Identification of tert‐Butyl Cations in Zeolite H‐ZSM‐5: Evidence from NMR Spectroscopy and DFT Calculations

Experimental evidence for the presence of tert‐butyl cations, which are important intermediates in acid‐catalyzed heterogeneous reactions, on solid acids has still not been provided to date. By combining density functional theory (DFT) calculations with ¹H/¹³C magic‐angle‐spinning NMR spectroscopy, the tert‐butyl cation was successfully identified on zeolite H‐ZSM‐5 upon conversion of isobutene by capturing this intermediate with ammonia.     

Direct Detection of Supramolecular Reaction Centers in the Methanol‐to‐Olefins Conversion over Zeolite H‐ZSM‐5 by 13C–27Al Solid‐State NMR Spectroscopy

Hydrocarbon‐pool chemistry is important in methanol to olefins (MTO) conversion on acidic zeolite catalysts. The hydrocarbon‐pool (HP) species, such as methylbenzenes and cyclic carbocations, confined in zeolite channels during the reaction are essential in determining the reaction pathway. Herein, we experimentally demonstrate the formation of supramolecular reaction centers composed of organic hydrocarbon species and the inorganic zeolite framework in H‐ZSM‐5 zeolite by advanced ¹³C–²⁷Al double‐resonance solid‐state NMR spectroscopy. Methylbenzenes and cyclic carbocations located near Brønsted acid/base sites form the supramolecular reaction centers in the zeolite channel. The internuclear spatial interaction/proximity between the ¹³C nuclei (associated with HP species) and the ²⁷Al nuclei (associated with Brønsted acid/base sites) determines the reactivity of the HP species. The closer the HP species are to the zeolite framework Al, the higher their reactivity in the MTO reaction.     

Experimental Evidence on the Formation of Ethene through Carbocations in Methanol Conversion over H‐ZSM‐5 Zeolite

The methanol to olefins conversion over zeolite catalysts is a commercialized process to produce light olefins like ethene and propene but its mechanism is not well understood. We herein investigated the formation of ethene in the methanol to olefins reaction over the H‐ZSM‐5 zeolite. Three types of ethylcyclopentenyl carbocations, that is, the 1‐methyl‐3‐ethylcyclopentenyl, the 1,4‐dimethyl‐3‐ethylcyclopentenyl, and the 1,5‐dimethyl‐3‐ethylcyclopentenyl cation were unambiguously identified under working conditions by both solid‐state and liquid‐state NMR spectroscopy as well as GC‐MS analysis. These carbocations were found to be well correlated to ethene and lower methylbenzenes (xylene and trimethylbenzene). An aromatics‐based paring route provides rationale for the transformation of lower methylbenzenes to ethene through ethylcyclopentenyl cations as the key hydrocarbon‐pool intermediates.     

π‐Interactions between Cyclic Carbocations and Aromatics Cause Zeolite Deactivation in Methanol‐to‐Hydrocarbon Conversion

The understanding of catalyst deactivation represents one of the major challenges for the methanol‐to‐hydrocarbon (MTH) reaction over acidic zeolites. Here we report the critical role of intermolecular π‐interactions in catalyst deactivation in the MTH reaction on zeolites H‐SSZ‐13 and H‐ZSM‐5. π‐interaction‐induced spatial proximities between cyclopentenyl cations and aromatics in the confined channels and/or cages of zeolites are revealed by two‐dimensional solid‐state NMR spectroscopy. The formation of naphtalene as a precursor to coke species is favored due to the reaction of aromatics with the nearby cyclopentenyl cations and correlates with both acid density and zeolite topology.     

Curing chemistry of phenylethynyl‐terminated imide oligomers: Synthesis of 13C‐labeled oligomers and solid‐state NMR studies

4‐(Phenylethynyl‐α,β‐¹³C)phthalic anhydride (PEPA) and ¹³C‐labeled phenylethynyl‐terminated imide (PETI) oligomers were synthesized, and solid‐state ¹³C nuclear magnetic resonance (NMR) spectroscopy was used to determine the structure of cured oligomers. Solid‐state ¹³C NMR spectra were collected before and after thermal curing. Using solid‐state ¹³C NMR difference spectroscopy, several cure products were identified. The observed ¹³C NMR resonances were assigned to four different classes of cure products: aromatics, products from backbone addition (substituted stilbenes and tetraphenylethanes), polyenes, and cyclobutadiene cyclodimers. The effects of postcuring and oligomer chain length on the structure of the cured resins were examined. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3486–3497, 2000     

