ipso‐Arylative Ring‐Opening Polymerization as a Route to Electron‐Deficient Conjugated Polymers

ipso‐Arylative ring‐opening polymerization of 2‐bromo‐8‐aryl‐8H‐indeno[2,1‐b]thiophen‐8‐ol monomers proceeds to M_n up to 9 kg mol^?1 with conversion of the monomer diarylcarbinol groups to pendent conjugated aroylphenyl side chains (2‐benzoylphenyl or 2‐(4‐hexylbenzoyl)phenyl), which influence the optical and electronic properties of the resulting polythiophenes. Poly(3‐(2‐(4‐hexylbenzoyl)phenyl)thiophene) was found to have lower frontier orbital energy levels (HOMO/LUMO=?5.9/?4.0 eV) than poly(3‐hexylthiophene) owing to the electron‐withdrawing ability of the aryl ketone side chains. The electron mobility (ca. 2×10^?3 cm² V^?1 s^?1) for poly(3‐(2‐(4‐hexylbenzoyl)phenyl)thiophene) was found to be significantly higher than the hole mobility (ca. 8×10^?6 cm² V^?1 s^?1), which suggests such polymers are candidates for n‐type organic semiconductors. Density functional theory calculations suggest that backbone distortion resulting from side‐chain steric interactions could be a key factor influencing charge mobilities.     

Arylacetylene‐Substituted Naphthalene Diimides with Dual Functions: Optical Waveguides and n‐Type Semiconductors

New arylacetylene‐substituted naphthalene diimides (NDIs) 1–6 , with both light‐emitting and semiconducting functions, are reported. Among them, the crystal structure of 1 was determined. On the basis of their reduction potentials and thin‐film absorption spectra, the HOMO/LUMO energies of these modified NDIs were estimated. The results reveal that their HOMO/LUMO energies are slightly affected by the flanking aryl groups. The emission colors of these NDIs vary from green to red, and interestingly, they show aggregation‐induced emission enhancement behavior with fluorescence quantum yields reaching 9.86 % in the solid state. Microrods of 1 , 3 , and 5 show typical optical wave‐guiding behavior with relatively low optical‐loss coefficients. Organic field‐effect transistors with thin films of these NDIs were fabricated with conventional techniques. The results indicate that thin films of 2 , 4 , and 6 , with long and branched alkyl chains, show air‐stable n‐type semiconducting properties with electron mobilities of up to 0.035 cm² V^?1 s^?1 after thermal annealing, whereas 1 , 3 , and 5 , with short alkyl chains, behave as n‐type semiconductors under a nitrogen atmosphere with electron mobilities of up to 0.075 cm² V^?1 s^?1 after thermal annealing.     

Naphthodithiophene‐Diketopyrrolopyrrole‐Based donor–Acceptor alternating π‐Conjugated polymers for Organic thin‐Film transistors

Novel naphtho[1,2‐b:5,6‐b′]dithiophene (NDT) and diketopyrrolopyrrole (DPP)‐containing donor‐acceptor conjugated polymers (PNDTDPPs) with different branched side chains were synthesized via Pd(0)‐catalyzed Stille coupling reaction. Octyldodecyl (OD) and dodecylhexadecyl (DH) groups were tethered to the DPP units as the side chains. The soluble fraction of PNDTDPP‐OD polymer in chloroform has much lower molecular weight than that of PNDTDPP‐DH polymer. PNDTDPP‐DH polymer bearing relatively longer DH side chains exhibited much better charge‐transport behavior than PNDTDPP‐OD polymer with shorter OD side chains. The thermally annealed PNDTDPP‐DH polymer thin films exhibited an outstanding charge carrier mobility of ～1.32 cm² V^?1 s^?1 (I_on/I_off ～ 10⁸) measured under ambient conditions, which is almost six times higher than that of thermally annealed PNDTDPP‐OD polymer thin films. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5280–5290     

Synthesis and Properties of Alkoxy‐ and Alkenyl‐Substituted Peralkylated Imidazolium Ionic Liquids

