Theoretical insights into the relative bonding of normal and abnormal N‐heterocyclic carbenes in [PdCl2(NHCR)2] and [PdCl2(NHCR)(aNHCR)] (R = H,Ph, Mes)

Quantum chemical insights into normal Pd‐C2(NHC^R) and abnormal Pd‐C5(aNHC^R) bonding, dominated by dispersion interactions in N‐hetereocyclic carbene complexes [PdCl₂(NHC^R)₂] ( I , R = H; II , R = Ph; III , R = Mes (2,4,6‐trimethyl)phenyl)) and [PdCl₂(NHC^R)(aNHC^R] ( IV , R = H; V , R = Ph; VI , R = Mes) have been investigated at DFT and DFT‐D3(BJ) level of theory with particular emphasis on the effects of the noncovalent interactions on the structures and the nature of Pd‐C2(NHC^R) and Pd‐C5(aNHC^R) bonds. The optimized geometries are good agreement with the experimental values. The Pd‐C bonds are essentially single bond. Hirshfeld charge distributions indicate that the abnormal aNHC^R carbene ligand is relatively better electron donor than the normal NHC^R carbene ligand. The C2 atom has larger %s contribution along Pd‐C2 bond than the C5 atom along Pd‐C5 bond. As a consequence the Pd‐C2(NHC^R) bonds are relative stronger than the Pd‐C5(aNHC^R) bonds. Thus, the results of natural hybrid orbital analysis support the key point of the present study. Calculations predict that for bulky substituent (R = Ph, Mes) at carbene, the Pd‐C2(NHC^R) bond is stronger than Pd‐C5(aNHC^R) bond due to large dispersion energy in [PdCl₂(NHC^R)₂] than in [PdCl₂(NHC^R)(aNHC^R)]. However, in case of non‐bulky substituent with small and almost equal contribution of dispersion energy, the Pd‐C2(NHC^R) bond is relative weaker than Pd‐C5(aNHC^R) bond. The bond dissociation energies are dependent on the R substituent, the DFT functional and the inclusion of dispersion interactions. Major point of this study is that the abnormal aNHCs are not always strongly bonded with metal center than the normal NHCs. Effects of dispersion interaction of substituent at nitrogen atoms of carbene ligand are found to play a crucial role on estimation of relative bonding strengths of the normal and abnormal aNHCs with metal center. © 2016 Wiley Periodicals, Inc.     

Carbene‐Stabilized Phosphenium Oxides and Sulfides

Carbene→chalcogenophosphenium adducts, which correspond to an intermolecular stabilization mode of the so far elusive, free oxo‐ and thiooxophosphenium species [R₂P⁺ = X] (X=O, S) by imidazolylidene (NHC) and diaminocyclopropenylidene (BAC) donors, have been isolated and fully characterized. The dative character of the R₂C:→P⁺(X)Ph₂ bond was confirmed experimentally by nucleophilic displacement of the carbene donor with a chloride ion and by an exchange reaction of the NHC ligand of the NHC:→P⁺(O)Ph₂ adduct with an independently prepared BAC ligand, thereby giving the BAC:→P⁺(O)Ph₂ adduct. This dative character was further characterized by the DFT‐calculated preference of carbene→chalcogenophosphenium systems for a heterolytic dissociation mode over a homolytic one.     

Ionic Pd/NHC Catalytic System Enables Recoverable Homogeneous Catalysis: Mechanistic Study and Application in the Mizoroki–Heck Reaction

N-Heterocyclic carbene (NHC) ligands are ubiquitously utilized in catalysis. A common catalyst design model assumes strong M–NHC binding in this metal–ligand framework. In contrast to this common assumption, we demonstrate here that lability and controlled cleavage of the M−NHC bond (rather than its stabilization) could be more important for high-performance catalysis at low catalyst concentrations. The present study reveals a dynamic stabilization mechanism with labile metal–NHC binding and [PdX₃]⁻[NHC-R]⁺ ion pair formation. Access to reactive anionic palladium intermediates formed by dissociation of the NHC ligands and plausible stabilization of the molecular catalyst in solution by interaction with the [NHC-R]⁺ azolium ion is of particular importance for an efficient and recyclable catalyst. These ionic Pd/NHC complexes allowed for the first time the recycling of the complex in a well-defined form with isolation at each cycle. Computational investigation of the reaction mechanism confirms a facile formation of NHC-free anionic Pd in polar media through either Ph–NHC coupling or reversible H–NHC coupling. The present study formulates novel ideas for M/NHC catalyst design.     

