Initiator effect on the cationic ring‐opening copolymerization of 2‐ethyl‐2‐oxazoline and 2‐phenyl‐2‐oxazoline

The aim of this research was to study the effect of the initiator on the resulting monomer distribution for the cationic ring‐opening copolymerization of 2‐ethyl‐2‐oxazoline (EtOx) and 2‐phenyl‐2‐oxazoline (PhOx). At first, kinetic studies were performed for the homopolymerizations of both monomers at 160 °C under microwave irradiation using four initiators. These initiators have the same benzyl‐initiating group but different leaving groups, Cl^?, Br^?, I^?, and OTs^?. The basicity of the leaving group affects the ratio of covalent and cationic propagating species and, thus, the polymerization rate. The observed differences in polymerization rates could be correlated to the concentration of cationic species in the polymerization mixture as determined by ¹H NMR spectroscopy. In a next‐step, polymerization kinetics were determined for the copolymerizations of EtOx and PhOx with these four initiators. The reactivity ratios for these copolymerizations were calculated from the polymerization rates obtained for the copolymerizations. This approach allows more accurate determination of the copolymerization parameters compared to conventional methods using the composition of single polymers. When benzyl chloride (BCl) was used as an initiator, no copolymers could be obtained because its reactivity is too low for the polymerization of PhOx. With decreasing basicity of the used counterions (Br^? > I^? > OTs^?), the reactivity ratios gradually changed from r_EtOx = 10.1 and r_PhOx = 0.30 to r_EtOx = 7.9 and r_PhOx = 0.18. However, the large difference in reactivity ratios will lead to the formation of quasi‐diblock copolymers in all cases. In conclusion, the used initiator does influence the monomer distribution in the copolymers, but for the investigated system the differences were so small that no difference in the resulting polymer properties is expected. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4804–4816, 2008     

Expanded‐Ring N‐Heterocyclic Carbenes Efficiently Stabilize Gold(I) Cations,Leading to High Activity in π‐Acid‐Catalyzed Cyclizations

A series of six‐ and seven‐membered expanded‐ring N‐heterocyclic carbene (er‐NHC) gold(I) complexes has been synthesized using different synthetic approaches. Complexes with weakly coordinating anions [(er‐NHC)AuX] (X^?=BF₄^?, NTf₂^?, OTf^?) were generated in solution. According to their ¹³C NMR spectra, the ionic character of the complexes increases in the order X^?=Cl^?<NTf₂^?<OTf^?<BF₄^?. Additional factors for stabilization of the cationic complexes are expansion of the NHC ring and the attachment of bulky substituents at the nitrogen atoms. These er‐NHCs are bulkier ligands and stronger electron donors than conventional NHCs as well as phosphines and sulfides and provide more stabilization of [(L)Au⁺] cations. A comparative study has been carried out of the catalytic activities of five‐, six‐, and seven‐membered carbene complexes [(NHC)AuX], [(Ph₃P)AuX], [(Me₂S)AuX], and inorganic compounds of gold in model reactions of indole and benzofuran synthesis. It was found that increased ionic character of the complexes was correlated with increased catalytic activity in the cyclization reactions. As a result, we developed an unprecedentedly active monoligand cationic [(THD‐Dipp)Au]BF₄ (1,3‐bis(2,6‐diisopropylphenyl)‐3,4,5,6‐tetrahydrodiazepin‐2‐ylidene gold(I) tetrafluoroborate) catalyst bearing seven‐membered‐ring carbene and bulky Dipp substituents. Quantitative yields of cyclized products were attained in several minutes at room temperature at 1 mol % catalyst loadings. The experimental observations were rationalized and fully supported by DFT calculations.     

Influences of steric bulkiness in hydrotris(pyrazolyl)borate ligands on ethylene polymerization reaction

