Solvent‐free ring‐opening polymerization of cyclohexene oxide catalyzed by palladium chloride

In this study, we have for the first time demonstrated that palladium chloride (PdCl₂) is an efficient catalyst for ring‐opening polymerization of cyclohexene oxide in a solvent‐free condition. The polymerization product was in atactic structure, and reaction conditions, such as reaction temperature, time, and catalyst amount, showed effects on polymerization conversion yield, turnover number, and number‐average molecular weight of the resulting poly(cyclohexene oxide). PdCl₂ catalysis follows a cationic ring‐opening mechanism. The polymerization result is highly determined by the chemical structure of the monomers.     

Magnesium Halide‐promoted Ring‐opening Reaction of Cyclic Ether in the Presence of Phosphine Halide

A new route to the direct preparation of H‐phosphinate esters has been explored. The ring‐opening reaction of cyclic ether (tetrahydrofuran or tetrahydropyrane) was carried out with magnesium halide in the presence of phosphine halide (PRCl₂ or PCl₃). The process is straightforward and all the reagents are relatively cheap and readily available. Magnesium halide‐mediated THF ring‐opening (S_N2@C) and the subsequent S_N2@P elementary reactions that giving rise to the intermediate of haloalkyl phosphinates have been discussed based on our experimental findings ( Path I : S_N2@C−+S_N2@P). Another possible route, the direct S_N2 between THF (nucleophile) and phosphine halide (electrophile) that followed by THF ring opening by halide dissociated from phosphine halide ( Path II: S_N2@P−+S_N2@C), was also proposed. However, path II is the least likely reaction path because neutral THF is not a good nucleophile. H‐phosphinate esters could be readily available in the subsequent hydrolysis process. Considering the ionic bond strength in magnesium halides and the nucleophilicity of halides dissociated from MgX₂ in protic solvents like water, MgBr₂ is recommended for ring‐opening reactions of cyclic ethers.     

Concise Synthesis of Open‐Cage Fullerenes for Oxygen Delivery

Open‐cage fullerenes with a 19‐membered orifice were prepared in three steps from C₆₀. The key step for cage‐opening is aniline mediated ring expansion of a fullerene‐mixed peroxide with a ketolactone moiety on the orifice. Release of ring strain on the spherical fullerene cage served as the main driving force for the efficient cage‐opening sequence. Encapsulation of oxygen could be achieved at room temperature under moderate pressure (50 atm) and the encapsulated oxygen could be released slowly under ambient conditions. The activation energy of the oxygen‐releasing process is 18.8 kcal mol^?1 and the half‐life at 37 °C was 73 min, which makes this open‐cage fullerene derivative a potential oxygen‐delivery material.     

[HCo(CO)4]‐Catalyzed Three‐component Cycloaddition of Epoxides,Imines, and Carbon Monoxide: Facile Construction of 1,3‐Oxazinan‐4‐ones

The three‐component [3+2+1] cycloaddition of epoxides, imines, and carbon monoxide to produce 1,3‐oxazinan‐4‐ones has been developed by using [HCo(CO)₄] as the catalyst. The reaction occurs for a wide variety of imines and epoxides, under 60 bar of CO pressure at 50 °C, to produce 1,3‐oxazinan‐4‐ones with different substitution patterns in high yields, and provides an efficient and atom‐economic route to heterocycles from simple and readily available starting materials. A plausible mechanism involves [HCo(CO)₄]‐induced ring‐opening of the epoxide, followed by sequential addition of carbon monoxide and the imine, and then ring closure to form the product accompanied by regeneration of [HCo(CO)₄].     