Elevated Catalytic Activity of Ruthenium(II)–Porphyrin‐Catalyzed Carbene/Nitrene Transfer and Insertion Reactions with N‐Heterocyclic Carbene Ligands

Bis(NHC)ruthenium(II)–porphyrin complexes were designed, synthesized, and characterized. Owing to the strong donor strength of axial NHC ligands in stabilizing the trans M?CRR′/M?NR moiety, these complexes showed unprecedently high catalytic activity towards alkene cyclopropanation, carbene C? H, N? H, S? H, and O? H insertion, alkene aziridination, and nitrene C? H insertion with turnover frequencies up to 1950 min^?1. The use of chiral [Ru(D₄‐Por)(BIMe)₂] ( 1 g ) as a catalyst led to highly enantioselective carbene/nitrene transfer and insertion reactions with up to 98 % ee. Carbene modification of the N terminus of peptides at 37 °C was possible. DFT calculations revealed that the trans axial NHC ligand facilitates the decomposition of diazo compounds by stabilizing the metal–carbene reaction intermediate.     

Copper and Silver Carbene Complexes without Heteroatom‐Stabilization: Structure,Spectroscopy, and Relativistic Effects

Salts of a copper and a silver carbene complex were prepared from dimesityl diazomethane, made possible by the steric shielding of the N‐heterocyclic carbene (NHC) ancillary ligand IPr**. The mint‐green complex [IPr**Ag=CMes₂]⁺[NTf₂]^? is the first isolated silver carbene complex without heteroatom donor substituents. Single‐crystal X‐ray diffraction provides evidence for a predominant carbenoid character, and supports the postulation of such reactive species as intermediates in silver‐catalyzed C? H activation reactions. The greenish yellow copper carbene complex [IPr**Cu=CMes₂]⁺[NTf₂]^? has spectroscopic properties in between the isostructural silver complex and the already reported emerald green gold carbene complex. A comparison in the Group 11 series indicates that relativistic effects are responsible for the strong σ bond and the significant π back‐bonding in the gold carbene moiety.     

σ-Silane Platinum(II) Complexes as Intermediates in C−Si Bond-Coupling Processes

Platinum complexes [Pt(NHC′)(NHC)][BAr^F] (in which NHC′ denotes a cyclometalated N-heterocyclic carbene ligand, NHC) react with primary silanes RSiH₃ to afford the cyclometalated platinum(II) silyl complexes [Pt(NHC-SiHR′)(NHC)][BAr^F] through a process that involves the formation of C−Si and Pt−Si bonds with concomitant extrusion of H₂. Low-temperature NMR studies indicate that the process proceeds through initial formation of the σ-SiH complexes [Pt(NHC′)(NHC)(HSiH₂R)][BAr^F], which are stable at temperatures below −10 °C. At higher temperatures, activation of one Si−H bond followed by a C−Si coupling reaction generates an agostic SiH platinum hydride derivative [Pt(H)(NHC′-SiH₂R)(NHC)][BAr^F], which undergoes a second Si−H bond activation to afford the final products. Computational modeling of the reaction mechanism indicates that the stereochemistry of the silyl/hydride ligands after the first Si−H bond cleavage dictates the nature of the products, favoring the formation of a C−Si bond over a C−H bond, in contrast to previous results obtained for tertiary silanes. Furthermore, the process involves a trans-to-cis isomerization of the NHC ligand before the second Si−H bond cleavage.     