Manganese(II) complex catalysts with hydrotris(pyrazolyl)borate ligands have been examined on their catalytic performance in ethylene polymerization and ethylene/1‐hexene copolymerization. The activities of [Mn(L6)(Cl)(NCMe)] ( 1 ) and [Mn(L10)(Cl)] ( 2 ) activated by Al(i‐Bu)₃/[Ph₃C][B(C₆F₅)₄] for ethylene polymerization go up to 326 and 11 kg mol (cat^?1) h^?1, respectively, (L6^? = hydrotris(3‐phenyl‐5‐methyl‐1‐pyrazolyl)borate anion, L10^? = hydrotris(3‐adamantyl‐5‐isopropyl‐1‐pyrazolyl)borate anion). In particular, for ethylene/1‐hexene copolymerization, complex 1 gives high‐molecular‐weight poly(ethylene‐co‐1‐hexene)s with the highest M_w of 439,000 in manganese olefin polymerization catalyst systems. Moreover, the 1‐hexene incorporation by complex 1 seems more efficient than that by [Mn(L3)(Cl)] ( 4 ) (L3^? = hydrotris(3‐tertiary butyl‐5‐isopropyl‐1‐pyrazolyl)borate anion). In this work, we demonstrated that the coordination geometry and coordination number are also important factors for ethylene polymerization reaction as well as steric hindrances and ligand frameworks in our manganese(II) catalysts. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5720–5727, 2009     

Gutmann's Donor Numbers Correctly Assess the Effect of the Solvent on the Kinetics of SNAr Reactions in Ionic Liquids

We report an experimental study on the effect of solvents on the model S_NAr reaction between 1‐chloro‐2,4‐dinitrobenzene and morpholine in a series of pure ionic liquids (IL). A significant catalytic effect is observed with reference to the same reaction run in water, acetonitrile, and other conventional solvents. The series of IL considered include the anions, NTf₂^?, DCN^?, SCN^?, CF₃SO₃^?, PF₆^?, and FAP^? with the series of cations 1‐butyl‐3‐methyl‐imidazolium ([BMIM]⁺), 1‐ethyl‐3‐methyl‐imidazolium ([EMIM]⁺), 1‐butyl‐2,3‐dimethyl‐imidazolium ([BM₂IM]⁺), and 1‐butyl‐1‐methyl‐pyrrolidinium ([BMPyr]⁺). The observed solvent effects can be attributed to an “anion effect”. The anion effect appears related to the anion size (polarizability) and their hydrogen‐bonding (HB) abilities to the substrate. These results have been confirmed by performing a comparison of the rate constants with Gutmann's donicity numbers (DNs). The good correlation between rate constants and DN emphasizes the major role of charge transfer from the anion to the substrate.     

Disproportionation of hydrogen peroxide in the presence of Mn(III) complexes with various porphyrins and acid anions

The kinetics of homogeneous decomposition of H₂O₂ in the presence of Mn(III) complexes with octaethylporphine or meso-phenyloctaethylporphines and acid anions Cl^?, AcO^?, and SCN^? was studied by volumetry. The ionic-molecular mechanism of the transformation, involving reversible coordination of the H₂O₂ molecule, its irreversible decomposition with the release of H₂O and removal of two electrons from the metal porphyrin, reversible coordination of the second peroxide molecule in the form of HO ₂ ^? , and slow irreversible reduction of the catalyst with the release of O₂ and H₂O was substantiated by electronic absorption spectra. The catalytic activity of Mn(III) porphyrin complexes is independent of the acid anion present as extra ligand, but depends on the structure of the porphyrin ligand, which can be used for controlling the catalytic activity. Unsymmetrical (chloro)(monophenyloctaethylporphinato)managanese(III) is the most active; it increases the rate of O₂ evolution by a factor of 2 at the peroxide: catalyst molar ratio of (3 × 10⁵): 1.     

Ionic Polymer Microspheres Bearing a CoIII–Salen Moiety as a Bifunctional Heterogeneous Catalyst for the Efficient Cycloaddition of CO2 and Epoxides

We report a unique strategy to obtain the bifunctional heterogeneous catalyst TBB‐Bpy@Salen‐Co (TBB=1,2,4,5‐tetrakis(bromomethyl)benzene, Bpy=4,4’‐bipyridine, Salen‐Co=N,N’‐bis({4‐dimethylamino}salicylidene)ethylenediamino cobalt(III) acetate) by combining a cross‐linked ionic polymer with a Co^III–salen Schiff base. The catalyst showed extra high activity for CO₂ fixation under mild, solvent‐free reaction conditions with no requirement for a co‐catalyst. The synthesized catalyst possessed distinctive spherical structural features, abundant halogen Br^? anions with good leaving group ability, and accessible Lewis acidic Co metal centers. These unique features, together with the synergistic role of the Co and Br^? functional sites, allowed TBB‐Bpy@Salen‐Co to exhibit enhanced catalytic conversion of CO₂ into cyclic carbonates relative to the corresponding monofunctional analogues. This catalyst can be easily recovered and recycled five times without significant leaching of Co or loss of activity. Moreover, based on our experimental results and previous work, a synergistic cycloaddition reaction mechanism was proposed.     

