Pd‐catalyzed C‐H Arylation: A General Route for the Synthesis of Benzo[b]carbazolenaphthoquinones

A short, efficient and general methodology for benzo[b ]carbazolenaphthoquinones was developed via Pd‐catalyzed C‐H arylation process. This methodology was successfully applied to the synthesis of highly biologically active compound 5H–benzo[b ]carbazole‐6,11‐diones. Additionally, one‐pot synthesis of benzo[b ]phenazine‐6,11(5H,12H)‐dione derivatives was also explored in aqueous medium.     

Synthesis and Structure–Property Relationships of 2,2′‐Bis(benzo[b]phosphole) and 2,2′‐Benzo[b]phosphole–Benzo[b]heterole Hybrid π Systems

The first comprehensive study of the synthesis and structure–property relationships of 2,2′‐bis(benzo[b]phosphole)s and 2,2′‐benzo[b]phosphole–benzo[b]heterole hybrid π systems is reported. 2‐Bromobenzo[b]phosphole P‐oxide underwent copper‐assisted homocoupling (Ullmann coupling) and palladium‐catalyzed cross‐coupling (Stille coupling) to give new classes of benzo[b]phosphole derivatives. The benzo[b]phosphole–benzo[b]thiophene and ‐indole derivatives were further converted to P,X‐bridged terphenylenes (X=S, N) by a palladium‐catalyzed oxidative cycloaddition reaction with 4‐octyne through the C_β? H activation. X‐ray analyses of three compounds showed that the benzo[b]phosphole‐benzo[b]heterole derivatives have coplanar π planes as a result of the effective conjugation through inter‐ring C? C bonds. The π–π* transition energies and redox potentials of the cis and trans isomers of bis(benzo[b]phosphole) P‐oxide are very close to each other, suggesting that their optical and electrochemical properties are little affected by the relative stereochemistry at the two phosphorus atoms. The optical properties of the benzo[b]phosphole–benzo[b]heterole hybrids are highly dependent on the benzo[b]heterole subunits. Steady‐state UV/Vis absorption/fluorescence spectroscopy, fluorescence lifetime measurements, and theoretical calculations of the non‐fused and acetylene‐fused benzo[b]phosphole–benzo[b]heterole π systems revealed that their emissive excited states consist of two different conformers in rapid equilibrium.     

Heterogeneous Versus Homogeneous Palladium Catalysts for Ligandless Mizoroki–Heck Reactions: A Comparison of Batch/Microwave and Continuous‐Flow Processing

Mizoroki–Heck couplings of aryl iodides and bromides with butyl acrylate were investigated as model systems to perform transition‐metal‐catalyzed transformations in continuous‐flow mode. As a suitable ligandless catalyst system for the Mizoroki–Heck couplings both heterogeneous and homogeneous Pd catalysts (Pd/C and Pd acetate) were considered. In batch mode, full conversion with excellent selectivity for coupling was achieved applying high‐temperature microwave conditions with Pd levels as low as 10^?3 mol %. In continuous‐flow mode with Pd/C as a catalyst, significant Pd leaching from the heterogeneous catalyst was observed as these Mizoroki–Heck couplings proceed by a homogeneous mechanism involving soluble Pd colloids/nanoparticles. By applying low levels of Pd acetate as homogeneous Pd precatalyst, successful continuous‐flow Mizoroki–Heck transformations were performed in a high‐temperature/pressure flow reactor. For both aryl iodides and bromides, high isolated product yields of the cinnamic esters were obtained. Mechanistic issues involving the Pd‐catalyzed Mizoroki–Heck reactions are discussed.     