Novel peralkylated imidazolium ionic liquids bearing alkoxy and/or alkenyl side chains have been synthesized and studied. Different synthetic routes towards the imidazoles and the ionic liquids comprising bromide, iodide, methanesulfonate, bis(trifluoromethylsulfonyl)imide ([NTf₂]^?), and dicyanamide {[N(CN)₂]^?} as the anion were evaluated, and this led to a library of analogues, for which the melting points, viscosities, and electrochemical windows were determined. Incorporation of alkenyl moieties hindered solidification, except for cations with high symmetry. The alkoxy‐derivatized ionic liquids are often crystalline; however, room‐temperature ionic liquids (RTILs) were obtained with the weakly coordinating anions [NTf₂]^? and [N(CN)₂]^?. For the viscosities of the peralkylated RTILs, an opposite trend was found, that is, the alkoxy derivatives are less viscous than their alkenyl‐substituted analogues. Of the crystalline compounds, X‐ray diffraction data were recorded and related to their molecular properties. Upon alkoxy substitution, the electrochemical cathodic limit potential was found to be more positive, whereas the complete electrochemical window of the alkenyl‐substituted imidazolium salts was shifted to somewhat more positive potentials.     

Ultra‐small sugar‐substituted N‐heterocyclic carbene‐protected palladium nanoparticles and catalytic activity

Ultra‐small Pd nanoparticles (UNPs) represent a distinctive type of nanomaterial making them very attractive for a range of applications. Herein, chiral sugar‐substituted N‐heterocyclic carbenes (NHCs) with various lengths of alkyl chain (sugar‐NHCs‐ⁿC_nH_2n+1) were first used to prepare water‐soluble Pd@NHCs‐sugar UNPs via an efficient ligand‐exchange strategy, which can be handled under air and are stable over 10 months. The Pd@NHCs‐sugar UNPs were highly monodisperse, with tunable core diameters from 1.7 to 2.1 nm, and an effect of the particle size on the N‐substituted aliphatic chains was observed. To investigate the accessibility of the surface, the Pd@NHCs‐sugar UNPs were studied as catalysts for C–C coupling reaction in eco‐friendly ethanol aqueous solution without any precipitation of metallic Pd. The presence of the longest aliphatic group in the Pd@NHCs‐sugar UNPs imparts to them the highest catalyst activity (turnover number and turnover frequency up to 196 000 and 3 920 000 h^?1).     

Functionalized poly(oxanorbornene)‐block‐copolymers: Preparation via ROMP/click‐methodology

Block copolymers on basis of poly(oxanorbornenes) bearing functional moieties in their side‐chains are prepared via a combination of ROMP‐methods and 1,3‐dipolar‐“click”‐reactions. Starting from N‐substituted‐ω‐bromoalkyl‐oxanorbornenes and alkyl‐/perfluoroalkyl‐oxanorbornenes, block copolymers with molecular weights up to 25,000 g mol^?1 were generated. Subsequent nucleophilic exchange‐reactions yielded the block‐copolymers functionalized with ω‐azidoalkyl‐moieties in one block. The 1,3‐azide/alkine‐“click” reactions with a variety of terminal alkynes in the presence of a catalyst system consisting of tetrakis(acetonitrile)hexafluorophosphate copper(I) and tris(1‐benzyl‐5‐methyl‐1H‐ [1,2,3]triazol‐4‐ylmethyl)‐amine furnished the substituted block copolymers in high yields, as proven by NMR‐spectroscopy. The resulting polymers were investigated via temperature‐dependent SAXS‐methods, revealing their microphase separated structure as well as their temperature‐dependent behavior. The presented method offers the generation of a large set of different block‐copolymers from only a small set of starting materials because of the high versatility of the “click” reaction, thus enabling a simple and complete functionalization after the initial polymerization reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 485–499, 2007     