Regulation of Catalytic Activity by Phosphine Ligand Design

Abstract

Starting with the catalytic complex [Rh(PPh₃)₃Cl], the influence of variation of phosphine ligand properties on the activity of rhodium phosphine complexes as catalysts for the hydrogenation of olefins was systematically studied. The following catalyst modifications were examined (a) varying the basicity of the triarylphosphine ligands, (b) replacing Cl^? by a non-coordinating anion (BF₄ ^?) to make the catalyst cationic, (c) substituting a chelating diphosphine for the monophosphine ligands to ensure cis-coordination, and (d) varying the chain length of the diphosphine ligand to vary the chelate ring size and flexibility. By systematic manipulation of these parameters, enhancements of catalytic activity by factors in excess of 10⁴ were achieved.     

Acenaphthenequinone based simple colorimetric anion sensor with only one binding site

Quinonehydrazone compound 1 was designed to be a simple chromogenic anion sensor with one anion binding site. The sensor 1 was easily obtained in 83% yield by the condensation of acenaphthenequinone with 4-nitrophenylhydrazine in ethanol solution. In DMSO, sensor 1 could high selectively and visually detect anions with strong basicity (e.g., AcO^?, F^? and H₂PO₄ ^?) from chloride, bromide, and iodide ions with weak basicity.     

N‐Heterocyclic Carbenes and Imidazole‐2‐thiones as Ligands for the Gold(I)‐Catalysed Hydroamination of Phenylacetylene

Gold(I) complexes of 1‐[1‐(2,6‐dimethylphenylimino)alkyl]‐3‐(mesityl)imidazol‐2‐ylidene (C^Imine_R), 1,3‐dimesitylimidazol‐2‐ylidene (IMes) and of the corresponding thione derivatives (S^Imine_R and IMesS) were prepared and structurally characterised. The solid‐state structure of the C^Imine_R and S^Imine_R gold(I) complexes showed monodentate coordination of the ligand and a dangling imine group that could bind reversibly to the metal centre to stabilise otherwise unstable catalytic intermediates. Interestingly, reaction of C^Imine_tBu with [AuCl(SMe₂)] led to the formation of [(C^Imine_tBu)AuCl], which rearranges upon crystallisation into the unusual complex cation [(C^Imine_tBu)₂Au]⁺, with AuCl₂^? as the counterion. The activity of the gold complexes in the hydroamination of phenylacetylene with substituted anilines was tested and compared to control catalyst systems. The best catalytic performance was obtained with [(C^Imine_tBu)AuCl], with the exclusive formation of the Markovnikov addition product in excellent yield (>95 %) regardless of the substituents on aniline.     

Porous Silica‐Coated Gold Nanorods: A Highly Active Catalyst for the Reduction of 4‐Nitrophenol

The successful coating of thin porous silica layers of various thicknesses [(10±1), (12±1), and (14±1) nm] on cetyl trimethylammonium bromide (CTAB) capped gold nanorods was achieved through a modified Stöber procedure. The resulting material was applied as a novel catalyst for the reduction of 4‐nitrophenol. The catalytic activities of the gold nanorods increased up to eight times after coating with a layer of porous silica and the reaction followed a zero‐order kinetics, having a rate constant as high as 2.92×10^?1 mol L^?1 min^?1. The spectral changes during the reduction reaction of 4‐nitrophenol were observed within a very short span of time and a complete conversion to 4‐aminophenol occured within 5–6 mins, including the induction period of ≈2 mins. The reusability of the catalyst was studied by running the catalytic reaction during five consecutive cycles with good efficiency without destroying the nanostructure. The methodology can be effectively applied to the development of composite catalysts with highly enhanced catalytic activity.     