Cationic ring‐opening polymerization behavior of a five‐membered cyclic thiocarbonate having a spiro‐linked adamantane moiety

This work deals with the synthesis and cationic ring‐opening polymerization behavior of a novel five‐membered cyclic thiocarbonate bearing a spiro‐linked adamantane moiety, tricyclo[3.3.1.1^3,7]decane‐2‐spiro‐4′‐(1′,3′‐dioxolane‐2′‐thione) ( TC2 ). The cationic ring‐opening polymerization of TC2 did not proceed with trifluoromethanesulfonic acid, methyl trifluoromethanesulfonate, triethyloxonium tetrafluoroborate (Et₃OBF₄), boron trifluoride etherate (BF₃OEt₂), titanium tetrachloride, or methyl iodide as the initiator, presumably because of the steric hindrance of the adamantane moiety. However, the cationic ring‐opening copolymerization of TC2 with five‐ or six‐membered cyclic thiocarbonates, that is, 1,3‐dioxolane‐2‐thione, 1,3‐dioxane‐2‐thione, 5‐methyl‐1,3‐dioxane‐2‐thione, or 5,5‐dimethyl‐1,3‐dioxane‐2‐thione, initiated by BF₃OEt₂ or Et₃OBF₄, proceeded to afford the corresponding copolymer via a selective ring‐opening direction. The increase in the feed ratio of TC2 in the copolymerization increased the unit ratio derived from TC2 in the copolymer; however, the molecular weight of the copolymer decreased. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 699–707, 2003     

[HCo(CO)4]‐Catalyzed Three‐component Cycloaddition of Epoxides,Imines, and Carbon Monoxide: Facile Construction of 1,3‐Oxazinan‐4‐ones

The three‐component [3+2+1] cycloaddition of epoxides, imines, and carbon monoxide to produce 1,3‐oxazinan‐4‐ones has been developed by using [HCo(CO)₄] as the catalyst. The reaction occurs for a wide variety of imines and epoxides, under 60 bar of CO pressure at 50 °C, to produce 1,3‐oxazinan‐4‐ones with different substitution patterns in high yields, and provides an efficient and atom‐economic route to heterocycles from simple and readily available starting materials. A plausible mechanism involves [HCo(CO)₄]‐induced ring‐opening of the epoxide, followed by sequential addition of carbon monoxide and the imine, and then ring closure to form the product accompanied by regeneration of [HCo(CO)₄].     

Regioselective Ring‐Opening of Amino Acid‐Derived Chiral Aziridines: an Easy Access to cis‐2,5‐Disubstituted Chiral Piperazines

An efficient four‐step synthetic strategy for cis‐2,5‐disubstituted chiral piperazines derived from amino‐acid‐based aziridines is described. The key steps in this strategy are the highly regioselective boron trifluoride diethyl etherate (BF₃ ⋅ OEt₂)‐mediated ring‐opening of less‐reactive N‐Ts chiral aziridines by α‐amino acid methyl ester hydrochloride followed by Mitsunobu cyclization. This protocol has been used in an attempt to construct the piperazine core framework of natural product (+)‐piperazinomycin.     

Silica‐Bound 3‐{2‐[Poly(ethylene Glycol)]ethyl}‐Substituted 1‐Methyl‐1H‐imidazol‐3‐ium Bromide: A Recoverable Phase‐Transfer Catalyst for Smooth and Regioselective Conversion of Oxiranes to β‐Hydroxynitriles in Water

A series of β‐hydroxynitriles were efficiently synthesized from the regioselective ring opening of oxiranes by cyanide anion in the presence of silica‐bound 3‐{2‐[poly(ethylene glycol)]ethyl}‐substituted 1‐methyl‐1H‐imidazol‐3‐ium bromide (SiO₂? PEG? ImBr) as a novel recoverable phase‐transfer catalyst in H₂O (Scheme 1 and Table 2). The workup procedure was straightforward, and the catalyst could be reused over four times with almost no loss of catalytic activity and selectivity.     