Theoretical Study on Gas—phase Pyrolytic Reactions of N—Ethyl,Isopropyl and N—t—Butyl Substituted 2—Aminopyrazine

Density functional theory (DFT) and ab initio methods were used to study gas‐phase pyrolytic reaction mechanisms of iV‐ethyl, N‐isopropyl and N‐t‐butyl substituted 2‐aminopyrazine at B3LYP/6–31G* and MP2/6–31G*, respectively. Single‐point energies of all optimized molecular geometries were calculated at B3LYP/6–311 + G(2d,p) level. Results show that the pyrolytic reactions were carried out through a unimolecular first‐order mechanism which were caused by the migration of atom H(17) via a six‐member ring transition state. The activation energies which were verified by vibrational analysis and correlated with zero‐point energies along the reaction channel at B3LYP/6–311 + G(2d,p) level were 252.02 kJ. mo^?1 (N‐ethyl substituted), 235.92 kJ‐mol^?1 (N‐t‐isopropyl substituted) and 234.27 kJ‐mol^?1 (N‐t‐butyl substituted), respectively. The results were in good agreement with available experimental data.     

An Acid‐Catalyzed Fragmentation Reaction of a Triamine‐Linked Acridine Dimer

An acid‐catalyzed cleavage of the C‐N^? bond from N^?‐(2,3,4,5‐tetrahydroxyvaleryl) substituted side chain and/or its acetonide form of a triamine‐linked acridine dimer is de scribed. An envisaged multi‐neighboring group‐assisted solvolysis reaction mechanism is proposed.     

Effects of substituted side‐chain position on donor–acceptor conjugated copolymers

The optical properties and electrical properties of a series of low‐band‐gap conjugated copolymers, in which alkyl side chains were substituted at various positions, were investigated using donor–acceptor conjugated copolymers consisting of a cyclopentadithiophene derivative and dithienyl‐benzothiadiazole. With substituted side chains, the intrinsic properties of the copolymers were significantly altered by perturbations of the intramolecular charge transfer. The absorption of poly[2, 6‐(4,4‐bis(2‐octyl)‐4H‐cyclopenta‐[2,1‐b:3,4‐b′]dithiophene)‐alt‐4, 7‐bis(4‐octyl‐thiophene‐2‐yl)benzo‐2,1,3‐thiadiazole] [ PCPDT‐ttOTBTOT ( P2 )], which assumed a tail–tail configuration, tended to blue shift relative to the absorption of poly[2,6‐(4,4‐bis(2‐octyl)‐4H‐cyclopenta‐[2,1‐b:3,4‐b′]dithiophene)‐alt‐4,7‐bis (thiophene‐2‐yl)benzo‐2,1,3‐thiadiazole] [ PCPDT‐TBTT ( P1 )]. The absorption of poly[2,6‐(4,4‐bis(2‐octyl)‐4H‐cyclopenta‐[2,1‐b:3, 4‐b′]dithiophene)‐alt‐4,7‐bis(3‐octyl‐thiophene‐2‐yl)benzo‐2,1,3‐thiadiazole] [ PCPDT‐hhOTBTOT ( P3 )], which assumed a head–head configuration, was blue shifted relative to that of P2 . The electrical transport properties of field‐effect transistors were sensitive to the side chain position. The field‐effect mobility in P2 (μ₂ = 1.8 × 10^?3 cm²/V s) was slightly lower than that in P1 (μ₁ = 4.9 × 10^?3 cm²/V s). However, the mobility of P3 was very low (μ₃ = 3.8 × 10^?6 cm²/V s). Photoexcitation spectroscopy showed that the charge generation efficiency (shown in transient absorption spectra) and polaron pair mobility in P1 and P2 were higher than in P3 , yielding P1 and P2 device performances that were better than the performance of devices based on P3 . © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Blue‐light‐emitting polyfluorene functionalized with triphenylamine and cyanophenylfluorene bipolar side chains

