Synthesis and Fluorescence Properties of Pyrimidine‐Based Diboron Complexes with Donor–π–Acceptor Structures

Pyrimidine‐based diboron complexes bearing β‐iminoenolate ligands and phenyl groups as bulky substituents on the boron atoms were synthesized as novel fluorescent dyes, and their fluorescence properties were investigated in solution and in the solid state. The diboron complexes with donor–π–acceptor structures showed positive solvatochromism in the fluorescence spectra. The cyano derivative exhibited the most dramatic redshift of the fluorescence maximum F_max with increasing solvent polarity (from 551 nm in n‐hexane to 710 nm in acetonitrile). The diboron complexes showed solid‐state fluorescence in the range of 578–706 nm with fluorescence quantum yields of 0.06–0.28. Additionally, the trifluoromethyl derivative exhibited solvent‐inclusion solid‐state fluorescence. The trifluoromethyl derivative formed toluene‐inclusion and ethyl acetate‐inclusion crystals. The toluene‐inclusion crystal (F_max=668 nm, Φ_f=0.16) showed a blueshifted F_max and higher Φ_f value compared to the original trifluoromethyl derivative (F_max=694 nm, Φ_f=0.08) in the solid state. On the other hand, the F_max (709 nm) and Φ_f (0.04) values of the ethyl acetate‐inclusion crystal were redshifted and lower, respectively.     

Benzo[1,2‐d:4,5‐d′]bisimidazoles as a Convenient Platform Towards Dyes that are Capable of Excited‐State Intramolecular Proton Transfer and of Two‐Photon Absorption

New, strongly fluorescent benzo[1,2‐d:4,5‐d′]bisimidazoles have been prepared by the reaction of Bandrowski′s base with various aldehydes. Their structures were carefully designed to achieve efficient excited‐state intramolecular proton transfer and good two‐photon‐absorption (2PA) cross‐sections. Functional dyes that possessed both high fluorescence quantum yields and large Stokes shifts were prepared. A π‐expanded D‐A‐D derivative that possessed Φ_fl=50 % and σ₂=230 GM in the spectroscopic area of interest for biological imaging is an excellent candidate as a fluorescent probe. Thanks to the presence of two reactive amino groups, such compounds can be easily transformed into probes for bioconjugation. All of these benzo[1,2‐d:4,5‐d′]bisimidazoles were also strongly fluorescent in the solid state.     

The Photophysics of Pyridine‐Derivatized ortho‐, meta‐, and para‐Dibutylamino Cruciforms

The photophysical properties of a series of para‐substituted donor–acceptor cruciform fluorophores ( p 1 – 4 ) were investigated and compared with their meta and ortho isomers ( m 1 – 4 and o 1 – 4 ). The structural variations were found to have a significant effect on the solvatochromism, fluorescence quantum yields (Φ_fl), fluorescence lifetimes (τ_fl), and response upon addition of trifluoroacetic acid. The observed spectral shifts in absorption and emission caused by protonation of the cruciforms make them promising candidates as chemosensors. Additional computational studies provided more insight into the electronic structure of the systems.     

5,12‐Diacetyl‐5,12‐dihydroquinoxalino[2,3‐b]quinoxalines: Solid‐State Fluorescence,AIE Properties,and Orbital Switching by Substituent Effect

The compound 5,12‐diacetyl‐5,12‐dihydroquinoxalino[2,3‐b]quinoxaline 1 a and its derivatives were prepared, and their solid‐ and solution‐state spectroscopic properties were studied; 1 a shows stronger fluorescence in solution than in the solid state due to aggregation caused by self‐quenching. Phenyl‐ or alkoxy‐substituted derivatives 1 b – d show solid‐state fluorescence with moderate quantum yields of about Φ=0.12–0.15, although the corresponding values are 0.01–0.07 in solution. The spectroscopic properties of alkoxy‐substituted derivatives were hardly changed compared to 1 a and 1 b , although 1 a and 1 b have similar absorption and fluorescence maxima in solution and in the solid state. DFT calculations indicate that orbital switching occurs between HOMO and HOMO‐1 and HOMO‐2 due to orbital interactions with introduced substituents. Crystal structure analysis revealed that the molecules have bent structures around tertiary nitrogen atoms and form a characteristic dimeric structure.     