Hydroxylation and Ring‐Opening Mechanism of an Unusual Flavoprotein Monooxygenase, 2‐Methyl‐3‐hydroxypyridine‐5‐carboxylic Acid Oxygenase: A Theoretical Study

Hybrid meta‐GGA density functional theory (the MPWB1K functional) was used to study the hydroxylation and ring‐opening mechanism of 2‐methyl‐3‐hydroxypyridine‐5‐carboxylic acid oxygenase (MHPCO). This enzyme catalyses the conversion of 2‐methyl‐3‐hydroxypyridine‐5‐carboxylic acid (MHPC) to α‐(N‐acetylaminomethylene)succinic acid (AAMS), which is the essential ring‐opening step in the bacterial degradation of vitamin B₆. MHPCO belongs to the flavin‐containing aromatic hydroxylases family. However, MHPCO is capable of catalysing a subsequent aromatic ring‐cleavage reaction to give acyclic products rather than hydroxylated aromatic ones. Our calculations show that the re‐aromatisation of the hydroxylated intermediate occurs spontaneously in aqueous solution; this implies that the ring‐opening process occurs inside the enzyme’s active site, in which limited water is available. The instability of the hydroxylated intermediate of MHPCO is the main reason why acyclic products are formed. Previously proposed mechanisms for the ring‐opening step were studied, and were shown to be less likely to occur (ΔΔG^≠298>35 kcal mol^?1). Two new pathways with reasonable barrier heights (ΔΔG^≠298<15 kcal mol^?1) are reported herein, which are in accordance with all experimental information present to date.     

Cationic polymerization of seven‐membered cyclic monothiocarbonate 1,3‐dioxepan‐2‐thione

The cationic ring‐opening polymerization of a seven‐membered cyclic monothiocarbonate, 1,3‐dioxepan‐2‐thione, produced a soluble polymer through the selective isomerization of thiocarbonyl to a carbonyl group {? [SC(C?O)O(CH₂)₄]_n? }. The molecular weights of the polymer could be controlled by the feed ratio of the monomer to the initiators or the conversion of the monomer during the polymerization, although some termination reactions occurred after the complete consumption of the monomer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1014–1018, 2005     

Ring Opening of N‐Sulfonyl Aziridines by Amines in Silica‐Water

Ring opening reactions of N‐sulfonyl aziridines by primary and secondary amines in silica gel (SG)‐water system were achieved, which provided a mild, practical and environmentally benign method to synthesize mono‐ and bis‐sulfonyl substituted amines. When primary and secondary amines were used in excess, they reacted with N‐sulfonyl aziridines smoothly at room temperature, mainly affording 1:1 ring opening products. Reactions of primary amines with 2 equiv. of aziridines produced 2:1 ring opening products. Some 1:1 products can be cyclized with CS₂ to synthesize N‐sulfonyl cyclothioureas also in water.     

Copper‐Catalysed Ring Opening of Polycyclic meso‐Hydrazines with Trialkylaluminium Reagents and SimplePhos Ligands

meso‐Hydrazines could be desymmetrised by ring‐opening reactions by using various metal catalysts to form substituted cyclopentenes, which have a high synthetic potential. Herein, we report the asymmetric copper‐catalysed ring opening of a range of polycyclic hydrazines with trialkylaluminium reagents and SimplePhos ligands with both high isolated yields and enantioselectivities of up to 95 %.     

Computational evaluation of radical ring‐opening polymerization

The tendencies of ring‐opening processes in radical ring‐opening polymerizations were evaluated by AM1 and PM3 semi‐empirical calculations and 6‐31G*‐level calculations based on the density functional theory (DFT) B3LYP models. Sixteen cyclic monomers bearing vinyl or exomethylene groups were categorized into ring‐opening and no‐ring‐opening monomers by the evaluation of the differences of the internal energies and the lengths of the cleaving bonds between the ground states of the initial radicals and the activated states in the ring‐opening processes. Although the semi‐empirical calculations not parameterized to radical reactions resulted in the moderate categorization of the ring‐opening monomers, the DFT calculation clearly distinguished the ring‐opening and no‐ring‐opening monomers. The ring‐opening tendencies were also evaluated with the changes in the internal energies throughout the ring‐opening processes, but this method could not group the ring‐opening and no‐ring‐opening monomers clearly. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2827–2834, 2007     

