磺化金属萘酞菁聚集倾向的光谱研究

在磺化金属萘酞菁的荧光光谱和电子吸收光谱的Q谱带上观察到激基缔合物的荧光光谱峰和基态聚集物的吸收光谱峰。荧光光谱和吸收光谱实验说明 ,溶液中聚体分子和单体分子同时存在 ;聚体放出或吸收光子后都解离为单体 ;在荧光光谱中金属萘酞菁的激基缔合物荧光峰相对于单体荧光峰发生红移 ,在吸收光谱中金属萘酞菁基态聚集体的吸收峰相对于单体吸收峰发生蓝移 ,聚集体的荧光光谱和吸收光谱有镜像对称关系。磺化萘酞菁钴浓度较大时 ,其荧光光谱的猝灭较大。     

酞菁氯镓复合凝胶玻璃的谱学性能研究

采用溶胶-凝胶(Sol-Gel)湿化学工艺将酞菁氯镓(GaPcCl)掺入二氧化硅(SiO₂)凝胶玻璃基质,制备出均匀掺杂的GaPcCl复合凝胶玻璃,并对复合体系的红外光谱(IR)、紫外-可见吸收光谱(UV-Vis)及荧光光谱等谱学性能进行了测试。结果表明：GaPcCl的掺杂对凝胶玻璃基质的红外光谱没有产生显著影响;掺杂GaPcCl在复合体系中二聚体吸收峰的强度较其DMF溶液有所增大;掺杂GaPcCl在复合体系中荧光强度随浓度的增加远大于DMF溶液。     

三价铕荧光络合物与聚乙烯吡咯烷酮复合物研究

为研究稀土荧光络合物与高分子形成的复合物的结构与发光性能间的关系,利用α-噻吩甲酰三氟丙酮（TTA）和三苯基氧化膦（TPPO）与氯化铕（EuCl₃）分别制备了Eu(TTA)₃·2H₂O和Eu(TTA)₃·(TPPO)₂络合物,及其与聚乙烯吡咯烷酮（PVP）的复合物。采用荧光光谱,红外光谱和透射电镜等方法对复合物进行了表征。荧光光谱测定结果表明Eu(TTA)₃·2H₂O与PVP K30结构单元摩尔比为1∶35的PVP/Eu(TTA)₃·2H₂O复合物的612　nm发射峰的荧光强度较Eu(TTA)₃·2H₂O络合物有显著提高。红外光谱研究表明络合物的Eu3+与PVP分子的羰基之间存在着明显的配位作用,并且存在多种配位方式。透射电镜观察结果表明复合物具有微相分离结构,其中的稀土络合物为无定形结构,这进一步表明PVP与络合物分子间存在相互作用。     

七种牛肝菌的红外光谱鉴别

运用傅里叶变换红外光谱、二维相关谱及主成分分析对7种同属牛肝菌进行分析鉴别。结果显示：7种牛肝菌的原始光谱总体特征相似,主要由蛋白质、多糖等的吸收峰组成,但在吸收峰强度、位置仍存在差异。对样品进行二维相关红外光谱分析,在二维相关红外光谱1 680～1 300 cm-1范围内,茶褐牛肝菌和双色牛肝菌出现了6个明显的自动峰;小美牛肝菌出现了5个明显的自动峰;灰褐牛肝菌和美柄牛肝菌出现4个明显自动峰;美味牛肝菌和铜色牛肝菌自动峰相对较少,只出现了3个明显的自动峰;而且自动峰和交叉峰的强度、位置也存在较大差异。同样在二维相关红外光谱1 150～920 cm-1范围内,不同牛肝菌的同步谱中自动峰和交叉峰的数量、强度和位置也不同。对光谱1 800～800 cm-1范围内的二阶导数进行主成分分析,所有样品均区分开,其分类正确率达100%。结果表明,傅里叶变换红外光谱结合二维相关红外光谱或者主成分分析可以有效地区分茶褐牛肝菌、小美牛肝菌、双色牛肝菌、灰褐牛肝菌、美柄牛肝菌、美味牛肝菌和铜色牛肝菌。该方法对于分类鉴别蘑菇是一种快速、准确、有效的方法。     

