Constructing High‐Generation Sierpiński Triangles by Molecular Puzzling

Three generations of metalated trigonal supramolecular architectures, so‐called metallo‐triangles, were assembled from terpyridine (tpy) complexes. The first generation (G1) metallo‐triangles were directly obtained by reacting a bis(terpyridinyl) ligand with a 60° bite angle and Zn^II ions. The direct self‐assembly of G2 and G3 triangles by mixing organic ligands and Zn^II, however, only generated a mixture of G1 and G2, as well as a trace amount of insoluble polymer‐like precipitate. Therefore, a modular strategy based on the connectivity of ⟨tpy−Ru²⁺−tpy⟩ was employed to construct two metallo‐organic ligands for the assembly of G2 and G3 Sierpiński triangles. The metallo‐organic ligands L^A and L^B with multiple free terpyridines were obtained through Suzuki cross‐coupling of the Ru^II complexes, and then assembled with Zn^II or Cd^II to obtain high‐generation metallo‐triangular architectures in nearly quantitative yield. The G1–G3 architectures were characterized by NOESY and DOSY NMR spectroscopy, ESI‐MS, TWIM‐MS, and transmission electron microscopy.     

The transformation from 2°‐amine to 3°‐amine of cyclam ring alters the fragmentation patterns of 1‐tosylcytosine‐cyclam conjugates

The novel N‐1‐sulfonylcytosine‐cyclam conjugates 1 and 2 conjugates are ionized by electrospray ionization mass spectrometry (ESI MS) in positive and negative modes (ES⁺ and ES⁻) as singly protonated/deprotonated species or as singly or doubly charged metal complexes. Their structure and fragmentation behavior is examined by collision induced experiments. It was observed that the structure of the conjugate dictated the mode of the ionization: 1 was analyzed in ES⁻ mode while 2 in positive mode. Complexation with metal ions did not have the influence on the ionization mode. Zn²⁺ and Cu²⁺ complexes with ligand 1 followed the similar fragmentation pattern in negative ionization mode. The transformation from 2°‐amine in 1 to 3°‐amine of cyclam ring in 2 leads to the different fragmentation patterns due to the modification of the protonation priority which changed the fragmentation channels within the conjugate itself. Cu²⁺ ions formed complexes practically immediately, and the priority had the cyclam portion of the ligand 2 . The structure of the formed Zn²⁺ complexes with ligand 2 depended on the number of 3° amines within the cyclam portion of the conjugate and the ratio of the metal:ligand used. The cleavage of the cyclam ring of metal complexes is driven by the formation of the fragment that suited the coordinating demand of the metal ions and the collision energy applied. Finally, it was shown that the structure of the cyclam conjugate dictates the fragmentation reactions and not the metal ions.     

Synthesis,crystal structure and photoluminescence of a three‐dimensional zinc coordination compound with NBO‐type topology

The assembly of metal–organic frameworks (MOFs) with metal ions and organic ligands is currently attracting considerable attention in crystal engineering and materials science due to their intriguing architectures and potential applications. A new three‐dimensional MOF, namely poly[[diaqua(μ₈‐para‐terphenyl‐3,3′,5,5′‐tetracarboxylato)dizinc(II)] dimethylformamide disolvate monohydrate], {[Zn₂(C₂₂H₁₀O₈)(H₂O)₂]·2C₃H₇NO·H₂O}_n, was synthesized by the self‐assembly of Zn(NO₃)₂·6H₂O and para‐terphenyl‐3,3′,5,5′‐tetracarboxylic acid (H₄TPTC) under solvothermal conditions. The compound was structurally characterized by FT–IR spectroscopy, elemental analysis and single‐crystal X‐ray diffraction analysis. Each Zn^II ion is located in a square‐pyramidal geometry and is coordinated by four carboxylate O atoms from four different TPTC^4? ligands. Pairs of adjacent equivalent Zn^II ions are bridged by four carboxylate groups, forming [Zn₂(O₂CR)₄] (R = terphenyl) paddle‐wheel units. One aqua ligand binds to each Zn^II centre along the paddle‐wheel axis. Each [Zn₂(O₂CR)₄] paddle wheel is further linked to four terphenyl connectors to give a three‐dimensional framework with NBO‐type topology. The thermal stability and solid‐state photoluminescence properties of the title compound have also been investigated.     