A new bipolar conjugated polyfluorene copolymer with triphenylamine and cyanophenylfluorene as side chains, poly{[9,9‐di(triphenylamine)fluorene]‐[9,9‐dihexyl‐fluorene]‐[2,7‐bis(4′‐cyanophenyl)‐9,9′‐spirobifluorene]} ( PTHCF ), was synthesized for studying the polymer backbone emission. Its absolute weight‐average molecular weight was determined as 4.85 × 10⁴ by using gel permeation chromatography with a multiangle light scattering detector. In contrast to the electronic absorption spectrum in dilute solution, the absorbance of PTHCF in thin film was slightly blue shifted. By comparison of the solution and thin‐film photoluminescence (PL) spectra, a red shift of Δλ = 8–9 nm was observed in the thin‐film PL spectrum. The HOMO and LUMO energy levels of the resulting polymer were electrochemically estimated as ?5.68 and ?2.80 eV, respectively. Under the electric‐field intensity of 4.8 × 10⁵ V cm^?1, the obtained hole and electron mobilities were 2.41 × 10^?4 and 1.40 × 10^?4 cm² V^?1 s^?1, respectively. An electroluminescence device with configuration of ITO/PEDOT:PSS/ PTHCF _70%+PBD_30%/CsF/Ca/Al exhibited a deep‐blue emission as a result of excitons formed by the charges migrating along the full‐fluorene main chain. The incorporation of the bipolar side chains into the polymer structure prevented the intermolecular interaction of the fluorene moieties, balance charge injection/transport, and thereby improve the polymer backbone emission. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Side chain impacts on pH‐ and thermo‐responsiveness of tertiary amine functionalized polypeptides

The systemic investigation of the structural impacts of side chains on the pH‐ and thermo‐responsiveness of tertiary amine functionalized poly(l ‐glutamate)s (TA‐PGs) was carried out. The TA‐PGs polymers were effectively synthesized by Cu(I)‐catalyzed azide‐alkyne cycloaddition click reaction of azido tertiary amines with poly(γ‐propargyl‐l ‐glutamate) (PPLG). Turbimetric measurements were performed to characterize the pH‐ and temperature‐induced phase transition of TA‐PGs in aqueous solution, which suggested a structural dependence of the properties on the N‐substituted groups and the “linkers” between 1,2,3‐triazole ring and the tertiary amine groups in the side chains. In detail, the pH responsive properties of TA‐PGs were basically determined by the hydrophobicity of the N‐substituted groups in the side chains and the pH transition point (pH_t) decreased as the increasing hydrophobicity of the N‐substituted groups, while the temperature‐responsiveness of TA‐PGs were affected by either the N‐substituted groups or the “linkers.” TA‐PGs with a moderate N‐substituted amine group (e.g., DEA, PR, and PD) or a branched “linker” (e.g., iso‐propylene and 2‐methylpropylene group) were more likely to express the LCST‐type phase transition tuned by pH variation. These structure–property relationships revealed in this study would help to develop the applications of TA‐PGs in smart drug delivery systems. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 671–679     

An A‐D‐A′‐D‐A Conjugated Molecule Entailing Diazapentalene Unit for an n‐Type Organic Semiconductor

Conjugated molecules with low lying LUMO levels are demanding for the development of air stable n‐type organic semiconductors. In this paper, we report a new A‐D‐A′‐D‐A conjugated molecule ( DAPDCV ) entailing diazapentalene (DAP) and dicyanovinylene groups as electron accepting units. Both theoretical and electrochemical studies manifest that the incorporation of DAP unit in the conjugated molecule can effectively lower the LUMO energy level. Accordingly, thin film of DAPDCV shows n‐type semiconducting behavior with electron mobility up to 0.16 cm²?V^?1?s^?1 after thermal annealing under N₂ atmosphere. Moreover, thin film of DAPDCV also shows stable n‐type transporting property in air with mobility reaching 0.078 cm²?V^?1?s^?1.     