氢键诱导液晶的DSC和变温红外光谱研究

制备了两个分别基于4,4’-联吡啶(BPy)和丙基反式环己基苯甲酸(PCBA)以及BPy和丙基反式双环己基甲酸(PCCA)的氢键液晶复合物(PCBA-BPy和PCCA-BPy),结合使用偏光显微镜(POM),用差示扫描量热(DSC)和变温傅里叶变换红外光谱对它们的中间相性能和分子间氢键的热稳定性进行了表征。结果表明,这两个氢键复合物都具有由于分子间氢键作用而导致的近晶相,但它们中存在的氢键作用却不相同,在PCBA-BPy中,温度变化时,发生氢键结合的羰基的吸收峰的位置仅在发生晶型转变时有突变,而在PCCA-BPy中,温度变化时,其羰基的吸收峰的位置则基本不发生突变。另外,当温度高于它们的清亮点时,这两个氢键液晶复合物的分子间氢键都发生部分分解。     

PVP对Nylon 6形貌及结晶行为影响的研究

采用变温红外光谱、示差扫描量热（DSC）和偏光显微镜（POM）等方法研究了聚乙烯吡咯烷酮（PVP）与尼龙6（nylon 6）分子间的相互作用及其对nylon 6热行为及结晶形貌的影响。DSC结果表明PVP的加入明显影响了nylon 6的熔融和结晶行为：随着PVP含量增加,PVP/nylon 6共混物的结晶温度、熔融温度及结晶度均逐渐降低;POM观察显示：随着PVP含量增多,nylon 6的球晶尺寸变小、球晶逐渐变得不完善。变温红外光谱结果表明,无定形PVP分子的羰基能够与nylon 6分子的N—H基团形成新的氢键,部分破坏了nylon 6分子之间的氢键结构,从而阻碍了nylon 6分子的规整排列,使其结晶度降低并导致nylon 6结晶形貌的变化。     

原儿茶酸和藜芦酸与生物大分子相互作用的光谱学研究

原儿茶酸(P)和藜芦酸(V)属于酚酸类化合物, 具有广泛的生理和药理活性。应用荧光光谱,紫外光谱等方法研究了P和V与鱼精DNA(fsDNA)的相互作用机理。紫外光谱显示P和V在190～230 nm(K吸收带)、230～270 nm(B吸收带)和270～310 nm(R吸收带)有3个较强的吸收带。在280 nm激发光波长时,位于338和334 nm处有强的荧光发射峰,其荧光发射峰在与fsDNA结合后发生明显的猝灭现象。P和V的stern-volmer猝灭速率常数分别1.03×1012和0.61×1012 L·mol-1·s-1,为静态猝灭机理。药物与DNA之间形成了复合物,结合常数分别为K_fsDNA/P=6.22×106 L·mol-1、K_fsDNA/V=1.57×104 L·mol-1。研究表明,V与DNA之间的结合比为1∶1,而P可以与DNA分子中的两个碱基发生结合,这与P分子中的两个酚羟基有关。P和V的结构对它们与DNA的结合方式有较大的影响。     

常见野生蘑菇的红外光谱及其二维相关红外光谱的鉴别

采用傅里叶变换红外光谱结合相关性分析、二阶导数谱和二维相关谱对13种常见野生蘑菇进行鉴别研究。结果显示13种野生蘑菇的红外光谱光谱特征相似,主要由蛋白质、多糖的吸收组成,13种样品的相关系数最小为0.779,最大值为0.960。在1 700~1 400和1 400~800 cm-1范围的二阶导数光谱中,各样品吸收峰的强度、位置和形状均有明显差异。二维相关红外光谱在1 380~1 680 cm-1范围的强自动峰整体相近,但自动峰和交叉峰位置、形状存在差异;在920~1 230 cm-1的范围,各样品的自动峰和交叉峰的数量、强度和位置差异明显。结果表明傅里叶变换红外光谱结合相关性分析、二阶导数谱和二维相关谱有望发展为区分不同种类蘑菇的快速方法。     