Reversible Self‐Assembly of Carboxylated Peptide‐Functionalized Gold Nanoparticles Driven by Metal‐Ion Coordination

Carboxylated peptide‐functionalized gold nanoparticles (peptide‐GNPs) self‐assemble into two‐ and three‐dimensional nanostructures in the presence of various heavy metal ions (i.e. Pb²⁺, Cd²⁺, Cu²⁺, and Zn²⁺) in aqueous solution. The assembly process is monitored by following the changes in the surface plasmon resonance (SPR) band of gold nanoparticles in a UV/Vis spectrophotometer, which shows the development of a new SPR band in the higher‐wavelength region. The extent of assembly is dependent on the amount of metal ions present in the medium and also the time of assembly. TEM analysis clearly shows formation of two‐ and three‐dimensional nanostructures. The assembly process is completely reversible by addition of alkaline ethylenediaminetetraacetic acid (EDTA) solution. The driving force for the assembly of peptide‐GNPs is mainly metal ion/carboxylate coordination. The color and spectral changes due to this assembly can be used for detection of these heavy‐metal ions in solution.     

Temperature‐induced self‐assembly and metal‐ion stabilization of histidine functional block copolymers

Histidine functional block copolymers are thermally self‐assembled into polymer micelles with poly‐N‐isopropylacrylamide in the core and the histidine functionality in the corona. The thermally induced self‐assemblies are reversible until treated with Cu²⁺ ions at 50 °C. Upon treatment with 0.5 equivalents of Cu²⁺ relative to the histidine moieties, metal‐ion coordination locks the self‐assemblies. The self‐assembly behavior of histidine functional block copolymers is explored at different values of pH using DLS and ¹H NMR. Metal‐ion coordination locking of the histidine functional micelles is also explored at different pH values, with stable micelles forming at pH 9, observed by DLS and imaged by atomic force microscopy. The thermal self‐assembly of glycine functional block copolymers at pH 5, 7, and 9 is similar to the histidine functional materials; however, the self‐assemblies do not become stable after the addition of Cu²⁺, indicating that the imidazole plays a crucial role in metal‐ion coordination that locks the micelles. The reversibility of the histidine‐copper complex locking mechanism is demonstrated by the addition of acid to protonate the imidazole and destabilize the polymer self‐assemblies. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1964–1973     

Carbonic Anhydrase‐Mimetic Bolaamphiphile Self‐Assembly for CO2 Hydration and Sequestration

A biomimetic catalyst was prepared through the self‐assembly of a bolaamphiphilic molecule with histidine moieties for the sequestration of carbon dioxide. The histidyl bolaamphiphilic molecule bis(N‐α‐amidohistidine)‐1,7‐heptane dicarboxylate has been synthesized and self‐assembled to produce analogues of the active sites of carbonic anhydrase (CA) after association with Zn²⁺ ions. Spectroscopic analysis demonstrated the coordination of the Zn²⁺ ions with histidine imidazole moieties, which is the core conformation of CA active sites. The Zn‐associated self‐assembly worked as a CA‐mimetic catalyst that shows catalytic activity for CO₂ hydration. Evaluation of the kinetics of using para‐nitrophenylacetate revealed that the kinetic parameters of the CA‐mimetic catalyst were maximized at the optimal Zn concentration and that excess Zn ions resulted in deteriorated catalytic activity. The performance of the CA‐mimetic catalyst was enhanced by changing the pH value and temperature of the reaction, which implies that the hydrolysis of the substrate is the rate‐determining step. The catalyst‐assisted sequestration of CO₂ was demonstrated by CaCO₃ precipitation upon the addition of Ca²⁺ ions. This study offers an easy way to prepare enzyme analogues for CO₂ sequestration through the self‐assembly of bolaamphiphile molecules with designer biochemical moieties.     

