Surface chemical functionalization of cylindrical nanopores derived from a polystyrene-poly(methylmethacrylate) diblock copolymer via amidation

This paper demonstrated covalent functionalization of surface -COOH groups on cylindrical nanopores derived from a polystyrene-poly(methylmethacrylate) diblock copolymer (PS- b-PMMA) via amidation mediated by 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC). The surface functionalization led to conversion of the surface charge of the nanopores and also to the shrinkage of effective pore radius, as verified using cyclic voltammetry for PS- b-PMMA-derived nanoporous films immobilized on gold substrates. For native PS- b-PMMA-derived nanoporous films, the redox current of anionic Fe(CN) 6 (3-) decreased with increasing solution pH due to the deprotonation of the surface -COOH groups, whereas those of cationic Ru(NH 3) 6 3+ and uncharged 1,1'-ferrocenedimethanol (Fc(CH 2OH) 2) were similar regardless of pH. In contrast, upon EDC-mediated amidation of the nanopore surface with ethylenediamine, the redox current of Ru(NH 3) 6 3+ decreased with decreasing pH and those of Fe(CN) 6 (3-) and Fc(CH 2OH) 2 were independent of pH. The decrease in redox current of Ru(NH 3) 6 3+ at acidic pH was consistent with the presence of -NH 2 groups on the nanopore surface as a result of the covalent immobilization of ethylenediamine. Furthermore, the redox current of Fc(CH 2OH) 2 decreased upon amidation of the nanopores with tetraethyleneglycol monoamine ((PEO) 4NH 2), reflecting the shrinkage of the effective pore radius. The control of the surface charge and effective radius of the nanopores via EDC-mediated amidation will provide a simple means for controlling the selectivity of molecular mass transport through PS- b-PMMA-derived nanopores.     

Electrochemical impedance spectroscopy studies of organic-solvent-induced permeability changes in nanoporous films derived from a cylinder-forming diblock copolymer

In this paper we report electrochemical investigations of the influence of organic solvents dissolved in aqueous solution on the permeability of nanoporous films derived from a cylinder-forming polystyrene-poly(methyl methacrylate) diblock copolymer (CF-PS-b-PMMA). The nanoporous films (ca. 30 nm in pore diameter) were prepared on planar gold electrodes via UV-based degradation of the cylindrical PMMA domains of annealed CF-PS-b-PMMA films (30-45 nm thick). The permeability of the electrode-supported nanoporous films was assessed using cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The faradic current of Fe(CN)(6)(3-/4-) decreased upon immersion in aqueous solutions saturated with toluene or methylene chloride (5.8 mM and 0.20 M, respectively). EIS data indicated that the decrease in faradic current mainly reflected an increase in the pore resistance (R(pore)). In contrast, R(pore) did not change in a saturated n-heptane solution, 0.17 M ethanol, or 5.8 mM aqueous solutions of methylene chloride, diethyl ether, methyl ethyl ketone, or ethanol. Atomic force microscopy images of a nanoporous film in aqueous solution with and without 5.8 mM toluene showed a reversible change in the surface morphology, which was consistent with a toluene-induced change in R(pore). The solvent-induced increase in R(pore) was attributed to the swelling of the nanoporous films by the organic solvents, which decreased the effective pore diameter. The reversible permeability changes suggest that the surface of CF-PS-b-PMMA-derived nanoporous films can be functionalized in organic environments without destroying the nanoporous structure. In addition, the solvent-induced swelling may provide a simple means for controlling the permeability of such nanoporous films.     