High‐performance field‐effect transistors based on furan‐containing diketopyrrolopyrrole copolymer under a mild annealing temperature

Two furan‐flanked polymers poly{3,6‐difuran‐2‐yl‐2,5‐di(2‐octyldodecyl)‐pyrrolo[3,4‐c]pyrrole‐1,4‐dione‐alt‐thienylenevinylene} (PDVFs), with a highly π‐extended diketopyrrolopyrrole backbone, are developed for solution‐processed high‐performance polymer field‐effect transistors (FETs). Atomic force microscopy and grazing incidence X‐ray scattering analyses indicate that PDVF‐8 and PDVF‐10 films exhibit a similar nodular morphology with the ultrasmall lamellar distances of 16.84 and 18.98 Å, respectively. When compared with the reported polymers with the same alkyl substitutes, this is the smallest d‐spacing value observed to date. This closed lamellar crystallinity facilitates charge carrier transport. Therefore, polymer thin‐film transistors fabricated from as‐spun PDVF‐8 films exhibit a high hole mobility exceeding 1.0 cm² V^?1 s^?1 with a current on/off ratio above 10⁶. After annealing treatment at 100 °C in air, the highest hole mobility of PDVF‐8‐based FETs was significantly improved to 1.90 cm² V^?1 s^?1, which is among the highest values of the reported FET devices fabricated from polymer thin films based on this mild annealing temperature. In contrast, long alkyl‐substituted PDVF‐10 exhibited a relatively low hole mobility of 1.65 cm² V^?1 s^?1 mainly resulting from low molecular weight. This work demonstrated that PDVFs would be promising semiconductors for developing cost‐effective and large‐scale production of flexible organic electronics. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1970–1977     

Solution‐Processable n‐Type Organic Field‐Effect Transistor (OFET) Materials Based on Carbonyl‐Bridged Bithiazole and Dioxocyclopentene‐Annelated Thiophenes

A series of electronegative π‐conjugated compounds composed of carbonyl‐bridged bithiazole and alkyl‐substituted dioxocyclopenta[b]thiophene were synthesized as a candidate for solution‐processable n‐type organic semiconductor materials and characterized on the basis of photophysical and electrochemical properties. Cyclic voltammetry measurements showed that the first half‐wave reduction potentials of these compounds are between −0.97 and −1.14 V versus ferrocene/ferrocenium, which corresponds to lowest unoccupied molecular orbital energy levels between −3.83 and −3.66 eV. Thanks to hexyl or dodecyl groups in the molecules, the compounds are sufficiently soluble to realize the fabrication of their thin films through a spin‐coating method. As a result, the prepared organic field‐effect transistors based on these newly developed compounds exhibited n‐channel characteristics not only under vacuum but also in air, and the best field‐effect electron mobility observed under vacuum was 0.011 cm² V⁻¹ s⁻¹ with an on/off ratio of 10⁸ and a threshold voltage of 16 V.     

Three‐Dimensional Antiferromagnetic Order of Single‐Chain Magnets: A New Approach to Design Molecule‐Based Magnets

