Copper‐Catalyzed Site‐Selective Intramolecular Amidation of Unactivated C(sp3)H Bonds

The intramolecular dehydrogenative amidation of aliphatic amides, directed by a bidentate ligand, was developed using a copper‐catalyzed sp³ C? H bond functionalization process. The reaction favors predominantly the C? H bonds of β‐methyl groups over the unactivated methylene C? H bonds. Moreover, a preference for activating sp³ C? H bonds of β‐methyl groups, via a five‐membered ring intermediate, over the aromatic sp² C? H bonds was also observed in the cyclometalation step. Additionally, sp³ C? H bonds of unactivated secondary sp³ C? H bonds could be functionalized by favoring the ring carbon atoms over the linear carbon atoms.     

Surface oxidation process of a diamond‐like carbon film analyzed by difference X‐ray photoelectron spectroscopy

Difference X‐ray photoelectron spectroscopy (D‐XPS) revealed the surface oxidation process of a diamond‐like carbon (DLC) film. Evaluation of surface functional groups on DLC solely by the C 1s spectrum is difficult because the spectrum is broad and has a secondary asymmetric lineshape. D‐XPS clarified the subtle but critical changes at the DLC surface caused by wet oxidation. The hydroxyl (C―OH) group was dominant at the oxidized surface. Further oxidized carbonyl (C?O) and carboxyl (including carboxylate) (COO) groups were also obtained; however, the oxidation of C?O to COO was suppressed to some extent because the reaction required C―C bond cleavage. Wet oxidation cleaved the aliphatic hydrogenated and non‐hydrogenated sp² carbon bonds (C―H sp² and C―C sp²) to create a pair of C―OH and hydrogenated sp³ carbon (C―H sp³) bonds. The reaction yield for C―H sp² was superior at the surface, suggesting that the DLC film was hydrogen rich at the surface. Oxidation of aromatic sp² rings or polycyclic aromatic hydrocarbons such as nanographite to phenols did not occur because of their resonance stabilization with electron delocalization. Non‐hydrogenated sp³ carbon (C―C sp³) bonds were not affected by oxidation, suggesting that these bonds are chemically inert. Copyright © 2014 John Wiley & Sons, Ltd.     

Nickel‐Catalyzed Site‐Selective Amidation of Unactivated C(sp3)H Bonds

Intramolecular dehydrogenative cyclization of aliphatic amides was achieved on unactivated sp³ carbon atoms by a nickel‐catalyzed C?H bond functionalization process with the assistance of a bidentate directing group. The reaction favors the C?H bonds of β‐methyl groups over the γ‐methyl or β‐methylene groups. Additionally, a predominant preference for the β‐methyl C?H bonds over the aromatic sp² C?H bonds was observed. Moreover, this process also allows for the effective functionalization of benzylic secondary sp³ C?H bonds.     

Redox‐Neutral Coupling between Two C(sp3)−H Bonds Enabled by 1,4‐Palladium Shift for the Synthesis of Fused Heterocycles

The intramolecular coupling of two C(sp³)?H bonds to forge a C(sp³)?C(sp³) bond is enabled by 1,4‐Pd shift from a trisubstituted aryl bromide. Contrary to most C(sp³)?C(sp³) cross‐dehydrogenative couplings, this reaction operates under redox‐neutral conditions, with the C?Br bond acting as an internal oxidant. Furthermore, it allows the coupling between two moderately acidic primary or secondary C?H bonds, which are adjacent to an oxygen or nitrogen atom on one side, and benzylic or adjacent to a carbonyl group on the other side. A variety of valuable fused heterocycles were obtained from easily accessible ortho‐bromophenol and aniline precursors. The second C?H bond cleavage was successfully replaced with carbonyl insertion to generate other types of C(sp³)‐C(sp³) bonds.     