Copper‐Catalyzed Ring‐Opening Silylation of Benzofurans with Disilane

The catalytic ring‐opening silylation of benzofurans has been achieved by employing a copper catalyst and 1,2‐di‐tert‐butoxy‐1,1,2,2‐tetramethyldisilane, which could be easily prepared and handled without special care. The reaction afforded (E)‐o‐(β‐silylvinyl)phenols with complete stereoselectivity. The scope of benzofurans was well explored, and functional groups such as chloro, fluoro, and acetal were compatible with the reaction conditions. DFT calculations were used to determine the energy profile of the silylation and the origin of the stereoselectivity. The silylated product was proven to be useful as a synthetic intermediate and subsequently underwent transformations such as Pd‐catalyzed cross‐coupling with iodoarenes.     

Water‐Insensitive Synthesis of Poly‐β‐Peptides with Defined Architecture

Biocompatible and proteolysis‐resistant poly‐β‐peptides have broad applications and are dominantly synthesized via the harsh and water‐sensitive ring‐opening polymerization of β‐lactams in a glovebox or using a Schlenk line, catalyzed by the strong base LiN(SiMe₃)₂. We have developed a controllable and water‐insensitive ring‐opening polymerization of β‐amino acid N‐thiocarboxyanhydrides (β‐NTAs) that can be operated in open vessels to prepare poly‐β‐peptides in high yields, with diverse functional groups, variable chain length, narrow dispersity and defined architecture. These merits imply wide applications of β‐NTA polymerization and resulting poly‐β‐peptides, which is validated by the finding of a HDP‐mimicking poly‐β‐peptide with potent antimicrobial activities. The living β‐NTA polymerization enables the controllable synthesis of random, block copolymers and easy tuning of both terminal groups of polypeptides, which facilitated the unravelling of the antibacterial mechanism using the fluorophore‐labelled poly‐β‐peptide.     

FeCl3‐Catalyzed Ring‐Closing Carbonyl–Olefin Metathesis

Exploiting catalytic carbonyl–olefin metathesis is an ongoing challenge in organic synthesis. Reported herein is an FeCl₃‐catalyzed ring‐closing carbonyl–olefin metathesis. The protocol allows access to a range of carbo‐/heterocyclic alkenes with good efficiency and excellent trans diastereoselectivity. The methodology presents one of the rare examples of catalytic ring‐closing carbonyl–olefin metathesis. This process is proposed to take place by FeCl₃‐catalyzed oxetane formation followed by retro‐ring‐opening to deliver metathesis products.     

Synthesis and characterization of multiblock copolymers composed of poly(5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one) outer blocks and poly(L‐lactide) inner blocks

Ethylene glycol (EG) initiated, hydroxyl‐telechelic poly(L ‐lactide) (PLLA) was employed as a macroinitiator in the presence of a stannous octoate catalyst in the ring‐opening polymerization of 5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one (MBC) with the goal of creating A–B–A‐type block copolymers having polycarbonate outer blocks and a polyester center block. Because of transesterification reactions involving the PLLA block, multiblock copolymers of the A–(B–A)_n–B–A type were actually obtained, where A is poly(5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one), B is PLLA, and n is greater than 0. ¹H and ¹³C NMR spectroscopy of the product copolymers yielded evidence of the multiblock structure and provided the lactide sequence length. For a PLLA macroinitiator with a number‐average molecular weight of 2500 g/mol, the product block copolymer had an n value of 0.8 and an average lactide sequence length (consecutive C₆H₈O₄ units uninterrupted by either an EG or MBC unit) of 6.1. For a PLLA macroinitiator with a number‐average molecular weight of 14,400 g/mol, n was 18, and the average lactide sequence length was 5.0. Additional evidence of the block copolymer architecture was revealed through the retention of PLLA crystallinity as measured by differential scanning calorimetry and wide‐angle X‐ray diffraction. Multiblock copolymers with PLLA crystallinity could be achieved only with isolated PLLA macroinitiators; sequential addition of MBC to high‐conversion L ‐lactide polymerizations resulted in excessive randomization, presumably because of residual L ‐lactide monomer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6817–6835, 2006     