β-D-吡喃半乳糖的太赫兹光谱研究

为深入了解β-D-吡喃半乳糖在太赫兹波段的光谱特性, 利用太赫兹时域光谱技术测量了室温下β-D-吡喃半乳糖晶体在0.3～3.0 THz范围内的吸收谱及折射率谱, 同时利用傅里叶变换红外光谱技术获得了半乳糖在1.5～19.5 THz之间的吸收谱。实验研究的同时, 运用密度泛函理论和6-311+G**基组计算了气态孤立β-D-吡喃半乳糖分子的结构及其在太赫兹波段的振动频率, 并据此对实验光谱吸收峰进行了指认。研究结果表明, 除了因为分子间效应而导致的少许偏移外, 理论计算结果与实验数据吻合得很好; 实验光谱在6 THz以上频段的共振吸收峰来源于明确的分子内振动模式, 而6 THz以下低频段的共振吸收峰则主要来源于分子间氢键或晶体的声子模式。实验和理论研究的对比表明物质的远红外吸收特征对于分子的结构和空间排列非常敏感。     

滇丹参与丹参的傅里叶变换红外光谱对比研究

本文采用傅里叶变换红外光谱方法(FTIR)对中药材滇丹参和丹参及中成药复方丹参片进行了对比研究,比较了它们的红外光谱的异同.研究表明,滇丹参和丹参的红外光谱的部分吸收峰各峰之间构成相互对应关系,表明滇丹参与丹参所含的主要化学成分相似;滇丹参与丹参的红外光谱在1263、1062、668～541 cm-1三处峰形存在明显的...     

三乙烯四胺基双(二硫代甲酸钠)及其重金属配合物的光谱研究

采用红外光谱、紫外光谱、原子吸收光谱及元素分析研究了三乙烯四胺基双(二硫代甲酸钠)(DTC-TETA)的结构及其重金属配合物的配位行为。在DTC-TETA的红外光谱图中,在1 461～1 388 cm-1处和1 174～996 cm-1处分别出现含有部分双键性质的CN键和CS键的特征吸收峰;在紫外光谱图中,分别在265和290 nm处出现两个最大吸收峰,分别对应于N…C…S基团的π—π*跃迁和S…C…S基团中硫原子上非键电子向共轭体系的n—π*跃迁;元素分析结果表明该化合物中碳、氢、氮、硫的摩尔比近似为2∶4∶1∶1。在Cu(Ⅱ), Cd(Ⅱ), Zn(Ⅱ), Ni(Ⅱ)配合物的紫外光谱图中分别在紫外区的321, 310, 311, 325 nm处出现新的最大吸收峰。流动注射与火焰原子吸收联用分析结果表明DTC-TETA对铜、镉、镍、锌等重金属离子的络合能力强于二乙基二硫代氨基甲酸钠(DDTC)。     

Chemorheological studies on a thermoset PU/clay nanocomposite system

Chemorheology of neat polyurethane (PU) system, composed of a diisocyanate and a polyol, and a PU/clay nanocomposite system with an organoclay 5 phr was investigated. Differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) were used to study the polymerization behavior of both systems. The PU/clay nanocomposite system showed a faster polymerization rate than neat PU system. The rheological property change during isothermal and dynamic polymerization of both systems was measured using a rheometer to analyze chemorheology of them. A viscosity function that can describe viscosity change of a thermoset resin system during polymerization was adopted to analyze the viscosity data obtained from the rheometer. The PU/clay nanocomposite system had shorter gelation time than neat PU system. Structural analyses of the PU/clay nanocomposite were performed by X-ray diffractometer (XRD) and transmission electronic microscope (TEM).     