Color‐Tunable Solid‐State Fluorescence Emission from Carbazole‐Based BODIPYs

Several carbazole‐based boron dipyrromethene (BODIPY) dyes were synthesized by organometallic approaches. Thiazole, benzothiazole, imidazole, benzimidazole, triazole, and indolone substituents were introduced at the 1‐position of the carbazole moiety, and boron complexation of each dipyrrin generated the corresponding compounds 1 , 2 a , and 3 – 6 . The properties of these products were investigated by UV/Vis and fluorescence spectroscopy, cyclic voltammetry, X‐ray crystallography, and DFT calculations. These compounds exhibited large Stokes shifts, and compounds 1 , 2 a , and 3 – 5 fluoresced both in solution and in the solid state. Complex 2 a showed the highest fluorescence quantum yield (Φ_F) in the solid state, therefore boron complexes of the carbazole–benzothiazole hybrids 2 b – f , which had several different substituents, were prepared and the effects of the substituents on the photophysical properties of the compounds were examined. The fluorescence properties showed good correlation with the results of crystal‐packing analyses, and the dyes exhibited color‐tunable solid‐state fluorescence.     

Efficient NIR‐Light Emission from Solid‐State Complexes of Boron Difluoride with 2′‐Hydroxychalcone Derivatives

This article describes a series of nine complexes of boron difluoride with 2′‐hydroxychacone derivatives. These dyes were synthesized very simply and exhibited intense NIR emission in the solid state. Complexation with boron was shown to impart very strong donor–acceptor character into the excited state of these dyes, which further shifted their emission towards the NIR region (up to 855 nm for dye 5 b , which contained the strongly donating triphenylamine group). Strikingly, these optical features were obtained for crystalline solids, which are characterized by high molecular order and tight packing, two features that are conventionally believed to be detrimental to luminescence in organic crystals. Remarkably, the emission of light from the π‐stacked molecules did not occur at the expense of the emission quantum yield. Indeed, in the case of pyrene‐containing dye 4 , for example, a fluorescence quantum yield of about 15 % with a fluorescence emission maximum at 755 nm were obtained in the solid state. Moreover, dye 3 a and acetonaphthone‐based compounds 1 b , 2 b , and 3 b showed no evidence of degradation as solutions in CH₂Cl₂ that contained EtOH. In particular, solutions of brightly fluorescent compound 3 a (brightness: ε×Φ_f=45 000 M ^?1 cm^?1) could be stored for long periods without any detectable changes in its optical properties. All together, these new dyes possess a set of very interesting properties that make them promising solid‐state NIR fluorophores for applications in materials science.     

Spermine‐Functionalized Perylene Bisimide Dyes—Highly Fluorescent Bola‐Amphiphiles in Water

A series of four spermine‐functionalized perylene bisimide dyes without linkers ( 1 ) and with linkers ( 2 – 4 ) between the chromophore and the polyamine was synthesized. Protonation of the spermine moieties resulted in the formation of highly water‐soluble dyes with up to six positively charged ammonium ions. The aggregation behavior of these strongly fluorescent bola‐amphiphiles was studied in pure water as solvent by UV/Vis and fluorescence spectroscopy, and an astonishingly high fluorescence quantum yield of up to Φ_fl=0.90 was observed for PBI 1 . Atomic force microscopy and transmission electron microscopy were applied for the visualization of the aggregates on surfaces. Molecular modeling studies were performed by force‐field calculations to explore the aggregate morphologies, which also provided valuable information on the influence of the additional alkylcarbonyl linkers. Our detailed spectroscopic and microscopic investigations revealed that the excellent optical properties of perylene bisimide chromophores can be used even in pure deionized water if their aggregation is efficiently suppressed.     

