Hexaarylbutadiene: A Versatile Scaffold with Tunable Redox Properties towards Organic Near‐Infrared Electrochromic Material

When the 1,1,4,4‐tetraanilinobutadiene skeleton is attached with two halogenated aryl units at the 2,3‐positions, they undergo facile two‐electron oxidation to give stable dicationic dyes which exhibit a near‐infrared (NIR) absorption whereas the neutral dienes show only pale color. Therefore, a distinct electrochromic response with an absorption change in the NIR region is achieved, which is attracting considerable recent attention from the viewpoint of bioimaging. Herein, we demonstrate that the redox potentials of the 1,1,4,4‐tetraanilinobutadiene can be precisely controlled by the donating properties of the amino group on the aniline unit as well as the number of halogen atoms on the aryl units at 2,3‐positions on the butadiene. In contrast, the NIR absorption bands mainly depend on the number of halogen atoms irrespective to the donating properties of aniline unit. Thus, the hexaarylbutadiene skeleton is proven to be a versatile scaffold to develop less‐explored organic NIR electrochromic materials, whose redox and spectroscopic properties can be finely tuned by modifying/attaching the proper substituents.     

Formation and Geometrical Control of Polygon‐Like Metal‐Coordination Assemblies

Polygon‐like [2+2]‐ and [3+3]‐type metal complexes were prepared from dipyrrin dimers connected by acute‐angled spacers. The electrical conduction depends strongly on the packing alignment of the compounds, revealing the presence of effective hopping pathways for holes with relatively high mobility up to 0.11 cm² V^?1 s^?1 along the aligned axis of [3+3]‐type metal‐bridged assemblies. These observations correlated with the geometrical control of the π‐conjugated metal complexes in the cyclic structures, which enables their ordered arrangement in the assemblies.     

Reactivity of 2,2′‐Bis(2N‐(1,1′,3,3′‐tetramethyl‐guanidino))diphenylene‐amine with CuI and [Cu(MeCN)4][PF6]: Benzimidazole Formation vs. Cu Oxidation

The reaction of 2,2′‐Bis(2N‐(1,1′,3,3′‐tetramethyl‐guanidino))diphenylene‐amine (TMG₂PA) ( 1 ) with CuI in MeCN results in the formation of [Cu^II(TMG₂PA^amid)I] ( 2 ) indicatingthat Cu^I is the target of an oxidative attack of the N‐H proton of the ligand which itself is converted to molecular hydrogen. In contrast, if [Cu(MeCN)₄][PF₆] is used as the Cu^I source, [Cu^I₂(TMGbenz)₂][PF₆]₂ ( 3 ) is obtained instead. The use of the non‐coordinating counterion [PF₆]^– apparently prevents Cu^I from oxidation but induces itself a cyclisation reaction within the ligand which results in the formation of a benzimidazole‐guanidine ligand.     

Synthesis and Properties of Alkoxy‐ and Alkenyl‐Substituted Peralkylated Imidazolium Ionic Liquids

Novel peralkylated imidazolium ionic liquids bearing alkoxy and/or alkenyl side chains have been synthesized and studied. Different synthetic routes towards the imidazoles and the ionic liquids comprising bromide, iodide, methanesulfonate, bis(trifluoromethylsulfonyl)imide ([NTf₂]^?), and dicyanamide {[N(CN)₂]^?} as the anion were evaluated, and this led to a library of analogues, for which the melting points, viscosities, and electrochemical windows were determined. Incorporation of alkenyl moieties hindered solidification, except for cations with high symmetry. The alkoxy‐derivatized ionic liquids are often crystalline; however, room‐temperature ionic liquids (RTILs) were obtained with the weakly coordinating anions [NTf₂]^? and [N(CN)₂]^?. For the viscosities of the peralkylated RTILs, an opposite trend was found, that is, the alkoxy derivatives are less viscous than their alkenyl‐substituted analogues. Of the crystalline compounds, X‐ray diffraction data were recorded and related to their molecular properties. Upon alkoxy substitution, the electrochemical cathodic limit potential was found to be more positive, whereas the complete electrochemical window of the alkenyl‐substituted imidazolium salts was shifted to somewhat more positive potentials.     