Adsorption of polystyrene-poly(4-vinylpyridine) diblock copolymer on the assembled latex film

The Layer-by-Layer (LbL) technique was effectively used to embed anionic polystyrene (PS) latex particles into the assembled film deposited on a glass substrate. The high surface coverage of particles on poly(ethyleneimine) (PEI)-coated glass, determined from scanning electron microscopy (SEM) (80%), was attained within 1 h when using the latex containing sodium chloride (5 × 10⁻⁵ mol/l) at pH 6. After immersing the particles coated substrate in the polystyrene-poly(4-vinylpyridine) diblock copolymer (PS-PVPy) dissolved in tetrahydrofuran, the contact angle value indicated that the PS-PVPy could be adsorbed on the film to provide PS block at the outermost layer. The selective solvent, block length of PVPy, latex concentration, immersion time and ionic strength of aqueous solution of poly(allylamine hydrochloride) (PAH) previously adsorbed on the substrate showed influence on the adsorption of the block copolymer and, hence, the contact angle of the film.     

Chemical imaging of the surface of self-assembled polystyrene-b-poly(methyl methacrylate) diblock copolymer films using apertureless near-field IR microscopy

The nanoscale chemical composition variations of the surfaces of thin films of polystyrene- b-poly(methyl methacrylate) (PS- b-PMMA) diblock copolymers are investigated using apertureless near-field IR microscopy. The scattering of the incident infrared beam from a modulated atomic force microscopy (AFM) tip is probed using homodyne detection and demodulation at the tip oscillation frequency. An increase in the IR attenuation is observed in the PMMA-rich domains with a wavenumber dependence that is consistent with the bulk absorption spectrum. The results indicate that even though a small topography-induced artifact can be observed in the near-field images, the chemical signature of the sample is detected clearly.     

Fabrication of metallized nanoporous films from the self-assembly of a block copolymer and homopolymer mixture

Inorganic compound HAuCl4, which can form a complex with pyridine, is introduced into a poly(styrene-block-2-vinylpyridine) (PS-b-P2VP) block copolymer/poly(methyl methacrylate) (PMMA) homopolymer mixture. The orientation of the cylindrical microdomains formed by the P2VP block, PMMA, and HAuCl4 normal to the substrate surface can be generated via cooperative self-assembly of the mixture. Selective removal of the homopolymer can lead to porous nanostructures containing metal components in P2VP domains, which have a novel photoluminescence property.     

Dynamic properties of poly(styrene)-poly(ethylene oxide) diblock copolymer films at the air-water interface

The complex dynamic elasticity of monolayers of the diblock copolymer poly(styrene)-poly(ethylene oxide) at the air-water interface in the pancake, quasi-brush, and brush regimes has been studied by means of three experimental techniques--the surface transverse and longitudinal waves and the oscillating barrier method. In the pancake regime the surface viscoelastic properties in the frequency range under investigation (0.01-520 Hz) prove to be indistinguishable from the surface properties of the homopolymer PEO. Transition to the quasi-brush regime is accompanied by rather abrupt changes in both components of the surface viscoelasticity. The surface viscosity in the brush regime exceeds significantly the results calculated from the theory of D. M. A. Buzza et al. (J. Chem. Phys.109, 5008 (1998)), which takes into account the dissipation arising from the flow of solvent through the brush phase. Possible reasons of this discrepancy are discussed.     

Developing a coarse-grained force field for the diblock copolymer poly(styrene-b-butadiene) from atomistic simulation

We have developed a coarse-grained force field for the poly(styrene-b-butadiene) diblock copolymer. We describe the computational methods and discuss how they were applied to develop a coarse-grained force field for this diblock copolymer from the atomistic simulation. The new force field contains three different bonds, four angles, five dihedral angles, and three nonbonded terms. We successfully tested this coarse-grained model against the chain properties, including static and dynamic properties, derived from the atomistic simulation; the results suggest that the coarse-grained force field is an effective model.     