Biaryl Synthesis by Ring‐Opening Friedel–Crafts Arylation of 1,4‐Epoxy‐1,4‐dihydronaphthalenes Catalyzed by Iron Trichloride

Biaryl and heterobiaryl compounds are important frameworks across a range of fields including pharmaceutical and functional material chemistries. We have accomplished the efficient synthesis of various naphthalene‐linked arenes and heteroarenes as biaryls and heterobiaryls by the FeCl₃‐catalyzed Friedel‐Crafts reactions accompanied by the ring‐opening of the 1,4‐epoxy moiety of 1,4‐epoxy‐1,4‐dihydronaphthalenes. Especially, it is noteworthy that 1‐silylated substrates were regioselectively transformed to the 3‐aryl‐1‐silylnaphthalenes and the double Friedel–Crafts reactions using thiophene derivatives could directly produce the corresponding bis‐naphthlated thiophene derivatives.     

Reaction of 4‐benzylidene‐2‐methyl‐5‐oxazolone with amines,Part 2: Influence of substituents in para‐position in the phenyl ring and a substituent on amine nitrogen atom on the reaction kinetics

An influence of a structure of the amine (benzylamine, N‐methyl‐benzylamine, N‐isopropyl‐benzylamine, N‐methyl‐butylamine, N‐ethyl‐butylamine, sec‐butylamine, and tert‐butylamine) on a rate constant of the ring‐opening reaction of 4‐benzylidene‐2‐methyl‐5‐oxazolone (Ox) was studied. The good correlation between logarithm of the rate constants and Charton's steric substituent constant ν as well as good correlation with a form of the simple branching equation indicate that there is a steric effect because of substitution at C1 carbon atom of nucleophile which decreases the reaction rate. Additionally, an influence of a structure of the benzylidene moiety of Ox on a rate of the oxazolone ring‐opening reaction was studied. The substituents (? OH, ? OCH₃, ? N(CH₃)₂, ? Cl, ? NO₂) in para‐position of the phenyl ring of Ox substantially modified the rate of the reaction with benzylamine in acetonitrile. The rate of the Ox ring‐opening reaction decreased with increase of the electron‐donating properties of the substituent. A good correlation between the rate constants of the reaction of 4‐(4′‐substituted‐benzylidene)‐2‐methyl‐5‐oxazolones with benzylamine and the electron density at the reaction center (carbon C5 of the oxazolone ring), calculated using ab initio method, and the Hammett substituent constants, and CR equation were established. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 148–155, 2002; DOI 10.1002/kin.10039     

Mechanism and Selectivity of the Oxidative Ring Contraction of Cyclic α‐Formyl Ketones

The oxidative contraction of α‐formal ketone to form continuous all carbon chiral centers promoted by H₂O₂ is widely used in natural product total synthesis. Typically, using this transformation, chiral cyclic ketones are obtained as the major products and ring‐opening products as the minor products. Herein, DFT calculations have been used to investigate the detailed reaction mechanism and chemoselectivity. In addition, with the widely accepted mechanism of H₂O₂‐promoted transformation, our systematic investigation with various explicit‐solvent‐model calculations for the first time shows that H₂O and H₂O₂ are comparable at catalyzing the rate‐determining step of this reaction, which emphasis the importance of solvent effect in such transformations. It is found that both the less ring‐constrain and a later transition state in an exothermic reaction account for the origin why the reaction favors ring‐contraction pathway rather than ring‐opening one. By a comprehensive analysis for the substituted groups, it has been disclosed that the steric effects of the substituted groups on R² and R³ contribute to the selectivity with larger steric hindrance favoring the chiral cyclic products. Moreover, the electronic effects on R¹ but not R³ affect the selectivity with electron‐donating groups leading to the cyclic products. Based on our calculations, some predictions for higher selectivity have been made.