(3) aqueous solution. Ag(+) ion-exchanged AlP adsorbed gaseous thiols and sulfides into the interlayer region. The adsorption amounts of thiols were more than those of sulfides, thiols with one mercapto group > thiol with two mercapto groups > sulfides, and depended on the amount of exchanged Ag(+) ion in the interlayer region. The thiols with one mercapto group were intercalated to expand the interlayer distance of Ag(+) ion-exchanged AlP, whereas there was no expansion in the adsorption of sulfide. In the case of thiol with two mercapto groups, there was observed contraction of the interlayer distance through the bridging with Ag(+) ions of the upper and lower sides of the interlayer region.     

Anti-thyroid drugs and thyroid hormone synthesis: effect of methimazole derivatives on peroxidase-catalyzed reactions

Syntheses and characterization of the selenium analogue (MSeI) of anti-thyroid drug methimazole and a series of organoselenium compounds bearing N-methylimidazole pharmacophore are described. In contrast to the sulfur compound that exists predominantly in its thione form, the selenium analogue exists in a selenol form, which spontaneously oxidizes in air to produce the corresponding diselenide. The reduction of the diselenide by GSH or NaBH(4) affords the biologically active selenol, which effectively inhibits the lactoperoxidase (LPO) activity in vitro. The monoselenides having N-methylimidazole moiety are found to be much less active than the selenol, suggesting that the presence of a selenol moiety is important for the LPO inhibition. The kinetic and mechanistic studies reveal that MSeI inhibits the LPO activity by reducing the H(2)O(2), providing a novel method to reversibly inhibit the enzyme. Although MSeI strongly inhibits LPO, the enzyme's activity can be completely recovered by increasing the H(2)O(2) concentration. On the other hand, the inhibition by methimazole (MMI), the sulfur analogue, cannot be reversed by increasing the H(2)O(2) concentration, leading to a complete inactivation of the enzyme. The reversible inhibition of LPO by some of the selenium derivatives is correlated with their glutathione peroxidase (GPx) activity, and the high GPx activity of the selenium compounds as compared with their sulfur analogues suggests that the selenium derivatives may protect the thyroid gland from oxidative damage.     

Comparaison de l''action catalytique de thiols monofonctionnels et de certains thiols bifonctionnels (les mercaptoalcoyl-2 benzimidazoles) sur l''hydrolyse de l''acetate de p-nitrophenyle

Synthesis of bifunctional thiols (2-alkylmercaptobenzimidazoles) and kinetic studies of the catalysis of the hydrolysis of p-nitrophenylacetate by these compounds, and by seven thiols indicates high activity of the 2-mercaptomethylbenzimidazoles in their neutral form, interpreted as the result of nucleophilic catalysis by the thiol function in its neutral state combined with general basic catalysis by the heterocycle.     

Imination of Sulfides and Sulfoxides with Sulfonylimino‐λ3‐Bromane under Mild,Metal‐Free Conditions

Exposure of sulfides and sulfoxides to trifluoromethanesulfonylimino(aryl)‐λ³‐bromane in dichloromethane at 0 °C results in a facile transfer of the sulfonylimino group to sulfur atoms and affords N‐triflylsulfilimines and ‐sulfoximines in high yields under transition‐metal‐free conditions. Imination of (R)‐methyl p‐tolyl sulfoxide proceeded with predominant retention of configuration at the stereogenic sulfur center. The Hammett plot afforded ρ values of ?0.58 for para‐substituted thioanisoles and ?0.49 for their equivalent sulfoxides, which suggests a buildup of positive charge on the sulfur atoms of sulfides and sulfoxides in the transition state. Calculations suggest a bimolecular nucleophilic‐substitution mechanism on the negatively charged nitrogen atom of the sulfonylimino‐λ³‐bromane, which involves the attack of a sulfide from the opposite side to bromine(III).