Formation of nanoporous poly(aryl amide ether) (PAAE) films by selective removal of poly(ethylene glycol) (PEG) from PEG/PAAE composite films

Poly(aryl amide ether) (PAAE) thin films with nanometer-sized pores have been prepared in two steps: (1) solution casting of partially miscible poly(ethylene glycol) (PEG)/PAAE blends from one of their common solvents, dimethyl sulfoxide (DMSO), results in formation of PEG/PAAE nanocomposite films; (2) selective removal of PEG component by water washing yields nanosized, porous PAAE films. The pores have been found to have a small size variation and cover the whole surface homogeneously. With an increase in PEG contents, the sizes of the pores increase but the size distributions do not have much changes. This has been ascribed to formation of small PEG domains in PEG/PAAE composite films, which is facilitated by the strong interactions, mostly hydrogen bonds, between PEG and PAAE macromolecular chains.     

Electrochemical synthesis and surface characterization of poly(3,4-ethylenedioxythiophene) films grown in an ionic liquid

We report a facile method to synthesize poly(3,4-ethylenedioxythiophene) (PEDOT) films at room temperature in a waterproof ionic liquid, 1-ethyl-3-methylimidazolium bis(perfluoroethylsulfonyl)imide (EMIPFSI), by electropolymerization. The ionic liquid leads to the formation of randomly oriented nanofibers and particles confined to submicrometer-sized domains in the film microstructure. X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray (EDX) studies provide information about the intercalation of the cation apart from the reported anion in the polymer film, and on how the imidazolium ion controls the growth of PEDOT nanostructures.     

On the stability of (highly aggregated) polyelectrolyte complexes containing a charged-block-neutral diblock copolymer

Using light scattering and cryogenic transmission electron microscopy, we show that highly aggregated polyelectrolyte complexes (HAPECs) composed of poly([4-(2-aminoethylthio)butylene] hydrochloride)49-block-poly(ethylene oxide)212 and poly(acrylic acid) (PAA) of varying lengths (140, 160, and 2000 monomeric units) are metastable or unstable if the method of preparation is direct mixing of two solutions containing the oppositely charged components. The stability of the resulting HAPECs decreases with decreasing neutral-block content and with increasing deviation from 1:1 mixing (expressed in number of chargeable groups) of the oppositely charged polyelectrolytes, most probably for electrostatic reasons. The difference between the metastable and stable states, obtained with pH titrations, increases with increasing PAA length and increasing pH mismatch between the two solutions with the oppositely charged components.     

Formation of reversible shell cross-linked micelles from the biodegradable amphiphilic diblock copolymer poly(L-cysteine)-block-poly(L-lactide)

A novel biodegradable diblock copolymer, poly(L-cysteine)-b-poly(L-lactide) (PLC-b-PLLA), was synthesized by ring-opening polymerization (ROP) of N-carboxyanhydride of beta-benzyloxycarbonyl-L-cysteine (ZLC-NCA) with amino-terminated poly(L-lactide) (NH 2-PLLA) as a macroinitiator in a convenient way. The diblock copolymer and its precursor were characterized by (1)H NMR, Fourier transform infrared (FT-IR), gel permeation chromatography (GPC), and X-ray photoelectron spectroscopy (XPS) measurements. The length of each block polymer could be tailored by molecular design and the ratios of feeding monomers. The cell adhesion and cell spread on the PZLC-b-PLLA and PLC-b-PLLA films were enhanced compared to those on pure PLA film. PLC-b-PLLA can self-assemble to form micelles in aqueous media. A pyrene probe is used to demonstrate the micelle formation of PLC-b-PLLA in aqueous solution. Due to the ease of disulfide exchange with thiols, the obtained micelles are reversible shell cross-linked (SCL) micelles. The morphology and size of the micelles are studied by dynamic light scattering (DLS) and environmental scanning electron microscopy (ESEM).     

Quantitative determination of the surface composition of acrylate copolymer latex films by XPS (ESCA)

The interaction of copolymer latex particles with emulsifiers is governed to a great extent by the monomer composition of the particle surface. In this article it is demonstrated that for methylmethacrylate butylacrylate copolymer latexes this quantity, within certain limits, may be determined by XPS (ESCA) by a detailed analysis of the C(1s) line. It is shown that in this analysis secondary shifts in binding energy caused by the two carboxyl-oxygen atoms have to be taken into account, a fact that has been neglected in the literature so far.     

