Comparison of Cu‐ZSM‐5 Zeolites and Cu‐MOF‐505 Metal‐Organic Frameworks as Heterogeneous Catalysts for the Mukaiyama Aldol Reaction: A DFT Mechanistic Study

The density functional theory (DFT) model ONIOM(M06L/6‐311++G(2df,2p):UFF was employed to reveal the catalytic activity of Cu^II in the paddle‐wheel unit of the metal‐organic framework (MOF)‐505 material in the Mukaiyama aldol reaction compared with the activity of Cu‐ZSM‐5 zeolites. The aldol reaction between a silyl enol ether and formaldehyde catalyzed by the Lewis acidic site of both materials takes place through a concerted pathway, in which the formation of the C? C bond and the transfer of the silyl group occurs in a single step. MOF‐505 and Cu‐ZSM‐5 are predicted to be efficient catalysts for this reaction as they strongly activate the formaldehyde carbonyl carbon electrophile, which leads to a considerably lower reaction barrier compared with the gas‐phase system. Both MOF‐505 and Cu‐ZSM‐5 catalysts stabilize the reacting species along the reaction coordinate, thereby lowering the activation energy, compared to the gas‐phase system. The activation barriers for the MOF‐505, Cu‐ZSM‐5, and gas‐phase system are 48, 21, and 61 kJ mol^?1, respectively. Our results show the importance of the enveloping framework by stabilizing the reacting species and promoting the reaction.     

Terbium–organic framework as heterogeneous Lewis acid catalyst for β‐aminoalcohol synthesis: Efficient,reusable and green catalytic method

A terbium–organic framework (Tb‐MOF) was prepared using a previously reported procedure. Tb‐MOF was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, powder X‐ray diffraction and surface area analysis. Tb‐MOF was employed as a heterogeneous Lewis acid catalyst for the synthesis of β‐aminoalcohols. Also, the effect of ultrasonic irradiation was examined in the catalytic aminolysis of styrene oxide. The reaction conditions were optimized by variation of reaction time, catalyst concentration and solvent. A variety of β‐aminoalcohols were synthesized and characterized. The Tb‐MOF catalyst showed excellent selectivity and high yield for these transformations.     

Highly Mesoporous Metal‐Organic Frameworks as Synergistic Multimodal Catalytic Platforms for Divergent Cascade Reactions

Rational engineering and assimilation of diverse chemo‐ and biocatalytic functionalities in a single nanostructure is highly desired for efficient multistep chemical reactions but has so far remained elusive. Here, we design and synthesize multimodal catalytic nanoreactors (MCNRs) based on a mesoporous metal‐organic framework (MOF). The MCNRs consist of customizable metal nanocrystals and stably anchored enzymes in the mesopores, as well as coordinatively unsaturated cationic metal MOF nodes, all within a single nanoreactor space. The highly intimate and diverse catalytic mesoporous microenvironments and facile accessibility to the active site in the MCNR enables the cooperative and synergistic participation from different chemo‐ and biocatalytic components. This was shown by one‐pot multistep cascade reactions involving a heterogeneous catalytic nitroaldol reaction followed by a [Pd/lipase]‐catalyzed chemoenzymatic dynamic kinetic resolution to yield optically pure (>99 % ee) nitroalcohol derivatives in quantitative yields.     

Template‐Induced Diverse Metal–Organic Materials as Catalysts for the Tandem Acylation–Nazarov Cyclization

In our continuing quest to develop a metal–organic framework (MOF)‐catalyzed tandem pyrrole acylation–Nazarov cyclization reaction with α,β‐unsaturated carboxylic acids for the synthesis of cyclopentenone[b]pyrroles, which are key intermediates in the synthesis of natural product (±)‐roseophilin, a series of template‐induced Zn‐based ( 1–3 ) metal‐organic frameworks (MOFs) have been solvothermally synthesized and characterized. Structural conversions from non‐porous MOF 1 to porous MOF 2 , and back to non‐porous MOF 3 arising from the different concentrations of template guest have been observed. The anion–π interactions between the template guests and ligands could affect the configuration of ligands and further tailor the frameworks of 1–3 . Futhermore, MOFs 1–3 have shown to be effective heterogeneous catalysts for the tandem acylation–Nazarov cyclization reaction. In particular, the unique structural features of 2 , including accessible catalytic sites and suitable channel size and shape, endow 2 with all of the desired features for the MOF‐catalyzed tandem acylation–Nazarov cyclization reaction, including heterogeneous catalyst, high catalytic activity, robustness, and excellent selectivity. A plausible mechanism for the catalytic reaction has been proposed and the structure–reactivity relationship has been further clarified. Making use of 2 as a heterogeneous catalyst for the reaction could greatly increase the yield of total synthesis of (±)‐roseophilin.     