Asymmetric [2,3]‐Wittig Rearrangement of Oxygenated Allyl Benzyl Ethers in the Presence of a Chiral di‐tBu‐bis(oxazoline) Ligand: A Novel Synthetic Approach to THF Lignans

We have accomplished highly enantioselective [2,3]‐Wittig rearrangements of functionalized allyl benzyl ethers in the presence of a chiral di‐tBu‐bis(oxazoline) ligand. In various oxygenated benzylic ethers, the reactions proceeded with excellent diastereo‐ and enantioselectivities, although the presence of a methoxy substituent at the ortho‐position on the benzyl group drastically decreased the enantioselectivity. Conversely, o‐ethyl and o‐phenyl substituents had no significant effect on the selectivity. We found that the C2‐substituent of the allylic moiety played an important role in producing high enantioselectivity. Highly enantioselective [2,3]‐Wittig rearrangement in the presence of catalytic amounts of the chiral ligands is also described.     

Deactivation of Ru-benzylidene Grubbs catalysts active in olefin metathesis

In this work, we explore the reactivity induced by coordination of a CO molecule trans to the Ru-benzylidene bond of a prototype Ru-olefin metathesis catalyst bearing a N-heterocyclic carbene (NHC) ligand. DFT calculations indicate that CO binding to the Ru center promotes a cascade of reactions with very low-energy barriers that lead to the final crystallographically characterized product, in which the original benzylidene group has attacked the proximal aromatic ring of the ligand leading to a cycloheptatriene ring through a Buchner ring expansion. In conclusion, the overall mechanism is best described as a carbene insertion into a C–C bond of the aromatic N-substituent of the NHC ligand, forming a cyclopropane ring. This cyclopropanation step is followed by a Buchner ring expansion reaction, leading to the experimentally observed product presenting a cycloheptatriene ring.     

Nitridorhenium(V) Complexes with 1,3,4‐Triphenyl‐1,2,4‐triazol‐5‐ylidene

[ReNCl₂(PPh₃)₂] and [ReNCl₂(PMe₂Ph)₃] react with the N‐heterocyclic carbene (NHC) 1,3,4‐triphenyl‐1,2,4‐triazol‐5‐ylidene (HL^Ph) under formation of the stable rhenium(V) nitrido complex [ReNCl(HL^Ph)(L^Ph)], which contains one of the two NHC ligands with an additional orthometallation. The rhenium atom in the product is five‐coordinate with a distorted square‐pyramidal coordination sphere. The position trans to the nitrido ligand is blocked by one phenyl ring of the monodentate HL^Ph ligand. The Re–C(carbene) bond lengths of 2.072(6) and 2.074(6) Å are comparably long and indicate mainly σ‐bonding between the NHC ligand and the electron deficient d² metal atom. The chloro ligand in [ReNCl(HL^Ph)(L^Ph)] is labile and can be replaced by ligands such as pseudohalides or monoanionic thiolates such as diphenyldithiophosphinate (Ph₂PS₂^?) or pyridine‐2‐thiolate (pyS^?). X‐ray structure analyses of [ReN(CN)(HL^Ph)(L^Ph)] and [ReN(pyS)(HL^Ph)(L^Ph)] show that the bonding situation of the NHC ligands (Re–C(carbene) distances between 2.086(3) and 2.130(3) Å) in the product is not significantly influenced by the ligand exchange. The potentially bidentate pyS^? ligand is solely coordinated via its thiolato functionality. Hydrogen atoms of each one of the phenyl rings come close to the unoccupied sixth coordination positions of the rhenium atoms in the solid state structures of all complexes. Re–H distances between 2.620 and 2.712Å do not allow to discuss bonding, but with respect to the strong trans labilising influence of “N^3?”, weak interactions are indicated.     

An NHC–Silyl–NHC Pincer Ligand for the Oxidative Addition of C−H,N−H,and O−H Bonds to Cobalt(I) Complexes

N‐Heterocyclic carbene based pincer ligands bearing a central silyl donor, [CSiC]⁻, have been envisioned as a class of strongly σ‐donating ligands that can be used for synthesizing electron‐rich transition‐metal complexes for the activation of inert bonds. However, this type of pincer ligand and complexes thereof have remained elusive owing to their challenging synthesis. We herein describe the first synthesis of a CSiC pincer ligand scaffold through the coupling of a silyl–NHC chelate with a benzyl–NHC chelate induced by one‐electron oxidation in the coordination sphere of a cobalt complex. The monoanionic CSiC ligand stabilizes the Co^I dinitrogen complex [(CSiC)Co(N₂)] with an unusual coordination geometry and enables the challenging oxidative addition of E−H bonds (E=C, N, O) to Co^I to form Co^III complexes. The structure and reactivity of the cobalt(I) complex are ascribed to the unique electronic properties of the CSiC pincer ligand, which provides a strong trans effect and pronounced σ‐donation.     