Optical and surface morphological properties of polarizing films fabricated from a chromonic dye by the photoalignment technique

The inherent chromonic lyotropic liquid crystalline properties of a dye have been manipulated to fabricate multi-axial micropolarizing thin films by means of the photoalignment technique. The dye aqueous solution is deposited on a photopatterned polymer film to result in the macroscopic alignment of the dye molecules, followed by drying at ambient temperature. The solid polarizing dye layers thus produced exhibit very a high contrast ratio and degree of polarization in the region of visible light. Addition of a small amount of surfactant to the dye solution is a prerequisite for the generation of a nematic chromonic phase and for the formation of homogeneous thin dye layers on the polymer film. The correlation between the optical and surface morphological properties of the dye layers is discussed.     

A modification of the surface of the thin membranes of EVAL (ethylene vinylalcohol copolymer) by Langmuir-Blodgett films

The surface modification of the membrane as an artificial kidney made of two kinds of ethylene-vinylalcohol copolymers with 32 and 44 mol % contents of ethylene group (EVAL) have been studied by depositing the polymer monolayer on the membrane surface using the Langmuir-Blodgett technique.The permeability to PSS (physiological salt solution) and albumin rejection of the membranes were measured against the number of multilayers. The UFR (ultrafiltration rate) of PSS containing albumin decreased with the increase of the built up layers up to 2 layers and showed constant values from 3 to 10 layers of LB films.On the other hand, albumin rejection increased with the increase of built up layers. Albumin rejection for these deposited membranes of multilayer of EVAL-32 showed 21 times effectiveness more than that of ordinary membrane and 16 times for EVAL-44.Modification of the membrane has been performed by such a network structure formed by the built-up films.     

Synthesis and surface characterization of a new multiblock copolymer based on poly(dimethylsiloxane) and aromatic polysulfone

A new alternating block copolymer was synthesized from dihydroxy-terminated poly-(ether ketone sulfone) and bis(dimethylamino)-terminated polydimethylsiloxane oligomers. The chemistry and the thermal properties are discussed. Surface chemical composition of films was analyzed by ESCA. Quantitative calculations showed a noticeable siloxane enrichment at the surface.     

Polystyrene-poly(ethylene oxide) diblock copolymer: the effect of polystyrene and spreading concentration at the air/water interface

Polystyrene-block-poly(ethylene oxide) (PS-PEO) is an amphiphilic diblock copolymer that undergoes microphase separation when spread at the air/water interface, forming nanosized domains. In this study, we investigate the impact of PS by examining a series of PS-PEO samples containing constant PEO (~17,000 g·mol(-1)) and variable PS (from 3600 to 200,000 g·mol(-1)) through isothermal characterization and atomic force microscopy (AFM). The polymers separated into two categories: predominantly hydrophobic and predominantly hydrophilic with a weight percent of PEO of ~20% providing the boundary between the two. AFM results indicated that predominantly hydrophilic PS-PEO forms dots while more hydrophobic samples yield a mixture of dots and spaghetti with continent-like structures appearing at ~7% PEO or less. These structures reflect a blend of polymer spreading, entanglement, and vitrification as the solvent evaporates. Changing the spreading concentration provides insight into this process with higher concentrations representing earlier kinetic stages and lower concentrations demonstrating later ones. Comparison of isothermal results and AFM analysis shows how polymer behavior at the air/water interface correlates with the observed nanostructures. Understanding the impact of polymer composition and spreading concentration is significant in leading to greater control over the nanostructures obtained through PS-PEO self-assembly and their eventual application as polymer templates.     