Direct sp3 C?H Amination of Nitrogen‐Containing Benzoheterocycles Mediated by Visible‐Light‐Photoredox Catalysts

Visible‐light‐mediated direct sp³ C? H amination of benzocyclic amines via α‐aminoalkyl radicals by using photoredox catalysts is described here. The obtained N,N‐acetals were also successfully applied for carbon–carbon bond forming reactions with carbon nucleophiles. The procedure is suitable for a late‐stage modification of C? H bonds to C? C bonds.     

Copper‐Catalyzed Site‐Selective Intramolecular Amidation of Unactivated C(sp3)?H Bonds

The intramolecular dehydrogenative amidation of aliphatic amides, directed by a bidentate ligand, was developed using a copper‐catalyzed sp³ C H bond functionalization process. The reaction favors predominantly the C H bonds of β‐methyl groups over the unactivated methylene C H bonds. Moreover, a preference for activating sp³ C H bonds of β‐methyl groups, via a five‐membered ring intermediate, over the aromatic sp² C H bonds was also observed in the cyclometalation step. Additionally, sp³ C H bonds of unactivated secondary sp³ C H bonds could be functionalized by favoring the ring carbon atoms over the linear carbon atoms.     

Gold(I)-Catalyzed Intramolecular C(sp3)−H Insertion by Decarbenation of Cycloheptatrienes

A novel synthesis of indanes and dihydronaphtalenes based on the intramolecular insertion into C(sp³)−H bonds of gold(I) carbenes generated by retro-Buchner reaction (decarbenation) has been developed. Deuterium-labeling and kinetic isotope effect experiments, DFT calculations, and generation of the proposed carbene intermediate from a well-characterized gold(I) carbenoid support the involvement of a three-center concerted mechanism for the C(sp³)−H functionalization process.     

Palladium/Norbornene‐Catalyzed C−H Alkylation/Alkyne Insertion/Indole Dearomatization Domino Reaction: Assembly of Spiroindolenine‐Containing Pentacyclic Frameworks

Reported is a highly chemoselective intermolecular annulation of indole‐based biaryls with bromoalkyl alkynes by using palladium/norbornene (Pd/NBE) cooperative catalysis. This reaction is realized through a sequence of Catellani‐type C?H alkylation, alkyne insertion, and indole dearomatization, by forming two C(sp²)?C(sp³) and one C(sp²)?C(sp²) bonds in a single chemical operation, thus providing a diverse range of pentacyclic molecules, containing a spiroindolenine fragment, in good yields with excellent functional‐group tolerance. Preliminary mechanistic studies reveal that C?H bond cleavage is likely involved in the rate‐determining step, and the indole dearomatization might take place through an olefin coordination/insertion and β‐hydride elimination Heck‐type pathway.     

The Redox‐Neutral Approach to C?H Functionalization

The direct functionalization of C? H bonds is an attractive strategy in organic synthesis. Although several advances have been made in this area, the selective activation of inert sp³ C? H bonds remains a daunting challenge. Recently, a new type of sp³ C? H activation mode through internal hydride transfer has demonstrated the potential to activate remote sp³ C? H linkages in an atom‐economic manner. This Minireview attempts to classify recent advances in this area including the transition to non‐activated sp³ C? H bonds and asymmetric hydride transfers.     

Iridium‐Catalyzed Synthesis of Diaryl Ethers by Means of Chemoselective CF Bond Activation and the Formation of BF Bonds

Transition‐metal‐catalyzed C? F activation, in comparison with C? H activation, is more difficult to achieve and therefore less fully understood, mainly because carbon–fluorine bonds are the strongest known single bonds to carbon and have been very difficult to cleave. Transition‐metal complexes are often more effective at cleaving stronger bonds, such as C(sp²)? X versus C(sp³)? X. Here, the iridium‐catalyzed C? F activation of fluorarenes was achieved through the use of bis(pinacolato)diboron with the formation of the B? F bond and self‐coupling. This strategy provides a convenient method with which to convert fluoride aromatic compounds into symmetrical diaryl ether compounds. Moreover, the chemoselective products of the C? F bond cleavage were obtained at high yields with the C? Br and C? Cl bonds remaining.     