Alcohol‐Induced C−N Bond Cleavage of Cyclometalated N‐Heterocyclic Carbene Ligands with a Methylene‐Linked Pendant Imidazolium Ring

Reaction of the pentamethylcyclopentadienyl rhodium iodide dimer [Cp*RhI₂]₂ with 1,1′‐diphenyl‐3,3′‐methylenediimidazolium diiodide in non‐alcohol solvents, in the presence of base, led to the formation of bis‐carbene complex [Cp*Rh(bis‐NHC)I]I (bis‐NHC=1,1′‐diphenyl‐4,4′‐methylenediimidazoline‐5,5′‐diylidene). In contrast, when employing alcohols as the solvent in the same reaction, cleavage of a methylene C?N bond is observed, affording ether‐functionalized (cyclometalated) carbene ligands coordinated to the metal center and the concomitant formation of complexes with a coordinated imidazole ligand. Studies employing other 1,1′‐diimidazolium salts indicate that the cyclometalation step is a prerequisite for the activation/scission of the C?N bond and, based on additional experimental data, a S_N2 mechanism for the reaction is tentatively proposed.     

An NHC–Silyl–NHC Pincer Ligand for the Oxidative Addition of C−H,N−H,and O−H Bonds to Cobalt(I) Complexes

N‐Heterocyclic carbene based pincer ligands bearing a central silyl donor, [CSiC]⁻, have been envisioned as a class of strongly σ‐donating ligands that can be used for synthesizing electron‐rich transition‐metal complexes for the activation of inert bonds. However, this type of pincer ligand and complexes thereof have remained elusive owing to their challenging synthesis. We herein describe the first synthesis of a CSiC pincer ligand scaffold through the coupling of a silyl–NHC chelate with a benzyl–NHC chelate induced by one‐electron oxidation in the coordination sphere of a cobalt complex. The monoanionic CSiC ligand stabilizes the Co^I dinitrogen complex [(CSiC)Co(N₂)] with an unusual coordination geometry and enables the challenging oxidative addition of E−H bonds (E=C, N, O) to Co^I to form Co^III complexes. The structure and reactivity of the cobalt(I) complex are ascribed to the unique electronic properties of the CSiC pincer ligand, which provides a strong trans effect and pronounced σ‐donation.     

Photofunctional Platinum Complexes Featuring N‐heterocyclic Carbene‐Based Pincer Ligands

Photoactive platinum complexes of stoichiometry [Pt(^RCCC^R)L]^0/+ (R=Me, nBu and L=? CN, ? C≡CPh, ? N≡CCH₃, ? Py, ? CO) featuring pincer‐type bis N‐heterocyclic carbene (NHC) ligands (^RCCC^R) were synthesized. Organometallic syntheses of these complexes are facile and achievable through standard laboratory procedures. Control of intermolecular Pt???Pt interaction, π–π stacking, and emission tuning is achieved through suitable choice of the NHC‐wingtip substituent (R) and the auxiliary ligand (L). Exposure to specific volatile organic compounds (VOCs) or mechanical grinding triggers changes in emission colors, which render these complexes photofunctional. Solid‐state structures and photoluminescence results are described herein.     

Dimers of N‐Heterocyclic Carbene Copper,Silver, and Gold Halides: Probing Metallophilic Interactions through Electron Density Based Concepts

