Efficient End‐Capping Synthesis of Neutral Donor–Acceptor [2]Rotaxanes Under Additive‐Free and Mild Conditions

Efficient end‐capping synthesis of neutral donor–acceptor (D –A) [2]rotaxanes without loading any catalysts or activating agents was achieved by utilizing high reactivity of a pentacoordinated hydrosilane toward salicylic acid derivatives. As components of [2]rotaxanes, an electron‐deficient naphthalenediimide‐containing axle with a salicylic acid terminus and several electron‐rich bis(naphthocrown) ether macrocycles were employed. End‐capping reactions with the pentacoordinated hydrosilane underwent smoothly even at low temperature to afford the corresponding [2]rotaxanes in good yields. A [2]rotaxane containing bis‐1,5‐(dinaphtho)‐38‐crown‐10 ether as a wheel molecule was synthesized and isolated in 84 % yield by the end‐capping at ?10 °C, presenting the highest yield ever reported for the end‐capping synthesis of a neutral D –A [2]rotaxane. It was found that the yields of the [2]rotaxanes in the end‐capping reactions were almost parallel to the formation ratios of the corresponding pseudo[2]rotaxanes estimated by utilizing model systems. These results indicate that the end‐capping reaction using the pentacoordinated hydrosilane proceeded without perturbing the threading process, and most of the pseudo[2]rotaxanes underwent efficient end‐capping reaction even at low temperature.     

Synthesis of a Structure‐Definite α‐Cyclodextrin‐Based Macromolecular [3]Rotaxane Using a Size‐Complementary Method

The challenging synthesis of an α‐cyclodextrin (CD)‐based macromolecular rotaxane with definite structure was fulfilled using a size‐complementary method. A new peracetylated (PAc) α‐CD‐based size‐complementary [3]rotaxane was prepared and its thermal dissociation kinetics studied. The de‐slippage mechanism was found to be different from that of the native α‐CD‐based system. PAcα‐CD‐based size‐complementary [3]rotaxanes were employed as initiators for a ring‐opening polymerization of ?‐caprolactone to obtain the macromolecular [3]rotaxanes. Detailed investigation of component dissociation showed the highly movable character of the wheel on the polymer main chain. A general method for controlling the movement of wheels in rotaxane frameworks, even in polymer systems, was established. This will enable the development of new supramolecular architectures and molecular machines.     

Structural Analysis and Inclusion Mechanism of Native and Permethylated α‐Cyclodextrin‐Based Rotaxanes Containing Alkylene Axles

Native α‐cyclodextrin‐ (α‐CD) and permethylated α‐CD (PMeCD)‐based rotaxanes with various short alkylene chains as axles can be synthesized through a urea end‐capping method. Native α‐CD tends to form [3]‐ or [5]pseudorotaxanes and not [2]‐ or [4]pseudorotaxanes, which indicates that the coupled CDs act as a single fragment. End‐capping reactions of the pseudorotaxanes with C18 and C24 axle lengths do not occur because the axle termini are covered by the densely stacked CDs. The number of PMeCDs on the pseudorotaxane is flexible and mainly depends on the axle length. Peracetylated α‐CD (PAcCD)‐based rotaxanes are synthesized through O‐acetylation of the α‐CD‐based rotaxanes without any decomposition of the rotaxanated structures. The structures of PMeCD‐based [3]‐ and [4]rotaxanes, and the molecular dynamics calculations on [3]pseudorotaxanes, indicate that the tail face of PMeCDs is regularly directed toward the axle termini. On the basis of the results obtained, it can be concluded that the directions and numbers of CDs in rotaxanes containing short alkylene chains depend on 1) the interactions between CDs, 2) the length of the alkylene axle, and 3) the interactions between the axle end and tail face of the CD.     

Chiral [1]Rotaxanes: X‐Ray Structures and Chiroptical Properties

New chiral [1]rotaxanes with aromatic bridges were prepared in yields up to 72% starting from a [2]rotaxane with sulfonamide groups in wheel and axle. The X‐ray structures of the parent [2]rotaxane 1 and of the three [1]rotaxanes 3e , g , h were solved which show networks of H‐bonds between wheel and axle. The separation of the racemic mixtures of four of the [1]rotaxanes, i.e., of 3a , b , d , e , was possible with HPLC on Chiralcel OD. The aromatic chromophores in the bridges lead to a considerable enhancement of the intensities of the molar CD as compared to the analogues with aliphatic bridges. In one case ( 3d ), the Cotton effects are as strong as those usually found in helicenes.     