Two one‐dimensional compounds composed of a 1:1 ratio of Mn^III salen‐type complex and Ni^II oximato moiety with different counter anions, PF₆^? and BPh₄^?, were synthesized: [Mn(3,5‐Cl₂saltmen)Ni(pao)₂(phen)]PF₆ ( 1 ) and [Mn(5‐Clsaltmen)Ni(pao)₂(phen)]BPh₄ ( 2 ), where 3,5‐Cl₂saltmen^2?=N,N′‐(1,1,2,2‐tetramethylethylene)bis(3,5‐dichlorosalicylideneiminate); 5‐Clsaltmen^2?=N,N′‐(1,1,2,2‐tetramethylethylene)bis(5‐chlorosalicylideneiminate); pao^?=pyridine‐2‐aldoximate; and phen=1,10‐phenanthroline. Single‐crystal X‐ray diffraction study was carried out for both compounds. In 1 and 2 , the chain topology is very similar forming an alternating linear chain with a [‐Mn^III‐ON‐Ni^II‐NO‐] repeating motif (where ‐ON‐ is the oximate bridge). The use of a bulky counteranion, such as BPh₄^?, located between the chains in 2 rather than PF₆^? in 1 , successfully led to the magnetic isolation of the chains in 2 . This minimization of the interchain interactions allows the study of the intrinsic magnetic properties of the chains present in 1 and 2 . While 1 and 2 possess, as expected, very similar paramagnetic properties above 15 K, their ground state is antiferromagnetic below 9.4 K and paramagnetic down to 1.8 K, respectively. Nevertheless, both compounds exhibit a magnet‐type behavior at temperatures below 6 K. While for 2 , the observed magnetism is well explained by a Single‐Chain Magnet (SCM) behavior, the magnet properties for 1 are induced by the presence in the material of SCM building units that order antiferromagnetically. By controlling both intra‐ and interchain magnetic interactions in this new [Mn^IIINi^II] SCM system, a remarkable AF phase with a magnet‐type behavior has been stabilized in relation with the intrinsic SCM properties of the chains present in 1 . This result suggests that the simultaneous enhancement of both intrachain (J) and interchain (J′) magnetic interactions (with keeping J ? J′), independently of the presence of AF phase might be an efficient route to design high temperature SCM‐based magnets.     

Effect of branched alkyl side chains on the performance of thin‐film transistors and photovoltaic cells fabricated with isoindigo‐based conjugated polymers

New isoindigo and di(thienyl)ethylene‐containing π‐extended conjugated polymers with different branched side chains were synthesized to investigate their physical properties and device performance in thin‐film transistors and photovoltaic cells. 11‐Butyltricosane (S3) and 11‐heptyltricosane (S6) groups were used as side‐chain moieties tethered to isoindigo units. The linking groups between the polymer backbone and bifurcation point in the branched side chain differ in the two polymers (i.e., PIDTE‐S3 and PIDTE‐S6 ). The polymers bearing S6 side chains showed much better charge transport behavior than those with S3 side chains. Thermally annealed PIDTE‐S6 film exhibited an outstanding hole mobility of 4.07 cm² V^?1 s^?1 under ambient conditions. Furthermore, bulk heterojunction organic photovoltaic cells made from a blend film of PIDTE‐S3 and (6,6)‐phenyl C61‐butyric acid methyl ester demonstrated promising device performance with a power conversion efficiency in the range of 4.9–5.0%. © 2015 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 2015 , 53, 1226–1234     

Spontaneous formation of hierarchical proton‐conductive structures in sulfonated poly(p‐phenylene terephthalamide) copolymer films

Two partially sulfonated copolymers of poly(p‐phenylene terephthalamide) were studied; the sulfonated diamine to nonsulfonated diamine ratios were x = 1 and x = 2. Polymer solutions in water demonstrated lyotropic liquid‐crystalline behavior, with the critical concentration for nematic phase formation being around 0.7 wt %. Films of these copolymers could be considered for fuel‐cell applications. The in‐plane proton conductivities were of the order of 10^?3 to 10^?2 S cm^?1 between 20 and 90 °C. Increasing the sulfonation level resulted in a more conductive material. Spontaneous alignment of the polymer occurred during film formation, as revealed by X‐ray diffraction. Scattering along the polymer backbone was observed perpendicular to the film, implying that the polymer chains were homeotropically aligned with respect to the film. The average degree of alignment was determined to be 0.66 and 0.77 for x = 1 and x = 2, respectively. Evidence of secondary layering within the plane of the film was seen in SEM images. These layers could provide a pathway for proton conduction to occur within the plane of the film. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 666–676, 2007     

Side‐Chain Engineering of Benzodithiophene‐Fluorinated Quinoxaline Low‐Band‐Gap Co‐polymers for High‐Performance Polymer Solar Cells

