Cationic Ir/Me‐BIPAM‐Catalyzed Asymmetric Intramolecular Direct Hydroarylation of α‐Ketoamides

Asymmetric intramolecular direct hydroarylation of α‐ketoamides gives various types of optically active 3‐substituted 3‐hydroxy‐2‐oxindoles in high yields with complete regioselectivity and high enantioselectivities (84–98 % ee). This is realized by the use of the cationic iridium complex [Ir(cod)₂](BAr^F₄) and the chiral O‐linked bidentate phosphoramidite (R,R)‐Me‐BIPAM.     

Enantioselective Alkynylation of Trifluoromethyl Ketones Catalyzed by Cation‐Binding Salen Nickel Complexes

Cation‐binding salen nickel catalysts were developed for the enantioselective alkynylation of trifluoromethyl ketones in high yield (up to 99 %) and high enantioselectivity (up to 97 % ee). The reaction proceeds with substoichiometric quantities of base (10–20 mol % KOt‐Bu) and open to air. In the case of trifluoromethyl vinyl ketones, excellent chemo‐selectivity was observed, generating 1,2‐addition products exclusively over 1,4‐addition products. UV‐vis analysis revealed the pendant oligo‐ether group of the catalyst strongly binds to the potassium cation (K⁺) with 1:1 binding stoichiometry (K_a=6.6×10⁵ m ^?1).     

Do Trinuclear Triplesalen Complexes Exhibit Cooperative Effects? Synthesis,Characterization, and Enantioselective Catalytic Sulfoxidation by Chiral Trinuclear FeIII Triplesalen Complexes

The chiral triplesalen ligand H₆chand provides three chiral salen ligand compartments in a meta‐phenylene arrangement by a phloroglucinol backbone. The two diastereomeric versions H₆chand^RR and H₆chand^rac have been used to synthesize the enantiomerically pure chiral complex [(FeCl)₃(chand^RR)] ( 3^RR ) and the racemic complex [(FeCl)₃(chand^rac)] ( 3^rac ). The molecular structure of the free ligand H₆chand^rac exhibits at the terminal donor sides the O‐protonated phenol–imine tautomer and at the central donor sides the N‐protonated keto–enamine tautomer. The trinuclear complexes are comprised of five‐coordinate square‐pyramidal Fe^III ions with a chloride at the axial positions. The crystal structure of 3^rac exhibits collinear chiral channels of ～11 Å in diameter making up 33.6 % of the volume of the crystals, whereas the crystal structure of 3^RR exhibits voids of 560 ų. Mössbauer spectroscopy demonstrates the presence of Fe^III high‐spin ions. UV/Vis spectroscopy is in accordance with a large delocalized system in the central backbone evidenced by strong low‐energy shifts of the imine π–π* transitions relative to that of the terminal units. Magnetic measurements reveal weak intramolecular exchange interactions but strong magnetic anisotropies of the Fe^III ions. Complexes 3^rac and 3^RR are good catalysts for the sulfoxidation of sulfides providing very good yields and high selectivities with 3^RR being enantioselective. A comparison of 3^RR and [FeCl(salen′)] provides higher yields and selectivities but lower enantiomeric excess values (ee values) for 3^RR relative to [FeCl(salen′)]. The low ee values of 3^RR appeared to be connected to a strong ligand folding in 3^RR , opening access to the catalytically active high‐valent Fe–O species. The higher selectivity is assigned to a cooperative stabilization of the catalytically active high‐valent Fe–O species through the phloroglucinol backbone in the trinuclear complexes.     

Poly(styrene)‐Supported Co–Salen Complexes as Efficient Recyclable Catalysts for the Hydrolytic Kinetic Resolution of Epichlorohydrin

Here we describe an unprecedented synthetic approach to poly(styrene)‐supported chiral salen ligands by the free radical polymerization of an unsymmetrical styryl‐substituted salen monomer (H₂salen=bis(salicylidene)ethylenediamine). The new method allows for the attachment of salen moieties to the polymer main chain in a flexible, pendant fashion, avoiding grafting reactions that often introduce ill‐defined species on the polymers. Moreover, the loading of the salen is controlled by the copolymerization of the styryl‐substituted salen monomer with styrene in different ratios. The polymeric salen ligands are metallated with cobalt(II ) acetate to afford the corresponding supported Co–salen complexes, which are used in the hydrolytic kinetic resolution of racemic epichlorohydrin, exhibiting high reactivity and enantioselectivity. Remarkably, the copolymer‐supported Co–salen complexes showed a better catalytic performance (>99 % ee, 54 % conversion, one hour) in comparison to the homopolymeric analogues and the small molecule Co–salen complex. The soluble poly(styrene)‐supported catalysts were recovered by precipitation after the catalytic reactions and were recycled three times to afford almost identical enantiomeric excesses as the first run, with slightly reduced reaction rates.     