Electrochemical and Structural Study of Layered P2‐Type Na2/3Ni1/3Mn2/3O2 as Cathode Material for Sodium‐Ion Battery

P2‐type Na_2/3Ni_1/3Mn_2/3O₂ was synthesized by a controlled co‐precipitation method followed by a high‐temperature solid‐state reaction and was used as a cathode material for a sodium‐ion battery (SIB). The electrochemical behavior of this layered material was studied and an initial discharge capacity of 151.8 mA h g^?1 was achieved in the voltage range of 1.5–3.75 V versus Na⁺/Na. The retained discharge capacity was found to be 123.5 mA h g^?1 after charging/discharging 50 cycles, approximately 81.4 % of the initial discharge capacity. In situ X‐ray diffraction analysis was used to investigate the sodium insertion and extraction mechanism and clearly revealed the reversible structural changes of the P2‐Na_2/3Ni_1/3Mn_2/3O₂ and no emergence of the O2‐Ni_1/3Mn_2/3O₂ phase during the cycling test, which is important for designing stable and high‐performance SIB cathode materials.     

FeIII Quinolylsalicylaldimine Complexes: A Rare Mixed‐Spin‐State Complex and Abrupt Spin Crossover

A new synthesis of (8‐quinolyl)‐5‐methoxysalicylaldimine (Hqsal‐5‐OMe) is reported and its crystal structure is presented. Two Fe^III complexes, [Fe(qsal‐5‐OMe)₂]Cl ? solvent (solvent=2 MeOH ? 0.5 H₂O ( 1 ) and MeCN ? H₂O ( 2 )) have been prepared and their structural, electronic and magnetic properties studied. [Fe(qsal‐5‐OMe)₂] Cl ? 2 MeOH ? 0.5 H₂O ( 1 ) exhibits rare crystallographically independent high‐spin and low‐spin Fe^III centres at 150 K, whereas [Fe(qsal‐5‐OMe)₂]Cl ? MeCN ? H₂O ( 2 ) is low spin at 100 K. In both structures there are extensive π–π and C? H???π interactions. SQUID magnetometry of 2 reveals an unusual abrupt stepped‐spin crossover with T_1/2=245 K and 275 K for steps 1 and 2, respectively, with a slight hysteresis of 5 K in the first step and a plateau of 15 K between the steps. In contrast, 1 is found to undergo an abrupt half‐spin crossover also with a hysteresis of 10 K. The two compounds are the first Fe^III complexes of a substituted qsal ligand to exhibit abrupt spin crossover. These conclusions are supported by ⁵⁷Fe Mössbauer spectroscopy. Both complexes exhibit reversible reduction to Fe^II at ?0.18 V and irreversible oxidation of the coordinated qsal‐5‐OMe ligand at +1.10 V.     

Crystal‐to‐Crystal Transformation: An HgII Metal–Organic Polymer Constructed with a Triazole Ligand

A new one‐dimensional double‐chain Hg^II coordination polymer containing the ligand 3,5‐bis(4‐pyridyl)‐4‐amino‐1,2,4‐triazole (bpatrz) and thiocyanate anions, namely, {[Hg₂(μ‐bpatrz)(μ‐SCN)₂(SCN)₂] · MeOH}_n ( 1 ), has been synthesized and structurally characterized by single‐crystal X‐ray diffraction. Compound 1 displays bright blue luminescence with emission maxima around 370 and 440 nm in solution and the solid state, respectively. Uptake and release of MeOH by 1 were investigated by powder X‐ray diffraction, thermogravimetric analysis, elemental analysis, and IR and NMR spectroscopy.     

Regioselective Cage Opening of La2@D2(10611)‐C72 with 5,6‐Diphenyl‐3‐(2‐pyridyl)‐1,2,4‐triazine

The thermal reaction of the endohedral metallofullerene La₂@D₂(10611)‐C₇₂, which contains two pentalene units at opposite ends of the cage, with 5,6‐diphenyl‐3‐(2‐pyridyl)‐1,2,4‐triazine proceeded selectively to afford only two bisfulleroid isomers. The molecular structure of one isomer was determined using single‐crystal X‐ray crystallography. The results suggest that the [4+2] cycloaddition was initiated in a highly regioselective manner at the C? C bond connecting two pentagon rings of C₇₂. Subsequent intramolecular electrocyclization followed by cycloreversion resulted in the formation of an open‐cage derivative having three seven‐membered ring orifices on the cage and a significantly elongated cage geometry. The reduction potentials of the open‐cage derivatives were similar to those of La₂@D₂‐C₇₂ whereas the oxidation potentials were shifted more negative than those of La₂@D₂‐C₇₂. These results point out that further oxidation could occur easily in the derivatives.     