Facile Self‐Assembly of Metallo‐Supramolecular Ring‐in‐Ring and Spiderweb Structures Using Multivalent Terpyridine Ligands

A series of metallo‐supramolecular ring‐in‐ring structures was generated by assembling Cd^II ions and the multivalent terpyridine ligands ( L^1‐3 ) composed of one 60°‐bent and two 120°‐bent bis(terpyridine)s with varying alkyl linker lengths. The mechanistic study for the self‐assembly process excluded an entropically templated pathway and showed that the intramolecularly complexed species is the key intermediate leading to ring‐in‐ring formation. The next‐generation superstructure, a spiderweb, was produced in quantitative yield using the elongated decakis(terpyridine) ligand ( L⁵ ).     

Metal‐Mediated Self‐Assembly of a β‐Sandwich Protein

The β‐sandwich cupredoxin Plastocyanin (Pc) was found to self‐assemble in the presence of Zn²⁺, a known mediator of protein–protein interfaces. Diffraction‐quality crystals of Pc grew from solutions containing zinc acetate as the sole precipitant. Di‐ and trinuclear zinc sites contribute to the crystal contacts in this structure. A different crystal form, also involving numerous zinc bridging ions, was obtained in the presence of poly(ethylene glycol) 8 000. Comparison of the two crystal forms reveals the effect of macromolecular crowding on self‐assembly. Solution‐state structural characterisation of the Zn²⁺‐mediated Pc oligomers was performed by using a combination of chemical shift perturbation mapping and small‐angle X‐ray scattering. The data indicate the formation of dimers in solution. The implications for metal‐mediated assembly and crystallisation are discussed.     

Viologen‐Templated Arrays of Cucurbit[7]uril‐Modified Iron‐Oxide Nanoparticles

Magnetic and fluorescent assemblies of iron‐oxide nanoparticles (NPs) were constructed by threading a viologen‐based ditopic ligand, DPV²⁺, into the cavity of cucurbituril (CB[7]) macrocycles adsorbed on the surface of the NPs. Evidence for the formation of 1:2 inclusion complexes that involve DPV²⁺ and two CB[7] macrocycles was first obtained in solution by ¹H NMR and emission spectroscopy. DPV²⁺ was found to induce self‐assembly of nanoparticle arrays (DPV²⁺?CB[7]NPs) by bridging CB[7] molecules on different NPs. The resulting viologen‐crosslinked iron‐oxide nanoparticles exhibited increased saturation magnetization and emission properties. This facile supramolecular approach to NP self‐assembly provides a platform for the synthesis of smart and innovative materials that can achieve a high degree of functionality and complexity and that are needed for a wide range of applications.     

ESI‐MS studies of the non‐covalent interactions between biologically important metal ions and N‐sulfonylcytosine derivatives

The aim of this report is to present the electrospray ionization mass spectrometry results of the non‐covalent interaction of two biologically active ligands, N‐1 ‐ (p‐toluenesulfonyl)cytosine, 1‐TsC, 1 and N‐1 ‐ methanesulfonylcytosine, 1‐MsC, 2 and their Cu(II) complexes Cu(1‐TsC‐N3)₂Cl₂, 3 and Cu(1‐MsC‐N3)₂Cl₂ and 4 with biologically important cations: Na⁺, K⁺, Ca²⁺, Mg²⁺ and Zn²⁺. The formation of various complex metal ions was observed. The alkali metals Na⁺ and K⁺ formed clusters because of electrostatic interactions. Ca²⁺ and Mg²⁺ salts produced the tris ligand and mixed ligand complexes. The interaction of Zn²⁺ with 1–4 produced monometal and dimetal Zn²⁺ complexes as a result of the affinity of Zn²⁺ ions toward both O and N atoms. Copyright © 2016 John Wiley & Sons, Ltd.     

