Regioselective Transition‐Metal‐Free Allyl–Allyl Cross‐Couplings

Readily prepared allylic zinc halides undergo S_N2‐type substitutions with allylic bromides in a 1:1 mixture of THF and DMPU providing 1,5‐dienes regioselectively. The allylic zinc species reacts at the most branched end (γ‐position) of the allylic system furnishing exclusively γ,α′‐allyl–allyl cross‐coupling products. Remarkably, the double bond stereochemistry of the allylic halide is maintained during the cross‐coupling process. Also several functional groups (ester, nitrile) are tolerated. This cross‐coupling of allylic zinc reagents can be extended to propargylic and benzylic halides. DFT calculations show the importance of lithium chloride in this substitution.     

Transition‐Metal‐Free BF3‐Mediated Oxidative and Non‐Oxidative Cross‐Coupling of Pyridines

We report a BF₃‐mediated direct alkynylation of pyridines at C(2) by using a variety of alkynyllithium reagents (oxidative cross‐coupling). Moreover, we have developed a novel transition‐metal‐free cross‐coupling method between alkylmagnesium reagents and 4‐substituted pyridines, such as isonicotinonitrile and 4‐chloropyridine, by employing BF₃?OEt₂ as a promoter. The combination of these methods enabled us to efficiently prepare a range of di‐, tri‐, and tetrasubstituted pyridines.     

Conformation‐Determined Through‐Bond versus Through‐Space Electronic Communication in Mixed‐Valence Systems with a Cross‐Conjugated Urea Bridge

Bis‐triarylamine 2 and cyclometalated diruthenium 6 (PF₆)₂ with a linear trans,trans‐urea bridge have been prepared, together with the bis‐triarylamine 3 and cyclometalated diruthenium 8 (PF₆)₂ with a folded cis,cis‐N,N‐dimethylurea bridge. The linear or folded conformations of these molecules are supported by single‐crystal X‐ray structures of 2 , 3 , and other related compounds. These compounds display two consecutive anodic redox waves (N ^{. +/0} or Ru^III/II processes) with a potential separation of 110–170 mV. This suggests that an efficient electronic coupling is present between two redox termini through the cross‐conjugated urea bridge. The degree of electronic coupling has been investigated by using spectroelectrochemical measurements. Distinct intervalence charge‐transfer (IVCT) transitions have been observed for mixed‐valent (MV) compounds with a linear conformation. The IVCT transitions can also be identified for the folded MV compounds, albeit with a much weaker intensity. DFT results support that the electronic communication occurs by a through‐bond and through‐space pathway for the linear and folded compounds, respectively. The IVCT transitions of the MV compounds have been reproduced by TDDFT calculations. For the purpose of comparison, a bistriarylamine and a diruthenium complex with an imidazolidin‐2‐one bridge and a urea‐containing mono‐triarylamine and monoruthenium complex have been synthesized and studied.     

Transition‐Metal‐Free Oxidative Cross‐Coupling of Tetraarylborates to Biaryls Using Organic Oxidants

Readily prepared tetraarylborates undergo selective (cross)‐coupling through oxidation with Bobbitt's salt to give symmetric and unsymmetric biaryls. The organic oxoammonium salt can be used either as a stoichiometric oxidant or as a catalyst in combination with in situ generated NO₂ and molecular oxygen as the terminal oxidant. For selected cases, oxidative coupling is also possible with NO₂/O₂ without any additional nitroxide‐based cocatalyst. Transition‐metal‐free catalytic oxidative ligand cross‐coupling of tetraarylborates is unprecedented and the introduced method provides access to various biaryl and heterobiaryl systems.     