Highly Emissive Diborylphenylene‐Containing Bis(phenylethynyl)benzenes: Structure–Photophysical Property Correlations and Fluoride Ion Sensing

A series of 2,5‐bis(dimesitylboryl)‐1,4‐bis(arylethynyl)benzenes 1 – 6 that contain various p‐substituents on the terminal benzene rings, including NPh₂ ( 1 ), OMe ( 2 ), Me ( 3 ), H ( 4 ), CF₃ ( 5 ), and CN ( 6 ) groups, were synthesized, and the effects of the p‐substituents on the absorption and fluorescence properties were investigated both in solution and in the solid state. Linear relationships were obtained not only between the Hammett σ_p⁺ constants of the p‐substituents and the absorption and fluorescence maxima, quantum yields, and excited‐state dynamics parameters in solution, but also between the σ_p⁺ constants and the fluorescence quantum yields in the solid state. An important finding extracted from these results is that the suppressed fluorescence quenching in the solid state is a common feature for the present laterally boryl‐substituted π‐conjugated skeletons. Hence, the diborylphenylene can serve as a useful core unit to develop highly emissive organic solids. In fact, most of the derivatives showed more intense emission in the solid state than in solution. In addition to these studies, the titration experiment of 1 by the addition of nBu₄NF was conducted, which showed the stepwise bindings of two fluoride ions with high association constants as well as a drastic change in the fluorescence spectra, while constantly maintaining high quantum yields (0.61–0.76), irrespective of the binding modes. This result also demonstrated the potential utility of the present molecules as an efficient fluorescent fluoride ion sensor.     

Modified 6‐Aza Uridines: Highly Emissive pH‐Sensitive Fluorescent Nucleosides

Optimized facile syntheses and highly desirable spectroscopic properties of two isomorphic fluorescent pyrimidines, comprising a 1,2,4‐triazine motif conjugated to a thiophene ( 1 a ) or a furan ( 1 b ), are described. Although structurally related to their 5‐modified uridine counterparts, these modified 6‐aza‐uridines reveal dramatically improved fluorescence properties and a remarkable sensitivity to polarity and pH changes. The thiophene derivative 1 a has an absorption maximum around 335 nm, which upon excitation yields visible emission with a polarity‐sensitive maximum and fluorescence quantum yield ranging from 415 nm (Φ=0.8) to 455 nm (Φ=0.2) in dioxane and water, respectively. Nucleoside 1 a also displays susceptibility to acidity. Correlating emission intensity and solution pH yields a pK_a value of 6.7–6.9, reasonably close to physiological pH values. The results illustrate that highly sought‐after fluorescence features (brightness and responsiveness) are not necessarily the trait of large fluorophores alone, but can be observed with probes that meet stringent isomorphic design criteria.     

Systematic Investigation of Molecular Arrangements and Solid‐State Fluorescence Properties on Salts of Anthracene‐2,6‐disulfonic Acid with Aliphatic Primary Amines

Organic salts of anthracene‐2,6‐disulfonic acid (ADS) with a wide variety of primary amines have been fabricated, and their arrangements of anthracene molecules and solid‐state fluorescence properties investigated. Single‐crystal X‐ray studies reveal that the salts show seven types of crystal forms and corresponding molecular arrangements of anthracene moieties depending on the amine, while anthracene shows only one form and arrangement in the solid state. Depending on the molecular arrangements, the ADS salts exhibit various solid‐state fluorescence properties: spectral shift (30 nm) and suppression and enhancement of the fluorescence intensity. Especially the ADS salt with n‐heptylamine (nHepA), which shows discrete anthracene moieties in the crystal, exhibits the highest quantum yield (Φ_F=46.1±0.2 %) in the series of ADS salts, which exceeds that of anthracene crystal (Φ_F=42.9±0.2 %). From these systematic investigations on the arrangements and the solid‐state properties, the following factors are essential for high fluorescence quantum yield in the solid state: prevention of contact between π planes of anthracene moieties and immobilization of anthracene rings. In addition, such organic salts have potential as a system for modulating the molecular arrangements of fluorophores and the concomitant solid‐state properties. Thus, systematic investigation of this system constructs a library of arrangements and properties, and the library leads to remarkable strategies for the development of organic solid materials.     