Study of the structure of 1‐hydroxymethylindazole and 1‐hydroxymethylbenzotriazole by X‐ray crystallography,multinuclear NMR in solution and DFT calculations

1‐Hydroxymethylindazole and 1‐hydroxymethylbenzotriazole have been studied in solution by ¹H, ¹³C and ¹⁵N NMR spectroscopy and the X‐ray structure of the second compound determined. DFT and GIAO calculations have been used to discuss geometries, energies (comparatively with 2‐substituted isomers) and NMR chemical shifts.     

Preparation of an Organometallic Molecular Square by Self‐Assembly of Phosphorus‐Containing Building Blocks

Molecular squares are among the most common supramolecular architectures, but phospha‐organometallic complexes have not been used as building blocks for this type of structure. Herein we describe the formation of the molecular square [Au{Co(P₂C₂tBu₂)₂}]₄ ( 1 ) by the self‐assembly of anionic 1,3‐diphosphacyclobutadiene cobalt complexes and gold(I) cations. The X‐ray crystallographic determination of the molecular structure of 1 is complemented by solid‐state ³¹P and ¹³C NMR investigations. High‐level DFT calculations confirm the assignment of the ³¹P and ¹³C NMR resonances.     

Solid‐State NMR and DFT Studies on the Formation of Well‐Defined Silica‐Supported Tantallaaziridines: From Synthesis to Catalytic Application

Single‐site, well‐defined, silica‐supported tantallaaziridine intermediates [≡Si‐O‐Ta(η²‐NRCH₂)(NMe₂)₂] [R=Me ( 2 ), Ph ( 3 )] were prepared from silica‐supported tetrakis(dimethylamido)tantalum [≡Si‐O‐Ta(NMe₂)₄] ( 1 ) and fully characterized by FTIR spectroscopy, elemental analysis, and ¹H,¹³C HETCOR and DQ TQ solid‐state (SS) NMR spectroscopy. The formation mechanism, by β‐H abstraction, was investigated by SS NMR spectroscopy and supported by DFT calculations. The C?H activation of the dimethylamide ligand is favored for R=Ph. The results from catalytic testing in the hydroaminoalkylation of alkenes were consistent with the N‐alkyl aryl amine substrates being more efficient than N‐dialkyl amines.     

Alkane Activation Initiated by Hydride Transfer: Co‐conversion of Propane and Methanol over H‐ZSM‐5 Zeolite

Co‐conversion of alkane with another reactant over zeolite catalysts has emerged as a new approach to the long‐standing challenge of alkane transformation. With the aid of solid‐state NMR spectroscopy and GC‐MS analysis, it was found that the co‐conversion of propane and methanol can be readily initiated by hydride transfer at temperatures of ≥449 K over the acidic zeolite H‐ZSM‐5. The formation of ¹³C‐labeled methane and singly ¹³C‐labeled n‐butanes in selective labeling experiments provided the first evidence for the initial hydride transfer from propane to surface methoxy intermediates. The results not only provide new insight into carbocation chemistry of solid acids, but also shed light on the low‐temperature transformation of alkanes for industrial applications.     

Single‐Particle Spectroscopy on Large SAPO‐34 Crystals at Work: Methanol‐to‐Olefin versus Ethanol‐to‐Olefin Processes

The formation of hydrocarbon pool (HCP) species during methanol‐to‐olefin (MTO) and ethanol‐to‐olefin (ETO) processes have been studied on individual micron‐sized SAPO‐34 crystals with a combination of in situ UV/Vis, confocal fluorescence, and synchrotron‐based IR microspectroscopic techniques. With in situ UV/Vis microspectroscopy, the intensity changes of the λ=400 nm absorption band, ascribed to polyalkylated benzene (PAB) carbocations, have been monitored and fitted with a first‐order kinetics at low reaction temperatures. The calculated activation energy (E_a) for MTO, approximately 98 kJ mol^?1, shows a strong correlation with the theoretical values for the methylation of aromatics. This provides evidence that methylation reactions are the rate‐determining steps for the formation of PAB. In contrast for ETO, the E_a value is approximately 60 kJ mol^?1, which is comparable to the E_a values for the condensation of light olefins into aromatics. Confocal fluorescence microscopy demonstrates that during MTO the formation of the initial HCP species are concentrated in the outer rim of the SAPO‐34 crystal when the reaction temperature is at 600 K or lower, whereas larger HCP species are gradually formed inwards the crystal at higher temperatures. In the case of ETO, the observed egg‐white distribution of HCP at 509 K suggests that the ETO process is kinetically controlled, whereas the square‐shaped HCP distribution at 650 K is indicative of a diffusion‐controlled process. Finally, synchrotron‐based IR microspectroscopy revealed a higher degree of alkylation for aromatics for MTO as compared to ETO, whereas high reaction temperatures favor dealkylation processes for both the MTO and ETO processes.     