A New Chair‐shaped Conformation Containing HgHgOHgHgO: Synthesis and Structure of Hg4(L2)2(NO3)4 (L2 = morpholin‐4‐ylpyridin‐2‐ylmethyleneamine)

. The complex Hg₄(L²)₂(NO₃)₄ ( 1 ) (L² = morpholin‐4‐ylpyridin‐2‐ylmethyleneamine) has been synthesized and characterized by CHN analysis, IR, and UV/Vis spectroscopy. The crystal structure of 1 was determined using single‐crystal X‐ray diffraction. The crystal structure of 1 contains four mercury atoms, four nitrate anions (two terminal and two bridge ones) and two L² ligand molecules. A chair shape, six‐membered ring is formed with the sequence OHgHgOHgHg built from Hg–Hg dumbbells and oxygen atoms from the nitrate co‐ligands. In the crystal structure, the asymmetric unit of the compound is built up by one‐half of the molecule. It contains the Hg₂²⁺ moiety with a mercury–mercury bonded core, in which one diimine ligand is coordinated to one of the mercury atoms. The nitrate anions act as anisobidentate and bidentate ligands.     

Electrochemical Properties of Substituted 2‐Methyl‐1,4‐Naphthoquinones: Redox Behavior Predictions

In the context of the investigation of drug‐induced oxidative stress in parasitic cells, electrochemical properties of a focused library of polysubstituted menadione derivatives were studied by cyclic voltammetry. These values were used, together with compatible measurements from literature (quinones and related compounds), to build and evaluate a predictive structure–redox potential model (quantitative structure–property relationship, QSPR). Able to provide an online evaluation (through Web interface) of the oxidant character of quinones, the model is aimed to help chemists targeting their synthetic efforts towards analogues of desired redox properties     

Different Complexation Behavior of P‐Functionalized Ferrocene Derivatives Towards SnCl2, SnCl4 and SnPh2Cl2: Auto‐ionization and Redox‐Type Reactions

The novel phosphonyl‐substituted ferrocene derivatives [Fe(η⁵‐Cp)(η⁵‐C₅H₃{P(O)(O‐iPr)₂}₂‐1,2)] ( Fc^1,2 ) and [Fe{η⁵‐C₅H₄P(O)(O‐iPr)₂}₂] ( Fc^1,1′ ) react with SnCl₂, SnCl₄, and SnPh₂Cl₂, giving the corresponding complexes [(Fc^1,2)₂SnCl][SnCl₃] ( 1 ), [{(Fc^1,1′)SnCl₂}_n] ( 2 ), [(Fc^1,1′)SnCl₄] ( 3 ), [{(Fc^1,1′)SnPh₂Cl₂}_n] ( 4 ), and [(Fc^1,2)SnCl₄] ( 5 ), respectively. The compounds are characterized by elemental analyses, ¹H, ¹³C, ³¹P, ¹¹⁹Sn NMR and IR spectroscopy, ³¹P and ¹¹⁹Sn CP‐MAS NMR spectroscopy, cyclovoltammetry, electrospray ionization mass spectrometry, and single‐crystal as well as powder X‐ray diffraction analyses. The experimental work is accompanied by DFT calculations, which help to shed light on the origin for the different reaction behavior of Fc^1,1′ and Fc^1,2 towards tin(II) chloride.     

A Novel Pentadentate Redox‐Active Ligand and Its Iron(III) Complexes: Electronic Structures and O2 Reactivity

A novel redox‐active ligand, H₄^Ph2SL^AP ( 1 ) which was designed to be potentially pentadentate with an O,N,S,N,O donor set is described. Treatment of 1 with two equivalents of potassium hydride gave access to octametallic precursor complex [H₂^Ph2SL^APK₂(thf)]₄ ( 2 ), which reacted with FeCl₃ to yield iron(III) complex [H₂^Ph2SL^APFeCl] ( 3 ). Employing Fe[N(SiMe₃)₂]₃ for a direct reaction with 1 led to ligand rearrangement through C?S bond cleavage and thiolate formation, finally yielding [HL^APFe] ( 5 ). Upon exposure to O₂, 3 and 5 are oxidized through formal hydrogen‐atom abstraction from the ligand NH units to form [^Ph2SL^SQFeCl] ( 4 ) and [L^SQFe] ( 6 ) featuring two or one coordinated iminosemiquinone moieties, respectively. Mössbauer measurements demonstrated that the iron centers remain in their +III oxidation states. Compounds 3 and 5 were tested with respect to their potential as models for the catechol dioxygenase. Thus, they were treated with 3,5‐di‐tert‐butyl‐catechol, triethylamine and O₂. It turned out that the iron–catecholate complexes react with O₂ in dichloromethane at ambient conditions through C?C bond cleavage mainly forming extradiol cleavage products. Intradiol products are only side products and quinone formation becomes negligible. This observation has been rationalized by a dissociation of two donor functions upon coordination of the catecholate.     