Solvent‐Dependent Self‐Assembly Behaviour and Speciation Control of Pd6L8 Metallo‐supramolecular Cages

The C₃‐symmetric chiral propylated host‐type ligands (±)‐tris(isonicotinoyl)‐tris(propyl)‐cyclotricatechylene ( L1 ) and (±)‐tris(4‐pyridyl‐4‐benzoxy)‐tris(propyl)‐cyclotricatechylene ( L2 ) self‐assemble with Pd^II into [Pd₆L₈]¹²⁺ metallo‐cages that resemble a stella octangula. The self‐assembly of the [Pd₆( L1 )₈]¹²⁺ cage is solvent‐dependent; broad NMR resonances and a disordered crystal structure indicate no chiral self‐sorting of the ligand enantiomers in DMSO solution, but sharp NMR resonances occur in MeCN or MeNO₂. The [Pd₆( L1 )₈]¹²⁺ cage is observed to be less favourable in the presence of additional ligand, than is its counterpart, where L=(±)‐tris(isonicotinoyl)cyclotriguaiacylene ( L1 a ). The stoichiometry of reactant mixtures and chemical triggers can be used to control formation of mixtures of homoleptic or heteroleptic [Pd₆L₈]¹²⁺ metallo‐cages where L= L1 and L1 a .     

Towards Molecular Construction Platforms: Synthesis of a Metallotricyclic Spirane Based on Bis(2,2′:6′,2“‐Terpyridine)RuII Connectivity

The design and construction of the first multicomponent stepwise assembly of a <tpy‐Ru^II‐tpy>‐based (tpy=terpyridine), three‐dimensional, propeller‐shaped trismacrocycle, 8 , are reported. Key steps in the synthesis involve the preparation of a hexaterpyridinyl triptycene and its reaction with dimeric, 60°‐directional, bisterpyridine‐Ru^II building blocks. Characterization includes ESI‐ and ESI‐TWIM‐MS and TEM, along with 1D and 2D ¹H NMR spectroscopy.     

Five Coordinated Zinc(II) and Tris‐Chelate Cadmium(II) Complexes with 2,2′‐Diamino‐5,5′‐dimethyl‐4,4′‐bithiazole – Syntheses,Spectroscopic Characterization,and Crystal Structure

The new synthesized ligand (DADMBTZ = 2,2′‐diamino‐5,5′‐dimethyl‐4,4′‐bithiazole), which is mentioned in this text, is used for preparing the two new complexes [Zn(DADMBTZ)₃](ClO₄)₂. 0.8MeOH.0.2H₂O ( 1 ) and [Cd(DADMBTZ)₃](ClO₄)₂ ( 2 ). The characterization was done by IR, ¹H, ¹³C NMR spectroscopy, elemental analysis and single crystal X‐ray determination. In reaction with DADMBTZ, zinc(II) and cadmium(II) show different characterization. In 2 , to form a tris‐chelate complex with nearly C₃ symmetry for coordination polyhedron, DADMBTZ acts as a bidentate ligand. In 1 , this difference maybe relevant to small radii of Zn²⁺ which make one of the DADMBTZ ligands act as a monodentate ligand to form the five coordinated Zn²⁺ complex. In both 1 and 2 complexes the anions are symmetrically different. 1 and 2 complexes form 2‐D and 3‐D networks via N‐H···O and N‐H···N hydrogen bonds, respectively.     

Syntheses,Structures and Spectral Properties of Mononuclear CuII and Dimeric ZnII Complexes Based on an Asymmetric Salamo‐type N2O2 Ligand

The asymmetric Salamo‐type N₂O₂ ligand H₂L and its corresponding Cu^II and Zn^II complexes [CuL] and [{ZnL}₂]·2CH₃CN were synthesized and structurally characterized. Crystallographic data of the Cu^II complex revealed that the Cu^II ion is tetracoordinate with a slightly distorted square planar arrangement forming a 2D supramolecular plane structure by hydrogen bonding and π···π stacking interactions. In the Zn^II complex, the Zn^II ions are pentacoordinate in N₂O₂ tetradentate fashion and intermolecular contacts between Zn^II and oxygen atoms result in a head‐to‐tail dimer. The Zn^II ions were found to have slightly distorted square pyramidal and trigonal bipyramidal arrangements, respectively. Hydrogen bonding interactions stabilized the Zn^II complex to facilitate self‐assembly to a 1D linear chain. The Cu^II and Zn^II complexes show intense photoluminescence with maximum emissions at approx. 426 and 411 nm upon excitation at 360 and 350 nm, respectively.     