Direct and Post‐Synthesis Incorporation of Chiral Metallosalen Catalysts into Metal–Organic Frameworks for Asymmetric Organic Transformations

Two chiral porous metal–organic frameworks (MOFs) were constructed from [VO(salen)]‐derived dicarboxylate and dipyridine bridging ligands. After oxidation of V^IV to V^V, they were found to be highly effective, recyclable, and reusable heterogeneous catalysts for the asymmetric cyanosilylation of aldehydes with up to 95 % ee. Solvent‐assisted linker exchange (SALE) treatment of the pillared‐layer MOF with [Cr(salen)Cl]‐ or [Al(salen)Cl]‐derived dipyridine ligands led to the formation of mixed‐linker metallosalen‐based frameworks and incorporation of [Cr(salen)] enabled its use as a heterogeneous catalyst in the asymmetric epoxide ring‐opening reaction.     

Catalytic Asymmetric Synthesis of 3‐(α‐Hydroxy‐β‐carbonyl) Oxindoles by a ScIII‐Catalyzed Direct Aldol‐Type Reaction

A direct catalytic asymmetric aldol‐type reaction of 3‐substituted‐2‐oxindoles with glyoxal derivatives and ethyl trifluoropyruvate, catalyzed by a chiral N,N′‐dioxide–Sc(OTf)₃ (Tf=trifluoromethanesulfonyl) complex, has been developed that tolerates a wide range of substrates. The reaction proceeds in good yields and excellent enantioselectivities (up to 93 % yield, 99:1 diastereomeric ratio (dr), and >99 % enantiomeric excess (ee)) under mild conditions, to deliver 3‐(α‐hydroxy‐β‐carbonyl) oxindoles with vicinal quaternary–tertiary or quaternary–quaternary stereocenters. Even with 1 mol % catalyst loading or on scaleup (10 mmol of starting material), maintenance of ee was observed, which showed the potential value of the catalyst system. In studies probing the reaction mechanism, a positive nonlinear effect was observed and Sc^III‐based enolate intermediates were detected by using ESIMS. On the basis of the experimental results and previous reports, a possible catalytic cycle was assumed.     

Enantioselective Synthesis and Application to the Allylic Imidate Rearrangement of Amine‐Coordinated Palladacycle Catalysts of Cobalt Sandwich Complexes

The reaction of (η⁵‐(N,N‐dimethylaminomethyl)cyclopentadien‐yl)(η⁴‐tetraphenylcyclobutadiene)cobalt with sodium tetrachloropalladate and (R)‐N‐acetylphenylalanine gave planar chiral palladacycle di‐μ‐chloridebis[(η⁵‐(S_p)‐2‐(N,N‐dimethylaminomethyl)cyclopentadienyl,1‐C,3′‐N)(η⁴‐tetraphenylcyclobutadiene)cobalt]dipalladium [(S_p)‐Me₂‐CAP‐Cl] in 92 % ee and 64 % yield. Enantiopurity (>98 % ee) was achieved by purification of the monomeric (R)‐proline adducts and conversion back to the chloride dimer. Treatment with AgOAc gave (S_p)‐Me₂‐CAP‐OAc which was applied to asymmetric transcyclopalladation (up to 78 % ee). The (R)‐N‐acetylphenylalanine mediated palladation methodology was applicable also to the corresponding N,N‐diethyl (82 % ee, 39 % yield) and pyrrolidinyl (>98 % ee, 43 % yield) cobalt sandwich complexes. A combination of 5 mol % of the latter [(S_p)‐Pyrr‐CAP‐Cl] and AgNO₃ (3.8 equiv) is a catalyst for the allylic imidate rearrangement of an (E)‐N‐aryltrifluoroacetimidate (up to 83 % ee), and this catalyst system is also applicable to the rearrangement of a range of (E)‐trichloroacetimidates (up to 99 % ee). This asymmetric efficiency combined with the simplicity of catalyst synthesis provides accessible solutions to the generation of non‐racemic allylic amine derivatives.     