Iridium‐Catalyzed Intermolecular Dehydrogenative Silylation of Polycyclic Aromatic Compounds without Directing Groups

This study describes the iridium‐catalyzed intermolecular dehydrogenative silylation of C(sp²)?H bonds of polycyclic aromatic compounds without directing groups. The reaction produced various arylsilanes through both Si?H and C?H bond activation, with hydrogen as the sole byproduct. Reactivity was affected by the electronic nature of the aromatic compounds, and silylation of electron‐deficient and polycyclic aromatic compounds proceeded efficiently. Site‐selectivity was controlled predominantly by steric factors. Therefore, the current functionalization proceeded with opposite chemo‐ and site‐selectivity compared to that observed for general electrophilic functionalization of aromatic compounds.     

Iridium(III)‐Catalyzed Intermolecular C(sp3)−H Insertion Reaction of Quinoid Carbene: A Radical Mechanism

Described herein is an Ir^III/porphyrin‐catalyzed intermolecular C(sp³)?H insertion reaction of a quinoid carbene (QC). The reaction was designed by harnessing the hydrogen‐atom transfer (HAT) reactivity of a metal‐QC species with aliphatic substrates followed by a radical rebound process to afford C?H arylation products. This methodology is efficient for the arylation of activated hydrocarbons such as 1,4‐cyclohexadienes (down to 40 min reaction time, up to 99 % yield, up to 1.0 g scale). It features unique regioselectivity, which is mainly governed by steric effects, as the insertion into primary C?H bonds is favored over secondary and/or tertiary C?H bonds in the substituted cyclohexene substrates. Mechanistic studies revealed a radical mechanism for the reaction.     

Nickel‐Catalyzed Insertion of Alkynes and Electron‐Deficient Olefins into Unactivated sp3 CH Bonds

Insertion of unsaturated systems such as alkynes and olefins into unactivated sp³ C?H bonds remains an unexplored problem. We herein address this issue by successfully incorporating a wide variety of functionalized alkynes and electron‐deficient olefins into the unactivated sp³ C?H bond of pivalic acid derivatives with excellent syn‐ and linear‐ selectivity. A strongly chelating 8‐aminoquinoline directing group proved beneficial for these insertion reactions, while an air‐stable and inexpensive Ni^II salt has been employed as the active catalyst.     

Merging Photochemistry with Electrochemistry: Functional‐Group Tolerant Electrochemical Amination of C(sp3)−H Bonds

Direct amination of C(sp³)?H bonds is of broad interest in the realm of C?H functionalization because of the prevalence of nitrogen heterocycles and amines in pharmaceuticals and natural products. Reported here is a combined electrochemical/photochemical method for dehydrogenative C(sp³)?H/N?H coupling that exhibits good reactivity with both sp² and sp³ N?H bonds. The results show how use of iodide as an electrochemical mediator, in combination with light‐induced cleavage of intermediate N?I bonds, enables the electrochemical process to proceed at low electrode potentials. This approach significantly improves the functional‐group compatibility of electrochemical C?H amination, for example, tolerating electron‐rich aromatic groups that undergo deleterious side reactions in the presence of high electrode potentials.     

A Sterically Constrained Tricyclic PC3 Phosphine: Coordination Behavior and Insertion of Chalcogen Atoms into P−C Bonds

A tricyclic phosphine has been generated that has a rigid molecular backbone with the P atoms exclusively bound to C(sp²) atoms as well as a very large Tolman angle and buried volume. It is an interesting new ligand in coordination chemistry (Au, Pd complexes) and shows unusual insertion reactions into its endocyclic P?C bonds facilitated by its inherent molecular strain.     

