One‐pot Synthesis of CdS Nanocrystals Hybridized with Single‐Layer Transition‐Metal Dichalcogenide Nanosheets for Efficient Photocatalytic Hydrogen Evolution

Exploration of low‐cost and earth‐abundant photocatalysts for highly efficient solar photocatalytic water splitting is of great importance. Although transition‐metal dichalcogenides (TMDs) showed outstanding performance as co‐catalysts for the hydrogen evolution reaction (HER), designing TMD‐hybridized photocatalysts with abundant active sites for the HER still remains challenge. Here, a facile one‐pot wet‐chemical method is developed to prepare MS₂–CdS (M=W or Mo) nanohybrids. Surprisedly, in the obtained nanohybrids, single‐layer MS₂ nanosheets with lateral size of 4–10 nm selectively grow on the Cd‐rich (0001) surface of wurtzite CdS nanocrystals. These MS₂–CdS nanohybrids possess a large number of edge sites in the MS₂ layers, which are active sites for the HER. The photocatalytic performances of WS₂–CdS and MoS₂–CdS nanohybrids towards the HER under visible light irradiation (>420 nm) are about 16 and 12 times that of pure CdS, respectively. Importantly, the MS₂–CdS nanohybrids showed enhanced stability after a long‐time test (16 h), and 70 % of catalytic activity still remained.     

Self-assembly of nanosized 0D clusters: CdS quantum dot-polyoxotungstate nanohybrids with strongly coupled electronic structures and visible-light-active photofunctions

Nanohybrids of CdS–polyoxotungstate with strongly coupled electronic structures and visible‐light‐active photofunctions can be synthesized by electrostatically derived self‐assembly of very small CdS quantum dots, or QDs, (particle size≈2.5 nm) and polyoxotungstate nanoclusters (cluster size≈1 nm). The formation of CdS–polyoxotungstate nanohybrids is confirmed by high‐resolution transmission electron microscopy, elemental mapping, and powder X‐ray diffraction analysis. Due to the strong electronic coupling between two semiconductors, the CdS–polyoxotungstate nanohybrids show a narrow bandgap energy of around 1.9–2.7 eV, thus reflecting their ability to harvest visible light. Time‐resolved photoluminescence experiments indicate that the self‐assembly between nanosized CdS and polyoxotungstate is very effective in increasing the lifetime of holes and electrons, thus indicating an efficient electron transfer between two‐component semiconductors. The hybridization results not only in a significant improvement in the photostability of CdS QD but also in the creation of visible‐light‐induced photochromism. Of particular importance is that the present nanohybrids show visible‐light‐driven photocatalytic activity to produce H₂ and O₂, which is superior to those of the unhybridized CdS and polyoxotungstate. The self‐assembly of nanometer‐level semiconductor clusters can provide a powerful way of optimizing the photoinduced functionalities of each component (i.e., visible‐induced photochromism and photocatalysis) by means of strong electronic coupling.     

Transparent,Ultrahigh‐Gas‐Barrier Films with a Brick–Mortar–Sand Structure

Transparent and flexible gas‐barrier materials have shown broad applications in electronics, food, and pharmaceutical preservation. Herein, we report ultrahigh‐gas‐barrier films with a brick–mortar–sand structure fabricated by layer‐by‐layer (LBL) assembly of XAl‐layered double hydroxide (LDH, X=Mg, Ni, Zn, Co) nanoplatelets and polyacrylic acid (PAA) followed by CO₂ infilling, denoted as (XAl‐LDH/PAA)_n‐CO₂. The near‐perfectly parallel orientation of the LDH “brick” creates a long diffusion length to hinder the transmission of gas molecules in the PAA “mortar”. Most significantly, both the experimental studies and theoretical simulations reveal that the chemically adsorbed CO₂ acts like “sand” to fill the free volume at the organic–inorganic interface, which further depresses the diffusion of permeating gas. The strategy presented here provides a new insight into the perception of barrier mechanism, and the (XAl‐LDH/PAA)_n‐CO₂ film is among the best gas barrier films ever reported.     