Synthesis,Crystal Structure,and Photophysical Properties of (1E,3E,5E)‐1,3,4,6‐Tetraarylhexa‐1,3,5‐trienes: A New Class of Fluorophores Exhibiting Aggregation‐Induced Emission

Double Horner–Wadsworth–Emmons reaction of (E)‐2,3‐diaryl‐1,4‐bis(diethylphosphonyl)but‐2‐ene with (p‐substituted) benzaldehydes gave (1E,3E,5E)‐1,3,4,6‐tetraarylhexa‐1,3,5‐trienes in moderate to good yields. Substitution of electron‐withdrawing or ‐donating groups at the para position of the 1,6‐diphenyl groups induced a slight bathochromic shift of UV spectra measured in CHCl₃ compared with that of the parent 1,3,4,6‐tetraphenylhexa‐1,3,5‐triene. Although fluorescence was not observed with all the trienes in CHCl₃, they markedly emitted visible light in powder forms with quantum yields of 0.15–0.44. Introduction of amino groups at the para position of the 3,4‐diphenyl groups induced a bathochromic shift of emission maxima with good solid‐state quantum yields. Thus, the tetraarylated triene framework is found to serve as a new class of fluorophores that exhibit aggregation‐induced emission.     

Bright Solid‐State Emission of Disilane‐Bridged Donor–Acceptor–Donor and Acceptor–Donor–Acceptor Chromophores

The development of disilane‐bridged donor–acceptor–donor (D‐Si‐Si‐A‐Si‐Si‐D) and acceptor–donor–acceptor (A‐Si‐Si‐D‐Si‐Si‐A) compounds is described. Both types of compound showed strong emission (λ_em=ca. 500 and ca. 400 nm, respectively) in the solid state with high quantum yields (Φ: up to 0.85). Compound 4 exhibited aggregation‐induced emission enhancement in solution. X‐ray diffraction revealed that the crystal structures of 2 , 4 , and 12 had no intermolecular π–π interactions to suppress the nonradiative transition in the solid state.     

Metal‐Free Facile Synthesis of Multisubstituted 1‐Aminoisoquinoline Derivatives with Dual‐State Emissions

Although isoquinoline is a good traditional fluorescent structural unit, most of its derivatives emit fluorescence in solution and a few of them can emit solid‐state fluorescence as well. Herein, a series of multisubstituted 1‐aminoisoquinoline derivatives were synthesized by a simple reaction of a readily available 4H‐pyran derivative and secondary amines. The reaction had advantages of metal‐free, mild conditions, simple operation, and good yields, which was realized by a ring‐opening and sequential ring‐closing mechanism. These 1‐aminoisoquinoline derivatives were found to exhibit interesting dual‐state emissions. In the solution, they emitted strong blue fluorescence at about 458 nm. In the solid state, they emitted solid‐state blue fluorescence at 444–468 nm with high fluorescence quantum yields of 40.3–98.1%. Crystal structural analyses indicated that solid‐state emissions of these compounds originated from twisted molecular conformations and the resultant loose stacking arrangements. Furthermore, their solid‐state fluorescence wavelengths were demonstrated to depend on molecular conformations rather than stacking arrangements. The discovery of these 1‐aminoisoquinolines with multiple reaction sites provides new possibilities for the development of solid‐state fluorescent materials based on the traditional isoquinoline skeleton.     

1,2,5-Triphenylpyrrole Derivatives with Dual Intense Photoluminescence in Both Solution and the Solid State: Solvatochromism and Polymorphic Luminescence Properties