MOF‐promoted Three‐component Synthesis of Functionalized Pyrano[3,2‐c]chromen under Mild Conditions

A convenient and efficient route for synthesis of various derivatives of 3‐benzoyl‐4‐phenyl‐2‐(trifluoromethyl)pyrano[3,2‐c]chromen‐5(4H)‐one has been used via tandem Knoevenagel condensation–Michael addition and intramolecular cyclization sequence. These products have been synthesized in the presence of catalytic amount of metal–organic framework (MOF) and potassium carbonate as one‐pot, three‐component reaction. MOF catalyst has been separated easily with external magnet, and high purity of products has been obtained after washing with ethanol. This protocol has advantages of simplicity, mild condition, and high yield. More importantly, MOF has been easily recycled for three times.     

Multielectron‐Transfer‐based Rechargeable Energy Storage of Two‐Dimensional Coordination Frameworks with Non‐Innocent Ligands

The metallically conductive bis(diimino)nickel framework (NiDI), an emerging class of metal–organic framework (MOF) analogues consisting of two‐dimensional (2D) coordination networks, was found to have an energy storage principle that uses both cation and anion insertion. This principle gives high energy led by a multielectron transfer reaction: Its specific capacity is one of the highest among MOF‐based cathode materials in rechargeable energy storage devices, with stable cycling performance up to 300 cycles. This mechanism was studied by a wide spectrum of electrochemical techniques combined with density‐functional calculations. This work shows that a rationally designed material system of conductive 2D coordination networks can be promising electrode materials for many types of energy devices.     

Mesoporous Silica MCM‐41 Supported N‐Heterocyclic Carbene‐Pd Complex for Heck and Sonogashira Coupling Reactions

Heterocyclic carbene‐Pd complex was anchored onto the mesoporous silica MCM‐41 which exhibits high catalytic activity in Heck reaction under phosphine free reaction conditions for the reaction of iodo/bromoarenes with olefinic compounds such as butyl acrylate, isopropyl acrylate and styrene. This catalytic system also showed high activity for Sonogashira coupling reaction of various aryl halides under copper, phosphine and solvent‐free reaction conditions. The air and thermally stable catalyst were reused several times without significant loss of its activity. High efficiency of the catalyst along with its recycling ability and the rather low Pd‐loading demonstrated in both Heck and Sonogashira coupling reactions are the merits of the presented catalyst system.     

A Catalase‐Like Metal‐Organic Framework Nanohybrid for O2‐Evolving Synergistic Chemoradiotherapy

Tumor hypoxia, the “Achilles’ heel” of current cancer therapies, is indispensable to drug resistance and poor therapeutic outcomes especially for radiotherapy. Here we propose an in situ catalytic oxygenation strategy in tumor using porphyrinic metal‐organic framework (MOF)‐gold nanoparticles (AuNPs) nanohybrid as a therapeutic platform to achieve O₂‐evolving chemoradiotherapy. The AuNPs decorated on the surface of MOF effectively stabilize the nanocomposite and serve as radiosensitizers, whereas the MOF scaffold acts as a container to encapsulate chemotherapeutic drug doxorubicin. In vitro and in vivo studies verify that the catalase‐like nanohybrid significantly enhances the radiotherapy effect, alleviating tumor hypoxia and achieving synergistic anticancer efficacy. This hybrid nanomaterial remarkably suppresses the tumor growth with minimized systemic toxicity, opening new horizons for the next generation of theranostic nanomedicines.     

In Situ Generation of an N‐Heterocyclic Carbene Functionalized Metal–Organic Framework by Postsynthetic Ligand Exchange: Efficient and Selective Hydrosilylation of CO2

The reported metal–organic framework (MOF) catalyst realizes CO₂ to methanol transformation under ambient conditions. The MOF is one rare example containing metal‐free N‐heterocyclic carbene (NHC) moieties, which are installed using an in situ generation strategy involving the incorporation of an imidazolium bromide based linker into the MOF by postsynthetic ligand exchange. Importantly, the resultant NHC‐functionalized MOF is the first catalyst capable of performing quantitative hydrogen transfer from silanes to CO₂, thus achieving quantitative (>99 %) methanol yield. Density‐functional theory calculations indicate the high catalytic activity of the NHC sites in MOFs are attributed to the decreased reaction barrier of a reaction route involving the formation of an NHC‐silane adduct. In addition, the MOF‐immobilized NHC catalyst shows enhanced stability for up to eight cycles without base activation, as well as high selectivity towards the desired silyl methoxide product.     