Homobimetallic metallophilic interactions between copper, silver, and gold‐based [(NHC)MX]‐type complexes (NHC=N‐heterocyclic carbene, i.e, 1,3,4‐trimethyl‐4,5‐dihydro‐1H‐1,2,4‐triazol‐5‐ylidene; X=F, Cl, Br, I) were investigated by means of ab initio interaction energies, Ziegler–Rauk‐type energy‐decomposition analysis, the natural orbital for chemical valence (NOCV) framework, and the noncovalent interaction (NCI) index. It was found that the dimers of these complexes predominantly adopt a head‐to‐tail arrangement with typical M ??? M distance of 3.04–3.64 Å, in good agreement with the experimental X‐ray structure determined for [{(NHC)AuCl}₂], which has an Au ??? Au distance of 3.33 Å. The interaction energies between silver‐ and gold‐based monomers are calculated to be about ?25 kcal mol^?1, whereas that for the Cu congener is significantly lower (?19.7 kcal mol^?1). With the inclusion of thermal and solvent contributions, both of which are destabilizing, by about 15 and 8 kcal mol^?1, respectively, an equilibrium process is predicted for the formation of dimer complexes. Energy‐decomposition analysis revealed a dominant electrostatic contribution to the interaction energy, besides significantly stabilizing dispersion and orbital interactions. This electrostatic contribution is rationalized by NHC(δ⁺) ??? halogen(δ^?) interactions between monomers, as demonstrated by electrostatic potentials and derived charges. The dominant NOCV orbital indicates weakening of the π backdonation in the monomers on dimer formation, whereas the second most dominant NOCV represents an electron‐density deformation according to the formation of a very weak M ??? M bond. One of the characteristic signals found in the reduced density gradient versus electron density diagram corresponds to the noncovalent interactions between the metal centers of the monomers in the NCI plots, which is the manifestation of metallophilic interaction.     

An Original L‐shape,Tunable N‐Heterocyclic Carbene Platform for Efficient Gold(I) Catalysis

The synthesis and characterization of original NHC ligands based on an imidazo[1,5‐a]pyridin‐3‐ylidene (IPy) scaffold functionalized with a flanking barbituric heterocycle is described as well as their use as tunable ligands for efficient gold‐catalyzed C?N, C?O, and C?C bond formations. High activity, regio‐, chemo‐, and stereoselectivities are obtained for hydroelementation and domino processes, underlining the excellent performance (TONs and TOFs) of these IPy‐based ligands in gold catalysis. The gold‐catalyzed domino reactions of 1,6‐enynes give rise to functionalized heterocycles in excellent isolated yields under mild conditions. The efficiency of the NHC gold 5^Me complex is remarkable and mostly arises from a combination of steric protection and stabilization of the cationic Au^I active species by ligand 1^Me .     

1,2,4‐Triazol‐3‐ylidenes with an N‐2,4‐Dinitrophenyl Substituent as Strongly π‐Accepting N‐Heterocyclic Carbenes

The synthesis and characterisation of a series of new Rh and Au complexes bearing 1,2,4‐triazol‐3‐ylidenes with a N‐2,4‐dinitrophenyl (N‐DNP) substituent are described. IR, NMR, single‐crystal X‐ray diffraction and computational analyses of the Rh complexes revealed that the N‐heterocyclic carbenes (NHCs) behaved as strong π acceptors and weak σ donors. In particular, a natural bond orbital (NBO) analysis revealed that the contributions of the Rh→C_carbene π backbonding interaction energies (ΔE_bb) to the bond dissociation energies (BDE) of the Rh? C_carbene bond for [RhCl(NHC)(cod)] (cod=1,5‐cyclooctadiene) reached up to 63 %. The Au complex exhibited superior catalytic activity in the intermolecular hydroalkoxylation of cyclohexene with 2‐methoxyethanol. The NBO analysis suggested that the high catalytic activity of the Au^I complex resulted from the enhanced π acidity of the Au atom.     

[Ni(NHC)2] as a Scaffold for Structurally Characterized trans [H−Ni−PR2] and trans [R2P−Ni−PR2] Complexes