Utilization of a Crown Ether/Amine‐Type Rotaxane as a Probe for the Versatile Detection of Anions and Acids by Thin‐Layer Chromatography

A crown ether/amine‐type [2]rotaxane was synthesized and utilized as a probe for the detection of acids and anions. The addition of acids to the amine‐type [2]rotaxane solution generated corresponding crown ether/ammonium‐type [2]rotaxanes, which were purified by silica gel column chromatography as ammonium salts. The isolated yields of the [2]rotaxanes, possessing a variety of anions, depended on the acidity and polarity of the counter anions. The behaviours of the ammonium‐type [2]rotaxanes on thin‐layer chromatography (TLC) silica gel reflected the properties of the counter anions. The treatment of the amine‐type [2]rotaxane with acids afforded the corresponding ammonium‐type [2]rotaxanes bearing several different anions. The ammonium‐type [2]rotaxanes behaved similarly to the purified [2]rotaxanes on the TLC silica gel. Furthermore, we succeeded in the analysis of anions using mixtures of the amine‐type [2]rotaxane and salts in an appropriate solvent. We demonstrated the detection of anions by the combination of TLC and the utilization of the [2]rotaxane probe.     

A Simple and Highly Effective Ligand System for the Copper(I)‐Mediated Assembly of Rotaxanes

A [2]rotaxane was produced through the assembly of a picolinaldehyde, an amine, and a bipyridine macrocycle around a Cu^I template by imine bond formation in close‐to‐quantitative yield. An analogous [3]rotaxane is obtained in excellent yield by replacing the amine with a diamine, thus showing the suitability of the system for the construction of higher order interlocked structures. The rotaxanes are formed within a few minutes simply through mixing the components in solution at room temperature and they can be isolated through removal of the solvent or precipitation.     

The Effect of Incorporating Fréchet Dendrons into Rotaxanes and Molecular Shuttles Containing the 1,2‐Bis(pyridinium)ethane⊂[24]Crown‐8 Templating Motif

Fréchet‐type dendrons (G0–G3) were added as both axle stoppering units and cyclic wheel appendages in a series of [2]rotaxanes, [3]rotaxanes, and molecular shuttles that employ 1,2‐bis(pyridinium)ethane axles and 24‐membered crown ethers wheels. The addition of dendrimer wedges as stoppering units dramatically increased the solubility of simple [2]rotaxanes in nonpolar solvents. The X‐ray structure of a G1‐stoppered [2]rotaxane shows how the dendritic units affect the structure of the interlocked components. Increased solubility allows observation of how the interaction of dendritic units on separate components in interlocked molecules influences switching properties and molecular size. In a series of [2]rotaxane molecular shuttles incorporating two recognition sites, it was demonstrated that an increase in generation on either the stoppering unit or cyclic wheel could influence both the rate of shuttling and the site preference of the wheel on the axle.     

A Strategy Utilizing a Recyclable Macrocycle Transporter for the Efficient Synthesis of a Triazolium‐Based [2]Rotaxane

A general synthesis of triazolium‐containing [2]rotaxanes, which could not be accessed by other methods, is reported. It is based on a sequential strategy starting from a well‐designed macrocycle transporter which contains a template for dibenzo‐24‐crown‐8 and a N‐hydroxysuccinimide (NHS) moiety. The sequence is: 1) synthesis by slippage of a [2]rotaxane building‐block; 2) its elongation at its NHS end; 3) the delivery of the macrocycle to the elongated part of the axle by an induced translational motion; 4) the contraction process to yield the targeted [2]rotaxane and recycle the initial transporter.     

Construction of Crown Ether‐Stoppering [3]Rotaxanes Based on N‐Hetero Crown Ether Host

Crown ether usually plays the role of macrocyclic host in supramolecular chemistry, but here the crown ether is also utilized as the stoppers in rotaxanes. In this work, we designed and synthesized two [3]rotaxanes containing four crown ether components by using an approach of template‐directed clipping reaction, of which, two crown ether components were employed as the macrocyclic hosts to assemble the mechanically interlocked framework while another two crown ether units located on the two ends of ammonium template acting as the stoppering groups of rotaxanes. Their self‐assembling process was monitored by the ¹H NMR and one of the single crystal structures of [3]rotaxane was obtained.     