Palladium(II) Acetylide Complexes with Pincer‐Type Ligands: Photophysical Properties,Intermolecular Interactions,and Photo‐cytotoxicity

Two classes of cationic palladium(II) acetylide complexes containing pincer‐type ligands, 2,2′:6′,2′′‐terpyridine (terpy) and 2,6‐bis(1‐butylimidazol‐2‐ylidenyl)pyridine (C^N^C), were prepared and structurally characterized. Replacing terpy with the strongly σ‐donating C^N^C ligand with two N‐heterocyclic carbene (NHC) units results in the Pd^II acetylide complexes displaying phosphorescence at room temperature and stronger intermolecular interactions in the solid state. X‐ray crystal structures of [Pd(terpy)(C≡CPh)]PF₆ ( 1 ) and [Pd(C^N^C)(C≡CPh)]PF₆ ( 7 ) reveal that the complex cations are arranged in a one‐dimensional stacking structure with pair‐like Pd^II⋅⋅⋅Pd^II contacts of 3.349 Å for 1 and 3.292 Å for 7 . Density functional theory (DFT) and time‐dependent density functional theory (TD‐DFT) calculations were used to examine the electronic properties. Comparative studies of the [Pt(L)(C≡CPh)]⁺ analogs by ¹H NMR spectroscopy shed insight on the intermolecular interactions of these Pd^II acetylide complexes. The strong Pd−C_carbene bonds render 7 and its derivative sufficiently stable for investigation of photo‐cytotoxicity under cellular conditions.     

A Study of Transition‐Metal Organometallic Complexes Combining 35Cl Solid‐State NMR Spectroscopy and 35Cl NQR Spectroscopy and First‐Principles DFT Calculations

A series of transition‐metal organometallic complexes with commonly occurring metal? chlorine bonding motifs were characterized using ³⁵Cl solid‐state NMR (SSNMR) spectroscopy, ³⁵Cl nuclear quadrupole resonance (NQR) spectroscopy, and first‐principles density functional theory (DFT) calculations of NMR interaction tensors. Static ³⁵Cl ultra‐wideline NMR spectra were acquired in a piecewise manner at standard (9.4 T) and high (21.1 T) magnetic field strengths using the WURST‐QCPMG pulse sequence. The ³⁵Cl electric field gradient (EFG) and chemical shielding (CS) tensor parameters were readily extracted from analytical simulations of the spectra; in particular, the quadrupolar parameters are shown to be very sensitive to structural differences, and can easily differentiate between chlorine atoms in bridging and terminal bonding environments. ³⁵Cl NQR spectra were acquired for many of the complexes, which aided in resolving structurally similar, yet crystallographically distinct and magnetically inequivalent chlorine sites, and with the interpretation and assignment of ³⁵Cl SSNMR spectra. ³⁵Cl EFG tensors obtained from first‐principles DFT calculations are consistently in good agreement with experiment, highlighting the importance of using a combined approach of theoretical and experimental methods for structural characterization. Finally, a preliminary example of a ³⁵Cl SSNMR spectrum of a transition‐metal species (TiCl₄) diluted and supported on non‐porous silica is presented. The combination of ³⁵Cl SSNMR and ³⁵Cl NQR spectroscopy and DFT calculations is shown to be a promising and simple methodology for the characterization of all manner of chlorine‐containing transition‐metal complexes, in pure, impure bulk and supported forms.     