Influence of dopant ion and synthesis variables on mechanical properties of polypyrrole films

Oxidized, conductive poly(pyrrolylium anion) films [poly(pyrrolylium) = PP⁺ where there exists about one cation per three pyrrole rings] have been prepared electrochemically in an effort to study the effect of counteranion structure and preparation conditions on the composition, order (crystallinity), and mechanical properties of the films. The counteranion principally employed was p-toluene-sulfonate (OTs^?), although benzenesulfonate (BZs^?), p-ethylbenzene-sulfonate (EBs^?), and p-dodecylbenzenesulfonate (DBs^?) were incorporated in several polypyrrole films. It was found that the amount of OTs^? incorporated increased with increasing potential during synthesis, suggesting a parallel increase in the extent of oxidation of the polymer. Mechanical testing of the same films demonstrated that the ultimate tensile strength decreased as the electrode potential and current density during synthesis increased. X-ray diffraction indicated that the degree of order (reflected by the widths of the diffraction lines), albeit quite small, is dependent upon the anion species and synthesis conditions. Interestingly, samples with the highest degree of order exhibit the highest electrical conductivities.     

An Isolated Zinc–Cobalt Atomic Pair for Highly Active and Durable Oxygen Reduction

A competitive complexation strategy has been developed to construct a novel electrocatalyst with Zn‐Co atomic pairs coordinated on N doped carbon support (Zn/CoN‐C). Such architecture offers enhanced binding ability of O₂, significantly elongates the O?O length (from 1.23 Å to 1.42 Å), and thus facilitates the cleavage of O?O bond, showing a theoretical overpotential of 0.335 V during ORR process. As a result, the Zn/CoN‐C catalyst exhibits outstanding ORR performance in both alkaline and acid conditions with a half‐wave potential of 0.861 and 0.796 V respectively. The in situ XANES analysis suggests Co as the active center during the ORR. The assembled zinc–air battery with Zn/CoN‐C as cathode catalyst presents a maximum power density of 230 mW cm^?2 along with excellent operation durability. The excellent catalytic activity in acid is also verified by H₂/O₂ fuel cell tests (peak power density of 705 mW cm^?2).     

Copper(I)-anilide complex [Na(phen)3][Cu(NPh2)2]: an intermediate in the copper-catalyzed N-arylation of N-phenylaniline

Complex [Na(phen)₃][Cu(NPh₂)₂] ( 2 ), containing a linear bis(N‐phenylanilide)copper(I) anion and a distorted octahedral tris(1,10‐phenanthroline)sodium counter cation, has been isolated from the catalytic C? N cross‐coupling reaction with the CuI/phen/tBuONa (phen=1,10‐phenanthroline) catalytic system. Complex 2 can react with 4‐iodotoluene to produce 4‐methyl‐N,N‐diphenylaniline ( 3 a ) with 70.6 % yield. In addition, 2 can work as an effective catalyst for C? N coupling under the same reaction conditions, thus indicating that 2 is the intermediate of the catalytic system. Both [Cu(NPh₂)₂]^? and [Cu(NPh₂)I]^? have been observed by in situ electron ionization mass spectrometry (ESI‐MS) under catalytic reaction conditions, thus confirming that they are intermediates in the reaction. A catalytic cycle has been proposed based on these observations. The molecular structure of 2 has been determined by single‐crystal X‐ray diffraction analysis.     

An Interplay of Cooperativity between Cation⋅⋅⋅π, Anion⋅⋅⋅π and C?H⋅⋅⋅Anion Interactions

Mixed cation (Li⁺, Na⁺ and K⁺) and anion (F^?, Cl^?, Br^?) complexes of the aromatic π‐surfaces (top and bottom) are studied by using dispersion‐corrected density functional theory. The selectivity of the aromatic surface to interact with a cation or an anion can be tuned and even reversed by the electron‐donating/electron‐accepting nature of the side groups. The presence of a methyl group in the ? OCH₃, ? SCH₃, ? OC₂H₅ in the side groups of the aromatic ring leads to further cooperative stabilization of the otherwise unstable/weakly stable anion???π complexes by bending of the side groups towards the anion to facilitate C? H???anion interactions. The cooperativity among the interactions is found to be as large as 100 kcal mol^?1 quantified by dissection of the three individual forces from the total interaction energy. The crystal structures of the fluoride binding tripodal and hexapodal ligands provide experimental evidence for such cooperative interactions.     

Dynamic Equilibria in Solvent‐Mediated Anion,Cation and Ligand Exchange in Transition‐Metal Coordination Polymers: Solid‐State Transfer or Recrystallisation?