Induction of Single‐Handed Helicity of Polyacetylenes Using Mechanically Chiral Rotaxanes as Chiral Sources

Effective induction of preferred‐handed helicity of polyacetylenes by pendant mechanically chiral rotaxanes is discussed. Polyacetylenes possessing optically active mechanically chiral rotaxanes in the side chains were synthesized by the polymerization of the corresponding enantiopure [2]rotaxane‐type ethynyl monomers prepared by the chiral‐phase HPLC separations. The CD Cotton effects revealed that the polyacetylenes took preferred‐handed helical conformations depending on the rotaxane chirality. The preferred‐handed helix was not disturbed by an additional chiral substituent on the rotaxane side chain. These results demonstrate the significance and utility of mechanically chiral rotaxanes for the effective construction of asymmetric fields.     

Synthesis of [3]Rotaxanes that Utilize the Catalytic Activity of a Macrocyclic Phenanthroline–Cu Complex: Remarkable Effect of the Length of the Axle Precursor

[3]Rotaxanes, which consist of one macrocyclic phenanthroline compound and two axle components, were prepared by the oxidative dimerization of an alkyne compound with bulky tris[4′‐cyclohexyl‐(1,1′‐biphenyl)‐4‐yl]methyl blocking group. The catalytic activity of a macrocyclic phenanthroline–Cu complex was utilized to thread the two axle components inside the ring. The alkyne compound with chain of 15 or 20 methylene groups gave [3]rotaxanes in high yields, whereas the axle with a chain of six methylene groups afforded a [3]rotaxane in very poor yield. We also examined the effect of the ring size on the synthesis of [3]rotaxanes. [3]Rotaxanes were not isolated when a macrocyclic phenanthroline compound with a smaller ring size was used.     

Dynamic covalent approach to [2]- and [3]roxtanes by utilizing a reversible thiol-disulfide interchange reaction

A dynamic covalent approach to disulfide-containing [2]- and [3]rotaxanes is described. Symmetrical dumbbell-shaped compounds with two secondary ammonium centers and a central located disulfide bond were synthesized as components of rotaxanes. The rotaxanes were synthesized from the dumbbell-shaped compounds and dibenzo-[24]crown-8 (DB24C8) with catalysis by benzenethiol. The yields of isolated rotaxanes reached about 90 % under optimized conditions. A kinetic study on the reaction forming [2]rotaxane 2 a and [3]rotaxane 3 a suggested a plausible reaction mechanism comprising several steps, including 1) initiation, 2) [2]rotaxane formation, and 3) [3]rotaxane formation. The whole reaction was found to be reversible in the presence of thiols, and thermodynamic control over product distribution was thus possible by varying the temperature, solvent, initial ratio of substrates, and concentration. The steric bulk of the end-capping groups had almost no influence on rotaxane yields, but the structure of the thiol was crucial for reaction rates. Amines and phosphines were also effective as catalysts. The structural characterization of the rotaxanes included an X-ray crystallographic study on [3]rotaxane 3 a.     

A Dual‐Response [2]Rotaxane Based on a 1,2,3‐Triazole Ring as a Novel Recognition Station

Two novel multilevel switchable [2]rotaxanes containing an ammonium and a triazole station have been constructed by a Cu^I‐catalyzed azide–alkyne cycloaddition reaction. The macrocycle of [2]rotaxane containing a C6‐chain bridge between the two hydrogen bonding stations exhibits high selectivity for the ammonium cation in the protonated form. Interestingly, the macrocycle is able to interact with the two recognition stations when the bridge between them is shortened. Upon deprotonation of both [2]rotaxanes, the macrocycle moves towards the triazole recognition site due to the hydrogen‐bond interaction between the triazole nitrogen atoms and the amide groups in the macrocycle. Upon addition of chloride anion, the conformation of [2]rotaxane is changed because of the cooperative recognition of the chloride anion by a favorable hydrogen‐bond donor from both the macrocycle isophthalamide and thread triazole CH proton.     