Amine‐Assisted Syntheses of Carbonate‐Free and Highly Crystalline Nitrate‐Containing Zn‐Al Layered Double Hydroxides

Zn‐Al layered double hydroxides (LDHs), with nitrate as the charge balancing anion in the interlayer space, were synthesized by precipitation from homogeneous solution containing different amines [e.g., hexamethylenetetraamine (HMTA), diethylenediamine (DEDA), trimethylamine (TMA) and dimethylamine (DMA)]. The applied method does not require nitrogen atmosphere. The solution pH and concentration of different amines were varied in order to identify the controlling parameters and whether nitrate or carbonate are the interlayer anion. Particularly, the addition of amines turns out to be an effective tool for the synthesis of nitrate containing Zn‐Al LDHs independent from the nitrogen atmosphere. The structure, textural, composition, and morphological properties were investigated using the powder X‐ray diffraction (PXRD), thermogravimetric analysis (TGA), FT‐IR spectroscopy, and scanning electron microscopy (SEM). The analyses showed that the samples had high crystallinity and purity. The NO₃‐ZnAl LDHs samples show that LDH sheets are predominantly smooth textured and the thickness of LDH sheets are found to be around 23 nm. The results also indicate that this method successfully produces a NO₃^– form Zn‐Al LDH that is almost identical to the one synthesized by conventional methods.     

Synthesis and Characterization of [Zn‐Al] Layered Double Hydroxides: Effect of the Operating Parameters

In this study, [Zn‐Al] layered double hydroxides (LDHs ) were prepared using the coprecipitation method at constant pH . The synthesis parameters (including the aging time, synthesis pH , nature of the alkali, concentration of metallic salts, and the cationic molar ratio R = Zn/Al) were varied in order to elucidate their effect on the properties of the obtained materials. Different characterization techniques, namely X‐ray diffraction, Fourier transform infrared, thermogravimetric analysis‐differential thermogravimetry, transmission electron microscopy, energy‐dispersive X‐ray, inductively coupled plasma, and photoluminescence, were used in this study. It was found that obtaining well‐crystallized LDHs requires (i) an aging time of 24 h and (ii) a synthesis pH value in the range 8–12. Our results also show that the concentration of the cationic metallic salts has no influence on the structural properties of the LDHs . The use of NH₄OH as alkali for adjusting the pH value during the synthesis favors the formation of nitrated LDH phases while NaOH gives rise to carbonated ones. Moreover, it was found that irrespective of the molar cationic ratio used (between 1 and 5), [Zn‐Al] LDHs could be obtained. The sample synthesized at R = 2 exhibited the best crystallinity.     

A pH‐Responsive Layered Double Hydroxide (LDH)–Phthalocyanine Nanohybrid for Efficient Photodynamic Therapy

A pH‐responsive nanohybrid (LDH–ZnPcPS₄), in which a highly hydrophilic zinc(II) phthalocyanine tetra‐α‐substituted with 4‐sulfonatophenoxy groups (ZnPcPS₄) is incorporated with a cationic layered double hydroxide (LDH) based on electrostatic interaction, has been specially designed and prepared through a facile co‐precipitation approach. ZnPcPS₄ is an excellent singlet‐oxygen generator with strong absorption at the near‐infrared region (692 nm) in cellular culture media, whereas the photoactivities of ZnPcPS₄ were remarkably inhibited after incorporation with the LDH. The nanohybrid is essentially stable in aqueous media at pH 7.4; nevertheless, in slightly acidic media of pH 6.5 or 5.0, ZnPcPS₄ can be efficiently released from the LDH matrix, thus leading to restoration of the photoactivities. The nanohybrid shows a high photocytotoxicity against HepG2 cells as a result of much more efficient cellular uptake and preferential accumulation in lysosomes, whereby the acidic environment leads to the release of ZnPcPS₄. The IC₅₀ value of LDH–ZnPcPS₄ is as low as 0.053 μM , which is 24‐fold lower than that of ZnPcPS₄. This work provides a facile approach for the fabrication of photosensitizers with high photocytotoxicity, potential tumor selectivity, and rapid clearance character.     