Synthesis and characterization of a novel copolymer of glyoxal dihydrazone and glyoxal dihydrazone bis(dithiocarbamate) and application in heavy metal ion removal from water

We demonstrate synthesis of water insoluble, novel copolymer P_A1 from condensation of glyoxal dihydrazone and glyoxal dihydrazone bis(dithiocarbamate) monomers having high capacity to remove metal ions from aqueous solution. The presence of a high atomic percentage of nitrogen and sulfur atoms in P_A1 leads to strong ligating ability with metal ions. The monomers and the polymer have been characterized by FTIR, UV–Visible spectroscopy, CHNS elemental analysis, NMR, MALDI-MS, and TG/DTA. As a proof of concept, the P_A1 is tested for its ability to remove heavy metal ions Cu²⁺, Co²⁺, Fe²⁺, Ni²⁺, Mn²⁺, and CrO ₇ ^2? from aqueous solutions. P_A1 efficiently removed metals ions from the metal solutions. The highest absorption ability has been observed toward the iron salts where 0.969 g metal salt is absorbed by 1 g polymer. This study has implication for inexpensive and efficient polymer for purification of water.     

Effect of temperature on the interfacial behavior of a polystyrene-b-poly(methyl methacrylate) diblock copolymer at the air/water interface

Monolayers of a polystyrene-poly(methyl methacrylate) (PS-PMMA) diblock copolymer at the air-water interface were studied by measuring the surface pressure-area isotherms at several temperatures. Langmuir film balance experiments and atomic force microscopy showed that the diblock copolymer molecules formed surface micelles. In the plot of the surface pressure versus surface area per repeating unit, the monolayer changed from the gas phase to the liquid expanded phase at lower surface pressure for systems at low temperature compared to those at high temperature. In addition, a plateau, corresponding to the transition from the liquid expanded to liquid condensed phase, appeared in that plot at lower surface pressure for systems with a higher subphase (water) temperature. Hysteresis was observed in the compression-expansion cycle process. Increasing the subphase temperature alleviated this hyteresis gap, especially at low surface pressures. The minimum in the plot of the surface pressure versus surface area per repeating unit in the expansion process (which arises from the transition) and the transition plateau appeared more vividly at higher water temperature. These dynamic experimental results show that PS-PMMA diblock copolymers, in which both blocks are insoluble in water, do not form complicated entanglements in two-dimensional space. Although higher water temperature provided more entropy to the chains, and thus more conformational freedom, it did not change the surface morphology of the condensed film because both blocks of PS-PMMA are insoluble in water.     

Preparation and photopatterning of Langmuir–Blodgett (LB) films of a novel copolymer containing swallow‐tailed double naphthalene groups

A new series of copolymer poly(N‐hexadecylmethacrylamide‐co‐dinaphthalen‐2‐yl 2‐allylmalonate) poly(HDMA‐co‐DNAM)s containing swallow‐tailed double naphthyl groups and long alkyl group were designed and synthesized. The behavior of copolymer molecular arranging on water surface, patterning properties of copolymer LB films, and photochemical reactions in ultrathin film were investigated. The poly(HDMA‐co‐DNAM)s could form a stable, well‐defined molecular orientation Langmuir monolayer at air/water interface. The polymer main chain was lying flat on water surface and the side chains attached to the main chain stretching out at the angle of about 50°. The results obtained showed that a well‐ordered layer‐by‐layer structure was successfully controlled in LB films, in which most of naphthyl groups in poly(HDMA‐co‐DNAM)s LB films were in dimer and the copolymer LB films were decomposed hardly upon irradiation of deep UV light. We found that the exposed and unexposed regions of the poly(HDMA‐co‐DNAM)s copolymer LB films had solubility differentiation in gold etchant, which is a mixed solution of I₂/NH₄I/C₂H₅OH/H₂O. Therefore, we could obtain gold photopattern with the maximal resolution of the employed mask without any development process. Copyright © 2011 John Wiley & Sons, Ltd.