Five‐State Molecular Shuttling of a Pair of [2]Rotaxanes: Distinct Outputs in Response to Acid and Base Stimuli

In this study we synthesized two acid‐/base‐controllable [2]rotaxanes featuring aminodiazobenzene and aminocoumarin units, respectively, as chromophores and dibenzo[24]crown‐8 and dibenzo[25]crown‐8 units, respectively, as their macrocyclic components. Each [2]rotaxane contained N‐alkylarylamine (ammonium) and N,N‐dialkylamine (ammonium) centers as binding sites for their crown ether components. The absorption patterns of the chromophores were dependent on the position of the encircling macrocyclic component and the degree of protonation, with three distinct states (under acidic, neutral, and basic conditions) evident for each [2]rotaxane. The mixed [2]rotaxane system displayed stepwise and independent molecular shuttling behavior based on the degree of protonation of the amino groups in response to both the amount and strength of added acids or bases; as such, the system provided five different absorption signals as outputs that could be read using UV/Vis spectroscopy.     

Self-assembly and dynamics of [2]- and [3]rotaxanes with a dinuclear macrocycle containing reversible Os-N coordinate bonds

With a dinuclear macrocycle 2 that contains weak reversible OsVI-N coordinate bonds, self-assembly and equilibrium dynamics of [2]- and [3]rotaxanes have been investigated. When the macrocycle 2 was mixed together with threads 4a-e, which all contain an adipamide station but different sizes of end groups, [2]pseudorotaxane- and rotaxane-like complexes were immediately formed with large association constants of >7 x 103M(-1) in CDCl3 at 298 K. Exchange dynamics, explored by 2D-EXSY experiments, suggest that assembly and disassembly of complexes occur through two distinct pathways, slipping or clipping, and this depends on the size of the end groups. The slipping pathway is predominant with smaller end groups that give pseudorotaxane-like complexes, while the clipping pathway is observed with larger end groups that yield rotaxane-like complexes. Under the same conditions, exchange barriers (deltaG++) were 14.3 kcalmol(-1) for 4a and 16.7 kcalmol(-1) for 4d, and indicate that the slipping process is at least one order of magnitude faster than the clipping process. Using threads 13a and 13b that contain two adipamide groups, more complicated systems have been investigated in which [2]rotaxane, [3]rotaxane, and free components are in equilibrium. Concentration- and temperature-dependent 1H NMR spectroscopic studies allowed the identification of all possible elements and the determination of their relative distributions in solution. For example, the relative distribution of the free components, [2]rotaxane, and [3]rotaxane are 30, 45, and 25 %, respectively, in a mixture of 2 (2mM) and 13a (2mM) in CDCl3 at 10 degrees C. However, [3]rotaxane exists nearly quantitatively in a mixture of 2 (4 mM) and 13 a (2 mM) in CDCl3 at a low temperature - 10 degrees C.     

Using “Threading Followed by Shrinking” to Synthesize Highly Stable Dialkylammonium‐Ion‐Based Rotaxanes

Herein, we report a “threading followed by shrinking” approach for the synthesis of rotaxanes by using an “oxygen‐deficient” macrocycle that contained two arylmethyl sulfone units and the dumbbell‐shaped salt bis(3,5‐dimethylbenzyl)ammonium tetrakis(3,5‐trifluoromethylphenyl)borate as the host and guest components, respectively. The extrusion of SO₂ from both of the arylmethyl sulfone units of the macrocyclic component in the corresponding [2]pseudorotaxane resulted in a [2]rotaxane that was sufficiently stable to maintain its molecular integrity in CD₃SOCD₃ at 393 K for at least 5 h.     

Langmuir and Langmuir–Blodgett Films from Amphiphilic Pillar[5]arene‐Containing [2]Rotaxanes

Amphiphilic pillar[5]arene‐containing [2]rotaxanes have been prepared and fully characterized. In the particular case of the [2]rotaxane incorporating a 1,4‐diethoxypillar[5]arene subunit, the structure of the compound was confirmed by X‐ray crystal structure analysis. Owing to a good hydrophilic/hydrophobic balance, stable Langmuir films have been obtained for these rotaxanes and the size of the peripheral alkyl chains on the pillar[5]arene subunit has a dramatic influence on the reversibility during compression–decompression cycles. Indeed, when these are small enough, molecular reorganization of the rotaxane by gliding motions are capable of preventing strong π–π interactions between neighboring macrocycles in the thin film.     