Crystal Structure and Spectroscopic Properties of Bis[trans‐dichlorobis(2,2‐dimethylpropane‐1,3‐diamine)chromium(III)] Tetrachlorozincate

The structure of trans‐[Cr(Me₂tn)₂Cl₂]₂ZnCl₄ (Me₂tn = 2,2‐dimethylpropane‐1,3‐diamine) was determined by a single‐crystal X‐ray diffraction study at 173 K. The analysis reveals that there are three crystallographically independent chromium(III) complex cations in the title compound. The chromium(III) atoms are coordinated by four nitrogen atoms of Me₂tn and two chlorine atoms in a trans arrangement, displaying a distorted octahedral geometry. The two six‐membered chelate rings in three complex cations are oriented in an anti chair–chair conformation with respect to each other. The Cr–N and Cr–Cl bond lengths average 2.0862(2) and 2.3112(6) Å, respectively. The ZnCl₄^2– have slightly distorted tetrahedral arrangement with Zn–Cl lengths and the Cl–Zn–Cl angles are influenced by hydrogen bonding. The resolved absorption maxima in the electronic d–d spectrum were fitted with a secular determinant for a quartet energy state of the d³ configuration in a tetragonal field. It is confirmed that the nitrogen atoms of the Me₂tn ligand are strong σ donors, but the chloro ligands have weak σ‐ and π donor properties toward the chromium(III) ion.     

Transparent,Ultrahigh‐Gas‐Barrier Films with a Brick–Mortar–Sand Structure

Transparent and flexible gas‐barrier materials have shown broad applications in electronics, food, and pharmaceutical preservation. Herein, we report ultrahigh‐gas‐barrier films with a brick–mortar–sand structure fabricated by layer‐by‐layer (LBL) assembly of XAl‐layered double hydroxide (LDH, X=Mg, Ni, Zn, Co) nanoplatelets and polyacrylic acid (PAA) followed by CO₂ infilling, denoted as (XAl‐LDH/PAA)_n‐CO₂. The near‐perfectly parallel orientation of the LDH “brick” creates a long diffusion length to hinder the transmission of gas molecules in the PAA “mortar”. Most significantly, both the experimental studies and theoretical simulations reveal that the chemically adsorbed CO₂ acts like “sand” to fill the free volume at the organic–inorganic interface, which further depresses the diffusion of permeating gas. The strategy presented here provides a new insight into the perception of barrier mechanism, and the (XAl‐LDH/PAA)_n‐CO₂ film is among the best gas barrier films ever reported.     

ZnCr Layered Double Hydroxide (LDH) Nanosheets Assisted Formation of Hierarchical Flower‐Like CdZnS@LDH Microstructures with Improved Visible‐Light‐Driven H2 Production

The development of new semiconductor photocatalysts toward splitting water has supplied a promising way to obtain sustainable and clean hydrogen energy. Herein, CdZnS@layered double hydroxide (LDH) composites with a hierarchical flower‐like microstructure have been fabricated with the aid of ZnCr–LDH nanosheets as templates. XRD, SEM and HRTEM show that the ZnCr–LDH nanosheets are uniformly dispersed within the composites. The surface of the hierarchical structures is rough and composed of numerous nanocrystals of CdZnS. The HRTEM images indicate that the surface of CdZnS nanocrystals is mainly composed of the (111) plane. Moreover, the visible‐light‐driven H₂ production performance of the CdZnS in the presence and absence of ZnCr–LDH nanosheets has been measured. The results show that ZnCr–LDH nanosheets play an important role in the hierarchical morphology and photocatalytic activity of the as‐prepared samples. In the water‐splitting process, the visible‐light‐driven H₂‐production rate of hierarchical flower‐like CdZnS@LDH is 4.03 times and nearly 10 times higher than that of pristine CdZnS microsphere and pure commercial CdS, respectively. Therefore, this work not only achieves enhanced catalytic performance of the CdZnS by the introduction of ZnCr–LDH nanosheets, but also supplies an insight into the relationship between the hierarchical morphology and the semiconductor photocatalytic activity.     