Diversity‐Oriented Synthesis of Substituted Benzo[b]thiophenes and Their Hetero‐Fused Analogues through Palladium‐Catalyzed Oxidative CH Functionalization/Intramolecular Arylthiolation

An efficient, high yielding route to multisubstituted benzo[b]thiophenes has been developed through palladium‐catalyzed intramolecular oxidative C?H functionalization–arylthiolation of enethiolate salts of α‐aryl‐β‐(het)aryl/alkyl‐β‐mercaptoacrylonitriles/acrylates or acrylophenones. The overall strategy involves a one‐pot, two‐step process in which enethiolate salts [generated in situ through base‐mediated condensation of substituted arylacetonitriles, deoxybenzoins, or arylacetates with (het)aryl (or alkyl) dithioates] are subjected to intramolecular C?H functionalization–arylthiolation under the influence of a palladium acetate (or palladium chloride)/cupric acetate catalytic system and tetrabutylammonium bromide as additive in N,N‐dimethylformamide (DMF) as solvent. In a few cases, the yields of benzo[b]thiophenes were better in a two‐step process by employing the corresponding enethiols as substrates. In a few examples, Pd(OAc)₂ (or PdCl₂) catalyst in the presence of oxygen was found to be more efficient than cupric acetate as reoxidant, furnishing benzothiophenes in improved yields by avoiding formation of side products. The method is compatible with a diverse range of substituents on the aryl ring as well as on the 2‐ and 3‐positions of the benzothiophene scaffold. The protocol could also be extended to the synthesis of a raloxifene precursor and a tubulin polymerization inhibitor in good yields. The versatility of this newly developed method was further demonstrated by elaborating it for the synthesis of substituted thieno‐fused heterocycles such as thieno[2,3‐b]thiophenes, thieno[2,3‐b]indoles, thieno[3,2‐c]pyrazole, and thieno[2,3‐b]pyridines in high yields. A probable mechanism involving intramolecular electrophilic arylthiolation via either a Pd‐S adduct or palladacycle intermediate has been proposed on the basis of experimental studies.     

Palladium‐Catalyzed Domino CH/NH Functionalization: An Efficient Approach to Nitrogen‐Bridged Heteroacenes

Palladium‐catalyzed domino C?H/N?H functionalization for the synthesis of novel nitrogen‐bridged thienoacenes and 10H‐benzo[4,5]thieno[3,2‐b]indole derivatives from dihaloarene is reported. This domino sequence consists of initial C?H functionalization of the benzo[b]thiophene moiety, followed by Buchwald–Hartwig coupling. This transformation is also useful for the synthesis of highly π‐extended compounds.     

Ruthenium‐Catalyzed Oxidative Coupling of Primary Amines with Internal Alkynes through CH Bond Activation: Scope and Mechanistic Studies

The oxidative coupling of primary amines with internal alkynes catalyzed by Ru complexes is presented as a general atom‐economy methodology with a broad scope of applications in the synthesis of N‐heterocycles. Reactions proceed through regioselective C?H bond activation in 15 minutes under microwave irradiation or in 24 hours with conventional heating. The synthesis of 2,3,5‐substituted pyridines, benzo[h]isoquinolines, benzo[g]isoquinolines, 8,9‐dihydro‐benzo[de]quinoline, 5,6,7,8‐tetrahydroisoquinolines, pyrido[3,4g]isoquinolines, and pyrido[4,3g]isoquinolines is achievable depending on the starting primary amine used. DFT calculations on a benzylamine substrate support a reaction mechanism that consists of acetate‐assisted C?H bond activation, migratory‐insertion, and C?N bond formation steps that involve 28–30 kcal mol^?1. The computational study is extended to additional substrates, namely, 1‐naphthylmethyl‐, 2‐methylallyl‐, and 2‐thiophenemethylamines.     

金催化的炔烃羟基化反应: 合成2取代苯并呋喃化合物

本文报道了一种以邻炔基苯酚为原料,通过金催化的炔烃羟基化反应合成2取代苯并呋喃的方法. 该方法可以在温和的条件下快速以高产率得到各种2取代苯并呋喃. 关键前体邻炔基苯酚可以很容易由Sonogashira 反应制备.     