Chemoselectivity Control in the Asymmetric Hydrogenation of γ‐ and δ‐Keto Esters into Hydroxy Esters or Diols

The asymmetric hydrogenation of aromatic γ‐ and δ‐keto esters into optically active hydroxy esters or diols under the catalysis of a novel DIPSkewphos/3‐AMIQ–Ru^II complex was studied. Under the optimized conditions (8 atm H₂ , Ru complex/t‐C₄H₉OK=1:3.5, 25 °C) the γ‐ and δ‐hydroxy esters (including γ‐lactones) were obtained quantitatively with 97–99 % ee. When the reaction was conducted under somewhat harsh conditions (20 atm H₂ , [t‐C₄H₉OK]=50 mm , 40 °C), the 1,4‐ and 1,5‐diols were obtained predominantly with 95–99 % ee. The reactivity of the ester group was notably dependent on the length of the carbon spacer between the two carbonyl moieties of the substrate. The reaction of β‐ and ?‐keto esters selectively afforded the hydroxy esters regardless of the reaction conditions. This catalyst system was applied to the enantioselective and regioselective (for one of the two ester groups) hydrogenation of a γ‐?‐diketo diester into a trihydroxy ester.     

Development of a Continuous‐Flow System for Asymmetric Hydrogenation Using Self‐Supported Chiral Catalysts

Well‐designed, self‐assembled, metal–organic frameworks were constructed by simple mixing of multitopic MonoPhos‐based ligands ( 3 ; MonoPhos=chiral, monodentate phosphoramidites based on the 1,1′‐bi‐2‐naphthol platform) and [Rh(cod)₂]BF₄ (cod=cycloocta‐1,5‐diene). This self‐supporting strategy allowed for simple and efficient catalyst immobilization without the use of extra added support, giving well‐characterized, insoluble (in toluene) polymeric materials ( 4 ). The resulting self‐supported catalysts ( 4 ) showed outstanding catalytic performance for the asymmetric hydrogenation of a number of α‐dehydroamino acids ( 5 ) and 2‐aryl enamides ( 7 ) with enantiomeric excess (ee) ranges of 94–98 % and 90–98 %, respectively. The linker moiety in 4 influenced the reactivity significantly, albeit with slight impact on the enantioselectivity. Acquisition of reaction profiles under steady‐state conditions showed 4 h and 4 i to have the highest reactivity (turnover frequency (TOF)=95 and 97 h^?1 at 2 atm, respectively), whereas appropriate substrate/catalyst matching was needed for optimum chiral induction. The former was recycled 10 times without loss in ee (95–96 %), although a drop in TOF of approximately 20 % per cycle was observed. The estimation of effective catalytic sites in self‐supported catalyst 4 e was also carried out by isolation and hydrogenation of catalyst–substrate complex, showing about 37 % of the Rh^I centers in the self‐supported catalyst 4 e are accessible to substrate 5 c in the catalysis. A continuous flow reaction system using an activated C/ 4 h mixture as stationary‐phase catalyst for the asymmetric hydrogenation of 5 b was developed and run continuously for a total of 144 h with >99 % conversion and 96–97 % enantioselectivity. The total Rh leaching in the product solution is 1.7 % of that in original catalyst 4 h .     

Temperature Dual Enantioselective Control in a Rhodium‐Catalyzed Michael‐Type Friedel–Crafts Reaction: A Mechanistic Explanation

By changing the temperature from 283 to 233 K, the S (99 % ee) or R (96 % ee) enantiomer of the Friedel–Crafts (FC) adduct of the reaction between N‐methyl‐2‐methylindole and trans‐β‐nitrostyrene can be obtained by using (S_Rh,R_C)‐[(η⁵‐C₅Me₅)Rh{(R)‐Prophos}(H₂O)][SbF₆]₂ as the catalyst precursor. This catalytic system presents two other uncommon features: 1) The ee changes with reaction time showing trends that depend on the reaction temperature and 2) an increase in the catalyst loading results in a decrease in the ee of the S enantiomer. Detection and characterization of the intermediate metal–nitroalkene and metal–aci‐nitro complexes, the free aci‐nitro compound, and the FC adduct‐complex, together with solution NMR measurements, theoretical calculations, and kinetic studies have allowed us to propose two plausible alternative catalytic cycles. On the basis of these cycles, all the above‐mentioned observations can be rationalized. In particular, the reversibility of one of the cycles together with the kinetic resolution of the intermediate aci‐nitro complexes account for the high ee values achieved in both antipodes. On the other hand, the results of kinetic measurements explain the unusual effect of the increment in catalyst loading.     