Intercalation of Sulfanilic Acid‐Phenol‐Formaldehyde Polycondensate into Hydrocalumite Type Layered Double ­Hydroxide

Polycondensates containing sulfonate groups, referred to as concrete superplasticizers, are widely used in the construction industry. A sulfanilic acid–phenol–formaldehyde polycondensate (SPF) with M_w ≈ 100.000 g · mol^–1 was synthesized from sulfanilic acid, phenol and formaldehyde by polycondensation reaction, and its intercalation into hydrocalumite type Layered Double Hydroxide (LDH) was investigated. Preparation was done by rehydration of tricalcium aluminate, a cement constituent, in the presence of the polymer. According to the XRD pattern, SPF was successfully intercalated. A d value of approx. 2.6 nm was found. Elemental composition of the new organo‐mineral phase reveals charge balancing of the cationic LDH main layers by the polycondensate. Thermogravimetry indicates that thermal degradation of intercalated SPF occurs at higher temperature, compared to non‐intercalated SPF. According to SEM imaging, the novel Ca‐Al‐LDH phase exhibits the morphology of intergrown platelets. Ultra‐thin nanosheets (foils) with approx. 50 nm thickness were obtained. The layered structure and d value obtained from diffraction analysis were confirmed by TEM imaging. The new hydride can be used as cement and concrete additive.     

Graphene oxide sheet–polyaniline nanohybrids for enhanced photovoltaic performance of dye‐sensitized solar cells

In this study, photovoltaic (PV) properties of dye‐sensitized solar cells (DSSCs) incorporated with graphene oxide nanosheet‐polyaniline (GOS‐PANI) nanohybrid/poly(ethylene oxide) (PEO) blend gel electrolytes were investigated. Chemical structure and composition of GOS‐PANI nanohybrids were characterized by Raman spectroscopy and X‐ray photoelectron spectroscopy. The images of transmission electron microscopy revealed that PANI nanorods were anchored to the single‐layered GOS for the GOS‐PANI nanohybrids. Ionic conductivities of the GOS‐PANI/PEO–based gel electrolytes were measured using a conductivity meter. The electrochemical catalytic activities of the GOS‐PANI nanohybrids were determined through cyclic voltammetry. These GOS‐PANI nanohybrids were served as the extended electron transfer materials and catalyst for the electrochemical reduction of I₃^?. Due to the enhancement of the ionic conductivity and electrochemical catalytic activity of the gel electrolyte, better PV performance was observed for the DSSCs based on the GOS‐PANI containing electrolytes as compared to the pristine PEO electrolyte‐based DSSC sample. Moreover, PV performances of the GOS‐PANI/PEO–based DSSCs were closely related to the PANI content of GOS‐PANI nanohybrids. The highest photo‐energy conversion efficiency (5.63%) was obtained for an optimized GOS‐PANI/PEO (5:95, w/w) blend gel electrolyte‐based DSSC sample. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 321–332     

Construction of hole‐transported MoO3‐x coupled with CdS nanospheres for boosting photocatalytic performance via oxygen‐defects‐mediated Z‐scheme charge transfer