Fabrication of carboxymethylated cellulose fibers supporting Ag NPs@MOF‐199s nanocatalysts for catalytic reduction of 4‐nitrophenol

In this work, we prepared high‐performance and recyclable nanocatalysts that consist of small and well‐dispersed silver nanoparticles (Ag NPs) immobilized onto Cu‐ based metal–organic framework (MOF‐199 s) supported by carboxymethylated cellulose fibers (CCFs). The as‐prepared green nanohybrid catalysts, namely Ag NPs@ MOF‐199 s/CCFs, were characterized using SEM, TEM, XRD and FT‐IR techniques. The catalytic performances showed that Ag NPs@ MOF‐199 s/CCFs catalysts exhibited a very high catalytic efficiency towards the reduction of 4‐nitrophenol to 4‐aminophenol. The enhanced catalytic performances are attributed to the improved dispersity, small particles of Ag NPs stabilized by the MOF‐199 s, and the porous catalyst structures. The introduction of cellulose fiber further facilitates the reuse and sustainability of the nanohybrid catalysts, showing a stable and high reusability (more than 91% of catalytic activity) even after five runs.     

Immobilization of phosphotungstic acid in an amino‐containing metal–organic framework for oxidative desulfurization

A composite material has been successfully synthesized using an amino‐containing metal–organic framework (NH₂‐MOF) and phosphotungstic acid (PTA). This composite was characterized using X‐ray diffraction, high‐resolution transmission electron microscopy, nitrogen adsorption–desorption measurements, Fourier transform infrared spectroscopy and X‐ray fluorescence. Characterization results confirmed the immobilization and good distribution of PTA in the NH₂‐MOF. The PTA/NH₂‐MOF was subsequently applied in the oxidative desulfurization of dibenzothiophene (DBT) with H₂O₂ as the oxidant in n‐octane under atmospheric conditions. Under optimal reaction conditions, the oxidative desulfurization conversion of DBT reached 100%, and there was no significant decrease of the catalytic activity after four recycles. Kinetic experiments were also performed for the reaction at various temperatures, which indicated that oxidative reaction rates followed pseudo first‐order kinetics, and the apparent activation energy for the desulfurization reaction was 34.1 kJ mol^?1. The results indicated that this material exhibited excellent catalytic performance for oxidative desulfurization of DBT. Copyright © 2016 John Wiley & Sons, Ltd.     

Rapid Synthesis of Chiral 1,2‐Bisphosphine Derivatives through Copper(I)‐Catalyzed Asymmetric Conjugate Hydrophosphination

1,2‐Bisphosphines have been identified as one class of important and powerful chiral ligands in asymmetric catalysis with transition metals. Herein, a copper(I)‐catalyzed asymmetric hydrophosphination of α,β‐unsaturated phosphine sulfides was developed with the assistance of “soft–soft” interaction between copper(I)‐catalyst and the phosphine sulfide moiety, which afforded 1,2‐bisphosphine derivatives with diversified electronic nature and steric hindrance in high to excellent yields with high to excellent enantioselectivity. Moreover, the challenging catalytic asymmetric hydrophosphination/protonation reaction was achieved with excellent enantioselectivity. Strikingly, the dynamic kinetic resolution of racemic diarylphosphines was also successfully carried out with high to excellent diastereo‐ and enantioselectivities. Interestingly, the nucleophilic copper(I)‐diphenylphosphide species was characterized by ³¹P NMR spectrum and mass spectrum. At last, three products were transformed to chiral 1,2‐bisphosphines, which were employed as ligands in Rh‐catalyzed asymmetric hydrogenation of α‐amino‐α,β‐unsaturated ester. The α‐amino acid derivative was produced in high enantioselectivity, which demonstrated the utility of the present methodology.     

In Situ Formation of Frustrated Lewis Pairs in a Water‐Tolerant Metal‐Organic Framework for the Transformation of CO2

Frustrated Lewis pairs (FLPs) consist of sterically hindered Lewis acids and Lewis bases, which provide high catalytic activity towards non‐metal‐mediated activation of “inert” small molecules, including CO₂ among others. One critical issue of homogeneous FLPs, however, is their instability upon recycling, leading to catalytic deactivation. Herein, we provide a solution to this issue by incorporating a bulky Lewis acid‐functionalized ligand into a water‐tolerant metal‐organic framework (MOF), named SION‐105 , and employing Lewis basic diamine substrates for the in situ formation of FLPs within the MOF. Using CO₂ as a C1‐feedstock, this combination allows for the efficient transformation of a variety of diamine substrates into benzimidazoles. SION‐105 can be easily recycled by washing with MeOH and reused multiple times without losing its identity and catalytic activity, highlighting the advantage of the MOF approach in FLP chemistry.     