Five organic luminophores, 1,2,5-triphenylpyrrole (TPP) derivatives 3 a – e bearing electron-withdrawing or electron-donating groups, have been synthesized by Pd-catalyzed Suzuki coupling of 1-phenyl-2,5-di(4′-bromophenyl)pyrrole and para-substituted phenylboronic acid derivatives. They possess good thermal stabilities with high decomposition temperatures above 310 °C. Investigation of the photophysical properties of the luminogens 3 a – e indicated that they exhibited dual intense photoluminescence in both solution and the solid state due to their twisted conformations, and their fluorescence quantum yields (Φ_F) were determined as 68.7–94.9 % in THF solution and 19.1–52.0 % in solid powder form. Compounds 3 a – c bearing electron-accepting groups exhibited remarkable solvatochromism with large Stokes shifts, attributable to their D-π-A structure and intramolecular charge-transfer effect. In particular, 3 a , bearing aldehyde groups, displayed an obvious red-shift of the emission band from 445 to 564 nm with increasing solvent polarity. However, no obvious solvatochromic behavior was observed for compounds 3 d , e bearing electron-donating groups. The luminophore 3 a exhibited polymorphic luminescence properties and crystallization-induced emission enhancement.     

Organic Crystals with Near‐Infrared Amplified Spontaneous Emissions Based on 2′‐Hydroxychalcone Derivatives: Subtle Structure Modification but Great Property Change

A series of highly efficient deep red to near‐infrared (NIR) emissive organic crystals 1 – 3 based on the structurally simple 2′‐hydroxychalcone derivatives were synthesized through a simple one‐step condensation reaction. Crystal 1 displays the highest quantum yield (Φ_f) of 0.32 among the reported organic single crystals with an emission maximum (λ_em) over 710 nm. Comparison between the bright emissive crystals 1 – 3 and the nearly nonluminous compounds 4 – 7 clearly gives evidence that a subtle structure modification can arouse great property changes, which is instructive in designing new high‐efficiency organic luminescent materials. Notably, crystals 1 – 3 exhibit amplified spontaneous emissions (ASE) with extremely low thresholds. Thus, organic deep red to NIR emissive crystals with very high Φ_f have been obtained and are found to display the first example of NIR fluorescent crystal ASE.     

Two‐Photon‐Induced Fluorescence in New π‐Expanded Diketopyrrolopyrroles

Structurally unique π‐expanded diketopyrrolopyrroles (EDPP) were designed and synthesized. Strategic placement of a fluorene scaffold at the periphery of a diketopyrrolopyrrole through tandem Friedel–Crafts‐dehydration reactions resulted in dyes with supreme solubility. The structure of the dyes was confirmed by X‐ray crystallography verifying a nearly flattened arrangement of the ten fused rings. Despite the extended ring system, the dye still preserved good solubility and was further functionalized by using Pd‐catalyzed coupling reactions, such as the Buchwald–Hartwig amination. Photophysical studies of these new functional dyes revealed that they possess enhanced properties when compared with expanded DPPs in terms of two‐photon absorption cross‐section. It is further demonstrated that in addition to the initial diacetals, the final electrophilic cyclization step can also be applied to diketones. By placing two amine groups at peripheral positions of the resulting dyes, values of two‐photon absorption cross‐section on the level of 2000 GM around 1000 nm were achieved, which in combination with high fluorescence quantum yield (Φ_fl), generated a two‐photon brightness of approximately 1600 GM. These characteristics in combination with strong red emission (665 nm) make these new π‐expanded diketopyrrolopyrroles of major promise as two‐photon dyes for bioimaging applications. Finally, the corresponding N‐alkylated DPPs displayed a solid‐state fluorescence.     

3,14‐Bis(p‐nitrophenyl)‐17,17‐dipentyltetrabenzo[a,c,g,i]‐fluorene: A New Fluorophore Displaying Both Remarkable Solvatochromism and Crystalline‐Induced Emission

A series of 17,17‐dialkyl‐3,14‐diaryltetrabenzofluorenes were efficiently prepared by using Suzuki–Miyaura cross‐coupling reactions of the corresponding 3,14‐dibromo derivatives. Studies of the unique fluorescence properties of these compounds showed that they display intense blue to yellow fluorescence with high quantum yields in the solution state and blue to orange fluorescence with moderate quantum yields in the solid state. In addition, the fluorescence wavelength of the bis(p‐nitrophenyl) derivative is remarkably solvent‐dependent in a manner that correlates with the solvent polarity parameter E_T(30). The results of density function theory calculations suggest that the intramolecular charge‐transfer character of the HOMO–LUMO transition is responsible for the large solvent effect. Moreover, addition of water to a tetrahydrofuran (THF) solution of this compound leads to quenching of the yellow fluorescence owing to an increase in the solvent polarity. However, when the amount of water fraction exceeds 70 %, a new fluorescence band appears at the same orange‐red emission wavelength as that of the solid‐state fluorescence. This observation suggests the occurrence of a crystallization‐induced emission (CIE) phenomenon in highly aqueous THF.     