The establishment of Z‐scheme charge transfer between semiconductors is an effective method to improve the performance of hybridized semiconductor photocatalysts. Herein, the novel photocatalysts consisting of MoO_3‐x and varying amounts of cadmium sulfide (CdS) nanospheres were successfully prepared via the one‐pot hydrothermal method in the presence of polyvinylpyrrolidone (PVP). It is indicated that the PVP not only served as the reducing agent for the formation of oxygen defects in MoO_3‐x, but also the cross‐linking agent for the coupling between MoO_3‐x and CdS. The CdS/MoO_3‐x composite allowed for higher visible‐light photocatalytic performance for enhanced removal of methylene blue and tetracycline with an efficiency of 97.6% and 85.5%, respectively. The improved performance of the CdS/MoO_3‐x composite was found to be mainly attributable to the remarkable charge carrier separation and transfer between CdS and MoO_3‐x based on the favorable hole‐transporting nature and oxygen deficiencies of MoO_3‐x. In addition, the hole‐oxidized photocorrosion of CdS was efficiently suppressed due to the presence of hole‐attractive MoO_3‐x. At the solid interface, an oxygen‐defects‐mediated Z‐scheme charge carrier transfer pathway was proposed as the underlying mechanism for the superior photocatalytic reaction.     

Covalent and Non‐covalent Chemical Modification of Multi‐walled Carbon Nanotubes with Tetra‐(4‐hydroxylphenyl)porphyrin and Its Complexes

Multi‐walled carbon nanotubes (MWNTs) were covalently and non‐covalently functionalized with tetra‐(4‐hydroxylphenyl) porphyrin (THPPH₂) and its complexes (ZnTHPP) forming dispersible nanohybrids in organic solution. The morphology of the nanohybrids was observed with transmission electron microscopy. The structure of the product was characterized by FT‐IR, UV‐Vis spectrophotometer, fluorescence spectroscopy and thermogravimetric analysis. The photo‐induced electron‐transfer process of the nanohybrids in organic solution was also revealed.     

Development of air‐assisted dispersive micro‐solid‐phase extraction‐based supramolecular solvent‐mediated Fe3O4@Cu–Fe–LDH for the determination of tramadol in biological samples

A simple method, air‐assisted dispersive micro‐solid‐phase extraction‐based supramolecular solvent was developed for the preconcentration of tramadol in biological samples prior to gas chromatography–flame ionization detection. A new type of carrier liquid, supramolecular solvent based on a mixture of 1‐dodecanol and tetrahydrofuran was combined with layered double hydroxide coated on a magnetic nanoparticle (Fe₃O₄@SiO₂@Cu–Fe–LDH). The supramolecular solvent was injected into the solution containing Fe₃O₄@SiO₂@Cu–Fe–LDH in order to provide high stability and dispersion of the sorbent without any stabilizer agent. Air assisted was applied to enhance the dispersion of the sorbent and solvent. A number of analytical techniques such as Fourier transform‐infrared spectrometry, field emission scanning electron microscope, energy‐dispersive X‐ray spectroscopy and X‐ray diffraction measurements were applied to assess the surface chemical characteristics of Fe₃O₄@SiO₂@Cu–Fe–LDH nanoparticles. The effects of important parameters on the extraction recovery were also investigated. Under optimized conditions, the limits of detection and quantification were obtained in the range of 0.9–2.4 and 2.7–7.5 μg L^?1 with preconcentration factors in the range of 450–472 in biological samples. This method was used for the determination of tramadol in biological samples (plasma, urine and saliva samples) with good recoveries.     

Catalytic Gas‐phase Fluorination of Hexachlorobutadiene to 1,2‐Dichlorotetrafluorocyclobutene over Cr/Zn‐based Catalysts

In this paper, the gas‐phase fluorination of hexachlorobutadiene (HCBD) to synthesize 1,2‐dichlorotetrafluorocyclobutene (DTB) was carried out over a series of Cr/M/Zn catalysts (M = Ni, Co, Cu, In, Al). The influence of prefluorination by different fluorinating agents (HF, 95%HF + 5%Cl₂, 95%HF + 5%O₂, CF₂O, CF₂Cl₂) on catalytic performance of Cr/Co/Zn sample was also investigated. The addition of prompters to the Cr/Zn catalyst improved remarkably its catalytic properties. The Cr/Ni/Zn catalyst exhibited the best catalytic activity (1.318 mmol/h/g) at 390 °C and the Cr/Co/Zn catalyst showed the best DTB selectivity (42.5%) at 350 °C. Compared to that of gaseous HF, the catalytic performance of the Cr/Co/Zn catalyst after treatment by HF + O₂ and CF₂O increased considerably, whereas for HF + Cl₂ and CF₂Cl₂ it showed little effect. In order to identify the different species (Cr─O, Cr─F, CrO _xF _y) present on catalysts’ surface and determine their exact role, these catalysts before and after the reaction were characterized by X‐ray photoelectron spectroscopy. It was found that the concentration of the various species was responsible for the activity and lifetime of catalysts. Moreover, a possible reaction route is proposed based upon the product distribution. The most feasible formation pathway of DTB proceeded via the cyclization of C₄Cl₄F₂ or C₄Cl₃F₃ to yield c‐C₄Cl₄F₂ and c‐C₄Cl₃F₃ followed by further the Cl/F exchange.     