Room temperature suzuki cross‐coupling polymerizations of aryl dihalides and aryldiboronic acid/acid esters with t‐Bu3P‐coordinated 2‐phenylaniline‐based palladacycle complex as the precatalyst

Room temperature Suzuki cross‐coupling polymerization of aryl dibromides/diiodides with aryldiboronic acids/acid esters with t‐Bu₃P‐coordinated 2‐phenylaniline‐based palladacycle complex, [2′‐(amino‐kN)[1,1′‐biphenyl]‐2‐yl‐kC]chloro(tri‐t‐butylphosphine)palladium, as a general precatalyst is described. Such room temperature Suzuki cross‐coupling polymerization is achieved by employing six equivalents or more of the base and affords polymers within an hour, with the yields and the molecular weights in general comparable to or higher than reported results that required higher reaction temperature and/or longer polymerization time. Our study provides a general catalyst system for the room temperature Suzuki cross‐coupling polymerization of aryl dibromides/diiodides with aryldiboronic acids/acid esters and paves the road for the investigation of employing other monodentate ligand‐coordinated palladacycle complexes including other electron‐rich monophosphine‐coordinated ones for room temperature cross‐coupling polymerizations. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1606–1611     

Nickel‐Catalyzed Cross‐Electrophile Coupling of Aryl Bromides with Pyrimidin‐2‐yl Tosylates

A new protocol for the NiCl₂ ‐catalyzed cross‐electrophile coupling of aryl bromides with pyrimidin‐2‐yl tosylates to give the corresponding C2 ‐arylation pyrimidine derivatives has been developed. This study provides an improvement over previous methods by using pyrimidin‐2‐yl tosylates instead of halides as coupling partners that are stable and easily available.     

Stereospecific synthesis of a family of novel (E)‐2‐aryl‐1‐silylalka‐1,4‐dienes or (E)‐4‐aryl‐5‐silylpenta‐1,2,4‐trienes via a cross‐coupling of (Z)‐silyl(stannyl)ethenes with allyl halides or propargyl bromide

Stereospecific synthesis of a family of novel (E)‐2‐aryl‐1‐silylalka‐1,4‐dienes or (E)‐4‐aryl‐5‐silylpenta‐1,2,4‐trienes via a cross‐coupling of (Z)‐silyl(stannyl)ethenes with allyl halides or propargyl bromide is described. In the reaction with allyl bromide, either a Pd(dba)₂? CuI combination (dba, dibenzylideneacetone) in DMF or copper(I) iodide in DMSO–THF readily catalyzes or mediates the coupling reaction of (Z)‐silyl(stannyl)ethenes at room temperature, producing novel vinylsilanes bearing an allyl group β to silicon with cis ‐disposition in good yields. Allyl chlorides as halides can be used in the CuI‐mediated reaction. CuI alone much more effectively mediates the cross‐coupling reaction with propargyl bromide in DMSO–THF at room temperature compared with a Pd(dba)₂? CuI combination catalysis in DMF, providing novel stereodefined vinylsilanes bearing an allenyl group β to silicon with cis ‐disposition in good yields. Copyright © 2008 John Wiley & Sons, Ltd.     

Palladium‐catalyzed synthesis of 8‐allyl or 8‐prenylcoumarins by using organotin reagents as multicoupling nucleophiles

In this study, 8‐iodocoumarin derivatives underwent a direct Stille cross‐coupling reaction with several organotin compounds in the presence of a catalytic amount of Pd(PPh₃)₄ in DMF at 80 °C. The cross‐coupling reaction proceeded smoothly under mild conditions and permitted the formation of 8‐allyl or 8‐prenylcoumarin compounds in good yields. Copyright © 2012 John Wiley & Sons, Ltd.     

Facile Synthesis and Palladium‐Catalyzed Cross‐Coupling Reactions of 2,3‐Bis(pinacolatoboryl)‐1,3‐butadiene

Treatment of 1,1‐bis(pinacolatoboryl)ethene with an excess of 1‐bromo‐1‐lithioethene gave 2,3‐bis(pinacolatoboryl)‐1,3‐butadiene in high yield. Palladium‐catalyzed cross‐coupling of the resulting diborylbutadiene with aryl iodides took place smoothly in the presence of a catalytic amount of Pd(OAc)₂/PPh₃ and aqueous KOH to give 2,3‐diaryl‐1,3‐butadienes in good yields. The coupling reaction with commercially available 4‐acetoxyphenylmethyl chloride under the same conditions followed by hydrolysis of the acetyl groups gave anolignan B in a one‐pot manner. A variety of [3]‐ to [6]dendralenes were synthesized by palladium‐catalyzed coupling of the diene or 1,1‐bis(pinacolato)borylethene with alkenyl or dienyl halides, respectively, in good yields.     