Formation of a C–C double bond from two aliphatic carbons. Multiple C–H activations in an iridium pincer complex

The search for novel, atom-economic methods for the formation of C–C bonds is of crucial importance in synthetic chemistry. Especially attractive are reactions where C–C bonds are formed through C–H activation, but the coupling of unactivated, alkane-type C_sp³–H bonds remains an unsolved challenge. Here, we report iridium-mediated intramolecular coupling reactions involving up to four unactivated C_sp³–H bonds to give carbon–carbon double bonds under the extrusion of dihydrogen. The reaction described herein is completely reversible and the direction can be controlled by altering the reaction conditions. With a hydrogen acceptor present a C–C double bond is formed, while reacting under dihydrogen pressure leads to the reverse process, with some of the steps representing net C_sp³–C_sp³ bond cleavage. Mechanistic investigations revealed a conceptually-novel overall reactivity pattern where insertion or deinsertion of an Ir carbene moiety, formed via double C–H activation, into an Ir–C bond is responsible for the key C–C bond formation and cleavage steps.     

Photo‐induced Substitutive Introduction of the Aldoxime Functional Group to Carbon Chains: A Formal Formylation of Non‐Acidic C(sp3)−H Bonds

A photo‐induced substitutive introduction of an aldoxime functional group to carbon chains was achieved using photo‐excited 4‐benzoylpyridine as a C(sp³)?H bond cleaving agent and arylsulfonyl oxime as an aldoxime precursor. The non‐acidic C?H bonds in various substances, including cycloalkanes, ethers, azacycles, and cyclic sulfides, were chemoselectively converted at ambient temperature under neutral conditions. The present transformation is a formal formylation of non‐acidic C(sp³)?H bonds in a single step.     

Rhodium(I)‐Catalyzed Sequential C(sp)C(sp3) and C(sp3)C(sp3) Bond Formation through Migratory Carbene Insertion

A Rh^I‐catalyzed three‐component reaction of tert‐propargyl alcohol, diazoester, and alkyl halide has been developed. This reaction can be considered as a carbene‐involving sequential alkyl and alkynyl coupling, in which C(sp)? C(sp³) and C(sp³)? C(sp³) bonds are built successively on the carbenic carbon atom. The Rh^I‐carbene migratory insertion of an alkynyl moiety and subsequent alkylation are proposed to account for the two separate C? C bond formations. This reaction provides an efficient and tunable method for the construction of all‐carbon quaternary center.     

Copper(I)‐Catalyzed Alkylation of Polyfluoroarenes through Direct CH Bond Functionalization

The copper(I)‐catalyzed alkylation of electron‐deficient polyfluoroarenes with N‐tosylhydrazones and diazo compounds has been developed. This reaction uses readily available starting materials and is operationally simple, thus representing a practical method for the construction of C(sp²)? C(sp³) bonds with polyfluoroarenes through direct C? H bond functionalization. Mechanistically, copper(I) carbene formation and subsequent migratory insertion are proposed as the key steps in the reaction pathway.     

Site‐Selective δ‐C(sp3)−H Alkylation of Amino Acids and Peptides with Maleimides via a Six‐Membered Palladacycle

The site‐selective functionalization of unactivated C(sp³)?H bonds remains one of the greatest challenges in organic synthesis. Herein, we report on the site‐selective δ‐C(sp³)?H alkylation of amino acids and peptides with maleimides via a kinetically less favored six‐membered palladacycle in the presence of more accessible γ‐C(sp³)?H bonds. Experimental studies revealed that C?H bond cleavage occurs reversibly and preferentially at γ‐methyl over δ‐methyl C?H bonds while the subsequent alkylation proceeds exclusively at the six‐membered palladacycle that is generated by δ‐C?H activation. The selectivity can be explained by the Curtin–Hammett principle. The exceptional compatibility of this alkylation with various oligopeptides renders this procedure valuable for late‐stage peptide modifications. Notably, this process is also the first palladium(II)‐catalyzed Michael‐type alkylation reaction that proceeds through C(sp³)?H activation.