Benzo[a]heptalenes from Heptaleno[1,2‐c]furans. Part 2

It is shown in this ‘Part 2’ that heptaleno[1,2‐c]furans 1 react thermally in a Diels–Alder‐type [4+2] cycloaddition at the furan ring with vinylene carbonate (VC), phenylsulfonylallene (PSA), α‐(acetyloxy)acrylonitrile (AAN), and (1Z)‐1,2‐bis(phenylsulfonyl)ethene (ZSE) to yield the corresponding 1,4‐epoxybenzo[d]heptalenes (cf. Schemes 1, 5, 6, and 8). The thermal reaction of 1a and 1b with VC at 130° and 150°, respectively, leads mainly to the 2,3‐endo‐cyclocarbonates 2,3‐endo‐ 2a and ‐ 2b and in minor amounts to the 2,3‐exo‐cyclocarbonates 2,3‐exo‐ 2a and ‐ 2b . In some cases, the (P*)‐ and (M*)‐configured epimers were isolated and characterized (Scheme 1). Base‐catalyzed cleavage of 2,3‐endo‐ 2 gave the corresponding 2,3‐diols 3 , which were further transformed via reductive cleavage of their dimesylates 4 into the benzo[a]heptalenes 5a and 5b , respectively (Scheme 2). In another reaction sequence, the 2,3‐diols 3 were converted into their cyclic carbonothioates 6 , which on treatment with (EtO)₃P gave the deoxygenated 1,4‐dihydro‐1,4‐epoxybenzo[d]heptalenes 7 . These were rearranged by acid catalysis into the benzo[a]heptalen‐4‐ols 8a and 8b , respectively (Scheme 2). Cyclocarbonate 2,3‐endo‐ 2b reacted with lithium diisopropylamide (LDA) at ?70° under regioselective ring opening to the 3‐hydroxy‐substituted benzo[d]heptalen‐2‐yl carbamate 2,3‐endo‐ 9b (Scheme 3). The latter was O‐methylated to 2,3‐endo‐(P*)‐ 10b . The further way, to get finally the benzo[a]heptalene 13b with MeO groups in 1,2,3‐position, could not be realized due to the fact that we found no way to cleave the carbamate group of 2,3‐endo‐(P*)‐ 10b without touching its 1,4‐epoxy bridge (Scheme 3). The reaction of 1a with PSA in toluene at 120° was successful, in a way that we found regioisomeric as well as epimeric cycloadducts (Scheme 5). Unfortunately, the attempts to rearrange the products under strong‐base catalysis as it had been shown successfully with other furan–PSA adducts were unsuccessful (Scheme 4). The thermal cycloaddition reaction of 1a and 1b with AAN yielded again regioisomeric and epimeric adducts, which could easily be transformed into the corresponding 2‐ and 3‐oxo products (Scheme 6). Only the latter ones could be rearranged with Ac₂O/H₂SO₄ into the corresponding benzo[a]heptalene‐3,4‐diol diacetates 20a and 20b , respectively, or with trimethylsilyl trifluoromethanesulfonate (TfOSiMe₃/Et₃N), followed by treatment with NH₄Cl/H₂O, into the corresponding benzo[a]heptalen‐3,4‐diols 21a and 21b (Scheme 7). The thermal cycloaddition reaction of 1 with ZSE in toluene gave the cycloadducts 2,3‐exo‐ 22a and ‐ 22b as well as 2‐exo,3‐endo‐ 22c in high yields (Scheme 8). All three adducts eliminated, by treatment with base, benzenesulfinic acid and yielded the corresponding 3‐(phenylsulfonyl)‐1,4‐epoxybenzo[d]heptalenes 25 . The latter turned out to be excellent Michael acceptors for H₂O₂ in basic media (Scheme 9). The Michael adducts lost H₂O on treatment with Ac₂O in pyridine and gave the 3‐(phenylsulfonyl)benzo[d]heptalen‐2‐ones 28a and 3‐exo‐ 28b , respectively. Rearrangement of these compounds in the presence of Ac₂O/AcONa lead to the formation of the corresponding 3‐(phenylsulfonyl)benzo[a]heptalene‐1,2‐diol diacetates 30a and 30b , which on treatment with MeONa/MeI gave the corresponding MeO‐substituted compounds 31a and 31b . The reductive elimination of the PhSO₂ group led finally to the 1,2‐dimethoxybenzo[a]heptalenes 32a and 32b . Deprotonation experiments of 32a with t‐BuLi/N,N,N′,N′‐tetramethylethane‐1,2‐diamine (tmeda) and quenching with D₂O showed that the most acid C? H bond is H? C(3) (Scheme 9). Some of the new structures were established by X‐ray crystal‐diffraction analyses (cf. Figs. 1, 3, 4, and 5). Moreover, nine of the new benzo[a]heptalenes were resolved on an anal. Chiralcel OD‐H column, and their CD spectra were measured (cf. Figs. 8 and 9). As a result, the 1,2‐dimethoxybenzo[a]heptalenes 32a and 32b showed unexpectedly new Cotton‐effect bands just below 300 nm, which were assigned to chiral exciton coupling between the heptalene and benzo part of the structurally highly twisted compounds. The PhSO₂‐substituted benzo[a]heptalenes 30b and 31b showed, in addition, a further pair of Cotton‐effect bands in the range of 275–245 nm, due to chiral exciton coupling of the benzo[a]heptalene chromophore and the phenylsulfonyl chromophore (cf. Fig. 10).     