Single‐Electron‐Transfer‐Induced Coupling of Arylzinc Reagents with Aryl and Alkenyl Halides

Arylzinc reagents, prepared from aryl halides/zinc powder or aryl Grignard reagents/zinc chloride, were found to undergo coupling with aryl and alkenyl halides without the aid of transition‐metal catalysis to give biaryls and styrene derivatives, respectively. In this context, we have already reported the corresponding reaction using aryl Grignard reagents instead of arylzinc reagents. Compared with the Grignard cross‐coupling, the present reaction features high functional‐group tolerance, whereby electrophilic groups such as alkoxycarbonyl and cyano groups are compatible as substituents on both the arylzinc reagents and the aryl halides. Aryl halides receive a single electron and thereby become activated as the corresponding anion radicals, which react with arylzinc reagents, thus leading to the cross‐coupling products.     

Ligand‐Promoted Oxidative Cross‐Coupling of Aryl Boronic Acids and Aryl Silanes by Palladium Catalysis

The first cross‐coupling reaction between aryl silanes and aryl boronic acids is described. This transformation represents one of the very few examples of coupling reactions between two nucleophilic organometallic reagents and provides a new method for the formation of biaryl compounds. The successful development of this reaction was enabled by the use of commercially available 2,2′‐bis(diphenylphosphino)‐1,1′‐binaphthyl (BINAP) as the ligand. A small amount of BINAP (3 mol %) was sufficient to suppress the formation of the homocoupling products, and the reaction yielded the cross‐coupling products with high selectivity under mild conditions, even when the ratio of the two coupling partners was 1:1.     

CC Coupling of N‐Heterocycles at the fac‐Re(CO)3 Fragment: Synthesis of Pyridylimidazole and Bipyridine Ligands

A new family of cationic rhenium tricarbonyl complexes with either two N‐alkylimidazole (N‐RIm) and one pyridine (Py) ligand, or two pyridine and one N‐RIm ligand, [Re(CO)₃(N‐RIm)_(3?x)(Py)_x]⁺, has been prepared. The reaction of these complexes with a strong base, followed by an oxidant, selectively afforded 2,2’‐pyridylimidazole complexes as the result of intramolecular dehydrogenative C?C coupling reactions. For tris(pyridine) complexes [Re(CO)₃(Py)₃]⁺ the reaction pattern upon a deprotonation/oxidation sequence is maintained, which allows the generation of complexes with 2,2’‐bipyridine ligands. In the particular combination of two different types of pyridine ligand in the cationic fac‐Re(CO)₃ complexes only the cross‐coupling products with asymmetric 2,2’‐bipyridine ligands were obtained; the homocoupling products were not observed.     

Palladium‐Catalyzed Suzuki–Miyaura Cross‐Coupling of Secondary α‐(Trifluoromethyl)benzyl Tosylates

A palladium‐catalyzed C(sp³)−C(sp²) Suzuki–Miyaura cross‐coupling of aryl boronic acids and α‐(trifluoromethyl)benzyl tosylates is reported. A readily available, air‐stable palladium catalyst was employed to access a wide range of functionalized 1,1‐diaryl‐2,2,2‐trifluoroethanes. Enantioenriched α‐(trifluoromethyl)benzyl tosylates were found to undergo cross‐coupling to give the corresponding enantioenriched cross‐coupled products with an overall inversion in configuration. The crucial role of the CF₃ group in promoting this transformation is demonstrated by comparison with non‐fluorinated derivatives.     

Palladium‐catalysed Suzuki reaction of aryl chlorides in aqueous media using 1,3‐dialkylimidazolidin‐2‐ylidene ligands

A highly effective, easy to handle and environmentally benign process for palladium‐mediated Suzuki cross‐coupling is developed. The in situ prepared three‐component system Pd(OAc)₂–1,3‐bis(alkyl)imidazolinium chlorides (2a–f) and Cs₂CO₃ catalyses quantitatively the Suzuki cross‐coupling of deactivated aryl chlorides. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis of 2‐Aryl‐ and 2‐Heteroaryl‐3,5‐dimethoxy‐1,4‐benzoquinones Involving Pd‐Catalyzed Cross‐Coupling of (2,3,4,6‐Tetramethoxyphenyl)boronic Acid

A series of 2‐aryl‐ and 2‐heteroaryl‐substituted 3,5‐dimethoxy‐1,4‐benzoquinones (compounds 27 – 36 ) have been synthesized by cross‐coupling of (2,3,4,6‐tetramethoxyphenyl)boronic acid ( 2 ) with aromatic bromides or iodides in the presence of [Pd⁰(Ph₃)₄] and Na₂CO₃, followed by AgO‐promoted oxidation of the resulting biaryl compounds 17 – 26 .     