A Highly cis‐Selective and Enantioselective Metal‐Free Hydrogenation of 2,3‐Disubstituted Quinoxalines

A wide range of 2,3‐disubstituted quinoxalines have been successfully hydrogenated with H₂ using borane catalysts to produce the desired tetrahydroquinoxalines in 80–99 % yields with excellent cis selectivity. Significantly, the asymmetric reaction employing chiral borane catalysts generated by the in situ hydroboration of chiral dienes with HB(C₆F₅)₂ under mild reaction conditions has also been achieved with up to 96 % ee, and represents the first catalytic asymmetric system to furnish optically active cis‐2,3‐disubstituted 1,2,3,4‐tetrahydroquinoxalines.     

Asymmetric Hydrolytic Kinetic Resolution with Recyclable Macrocyclic CoIII–Salen Complexes: A Practical Strategy in the Preparation of (R)‐Mexiletine and (S)‐Propranolol

A chiral cobalt(III) complex ( 1 e ) was synthesized by the interaction of cobalt(II) acetate and ferrocenium hexafluorophosphate with a chiral dinuclear macrocyclic salen ligand that was derived from 1R,2R‐(?)‐1,2‐diaminocyclohexane with trigol bis‐aldehyde. A variety of epoxides and glycidyl ethers were suitable substrates for the reaction with water in the presence of chiral macrocyclic salen complex 1 e at room temperature to afford chiral epoxides and diols by hydrolytic kinetic resolution (HKR). Excellent yields (47 % with respect to the epoxides, 53 % with respect to the diols) and high enantioselectivity (ee>99 % for the epoxides, up to 96 % for the diols) were achieved in 2.5–16 h. The Co^III macrocyclic salen complex ( 1 e ) maintained its performance on a multigram scale and was expediently recycled a number of times. We further extended our study of chiral epoxides that were synthesized by using HKR to the synthesis of chiral drug molecules (R)‐mexiletine and (S)‐propranolol.     

Highly Enantioselective Iron‐Catalyzed cis‐Dihydroxylation of Alkenes with Hydrogen Peroxide Oxidant via an FeIII‐OOH Reactive Intermediate

The development of environmentally benign catalysts for highly enantioselective asymmetric cis‐dihydroxylation (AD) of alkenes with broad substrate scope remains a challenge. By employing [Fe^II(L)(OTf)₂] (L=N,N′‐dimethyl‐N,N′‐bis(2‐methyl‐8‐quinolyl)‐cyclohexane‐1,2‐diamine) as a catalyst, cis‐diols in up to 99.8 % ee with 85 % isolated yield have been achieved in AD of alkenes with H₂O₂ as an oxidant and alkenes in a limiting amount. This “[Fe^II(L)(OTf)₂]+H₂O₂” method is applicable to both (E)‐alkenes and terminal alkenes (24 examples >80 % ee, up to 1 g scale). Mechanistic studies, including ¹⁸O‐labeling, UV/Vis, EPR, ESI‐MS analyses, and DFT calculations lend evidence for the involvement of chiral Fe^III‐OOH active species in enantioselective formation of the two C?O bonds.     

Asymmetric oxidation of sulfides with H2O2 catalyzed by titanium complexes of Schiff bases bearing a dicumenyl salicylidenyl unit

The sterically hindered Schiff bases (L³–L⁵), prepared from 3,5‐dicumenyl salicylaldehyde and chiral amino alcohols, were used in combination with Ti(OiPr)₄ for asymmetric oxidation of aryl methyl sulfides with H₂O₂ as terminal oxidant. Among the ligands L³–L⁵, L⁴ with a tert‐butyl group in the chiral carbon of the amino alcohol moiety gave the best result with 89% yield and 73% ee for the sulfoxidation of thioanisole under optimal conditions [with 1 mol% of Ti(OiPr)₄ in a molar ratio of 100:1:1.2:120 for sulfide:Ti(OiPr)₄:ligand:H₂O₂ in CH₂Cl₂ at 0 °C for 3 h]. The reaction afforded good yield (84%) with a moderate enantioselectivity (62% ee) even with a lower catalyst loading from 1.0 to 0.5 mol%. The oxidations of methyl 4‐bromophenyl sulfide and methyl 4‐methoxyphenyl sulfide with H₂O₂ catalyzed by the Ti(OiPr)₄–L⁴ system gave 79–84% yields and 54–59% ee of the corresponding sulfoxides in CH₂Cl₂ at 20 °C. The chiral induction capability of the cumenyl‐modified sterically hindered Schiff bases for sulfoxidation was compared with the conventional Schiff bases bearing tert‐butyl groups at the 3,5‐positions of the salicylidenyl unit. Copyright © 2011 John Wiley & Sons, Ltd.     