Efficient Synthetic Approach to Substituted Benzo[b]furans and Benzo[b]thiophenes by Iodine‐Promoted Cyclization of Enaminones

An efficient synthetic approach to the substituted benzo[b]furan and benzo[b]thiophene scaffolds by iodine‐mediated cyclization of the corresponding enaminones is described. This protocol was applied to a large series of these latter precursors to afford the respective benzoheterocycles substituted at the C‐2 position by a carbonyl group functionality. A study of the factors that control this process reveals that the reactivity depends on the presence of electron‐donor groups in the aryl ring of the aryloxycarbonylic and arylthiocarbonylic moieties.     

Rhodium(III)‐Catalyzed Tandem [2+2+2] Annulation–Lactamization of Anilides with Two Alkynoates via Cleavage of Two Adjacent C−H or C−H/C−O bonds

An electron‐deficient Cp^E rhodium(III) complex bearing a cyclopentadienyl ligand with two ethyl ester substituents catalyzes the tandem [2+2+2] annulation–lactamization of acetanilides with two alkynoates via cleavage of adjacent two C?H bonds to give densely substituted benzo[cd]indolones. The reactions of meta‐methoxy‐substituted acetanilides with two alkynoates also provided benzo[cd]indolones via cleavage of adjacent C?H/C?O bonds. Furthermore, 3,5‐dimethoxyacetanilides reacted with two alkynoates to give dearomatized spiro compounds.     

An Efficient Synthesis of Pyrrolo[1,2‐a] or Pyrido[1,2‐a]benzo[4,5]imidazo[1,2‐c]quinazoline Derivatives in Ionic Liquids Catalyzed by Iodine

2‐(1H ‐benzo[d ]imidazol‐2‐yl)anilines reacted with haloketones including 5‐chloropentan‐2‐one and 6‐chlorohexan‐2‐one catalyzed by iodine, giving benzo[4,5]imidazo[1,2‐c ]pyrrolo[1,2‐a ]quinazoline and 6H ‐benzo[4,5]imidazo[1,2‐c ]pyrido[1,2‐a ]quinazoline derivatives, respectively. This domino‐type reaction formed two new heterocycles and three new covalent bonds in one‐pot procedure and provided a green method for the synthesis of fused pentacyclic heterocycles bearing both quinazoline and benzimidazole moieties in ionic liquids.     