β-环糊精-双二茂铁基烯酮包合物的特征及微环境效应研究

采用固相研磨法首次制备了β-CD-双二茂铁基烯酮(DFE)超分子包合物。 运用等摩尔连续变化法证明两者形成了摩尔比为2∶3(DFE∶β-CD)的包合物,并且求得包合平衡常数K为1.48×1015 (L4·mol-4)。 通过多种谱学方法对包合物进行了表征。 同时,从微环境的角度比较研究了不同溶剂对DFE包合前后的UV光谱的影响以及不同pH值对DFE和包合物的影响特征。 结果表明溶液中微环境的不同对客体及超分子包合物的电子光谱有着显著而不同的影响。     

胺化葡萄糖及其铜配合物的光谱特性

研究了胺化D-葡萄糖的FTIR,1H-NMR特性及其与Cu(Ⅱ)形成配合物的UV光谱。在FTIR谱中,与D-葡萄糖相比,在1 629～1 608 cm-1出现δ_NH吸收峰,说明D-葡萄糖与乙二胺发生了反应;在1H-NMR谱中,在δ4.82～4.79的化学位移分别对应于葡萄糖C₁上的质子及与C₁直接相连的乙二胺的氨基上的质子,表明反应时乙二胺取代了葡萄糖C₁上的羟基,形成了胺化葡萄糖;在UV谱中,胺化葡萄糖在紫外光区并没有明显吸收,但与Cu(Ⅱ)形成配合物后,在236 nm附近出现最大吸收峰。在胺化葡萄糖-Cu(Ⅱ)配合物中,Cu2+与胺化葡萄糖的络合比接近于1∶1,该配合物稳定常数6.8×107 L·mol-1。     

Toughening of Poly (Butylene Terephthalate) with Epoxy-Filled Poly (Ethylene–Octene) Copolymer

Toughened poly (butylene terephthalate) (PBT) with triglycidyl isocyanurate (TGIC)-filled poly (ethylene–octene) (POE) was prepared by melt reaction extrusion. For retarding the reaction extent between PBT and the epoxy component, the TGIC was first blended with POE to enwrap its reactive epoxy groups. Then, the TGIC-filled POE was used to melt blend with PBT. The Fourier transform infrared (FTIR) spectra showed that no other peaks appeared in the POE/TGIC specimens except for those originally existing in pure POE and TGIC. The rheological results further confirmed that no reaction occurred between the epoxy and the POE matrix. When the POE/TGIC was blended with PBT, a distinct increase of the viscosity suggested that the migration of the TGIC from POE to PBT during the melt processing induced chain extension reactions of PBT. The results obtained from DSC and DMA revealed that the chain extension of PBT induced by the reaction with TGIC restricted the mobility of PBT chains leading to a limitation of the recrystallization-remelting process and an increase of the glass transition temperature of PBT. The mechanical tests showed that the presence of TGIC in the POE phase distinctly improved the toughness of PBT. Compared to the case of a PBT/POE (80/20, wt%/wt%) blend, the elongation at break and impact strength of the system filled with 5 phr TGIC were increased more than three and six times, respectively.     

Preparation and Characterization of Composites Based on Poly (Butylene Succinate) and Poly (Lactic Acid) Grafted Tetracalcium Phosphate

Tetracalcium phosphate (TTCP, Ca₄(PO₄)₂O) was functionalized by poly (l-lactic acid) (PLLA) in order to improve the dispersion of TTCP particles in poly (butylene succinate) (PBS) matrices, and then a series of the PLLA grafted TTCP/PBS (g-TTCP/PBS) composites were prepared via melt processing. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), tensile analysis, differential scanning calorimetry (DSC), thermogravimetric analysis (DTG/TGA) and melt rheological analysis were used to investigate the structure and properties of the g-TTCP/PBS composites. The results revealed that l-lactide could be grafted onto the surface of TTCP, and the g-TTCP/PBS composites showed the best mechanical properties when the content of g-TTCP was 10 wt%. The crystallization temperature of g-TTCP/PBS composites tended to increase with the increase of g-TTCP contents. The functionalized particles played an important role in augmenting the thermal degradation rate and the complex viscosity of the composites due to their unique structure and the reasonable interfacial interaction between the particles and PBS matrix.     