Syntheses and Structural Characterization of Four New Silver(I) Complexes with the N,N′(O)‐bidentate Bridging Ligands

Four new bridged silver(I) complexes, namely [Ag₂(μ₂‐teda)(μ₂‐fbc)₂] ( 1 ), [Ag₂(μ₂‐1,6‐dah)₂](bpdc) · 4H₂O ( 2 ), [Ag₂(μ₂‐2‐ap)(2‐ap)(bnb)] · 0.34H₂O ( 3 ), [Ag₂(μ₂‐pyc)₂(2‐apy)₂] · 0.5H₂O ( 4 ), have been synthesized and characterized by elemental analysis and crystallographic methods [fbc = 4‐fluorobenzoate, teda = triethylenediamine ( 1 ); bpdc = biphenyl‐4,4′‐dicarboxylate, 1,6‐dah = 1,6‐diaminohexane ( 2 ); bnb = 3,5‐binitrobenzoate, 2‐ap = 2‐aminopyrimidine ( 3 ); pyc = 3‐pyridinecarboxylate acid, 2‐apy = 2‐aminopyridine ( 4 )]. Complex 1 contains a 1D linear chain paralleling to the c‐axis, whereas in complex 2 silver(I) atoms were bridged by the 1,6‐dah ligand into a zigzag chain, further giving a 1D ribbon by weak Ag ··· Ag interactions. Complex 3 consists of a dinuclear silver(I) [Ag₂(μ₂‐2‐ap)(2‐ap)(bnb)] moiety and a lattice water molecule, forming a 3D network via a number of hydrogen‐bonding interactions such as N–H ··· O, N–H ··· N and C–H ··· O hydrogen bond and other weak interactions such Ag ··· Ag, Ag ··· N, N ··· O as well as O ··· O interaction. Similar to 3 , the asymmetric unit of 4 consists of one dinuclear silver(I) [Ag₂(μ₂‐pyc)₂(2‐apy)₂] moiety and half lattice water molecule, further generating a tetranuclear silver(I) {[Ag₂(μ₂‐pyc)₂(2‐apy)₂]₂ · H₂O} moiety. These moieties construct a 3D supramolecular network structure of 4 through N–H ··· O, O–H ··· O and C–H ··· O hydrogen bonds as well as other weak interactions such as Ag ··· O and N ··· O interactions.     

Synthesis and Structural Characterization of Neutral Hexacoordinate Silicon(IV) Complexes with SiO2N4 Skeletons

Surrounded by six : A series of novel neutral hexacoordinate silicon(IV ) complexes with SiO₂N₄ skeletons, containing two bidentate monoanionic O,N ligands and two monoanionic NCX (X = O, S) ligands, was synthesized. The formation of the title compounds involved some unexpected transformations of the bidentate O,N ligands.

     

Hypervalent Organoselenium(II) Compounds with Organophosphorus Ligands. Crystal and Molecular Structure of [2‐(iPr2NCH2)C6H4]Se[S2PR′2] (R′ = Ph,OiPr)

Redistribution reactions between diorganodiselenides of type [2‐(R₂NCH₂)C₆H₄]₂Se₂ [R = Et, iPr] and bis(diorganophosphinothioyl disulfanes of type [R′₂P(S)S]₂ (R = Ph, OiPr) resulted in the hypervalent [2‐(R₂NCH₂)C₆H₄]SeSP(S)R′₂ [R = Et, R′ = Ph ( 1 ), OiPr ( 2 ); R = iPr, R′ = Ph ( 3 ), OiPr ( 4 )] species. All new compounds were characterized by solution multinuclear NMR spectroscopy (¹H, ¹³C, ³¹P, ⁷⁷Se) and the solid compounds 1 , 3 , and 4 also by FT‐IR spectroscopy. The crystal and molecular structures of 3 and 4 were determined by single‐crystal X‐ray diffraction. In both compounds the N(1) atom is intramolecularly coordinated to the selenium atom, resulting in T‐shaped coordination arrangements of type (C,N)SeS. The dithio organophosphorus ligands act monodentate in both complexes, which can be described as essentially monomeric species. Weak intermolecular S ··· H contacts could be considered in the crystal of 3 , thus resulting in polymeric zig‐zag chains of R and S isomers, respectively.