喜树碱插层的镁铝型层状双金属氢氧化物的合成及表征

采用共沉淀法把抗癌药物喜树碱（Camptothecin, CPT）插入层状双金属氢氧化物(layered double hydroxide, LDH)层间, 合成了CPT-LDH纳米杂化物。结果表明,在CPT-LDH纳米杂化物中,CPT在层间的排布方式有两种,即平行于层板的单层排列和垂直于层板的双层排列;缓释研究表明,CPT-LDH在pH 7.5的磷酸缓冲液中具有明显的缓释效果,其释放速率较相同pH值时CPT和LDH物理混合物的释放速率明显降低;考察了CPT-LDH的药物释放机理,在 pH 7.5的缓冲溶液中,释放过程受粒内扩散过程控制;CPT-LDH纳米杂化物的释放动力学符合准一级动力学过程。     

A three‐dimensional zinc‐based coordination polymer built from 5‐carboxylato‐1‐carboxylatomethyl‐2‐oxidopyridinium with a 4‐connected sra topology

A novel three‐dimensional Zn^II complex, poly[aqua(μ₄‐5‐carboxylato‐1‐carboxylatomethyl‐2‐oxidopyridinium)zinc(II)], [Zn(C₈H₅NO₄)(H₂O)]_n, has been prepared by hydrothermal assembly of Zn(CH₃COO)₂·2H₂O and 5‐carboxy‐1‐(carboxymethyl)pyridin‐1‐ium‐2‐olate (H₂ccop). The ccop²⁻ anions bridge the Zn^II cations in a head‐to‐tail fashion via monodentate aromatic carboxylate and phenolate O atoms to form an extended zigzag chain which runs parallel to the [011] direction. One O atom of the aliphatic carboxylate group of the ccop²⁻ ligand coordinates to the Zn^II atom of a neighbouring chain thereby producing undulating layers which lie parallel to the (01) plane. A similar parallel undulating planar structure can be obtained if a path involving the other O atom of the aliphatic carboxylate group is considered. Thus, the aliphatic carboxylate group acts in a bridging bidentate mode to give extended –Zn–O–C–O–Zn– sequences running parallel to [001] which link the layers into an overall three‐dimensional framework. The three‐dimensional framework can be simplified as a 4‐connected sra topology with a Schläfli symbol of 4².6³.8 if all the Zn^II centres and ccop²⁻ anions are regarded as tetrahedral 4‐connected nodes. The three‐dimensional luminescence spectrum was measured at room temperature with excitation and emission wavelengths of 344–354 and 360–630 nm, respectively, at intervals of 0.15 and 2 nm, respectively.     

Dehydrogenation of Isobutane to Isobutene with Carbon Dioxide over SBA‐15‐Supported Chromia‐Ceria Catalysts

A series of SBA‐15‐supported chromia‐ceria catalysts with 3% Cr and 1%–5% Ce (3Cr‐Ce/SBA) were prepared using an incipient wetness impregnation method. The catalysts were characterized by XRD, N₂ adsorption, SEM, TEM‐EDX, Raman spectroscopy, UV–vis spectroscopy, XPS and H₂‐TPR, and their catalytic performance for isobutane dehydrogenation with CO₂ was tested. The addition of ceria to SBA‐15‐supported chromia improves the dispersion of chromium species. 3Cr‐Ce/SBA catalysts are more active than SBA‐15‐supported chromia (3Cr/SBA), which is due to a higher concentration of Cr⁶⁺ species present on the former catalysts. The 3Cr‐3Ce/SBA catalyst shows the highest activity, which gives 35.4% isobutane conversion and 89.6% isobutene selectivity at 570 °C after 10 min of the reaction.     