Nickel‐Catalyzed Mizoroki–Heck‐ versus Michael‐Type Addition of Organoboronic Acids to α,β‐Unsaturated Alkenes through Fine‐Tuning of Ligands

Various arylboronic acids reacted with activated alkenes in the presence of [Ni(dppe)Br₂], ZnCl₂, and H₂O in CH₃CN at 80 °C to give the corresponding Mizoroki–Heck‐type addition products in good to excellent yields. Furthermore, 1 equivalent of the hydrogenation product of the activated alkene was also produced. By tuning the ligands of the nickel complexes and the reaction conditions, Michael‐type addition was achieved in a very selective manner. Thus, various p‐ and o‐substituted arylboronic acids or alkenylboronic acid reacted smoothly with activated alkenes in CH₃CN at 80 °C for 12 h catalyzed by Ni(acac)₂, P(o‐anisyl)₃, and K₂CO₃ to give the corresponding Michael‐type addition products in excellent yields. However, for m‐substituted arylboronic acids, the yields of Michael‐type addition products are very low. The cause of this unusual meta‐substitution effect is not clear. By altering the solvent or phosphine ligand, the product yields for m‐substituted arylboronic acids were greatly improved. In contrast to previous results in the literature, the present catalytic reactions required water for Mizoroki–Heck‐type products and dry reaction conditions for Michael‐type addition products. Possible mechanistic pathways for both addition reactions are proposed.     

Rh(III)‐Catalyzed Denitrogenative [4+2] Annulation of Benzamides and 3‐Diazoindolin‐2‐imines: Expedient Access to Indolo[2,3‐c] isoquinolin‐5‐ones

An effective and pragmatic strategy for the synthesis of structurally diverse indolo[2,3‐c]isoquinolin‐5‐ones has been developed via a Rh(III)‐catalyzed C?H activation and [4+2] annulation reaction of N‐methoxybenzamides and 3‐diazoindolin‐2‐imines. The reaction involves the efficient formation of two new (one C?C and one C?N) bonds under operationally simple conditions and has the benefits of a broad substrate scope.     

Iridium‐Catalyzed Annulation Reactions of Thiophenes with Carboxylic Acids: Direct Evidence for a Heck‐type Pathway

The functionalization of thiophenes is a fundamental and important reaction. Herein, we disclose iridium‐catalyzed one‐pot annulation reactions of (benzo)thiophenes with (hetero)aromatic or α,β‐unsaturated carboxylic acids, which afford thiophene‐fused coumarin‐type frameworks. Dearomatization reactions of 2‐substituted thiophenes with α,β‐unsaturated carboxylic acids deliver various thiophene‐containing spirocyclic products. The occurrence of two interconnected reactions provides direct evidence for a Heck‐type pathway. The mechanistic scenario described herein is distinctly different from the S_EAr and concerted metalation–protodemetalation (CMD) pathways encountered in the well‐described oxidative C?H/C?H cross‐coupling reactions of thiophenes with other heteroarenes.     

Rhodium‐Catalyzed Enantioselective Oxidative [3+2] Annulation of Arenes and Azabicyclic Olefins through Twofold C−H Activation

C?H bond activation is mostly limited to ortho selectivity. Activation of both ortho and meta C?H bonds constitutes a particularly important strategy for annulation, but has rarely been studied in enantioselective systems. Reported herein is rhodium(III)‐catalyzed asymmetric [3+2] transannulation of arenes with 7‐azabenzonorbornadienes. Two distinct classes of arenes have been identified as substrates, and the coupling proceeded with high enantioselectivity and excellent diastereoselectivity through sequential activation of ortho and meta C?H bonds.     

One‐Pot Synthesis of Highly Fluorescent Pyrido[1,2‐a]indole Derivatives through CH/NH Activation: Photophysical Investigations and Application in Cell Imaging

We describe a straightforward strategy for the synthesis of strongly fluorescent pyridoindoles by Pd‐catalyzed oxidative annulations of internal alkynes with C‐3 functionalized indoles through C?H/N?H bond activation in a one‐pot tandem process. Mechanistic investigations reveal the preferential activation of N?H indole followed by C?H activation during the cyclization process. Photophysical properties of pyridoindoles exhibited the highest fluorescence quantum yield of nearly 80 %, with emission color varying from blue to green to orange depending on the substructures. Quantum mechanical calculations provide insights into the observed photophysical properties. The strong fluorescence of the pyrido[1,2‐a]indole derivative has been employed in subcellular imaging, which demonstrates its localization in the cell nucleus.     