Terminal Redox‐Site Effect on the Long‐Range Electron Conduction of Fe(tpy)2 Oligomer Wires on a Gold Electrode

This article completes our comprehensive understanding of the electron transport properties of our original π‐conjugated redox‐active molecular wires comprising Fe bridged by p‐phenylene linkers (tpy=2,2′:6′,2′′‐terpyridine). The Fe(tpy)₂ oligomer wires comprise three types of tpy ligands: the anchor tpy ligand ( A series) makes a junction between the wire and electrode, the bridging bis‐tpy ligand ( L series) connects the Fe(tpy)₂ units, and the terminal tpy ligand ( T series) possesses a redox site as a probe for the long‐range electron transport ability. Taking advantage of the precise tunability of the composition of the Fe(tpy)₂ oligomer wires, thus far we investigated how A and L impacted on the electron‐transport ability. The excellent long‐range electron transport ability with ultrasmall attenuation constants (β^d, 0.002 Å^?1 as the minimum) depends on L significantly [Chem. Asian J. 2009 , 4, 1361], whereas A is unrelated to the β^d value, but influences the zero‐distance electron‐transfer rate constant, k_et⁰ [J. Am. Chem. Soc. 2010 , 132, 4524]. Herein we study the influence of terminal ligand T ^x (x=1–3). β^d is independent of T , however, T³ , with a cyclometallated Ru complex as the redox site, gives rise to a k_et⁰ value greater than T¹ and T² with ferrocene. This series of simple but definitive conclusions indicates that we have reached the stage of being able to precisely design molecular wires to attain desirable single‐molecule electron conduction.     

A Smart Sensing Method for Object Identification Using Circularly Polarized Luminescence from Coordination‐Driven Self‐Assembly

The potential use of circularly polarized luminescence for object identification in a sensor application is demonstrated. New luminescence probes using pyrene derivatives as sensor luminophores were developed. (R,R)‐Im₂Py and (S,S)‐Im₂Py contain two chiral imidazole moieties at 1,6‐positions through ethynyl spacers (angle between spacers ca. 180°). The probe molecules spontaneously self‐assemble into chiral stacks (P or M helicity) upon coordination to metal ions with tetrahedral coordination (Zn²⁺). The chiral probes display neither circular dichroism (CD) nor circularly polarized luminescence (CPL) without metal ions. However, (R,R)‐Im₂Py and (S,S)‐Im₂Py exhibit intense chiroptical activity (CD and CPL) upon self‐assembly with Zn²⁺ ions. (R,R)‐Im₂Py and (S,S)‐Im₂Py with chemical stimuli‐responsibility allow sensing using the CPL signal as detection output, enabling us to discriminate between a signal from the target analyte and that from non‐target species.     

A self‐penetrated three‐dimensional zinc(II) coordination framework based on 4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoic acid and 1,3‐bis[(imidazol‐1‐yl)methyl]benzene ligands: synthesis,structure and properties

With the rapid development of metal–organic frameworks (MOFs), a variety of MOFs and their derivatives have been synthesized and reported in recent years. Commonly, multifunctional aromatic polycarboxylic acids and nitrogen‐containing ligands are employed to construct MOFs with fascinating structures. 4,4′,4′′‐(1,3,5‐Triazine‐2,4,6‐triyl)tribenzoic acid (H₃TATB) and the bidentate nitrogen‐containing ligand 1,3‐bis[(imidazol‐1‐yl)methyl]benzene (bib) were selected to prepare a novel Zn^II‐MOF under solvothermal conditions, namely poly[[tris{μ‐1,3‐bis[(imidazol‐1‐yl)methyl]benzene}bis[μ₃‐4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoato]trizinc(II)] dimethylformamide disolvate trihydrate], {[Zn₃(C₂₄H₁₂N₃O₆)₂(C₁₄H₁₄N₄)₃]·2C₃H₇NO·3H₂O}_n ( 1 ). The structure of 1 was characterized by single‐crystal X‐ray diffraction, IR spectroscopy and powder X‐ray diffraction. The properties of 1 were investigated by thermogravimetric and fluorescence analysis. Single‐crystal X‐ray diffraction shows that 1 belongs to the monoclinic space group Pc. The asymmetric unit contains three crystallographically independent Zn^II centres, two 4,4′,4′′‐(1,3,5‐triazine‐2,4,6‐triyl)tribenzoate (TATB^3?) anions, three complete bib ligands, one and a half free dimethylformamide molecules and three guest water molecules. Each Zn^II centre is four‐coordinated and displays a distorted tetrahedral coordination geometry. The Zn^II centres are connected by TATB^3? anions to form an angled ladder chain with large windows. Simultaneously, the bib ligands link Zn^II centres to give a helical Zn–bib–Zn chain. Furthermore, adjacent ladders are bridged by Zn–bib–Zn chains to form a fascinating three‐dimensional self‐penetrated framework with the short Schläfli symbol 6⁵·7·8¹³·9·10. In addition, the luminescence properties of 1 in the solid state and the fluorescence sensing of metal ions in suspension were studied. Significantly, compound 1 shows potential application as a fluorescent sensor with sensing properties for Zr⁴⁺ and Cu²⁺ ions.     