Performance Enhancement of Bulk Heterojunction Solar Cells with Direct Growth of CdS‐Cluster‐Decorated Graphene Nanosheets

Two‐dimensional graphene–CdS (G–CdS) semiconductor hybrid nanosheets were synthesized in situ by graphene oxide (GO) quantum wells and a metal–xanthate precursor through a one‐step growth process. Incorporation of G–CdS nanosheets into a photoactive film consisting of poly[4,8‐bis‐(2‐ethyl‐hexyl‐thiophene‐5‐yl)‐benzo[1,2‐b:4,5‐b]dithiophene‐2,6‐diyl]‐alt‐[2‐(2‐ethyl‐hexanoyl)‐thieno[3,4‐b]thiophen‐4,6‐diyl] (PBDTTT‐C‐T) and [6,6]‐phenyl C₇₀ butyric acid methyl ester (PC₇₀BM) effectively decreases the exciton lifetime to accelerate exciton dissociation. More importantly, the decreasing energy levels of PBDTTT‐C‐T, PC₇₀BM, and G–CdS produces versatile heterojunction interfaces of PBDTTT‐C‐T:PC₇₀BM, PBDTTT‐C‐T:G–CdS, and PBDTTT‐C‐T:PC₇₀BM:G–CdS; this offers multi‐charge‐transfer channels for more efficient charge separation and transfer. The charge transfer in the blend film also depends on the G–CdS nanosheet loadings. In addition, G–CdS nanosheets improve light utilization and charge mobility in the photoactive layer. As a result, by incorporation of G–CdS nanosheets into the active layer, the power‐conversion efficiency of inverted solar cells based on PBDTTT‐C‐T and PC₇₁BM is improved from 6.0 % for a reference device without G–CdS nanosheets to 7.5 % for the device with 1.5wt % G–CdS nanosheets, due to the dramatically enhanced short‐circuit current. Combined with the advantageous mechanical properties of the PBDTTT‐C‐T:PC₇₀BM:G–CdS active layer, the novel CdS‐cluster‐decorated graphene hybrid nanomaterials provide a promising approach to improve the device performance.     

Highly Catalytic Carbon Nanotube/Pt Nanohybrid‐Based Transparent Counter Electrode for Efficient Dye‐Sensitized Solar Cells

Low‐cost transparent counter electrodes (CEs) for efficient dye‐sensitized solar cells (DSSCs) are prepared by using nanohybrids of carbon nanotube (CNT)‐supported platinum nanoparticles as highly active catalysts. The nanohybrids, synthesized by an ionic‐liquid‐assisted sonochemical method, are directly deposited on either rigid glass or flexible plastic substrates by a facile electrospray method for operation as CEs. Their electrochemical performances are examined by cyclic voltammetry, current density–voltage characteristics, and electrochemical impedance spectroscopy (EIS) measurements. The CNT/Pt hybrid films exhibit high electrocatalytic activity for I^?/I₃^? with a weak dependence on film thickness. A transparent CNT/Pt hybrid CE film about 100 nm thick with a transparency of about 70 % (at 550 nm) can result in a high power conversion efficiency (η) of over 8.5 %, which is comparable to that of pyrolysis platinum‐based DSSCs, but lower cost. Furthermore, DSSC based on flexible CNT/Pt hybrid CE using indium‐doped tin oxide‐coated polyethylene terephthalate as the substrate also exhibits η=8.43 % with J_sc=16.85 mA cm^?2, V_oc=780 mV, and FF=0.64, and this shows great potential in developing highly efficient flexible DSSCs.