A new series of donor–acceptor co‐polymers based on benzodithiophene and quinoxaline with various side chains have been developed for polymer solar cells. The effect of the degree of branching and dimensionality of the side chains were systematically investigated on the thermal stability, optical absorption, energy levels, molecular packing, and photovoltaic performance of the resulting co‐polymers. The results indicated that the linear and 2D conjugated side chains improved the thermal stabilities and optical absorptions. The introduction of alkylthienyl side chains could efficiently lower the energy levels compared with the alkoxyl‐substituted analogues, and the branched alkoxyl side chains could deepen the HOMO levels relative to the linear alkoxyl chains. The branched alkoxyl groups induced better lamellar‐like ordering, but poorer face‐to‐face packing behavior. The 2D conjugated side chains had a negative influence on the crystalline properties of the co‐polymers. The performance of the devices indicated that the branched alkoxyl side chains improved the V_oc, but decreased the J_sc and fill factor (FF). However, the 2D conjugated side chains would increase the V_oc, J_sc, and FF simultaneously. For the first time, our work provides insight into molecular design strategies through side‐chain engineering to achieve efficient polymer solar cells by considering both the degree of branching and dimensionality.     

A comparison of the properties of two structurally equivalent but regiochemically different mono‐alkylated polybithiophenes prepared through AABB‐type stille polycondensation

Previous routes to polymers with mono‐alkylated bithiophenes have proceeded through polymerization of monoalkyl‐2,2′‐bithiophene monomers through oxidative or AB‐type cross‐coupling polymerizations. The resulting polymer regiochemistry affects both the location and orientation of the polymer side‐chains. In contrast, AABB‐type cross‐coupling polymerizations can control the location and in some cases the orientation of the side‐chains. To study how this control can impact polymer properties, two poly(monodecyl‐2,2′‐bithiophene) polymers have been synthesized through Stille AABB‐type polycondensations of 2,5‐bis(trimethylstannyl)thiophene with different monomers. The alkyl side‐chains are located on every other thiophene, but polymer 1 consists of both head‐to‐tail and head‐to‐head dyads, whereas polymer 2 is made up of only head‐to‐head dyads. ¹H NMR, ¹³C NMR, and heteronuclear single quantum correlation spectroscopy are used to confirm and contrast the polymer regiochemistries. The physical properties of the two polymers are analyzed using UV–vis spectroscopy, differential scanning calorimetry, and grazing‐incidence X‐ray diffraction. Polymer 2 is found to display significantly more aggregation in solution than 1, and it displays different thermal properties. The film properties of polymers 1 and 2, however, are very similar, with nearly identical UV–vis profiles and d‐spacing values as determined by grazing incidence X‐ray diffraction. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Per‐Substituted [8]Circulene and Its Non‐Planar Fragments: Synthesis,Structural Analysis,and Properties

The syntheses, structures, and physical properties of a full series of benzannulated tetraphenylenes are reported. The palladium‐catalyzed annulation of tetraiodo‐substituted 2,3,6,7,10,11,14,15‐octamethyltetraphenylene with insufficient di(4‐anisyl)ethyne yielded a mixture of per‐substituted [8]circulene and its non‐planar fragments, including mono‐, para‐di‐, ortho‐di‐, and triannulated products. Their structures were unambiguously verified by X‐ray crystallography. Successive benzannulations significantly affect the molecular geometries, dynamic behaviors, and physical properties of the compounds. In this series of compounds, [8]circulene is the most strained one, as reflected by the significant deplanarization of the phenanthrene moieties (ca. 63° in the bay region) and the fact that it has the highest strain energy (120.6 kcal mol^?1). The dynamic behaviors of these compounds were examined both experimentally and theoretically. The ring flipping of per‐substituted [8]circulene is confirmed to proceed through pseudorotation with a barrier of around 21 kcal mol^?1, whereas its non‐planar fragments require much more energy for the ring inversion. The photophysical and electrochemical properties of the investigated compounds depend strongly on the extent of efficient π conjugation. The successive benzannulations red‐shift both the absorption and the emission bands, and reduce the first oxidation potential.