The solution properties of a series of transition‐metal–ligand coordination polymers [ML(X)_n]_∞ [M=Ag^I, Zn^II, Hg^II and Cd^II; L=4,4′‐bipyridine (4,4′‐bipy), pyrazine (pyz), 3,4′‐bipyridine (3,4′‐bipy), 4‐(10‐(pyridin‐4‐yl)anthracen‐9‐yl)pyridine (anbp); X=NO₃^?, CH₃COO^?, CF₃SO₃^?, Cl^?, BF₄^?; n=1 or 2] in the presence of competing anions, metal cations and ligands have been investigated systematically. Providing that the solubility of the starting complex is sufficiently high, all the components of the coordination polymer, namely the anion, the cation and the ligand, can be exchanged on contact with a solution phase of a competing component. The solubility of coordination polymers is a key factor in the analysis of their reactivity and this solubility depends strongly on the physical properties of the solvent and on its ability to bind metal cations constituting the backbone of the coordination polymer. The degree of reversibility of these solvent‐induced anion‐exchange transformations is determined by the ratio of the solubility product constants for the starting and resultant complexes, which in turn depend upon the choice of solvent and the temperature. The extent of anion exchange is controlled effectively by the ratio of the concentrations of incoming ions to outgoing ions in the liquid phase and the solvation of various constituent components comprising the coordination polymer. These observations can be rationalised in terms of a dynamic equilibrium of ion exchange reactions coupled with Ostwald ripening of crystalline products. The single‐crystal X‐ray structures of [Ag(pyz)ClO₄]_∞ ( 1 ), {[Ag(4,4′‐bipy)(CF₃SO₃)] ? CH₃CN}_∞ ( 2 ), {[Ag(4,4′‐bipy)(CH₃CN)]ClO₄ ? 0.5 CH₃CN}_∞ ( 3 ), metal‐free anbp ( 4 ), [Ag(anbp)NO₃(H₂O)]_∞ ( 5 ), {[Cd(4,4′‐bipy)₂(H₂O)₂](NO₃)₂ ? 4 H₂O}_∞ ( 6 ) and {[Zn(4,4′‐bipy)SO₄(H₂O)₃] ? 2 H₂O}_∞ ( 7 ) are reported.     

Mechanism of the Pd‐catalyzed Decarboxylative Allylation of α‐Imino Esters: Decarboxylation via Free Carboxylate Ion

The Pd‐catalyzed decarboxylative allylation of α‐(diphenylmethylene)imino esters ( 1 ) or allyl diphenylglycinate imines ( 2 ) is an efficient method to construct new C(sp³)? C(sp³) bonds. The detailed mechanism of this reaction was studied by theoretical calculations [ONIOM(B3LYP/LANL2DZ+p:PM6)] combined with experimental observations. The overall catalytic cycle was found to consist of three steps: oxidative addition, decarboxylation, and reductive allylation. The oxidative addition of 1 to [(dba)Pd(PPh₃)₂] (dba=dibenzylideneacetone) produces an allylpalladium cation and a carboxylate anion with a low activation barrier of +9.1 kcal mol^?1. The following rate‐determining decarboxylation proceeds via a solvent‐exposed α‐imino carboxylate anion rather than an O‐ligated allylpalladium carboxylate with an activation barrier of +22.7 kcal mol^?1. The 2‐azaallyl anion generated by this decarboxylation attacks the face of the allyl ligand opposite to the Pd center in an outer‐sphere process to produce major product 3 , with a lower activation barrier than that of the minor product 4 . A positive linear Hammett correlation [ρ=1.10 for the PPh₃ ligand] with the observed regioselectivity ( 3 versus 4 ) supports an outer‐sphere pathway for the allylation step. When Pd combined with the bis(diphenylphosphino)butane (dppb) ligand is employed as a catalyst, the decarboxylation still proceeds via the free carboxylate anion without direct assistance of the cationic Pd center. Consistent with experimental observations, electron‐withdrawing substituents on 2 were calculated to have lower activation barriers for decarboxylation and, thus, accelerate the overall reaction rates.     