Synthesis and Characterization of Thienothiophene Conjugated Benzo[c]Thiophene Analogs

Syntheses of thienothiophene tethered benzo[c]thiophene analogs starting from thienothiophenyl lactone are reported. The benzo[c]thiophenes containing thienothiophene unit upon Vilsmeier–Haack formylation followed by condensation with malononitrile/thiophene‐2‐acetonitrile furnished corresponding cyano‐vinylenes. Optical and electrochemical properties of thienothiophene conjugated benzo[c]thiophene analogs are correlated with their structures.     

Synthesis of Some New Benzo[b][1,4]diazepine Based Heterocycles

Preparation of 4‐chloro‐3H‐benzo[b][1,4]diazepine‐2‐carbaldehyde 5 , which is used as a key intermediate in the synthesis of chalcones derivatives, via its condensation with some aromatic acetophenone derivatives under ethanol piperidine condition was described. Also illustrated was the reaction of such chalcones with available nucleophilics and reagents of active methylene group to afford new series of fused and isolated pyrazoles, isoxazolines pyrimidines, pyridines, triazolo[1,5‐a]pyrimidines, benzo[1,4]oxa(thia)zepines, and pyrido[1,2‐a]benzimidazoles incorporating 4‐chloro‐3H‐benzo[b][1,4]diazepine moiety, which have a potential pharmaceutical interest. Furthermore, condensation reaction of 4‐chloro‐3H‐benzo[b][1,4]diazepine‐2‐carbaldehyde with aromatic amine derivatives to afford the Schiff's bases was described. The C═N double bond of the latter compounds has been reacted with chloroketene to give β‐lactams and with sulfanylacetic acid to give the 2‐(4‐oxo‐1,3‐thiazolidinyl)‐substituted derivative. The structures of the newly prepared compounds were established by elemental analysis, IR, MS, and ¹H NMR spectral analysis.     

Synthesis and Reactions of Some New Benzo[a]phenothiazine‐3,4‐dione Derivatives

The reaction of 2,3‐dihydro‐2,3‐epoxy‐1,4‐naphthoquinone ( 4 ) with substituted anilines furnished the corresponding benzo[fused]heterocyclic derivatives 5 , 6 , 6a , 6b , 7 , 8 . Furthermore, treatment of benzo[a]phenothiazine derivative 7 with halo compounds, namely, ethyl bromoacetate, phenacyl bromide, dibromoethane, or chloroacetone afforded ether derivatives 11 , 12 , 13 , 14 , respectively. Moreover, the reaction of 11 with o‐substituted aniline gave the corresponding benzo[a]phenothiazin‐5‐one derivatives 15 , 16 , 17 and benzo[d][1,3]oxazin‐4‐one 18 , respectively. Finally, the chromenone derivative 19 was synthesized via the reaction of ester derivative 11 with salicyaldhyde in refluxing pyridine. The newly synthesized compounds were characterized by spectroscopic measurements (IR, ¹H NMR, ¹³C NMR, and mass spectra).     

Iron‐Carbonyl‐Catalyzed Redox‐Neutral [4+2] Annulation of N−H Imines and Internal Alkynes by C−H Bond Activation

Stoichiometric C?H bond activation of arenes mediated by iron carbonyls was reported by Pauson as early as in 1965, yet the catalytic C?H transformations have not been developed. Herein, an iron‐catalyzed annulation of N?H imines and internal alkynes to furnish cis‐3,4‐dihydroisoquinolines is described, and represents the first iron‐carbonyl‐catalyzed C?H activation reaction of arenes. Remarkablely, this is also the first redox‐neutral [4+2] annulation of imines and alkynes proceeding by C?H activation. The reaction also features only cis stereoselectivity and excellent atom economy as neither base, nor external ligand, nor additive is required. Experimental and theoretical studies reveal an oxidative addition mechanism for C?H bond activation to afford a dinuclear ferracycle and a synergetic diiron‐promoted H‐transfer to the alkyne as the turnover‐determining step.