Werner Complexes with ω‐Dimethylaminoalkyl Substituted Ethylenediamine Ligands: Bifunctional Hydrogen‐Bond‐Donor Catalysts for Highly Enantioselective Michael Additions

The racemic carbonate complex [Co(en)₂O₂CO]⁺ Cl^? (en=1,2‐ethylenediamine) and (S)‐[H₃NCH((CH₂)_nNHMe₂)CH₂NH₃]³⁺ 3 Cl^? (n=1–4) react (water, charcoal, 100 °C) to give [Co(en)₂((S)‐H₂NCH((CH₂)_nNHMe₂)CH₂NH₂)]⁴⁺ 4 Cl^? ( 3 a – d H⁴⁺ 4 Cl^?) as a mixture of Λ/Δ diastereomers that separate on chiral‐phase Sephadex columns. These are treated with NaOH/Na⁺ BAr_f^? (BAr_f=B(3,5‐C₆H₃(CF₃)₂)₄) to give lipophilic Λ‐ and Δ‐ 3 a–d ³⁺ 3 BAr_f^?, which are screened as catalysts (10 mol %) for additions of dialkyl malonates to nitroalkenes. Optimal results are obtained with Λ‐ 3 c ³⁺ 3 BAr_f^? (CH₂Cl₂, ?35 °C; 98–82 % yields and 99–93 % ee for six β‐arylnitroethenes). The monofunctional catalysts Λ‐ and Δ‐[Co(en)₃]³⁺ 3 BAr_f^? give enantioselectivities of <10 % ee with equal loadings of Et₃N. The crystal structure of Δ‐ 3 a H⁴⁺ 4 Cl^? provides a starting point for speculation regarding transition‐state assemblies.     

B(C6F5)3/Chiral Phosphoric Acid Catalyzed Ketimine–Ene Reaction of 2‐Aryl‐3H‐indol‐3‐ones and α‐Methylstyrenes

The enantioselective ketimine–ene reaction is one of the most challenging stereocontrolled reaction types in organic synthesis. In this work, catalytic enantioselective ketimine–ene reactions of 2‐aryl‐3H‐indol‐3‐ones with α‐methylstyrenes were achieved by utilizing a B(C₆F₅)₃/chiral phosphoric acid (CPA) catalyst. These ketimine–ene reactions proceed well with low catalyst loading (B(C₆F₅)₃/CPA=2 mol %/2 mol %) under mild conditions, providing rapid and facile access to a series of functionalized 2‐allyl‐indolin‐3‐ones with very good reactivity (up to 99 % yield) and excellent enantioselectivity (up to 99 % ee). Theoretical calculations reveal that enhancement of the acidity of the chiral phosphoric acid by B(C₆F₅)₃ significantly reduces the activation free energy barrier. Furthermore, collective favorable hydrogen‐bonding interactions, especially the enhanced N?H???O hydrogen‐bonding interaction, differentiates the free energy of the transition states of CPA and B(C₆F₅)₃/CPA, thereby inducing the improvement of stereoselectivity.     

Chiral 2‐endo‐Substituted 9‐Oxabispidines: Novel Ligands for Enantioselective Copper(II)‐Catalyzed Henry Reactions

A flexible approach, applicable on a gram scale, to chiral 2‐endo‐substituted 9‐oxabispidines was developed. The key intermediate, a cis‐configured 6‐aminomethylmorpholine‐2‐carbonitrile, was prepared from (R)‐3‐aminopropane‐1,2‐diol and 2‐chloroacrylonitrile. The 2‐endo substituent was introduced by Grignard addition, cyclization, and exo‐selective reduction, thus furnishing the enantiomerically pure bi‐ and tricyclic 9‐oxabispidines in 19–59 % yield. The CuCl₂ complex of the tricyclic 9‐oxabispidine, which carries an 2‐endo,N‐anellated piperidine ring, is an excellent catalyst for enantioselective Henry reactions giving the S‐configured β‐nitro alcohols in 91–98 % ee (13 examples). Surprisingly, the analogous copper complexes of the bicyclic 9‐oxabispidines delivered the enantiocomplementary R‐configured products in 33–57 % ee. The respective transition states were discussed.     