Gold nanoparticles stabilized by modified halloysite nanotubes for catalytic applications

A highly sustainable prototype of a flow system based on gold nanoparticles (4.2 nm) supported on thiol‐functionalized halloysite nanotubes (HNTs) was developed for catalytic applications. The catalytic performances were evaluated using the reduction of 4‐nitrophenol to 4‐aminophenol as a model system. Under the best experimental conditions (0.0001 mol%, 1.97 × 10^?8 mg of Au nanoparticles), an impressive apparent turnover frequency value up to 2 204 530 h^?1 was achieved and the halloysite‐based catalyst showed full recyclability even after ten cycles. The high catalytic activity confirms the importance of the use of HNTs as support for Au nanoparticles that can exert a synergistic effect both as medium for transfer of electrons from borohydride ions to 4‐nitrophenol and by modulating interfacial electron transfer dynamics. With the application of flow technology, the obtained heterogeneous HNT@Au catalyst was fully recovered and reused for at least one month.     

A Molecular Cobalt Hydrogen Evolution Catalyst Showing High Activity and Outstanding Tolerance to CO and O2

There is a demand to develop molecular catalysts promoting the hydrogen evolution reaction (HER) with a high catalytic rate and a high tolerance to various inhibitors, such as CO and O₂. Herein we report a cobalt catalyst with a penta‐dentate macrocyclic ligand ( 1‐Co ), which exhibits a fast catalytic rate (TOF=2210 s^?1) in aqueous pH 7.0 phosphate buffer solution, in which proton transfer from a dihydrogen phosphate anion (H₂PO₄^?) plays a key role in catalytic enhancement. The electrocatalyst exhibits a high tolerance to inhibitors, displaying over 90 % retention of its activity under either CO or air atmosphere. Its high tolerance to CO is concluded to arise from the kinetically labile character of undesirable CO‐bound species due to the geometrical frustration posed by the ligand, which prevents an ideal trigonal bipyramid being established.     

Insights into the Relationship of Catalytic Activity and Structure: A Comparison Study of Three Carbonic Anhydrase Mimics

Density functional theory (DFT) calculations were used to study the mechanism of CO₂ hydrolysis by Zn‐(1,5,9‐triazacyclododecane) and Zn‐cyclam and evaluate the associated thermodynamic and kinetic parameters. Microkinetic models were then built based on the kinetics and thermodynamics derived from first principles. Both catalysts showed very similar behavior to Zn‐cyclen, which we have reported previously, but with multiple distinctions. The intrinsic reaction rate constants for Zn‐(1,5,9‐triazacyclododecane) and Zn‐cyclam were calculated to be 2693 and 4623 M^?1 s^?1, respectively, which is in reasonable agreement with experimental values reported or estimated. The CO₂ adsorption step was found to be a rate‐limiting step for all three catalysts. Zn‐cyclam has the lowest barrier for this step due to the highest pK_a or nucleophilicity of the Zn‐OH^? form, and_, therefore, the highest intrinsic activity. However, the observed reaction rate constant also depends on the availability of the catalyst. The decrease in the observed reaction rate constant over 0–12 ms was ascribed to the decrease in the concentration of the catalytic form, Zn‐OH^?, which was primarily converted to Zn‐HCO₃^?. The reaction rate constant of Zn‐cyclam dropped much faster than those of Zn‐cyclen and Zn‐(1,5,9‐triazacyclododecane) due to lower energy of the Zn‐HCO₃^? form. The conversion of CO₂ at 1000 ms as a function of pH was calculated to compare the relative activity of these catalysts, and Zn‐cyclen was found to be the best catalyst.     

Homogeneous radical polymerization of 2‐hydroxyethyl methacrylate mediated by cyclometalated cationic Ruthenium(II) complexes with PF6− and Cl− in protic media

Cationic coordinatively saturated complexes of ruthenium(II), [Ru(o‐C₆H₄‐2‐py)(phen)(MeCN)₂]⁺, bearing different counterions of PF₆^? and Cl^? have been used in the radical polymerization of 2‐hydroxyethyl methacrylate in protic media and acetone under homogeneous conditions. Exchange of PF₆^? by Cl^? increases the solubility of the complex in water. Both complexes led to the fast polymerization under mild conditions, but control was achieved only in methanol and acetone and was better for the complex with Cl^?. The polymerization accelerated in aqueous media and proceeded to a high conversion even with a monomer/catalyst = 2000/1, but without control. Polymerization mediated by complex bearing Cl^? was slower in protic solvents but faster in acetone and always resulted in lower molecular weight polymers. Thus, the nature of the anion strongly affected the catalytic activity of the complexes and may serve as way of fine‐tuning the catalytic properties. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011