Exploring the Molecular Structure of Imidazolium–Silica‐Based Nanoparticle Networks by Combining Solid‐State NMR Spectroscopy and First‐Principles Calculations

A DFT‐based molecular model for imidazolium–silica‐based nanoparticle networks (INNs) is presented. The INNs were synthesized and characterized by using small‐angle X‐ray scattering (SAXS), NMR spectroscopy, and theoretical ab initio calculations. ¹¹B and ³¹P HETCOR CP MAS experiments were recorded. Calculated ¹⁹F NMR spectroscopy results, combined with the calculated anion–imidazolium (IM) distances, predicted the IM chain density in the INN, which was also confirmed from thermogravimetric analysis/mass spectrometry results. The presence of water molecules trapped between the nanoparticles is also suggested. First considerations on possible π–π stacking between the IM rings are presented. The predicted electronic properties confirm the photoluminescence emissions in the correct spectral domain.     

Solid‐State NMR and DFT Combined for the Surface Study of Functionalized Silicon Nanoparticles

Silicon nanoparticles (NPs) serve a wide range of optical, electronic, and biological applications. Chemical grafting of various molecules to Si NPs can help to passivate their reactive surfaces, “fine‐tune” their properties, or even give them further interesting features. In this work, ¹H, ¹³C, and ²⁹Si solid‐state NMR spectroscopy has been combined with density functional theory calculations to study the surface chemistry of hydride‐terminated and alkyl‐functionalized Si NPs. This combination of techniques yields assignments for the observed chemical shifts, including the contributions resulting from different surface planes, and highlights the presence of physisorbed water. Resonances from near‐surface ¹³C nuclei were shown to be substantially broadened due to surface disorder and it is demonstrated that in an ambient environment hydride‐terminated Si NPs undergo fast back‐bond oxidation, whereas long‐chain alkyl‐functionalized Si NPs undergo slow oxidation. Furthermore, the combination of NMR spectroscopy and DFT calculations showed that the employed hydrosilylation reaction involves anti‐Markovnikov addition of the 1‐alkene to the surface of the Si NPs.     

Theoretical and experimental 1H, 13C and 15N NMR studies of N‐alkylation of substituted tetrazolo[1,5‐a]pyridines

The ¹⁵N as well as ¹H and ¹³C chemical shifts of nine substituted tetrazolopyridines and their corresponding tetrazolopyridinium salts have been determined by using NMR spectroscopy at the natural abundance level of all nuclei in CD₃CN. In this paper, we report, for the first time, the N‐alkylation reaction of electron deficient tetrazolopyridines. The treatment of tetrazolopyridines 5–13 with one equivalent of trialkyloxonium tetrafluoroborate leads to a mixture of two isomers, i.e. N3‐ and N2‐alkyl tetrazolo[1,5‐a]pyridinium salts. It has been observed that the N3‐isomer is always the major isomer, except in the case of the CF₃ substituent, where the two isomers are obtained in the same amount. The quaternary tetrazolopyridinium nitrogen N3 is shielded by around 100 ppm (parts per million) with respect to the parent tetrazolopyridine. Experimental data are interpreted by means of density functional theory (DFT) calculations, including solvent‐induced effects, within the conductor‐like polarizable continuum model (CPCM). Good agreements between theoretical and experimental ¹H, ¹³C and ¹⁵N NMR were found. The combination of multinuclear magnetic resonance spectroscopy with gauge including atomic orbital (GIAO) DFT calculations is a powerful tool in the structural elucidation for both neutral and cationic heterocycles and in the determination of the orientation of N‐alkylation of tetrazolopyridines. Copyright © 2009 John Wiley & Sons, Ltd.     

Structural studies on aryl‐substituted enaminoketones and their thio analogues. Part I. Analysis of high‐resolution 1H, 13C NMR and 13C CP MAS spectra combined with GIAO‐DFT calculations

A series of aryl‐substituted enaminoketones and their thio analogues in CDCl₃ solution and in the solid state were studied by the use of high‐resolution ¹H and ¹³C as well as ¹³C cross polarization magic angle spinning (CP MAS) NMR spectra in combination with gauge including atomic orbitals‐density functional theory (GIAO‐DFT) calculations performed at the B3PW91/6–311 + + G(d,p) level of theory using the B3PW91/6‐311 + + G(d,p)‐optimized geometries. The analysis of the ¹³C NMR spectra in solution was done by using the Incredible Natural Abundance DoublE QUAntum Transfer Experiment (INADEQUATE) technique, whereas trends observed in the ¹³C shielding constants, calculated for the compounds studied, were a great help in assigning most of the signals in the ¹³C CP MAS NMR spectra. It was established on the basis of the experimental and theoretical NMR data that both groups of compounds exist in the form of Z‐s‐Z‐s‐E isomers in CDCl₃ solution as well as in the solid state, with the NH hydrogen atom involved in intramolecular hydrogen bonding. This conclusion is in agreement with the fact that some of the compounds studied reveal liquid‐crystalline properties. Three‐bond H, H and C, H coupling constants measured in solution played a crucial role in the structure elucidation. Copyright © 2009 John Wiley & Sons, Ltd.     