Single Benzene Green Fluorophore: Solid‐State Emissive,Water‐Soluble,and Solvent‐ and pH‐Independent Fluorescence with Large Stokes Shifts

Benzene is the simplest aromatic hydrocarbon with a six‐membered ring. It is one of the most basic structural units for the construction of π conjugated systems, which are widely used as fluorescent dyes and other luminescent materials for imaging applications and displays because of their enhanced spectroscopic signal. Presented herein is 2,5‐bis(methylsulfonyl)‐1,4‐diaminobenzene as a novel architecture for green fluorophores, established based on an effective push–pull system supported by intramolecular hydrogen bonding. This compound demonstrates high fluorescence emission and photostability and is solid‐state emissive, water‐soluble, and solvent‐ and pH‐independent with quantum yields of Φ=0.67 and Stokes shift of 140 nm (in water). This architecture is a significant departure from conventional extended π‐conjugated systems based on a flat and rigid molecular design and provides a minimum requirement for green fluorophores comprising a single benzene ring.     

Luminescent Quadrupolar Borazine Oligomers: Synthesis,Photophysics, and Two‐Photon Absorption Properties

A set of monodisperse bent donor–acceptor–donor‐type conjugated borazine oligomers, BnNn+1 (n=1–4), incorporating electron‐rich triarylamine donor and electron‐deficient triarylborane acceptor units has been prepared through an iterative synthetic approach that takes advantage of highly selective silicon–boron and tin–boron exchange reactions. The effect of chain elongation on the electrochemical, one‐ and two‐photon properties and excited‐state photodynamics has been investigated. Strong intramolecular charge transfer (ICT) from the arylamine donors to boryl‐centered acceptor sites results in emissions with high quantum yields (Φ_fl>0.5) in the range of 400–500 nm. Solvatochromic effects lead to solvent shifts as large as ～70 nm for the shortest member (n=1) and gradually decrease with chain elongation. The oligomers exhibit strong two‐photon absorption (2PA) in the visible spectral region with 2PA cross sections as large as 1410 GM (n=4), and broadband excited‐state absorption (ESA) attributed to long‐lived singlet–singlet and radical cation/anion absorption. The excited‐state dynamics also show sensitivity to the solvent environment. Electrochemical observations and DFT calculations (B3LYP/6‐31G*) reveal spatially separated HOMO and LUMO levels resulting in highly fluorescent oligomers with strong ICT character. The BnNn+1 oligomers have been used to demonstrate the detection of cyanide anions with association constants of log K>7.     

Single Benzene Green Fluorophore: Solid‐State Emissive,Water‐Soluble,and Solvent‐ and pH‐Independent Fluorescence with Large Stokes Shifts

Benzene is the simplest aromatic hydrocarbon with a six‐membered ring. It is one of the most basic structural units for the construction of π conjugated systems, which are widely used as fluorescent dyes and other luminescent materials for imaging applications and displays because of their enhanced spectroscopic signal. Presented herein is 2,5‐bis(methylsulfonyl)‐1,4‐diaminobenzene as a novel architecture for green fluorophores, established based on an effective push–pull system supported by intramolecular hydrogen bonding. This compound demonstrates high fluorescence emission and photostability and is solid‐state emissive, water‐soluble, and solvent‐ and pH‐independent with quantum yields of Φ=0.67 and Stokes shift of 140 nm (in water). This architecture is a significant departure from conventional extended π‐conjugated systems based on a flat and rigid molecular design and provides a minimum requirement for green fluorophores comprising a single benzene ring.