Asymmetric Conjugate Reduction of α,β‐Unsaturated Ketones and Esters with Chiral Rhodium(2,6‐bisoxazolinylphenyl) Catalysts

New asymmetric conjugate reduction of β,β‐disubstituted α,β‐unsaturated ketones and esters was accomplished with alkoxylhydrosilanes in the presence of chiral rhodium(2,6‐bisoxazolinylphenyl) complexes in high yields and high enantioselectivity. (E)‐4‐Phenyl‐3‐penten‐2‐one and (E)‐4‐phenyl‐4‐isopropyl‐3‐penten‐2‐one were readily reduced at 60 °C in 95 % ee and 98 % ee, respectively, by 1 mol % of catalyst loading. (EtO)₂MeSiH proved to be the best hydrogen donor of choice. tert‐Butyl (E)‐β‐methylcinnamate and β‐isopropylcinnamate could also be reduced to the corresponding dihydrocinnamate derivatives up to 98 % ee.     

Enantioselective Addition of Cyclic Enol Silyl Ethers to 2‐Alkenoyl‐Pyridine‐N‐Oxides Catalysed by CuII–Bis(oxazoline) Complexes

Asymmetric reactions involving (E)‐3‐aryl‐1‐(pyridin‐2‐yl‐N‐oxide)prop‐2‐en‐1‐ones and cyclic enol silyl ethers show good yields and excellent enantioselectivities (up to 99.9 % ee) when catalysed by bis(oxazoline)–Cu^II complexes. Different reaction pathways can be followed by different enol silyl ethers: with 2‐(trimethylsilyloxy)furan, a Mukaiyama–Michael adduct is obtained, whereas a hetero Diels–Alder cycloadduct was formed by using (1,2‐dihydronaphthalen‐4‐yloxy)trimethylsilane. In the latter reaction, the absolute configuration of the product is consistent with a reagent approach to the less hindered Re face of the coordinated substrate in the reactive complex.     

A non‐PFT (polymerization filling technique) approach to poly(ethylene‐co‐norbornene)/MWNTs nanocomposites by in situ copolymerization with scandium half‐sandwich catalyst

The in situ synthesis of ethylene‐co‐norbornene copolymers/multi‐walled carbon nanotubes (MWNTs) nanocomposites was achieved by rare‐earth half‐sandwich scandium precursor [Sc(η⁵‐C₅Me₄SiMe₃)(η¹‐CH₂SiMe₃)₂(THF)] (1) activated by [Ph₃C][B(C₆F₅)₄], through a non‐PFT (Polymerization Filling Technique) approach. MWNTs nanocomposites with low aluminum residue were obtained with excellent yields even though small amounts of triisobutylaluminium were needed as scavenger to prevent catalyst poisoning by MWNT impurities. MWNT bundles were disaggregated and highly coated with Poly(ethylene‐co‐norbornene) [P(E‐co‐N)] as revealed by transmission electron microscopy. Interestingly, P(E‐co‐N) copolymers showed T_g over 130 °C as well as norbornene content over 50 mol %; both values were higher than those obtained by the cationic active species in 1 /[Ph₃C][B(C₆F₅)₄]. A series of copolymerization reactions by 1 /[Ph₃C][B(C₆F₅)₄]/AlⁱBu₃ without MWNTs produced copolymers with the same unexpected features. The NMR analysis revealed the presence of rac‐ENNE and rac‐ENNNE sequences. Thus, AlⁱBu₃ changed the stereoirregular alternating copolymer microstructure produced by 1 /[Ph₃C][B(C₆F₅)₄]. We conclude that AlⁱBu₃ is not only a scavenger for CNT impurities, but it reacts with the THF ligand to give coordinatively unsaturated active species. Finally, P(E‐co‐N)/MWNT masterbatches were mixed with commercial TOPAS to produce cyclic olefin copolymer nanocomposites with excellent dispersion of filler. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5709–5719, 2009