Halotriazolium Axle Functionalised [2]Rotaxanes for Anion Recognition: Investigating the Effects of Halogen‐Bond Donor and Preorganisation

The anion‐templated synthesis of three novel halogen‐bonding 5‐halo‐1,2,3‐triazolium axle containing [2]rotaxanes is described, and the effects of altering the nature of the halogen‐bond donor atom together with the degree of inter‐component preorganisation on the anion‐recognition properties of the interlocked host investigated. The ability of the bromotriazolium motif to direct the halide‐anion‐templated assembly of interpenetrated [2]pseudorotaxanes was studied initially; bromide was found to be the most effective template. As a consequence, bromide anion templation was used to synthesise the first bromotriazolium axle containing [2]rotaxane, the anion‐binding properties of which, determined by ¹H NMR spectroscopic titration experiments, revealed enhanced bromide and iodide recognition relative to a hydrogen‐bonding protic triazolium rotaxane analogue. Two halogen‐bonding [2]rotaxanes with bromo‐ and iodotriazolium motifs integrated into shortened axles designed to increase inter‐component preorganisation were also synthesised. Anion ¹H NMR spectroscopic titration experiments demonstrated that these rotaxanes were able to bind halide anions even more strongly, with the iodotriazolium axle integrated rotaxane capable of recognising halides in aqueous solvent media. Importantly, these observations suggest that a halogen‐bonding interlocked host binding domain, in combination with increased inter‐component preorganisation, are requisite design features for a potent anion receptor.     

High‐Yield Diastereoselective Synthesis of Planar Chiral [2]‐ and [3]Rotaxanes Constructed from per‐Ethylated Pillar[5]arene and Pyridinium Derivatives

Planar chiral [2]‐ and [3]rotaxanes constructed from pillar[5]arenes as wheels and pyridinium derivatives as axles were obtained in high yield using click reactions. The process of rotaxane formation was diastereoselective; the obtained [2]rotaxane was a racemic mixture consisting of (pS, pS, pS, pS, pS) and (pR, pR, pR, pR, pR) forms of the per‐ethylated pillar[5]arene ( C2 ) wheel, and other possible types of the [2]rotaxane did not form. Isolation of the enantiopure [2]rotaxanes with one axle through (pS, pS, pS, pS, pS)‐ C2 or (pR, pR, pR, pR, pR)‐ C2 wheels was accomplished. Furthermore, pillar[5]arene‐based [3]rotaxane was successfully synthesized by attachment of two pseudo [2]rotaxanes onto a bifunctional linker. [3]Rotaxane formed in a 1:2:1 mixture with one axle threaded through two (pS, pS, pS, pS, pS)‐ C2 , one (pS, pS, pS, pS, pS)‐ C2 and one (pR, pR, pR, pR, pR)‐ C2 (meso form), or two (pR, pR, pR, pR, pR)‐ C2 wheels. The [3]rotaxane enantiomers and the meso form were successfully isolated using appropriate chiral HPLC column chromatography. The procedure developed in this study is the starting point for the creation of pillar[5]arene‐based interlocked molecules.     

Effects of Axle‐Core,Macrocycle, and Side‐Station Structures on the Threading and Hydrolysis Processes of Imine‐Bridged Rotaxanes

Imine‐bridged rotaxanes are a new type of rotaxane in which the axle and macrocyclic ring are connected by imine bonds. We have previously reported that in imine‐bridged rotaxane 5 , the shuttling motion of the macrocycle could be controlled by changing the temperature. In this study, we investigated how the axle and macrocycle structures affect the construction of the imine‐bridged rotaxane as well as the dynamic equilibrium between imine‐bridged rotaxane 5 and [2]rotaxane 7 by using various combinations of axles ( 1 A , B ), macrocycles ( 2 a – e ), and side‐stations (XYL and TEG). In the threading process, the flexibility of the macrocycle and the substituent groups at the para position of the aniline moieties affect the preparation of the threaded imines. The size of the imine‐bridging station and the macrocyclic tether affects the hydrolysis of the imine bonds under acidic conditions.