Palladium‐Catalyzed Cross‐Coupling of Alkenyl Carboxylates

Carboxylate esters have many desirable features as electrophiles for catalytic cross‐coupling: they are easy to access, robust during multistep synthesis, and mass‐efficient in coupling reactions. Alkenyl carboxylates, a class of readily prepared non‐aromatic electrophiles, remain difficult to functionalize through cross‐coupling. We demonstrate that Pd catalysis is effective for coupling electron‐deficient alkenyl carboxylates with arylboronic acids in the absence of base or oxidants. Furthermore, these reactions can proceed by two distinct mechanisms for C?O bond activation. A Pd^0/II catalytic cycle is viable when using a Pd⁰ precatalyst, with turnover‐limiting C?O oxidative addition; however, an alternative pathway that involves alkene carbopalladation and β‐carboxyl elimination is proposed for Pd^II precatalysts. This work provides a clear path toward engaging myriad oxygen‐based electrophiles in Pd‐catalyzed cross‐coupling.     

Electron‐Catalyzed Cross‐Coupling of Arylboron Compounds with Aryl Iodides

Arylboroxines in combination with zinc chloride and potassium tert‐butoxide were found to undergo the electron‐catalyzed cross‐coupling with aryl iodides to give the corresponding biaryls without the aid of transition‐metal catalysis.     

Palladium‐catalysed P?C bond forming reactions between diphenylphosphine and ortho‐substituted aryl bromides

The use of palladium catalysts derived from 1,1′‐bis‐diisopropylphosphino‐ferrocene and a microwave heating source allows the coupling of a range of ortho‐substituted aryl bromides to diphenylphosphine derivatives to proceed in good yield in under 30 min. Optimization studies reveal that the combination of diphenylphosphine and DABCO is superior to more basic phosphide nucleophiles such as Ph₂PK or Ph₂PMgBr. High yields are only observed when moderately bulky electron rich diphosphines are used as ligands. The differences between P? C coupling and other cross‐coupling reactions are discussed in the light of the reactivity observed. Studies aimed at producing industrially important 1,2‐bis‐phosphino‐benzene ligands are also described. Copyright © 2009 John Wiley & Sons, Ltd.     

Highly selective oxidative cross‐coupling polymerization with copper(I)‐bisoxazoline catalysts

The asymmetric oxidative coupling polymerization of methyl 6,6′‐dihydroxy‐2,2′‐binaphthalene‐7‐carboxylate with the copper‐diamine catalysts under an O₂ atmosphere was carried out. As is the case with the CuCl‐2,2′‐(S)‐isopropylidenbis(4‐phenyl‐2‐oxazoline) [(S)IPhO] catalyst, a polymer with a high cross‐coupling selectivity of 96% was obtained in 71% yield, whose THF‐soluble part had a number‐average molecular weight of 4.5 × 10³. To estimate the enantioselectivity with respect to the cross‐coupling linkage in the obtained polymer, the model asymmetric oxidative cross‐coupling reaction with CuCl‐(S)IPhO was also conducted, and the products showed a 94% cross‐coupling selectivity and enantioselectivity of 31% ee (S). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6287–6294, 2005     

Direct Cross‐Couplings of Propargylic Diols

[Pd(PPh₃)₄] catalyzes a Suzuki–Miyaura‐like twofold cross‐coupling sequence between underivatized propargylic diols and either aryl or alkenyl boronic acids to furnish highly substituted 1,3‐dienes. Thus, 2,3‐diaryl‐1,3‐butadienes and their dialkenic congeners ([4]dendralenes) are delivered in a (pseudo)halogen‐free, single‐step synthesis which supersedes existing methods. Allenols are also readily formed. Treatment of these single‐ and twofold cross‐coupled products with acid leads to remarkably short syntheses of highly‐substituted benzofulvenes and aryl indenes, respectively.