Self‐Assembly of Five 8‐Hydroxyquinolinate‐Based Complexes: Tunable Core,Supramolecular Structure,and Photoluminescence Properties

Five new Zn^II complexes, namely [Zn₃(L)₆] ( 1 ), [Zn₂(Cl)₂(L)₂(py)₂] ( 2 ), [Zn₂(Br)₂(L)₂(py)₂] ( 3 ), [Zn(L)₂(py)] ( 4 ), and [Zn₂(OAc)₂(L)₂(py)₂] ( 5 ), were prepared by the solvothermal reaction of ZnX₂ (X^?=Cl^?, Br^?, F^?, and OAc^?) salts with a 8‐hydroxyquinolinate ligand (HL) that contained a trifluorophenyl group. All of the complexes were characterized by elemental analysis, IR spectroscopy, and powder and single‐crystal X‐ray crystallography. The building blocks exhibited unprecedented structural diversification and their self‐assembly afforded one mononuclear, three binuclear, and one trinuclear Zn^II structures in response to different anions and solvent systems. Complexes 1 – 5 featured four types of supramolecular network controlled by non‐covalent interactions, such as π???π‐stacking, C? H???π, hydrogen‐bonding, and halogen‐related interactions. Investigation of their photoluminescence properties exhibited disparate emission wavelengths, lifetimes, and quantum yields in the solid state.     

Metal‐Ion Induced In Situ Ligand Oxidation for Self‐Assembled Clusters: from Bis(5‐(2‐pyridine‐2‐yl)‐1,2,4‐triazole‐3‐yl)methane to Alcohol or Ketone

Hydrothermal reactions of metal nitrates and ligand bis(5‐(pyridine‐2‐yl)‐1,2,4‐triazol‐3‐yl)methane (H₂L¹) gave three cluster compounds, {Cr₂}, {Zn₁₂} and {Fe₈}. Notably, methylene group of H₂L¹ was in situ oxidized either to hydroxymethylated (L²‐O)³⁻ in the metallo‐ring {Zn₁₂} or to a rigid carbonylated (L³=O)²⁻ in the screw‐type {Fe₈}. In light of comparative experimental results, NO₃⁻ was deduced to be of a catalytic role in the ligand oxidation. Metal ion could be regarded as an “induced” tool for clusters generation in self‐assembly process.     

Corrosion‐Mediated Self‐Assembly (CMSA): Direct Writing Towards Sculpturing of 3D Tunable Functional Nanostructures

Inexpensive and readily available metal foils have been extracted and sculptured into nanocomposites without the expense of applied energy. The unwanted corrosion phenomenon has been contrarily utilized to realize desirable 3D nanostructures through a corrosion‐mediated self‐assembly (CMSA) method, which is unattainable by conventional 2D patterning routes. By virtue of electrochemical dissolution/re‐deposition initiated by brass corrosion, ionic derivatives (Zn²⁺ and Cu²⁺) are continuously supplied and seized by etchant ions (PO₄^3?) to self‐assemble into well‐defined nanocomposites. Beyond 3D geometry patterning, CMSA enables arbitrarily tailoring of structures and chemical compositions with in situ multiphase amalgamation of hybrid materials, which improves homogeneity and thus mitigates phase separation issues. Importantly, the CMSA technique is demonstrated on transition metals for functional photocatalytic applications.