The addition of PPh₂H, PPhMeH, PPhH₂, P(para-Tol)H₂, PMesH₂ and PH₃ to the two-coordinate Ni⁰ N-heterocyclic carbene species [Ni(NHC)₂] (NHC=IiPr₂, IMe₄, IEt₂Me₂) affords a series of mononuclear, terminal phosphido nickel complexes. Structural characterisation of nine of these compounds shows that they have unusual trans [H−Ni−PR₂] or novel trans [R₂P−Ni−PR₂] geometries. The bis-phosphido complexes are more accessible when smaller NHCs (IMe₄>IEt₂Me₂>IiPr₂) and phosphines are employed. P−P activation of the diphosphines R₂P−PR₂ (R₂=Ph₂, PhMe) provides an alternative route to some of the [Ni(NHC)₂(PR₂)₂] complexes. DFT calculations capture these trends with P−H bond activation proceeding from unconventional phosphine adducts in which the H substituent bridges the Ni−P bond. P−P bond activation from [Ni(NHC)₂(Ph₂P−PPh₂)] adducts proceeds with computed barriers below 10 kcal mol⁻¹. The ability of the [Ni(NHC)₂] moiety to afford isolable terminal phosphido products reflects the stability of the Ni−NHC bond that prevents ligand dissociation and onward reaction.     

An Original L‐shape,Tunable N‐Heterocyclic Carbene Platform for Efficient Gold(I) Catalysis

The synthesis and characterization of original NHC ligands based on an imidazo[1,5‐a]pyridin‐3‐ylidene (IPy) scaffold functionalized with a flanking barbituric heterocycle is described as well as their use as tunable ligands for efficient gold‐catalyzed C?N, C?O, and C?C bond formations. High activity, regio‐, chemo‐, and stereoselectivities are obtained for hydroelementation and domino processes, underlining the excellent performance (TONs and TOFs) of these IPy‐based ligands in gold catalysis. The gold‐catalyzed domino reactions of 1,6‐enynes give rise to functionalized heterocycles in excellent isolated yields under mild conditions. The efficiency of the NHC gold 5^Me complex is remarkable and mostly arises from a combination of steric protection and stabilization of the cationic Au^I active species by ligand 1^Me .     

Phenylimidorhenium(V) Complexes with 1,3‐Diethyl‐4,5‐dimethylimidazole‐2‐ ylidene Ligands

The phenylimidorhenium(V) complexes [Re(NPh)X₃(PPh₃)₂] (X = Cl, Br) react with the N‐heterocyclic carbene (NHC) 1,3‐diethyl‐4,5‐dimethylimidazole‐2‐ylidene (L^Et) under formation of the stable rhenium(V) complex cations [Re(NPh)X(L^Et)₄]²⁺ (X = Cl, Br), which can be isolated as their chloride or [PF₆]^? salts. The compounds are remarkably stable against air, moisture and ligand exchange. The hydroxo species [Re(NPh)(OH)(L^Et)₄]²⁺ is formed when moist solvents are used during the synthesis. The rhenium atoms in all three complexes are coordinated in a distorted octahedral fashion with the four NHC ligands in equatorial planes of the molecules. The Re–C(carbene) bond lengths between 2.171(8) and 2.221(3) Å indicate mainly σ‐bonding between the NHC ligand and the electron deficient d² metal atoms. Attempts to prepare analogous phenylimido complexes from [Re(NPh)Cl₃(PPh₃)₂] and 1,3‐diisopropyl‐4,5‐dimethylimidazole‐2‐ylidene (L^i?Pr) led to a cleavage of the rhenium‐nitrogen multiple bond and the formation of the dioxo complex [ReO₂(L^i?Pr)₄]⁺.     

The first example of a two‐coordinated AuI atom bonded to an FeII atom and an N‐heterocyclic carbene (NHC) ligand

The aurophilicity exhibited by Au^I complexes depends strongly on the nature of the supporting ligands present and the length of the Au–element (Au—E) bond may be used as a measure of the donor–acceptor properties of the coordinated ligands. A binuclear iron–gold complex, [1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene‐2κC²]dicarbonyl‐1κ²C‐(1η⁵‐cyclopentadienyl)gold(I)iron(II)(Au—Fe) benzene trisolvate, [AuFe(C₅H₅)(C₂₇H₃₆N₂)(CO)₂]·3C₆H₆, was prepared by reaction of K[CpFe(CO)₂] (Cp is cyclopentadienyl) with (NHC)AuCl [NHC = 1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene]. In addition to the binuclear complex, the asymmetric unit contains three benzene solvent molecules. This is the first example of a two‐coordinated Au atom bonded to an Fe and a C atom of an N‐heterocyclic carbene.