低聚壳聚糖稀土铈(Ⅲ)配合物的合成与光谱表征

以低聚壳聚糖(L-CTS)为配位体,稀土铈(Ⅲ)为配位离子,在pH值1～2的酸性条件下制备了低聚壳聚糖稀土铈(Ⅲ)配合物(L-CTS-Ce),用紫外光谱、荧光光谱、红外光谱、核磁共振谱等手段对其结构进行了表征,并对配位机理进行了初步探讨。 结果表明,L-CTS与Ce(Ⅲ)发生配位作用的基团主要是羟基而不是氨基。     

Synthesis and Characterization of Poly(vinyl pyrrolidone)/Reduced Graphene Oxide Nanocomposite

Poly(vinyl pyrrolidone) (PVP)/reduced graphene oxide (RGO) nanocomposites were synthesized by reducing graphene oxide in the polymer matrix at different temperatures. The effects of the GO content on the properties of the nanocomposites were investigated by Fourier-transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA). The degree of dispersion of GO in the PVP matrix was examined by field-emission scanning electron microscopy. The results showed that both GO and RGO were well dispersed in the PVP matrix. Under low filler content, the improvement of onset decomposition temperatures of PVP nanocomposites was not obviously observed, but the amounts of residual char of the PVP nanocomposites were clearly increased. In addition, the decomposition temperature peak values of the PVP nanocomposites were increased, while the peak was broadened.     

Poly(butylene terephthalate) Toughening with Butadiene-Epoxy-Functionalized Methyl Methacrylate Core–Shell Copolymer

Butadiene glycidyl methacrylate-functionalized-methyl methacrylate (PB-g-MG) core–shell copolymer was used to toughen poly(butylene terephthalate) (PBT). Fourier transform infrared (FTIR) spectra and torque tests showed that compatibilization reactions took place between the carboxyl and/or hydroxyl groups of PBT and the epoxy groups of PB-g-MG. Phase morphology results showed that the PB-g-MG core–shell particles dispersed in the PBT matrix uniformly. The addition of PB-g-MG significantly improved the mechanical properties of PBT. The elongation at break and the impact strength increased with the increase of PB-g-MG content. SEM results showed that the shear yielding properties of the PBT matrix was the main toughening mechanism. The relationship between complex viscosity and angular frequency of the PBT/PB-g-MG blends indicated that the melt viscosity was higher than that of pure PBT.     

聚乙烯吡咯烷酮与苯磺酸铕相互作用研究

用变温红外光谱法和荧光光谱法研究了聚乙烯吡咯烷酮与苯磺酸铕的相互作用。聚乙烯吡咯烷酮的酰胺基团可与苯磺酸铕中的铕离子发生络合配位作用,导致聚乙烯吡咯烷酮的酰胺Ⅰ带发生红移。这种络合配位作用,使原本不溶于氯仿的苯磺酸铕可溶于含聚乙烯吡咯烷酮的氯仿溶液。在苯磺酸铕固体的发射光谱中,只能观察到铕离子的f—f跃迁特征发射峰,而在苯磺酸铕浓水溶液的荧光光谱中,亦可观测到苯磺酸根的π*→π跃迁峰,说明苯磺酸铕在水溶液中存在解络合现象。苯磺酸铕在溶液中的解络合行为使铕离子周围的可配位空间增大,这为PVP的酰胺基团与铕离子发生络合配位作用创造了条件。