NMR Crystallography: Evaluation of Hydrogen Positions in Hydromagnesite by 13C{1H} REDOR Solid‐State NMR and Density Functional Theory Calculation of Chemical Shielding Tensors

Solid‐state NMR measurements coupled with density functional theory (DFT) calculations demonstrate how hydrogen positions can be refined in a crystalline system. The precision afforded by rotational‐echo double‐resonance (REDOR) NMR to interrogate ¹³C–¹H distances is exploited along with DFT determinations of the ¹³C tensor of carbonates (CO₃^2?). Nearby ¹H nuclei perturb the axial symmetry of the carbonate sites in the hydrated carbonate mineral, hydromagnesite [4 MgCO₃?Mg(OH)₂?4 H₂O]. A match between the calculated structure and solid‐state NMR was found by testing multiple semi‐local and dispersion‐corrected DFT functionals and applying them to optimize atom positions, starting from X‐ray diffraction (XRD)‐determined atomic coordinates. This was validated by comparing calculated to experimental ¹³C{¹H} REDOR and ¹³C chemical shift anisotropy (CSA) tensor values. The results show that the combination of solid‐state NMR, XRD, and DFT can improve structure refinement for hydrated materials.     

Extra‐Framework Aluminum‐Assisted Initial C−C Bond Formation in Methanol‐to‐Olefins Conversion on Zeolite H‐ZSM‐5

Surface methoxy species bound to an extra‐framework Al (SMS‐EFAL) was unambiguously identified by advanced ¹³C‐{²⁷Al} double‐resonance solid‐state NMR technique in the methanol‐to‐olefins reaction on H‐ZSM‐5 zeolite. The high reactivity of the SMS‐EFAL leads to the formation of surface ethoxy species and ethanol as the key intermediates for ethene generation in the early reaction stage. A direct route for the initial C?C bond formation in ethene was proposed and corroborated by density functional theory calculations.     

The Studies of Structure of 2N‐(3‐phenyl‐allyl‐)(5‐phenyl‐[1,3,4] Thiadiazol‐2‐yl) Amine in Solution

2N‐(3‐phenyl‐allyl‐)(5‐phenyl‐[1,3,4] thiadiazol‐2‐yl) amine was studied by means of the ¹H, ¹³C, ¹⁵N NMR spectroscopy and DFT calculations. On the basis of the one‐dimensional ¹H, ¹³C, ¹⁵N‐NMR and two‐dimensional ¹H‐¹³C HMQC, ¹H‐¹³C HMBC, ¹H‐¹⁵N HMQC, ¹H¹H NOESY, ¹H¹H COSY correlation spectra the amine‐type and the imine‐type tautomers have been determined in the solution. Variety of structural forms including: biradical, ionic–biradical, and ionic structures of the amine‐type a and of the imine‐type b , c tautomers exist in the solution. According to the DFT computations the differences in the total energy between a and b , a and c , and b and c tautomers are equal to 1.5 kJ/mol, 1.2 kJ/mol, and 0.3 kJ/mol, respectively.     

Bis(4‐methylbenzylammonium) tetrachloridozincate: a new noncentrosymmetric structure characterized by 13C CP–MAS NMR spectroscopy

A new noncentrosymmetric organic–inorganic hybrid material, (C₈H₁₂N)₂[ZnCl₄], has been synthesized as single crystals at room temperature and characterized by X‐ray diffraction and solid‐state NMR spectroscopy. Its novel structure consists of two 4‐methylbenzylammonium cations and one [ZnCl₄]²⁻ anion connected by N—H...Cl and C—H...Cl hydrogen bonds, two of which are three‐centre interactions. The Zn^II metal centre has a slightly distorted tetrahedral coordination geometry. Results from ¹³C CP–MAS NMR spectroscopy are in good agreement with the X‐ray structure. Density functional theory calculations allow the assignment of the carbon peaks to the independent crystallographic sites.