Catalytic activity of 1‐methylimidazole‐based phosphine ligands in the palladium‐catalyzed Suzuki coupling reaction

The catalytic activities of three N‐methylimidazole‐based phosphine ligands in the Suzuki coupling reaction were tested using PdCl₂ as the catalyst. The results showed all three phosphine ligands exhibited excellent activity towards the Suzuki reaction, and the catalytic activity decreased with increasing number of imidazole groups. Copyright © 2014 John Wiley & Sons, Ltd.     

A Spiderweb‐Like Metal–Organic Framework Multifunctional Foam

Processing metal–organic frameworks (MOFs) into hierarchical macroscopic materials can greatly extend their practical applications. However, current strategies suffer from severe aggregation of MOFs and limited tuning of the hierarchical porous network. Now, a strategy is presented that can simultaneously tune the MOF loading, composition, spatial distribution, and confinement within various bio‐originated macroscopic supports, as well as control the accessibility, robustness, and formability of the support itself. This method enables the good dispersion of individual MOF nanoparticles on a spiderweb‐like network within each macrovoid even at high loadings (up to 86 wt %), ensuring the foam pores are highly accessible for excellent adsorption and catalytic capacity. Additionally, this approach allows the direct pre‐incorporation of other functional components into the framework. This strategy provides precise control over the properties of both the hierarchical support and MOF.     

A Reusable MOF‐Supported Single‐Site Zinc(II) Catalyst for Efficient Intramolecular Hydroamination of o‐Alkynylanilines

The exploitation of new and active earth‐abundant metal catalysts is critical for sustainable chemical production. Herein, we demonstrate the design of highly efficient, robust, and reusable Zn^II‐bipyridine‐based metal–organic framework (MOF) catalysts for the intramolecular hydroamination of o‐alkynylanilines to indoles. Under similar conditions homogeneous catalytic systems mainly provide hydrolysate. Our results prove that MOFs support unique internal environments that can affect the direction of chemical reactions. The Zn^II‐catalyzed hydroamination reaction can be conducted without additional ligands, base, or acid, and is thus a very clean reaction system with regard to its environmental impact.     

Tuning Catalysts to Tune the Products: Phosphine‐Catalyzed Aza‐Michael Addition Reaction of Hydrazones with Allenoates

A new tunable phosphine‐catalyzed aza‐Michael β‐addition reaction between allenoates and various hydrazones has been developed. These reactions are most‐efficiently promoted by a catalytic amount of phosphine catalysts. These atom‐economical reactions are operationally simple and their corresponding adducts can been achieved in high yields and high selectivity under mild reaction conditions. Further studies revealed that different phosphine catalyst can produce different adducts from the same starting materials.     

Copper‐based Metal‐organic Framework for Non‐enzymatic Electrochemical Detection of Glucose

A non‐enzymatic electrochemical glucose sensor based on a Cu‐based metal‐organic framework (Cu‐MOF) modified electrode was developed. The Cu‐MOF was prepared by a simple ionothermal synthesis, and the characterizations of the Cu‐MOF were studied by Fourier transform infrared spectroscopy (FT‐IR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), single‐crystal X‐ray powder diffraction (SCXRD), and X‐ray powder diffraction (XRD). Electrochemical behaviors of the Cu‐MOF modified electrode to glucose were measured by differential pulse voltammetry (DPV). The electrochemical results showed that the Cu‐MOF modified electrode exhibited an excellent electro‐catalytic oxidation towards glucose in the range of 0.06 μM to 5 mM with a sensitivity of 89 μA/mM cm² and a detection limit of 10.5 nM. Moreover, the fabricated sensor showed a high selectivity to the oxidation of glucose in coexistence with other interferences. The sensor was satisfactorily applied to the determination of glucose in urine samples. With the significant electrochemical performances, MOFs may provide a suitable platform in the construction of kinds of electrochemical sensors and/or biosensors and hold a great promise for sensing applications.     

Influence of the Base on Pd@MIL‐101‐NH2(Cr) as Catalyst for the Suzuki–Miyaura Cross‐Coupling Reaction

The chemical stability of metal–organic frameworks (MOFs) is a major factor preventing their use in industrial processes. Herein, it is shown that judicious choice of the base for the Suzuki–Miyaura cross‐coupling reaction can avoid decomposition of the MOF catalyst Pd@MIL‐101‐NH₂(Cr). Four bases were compared for the reaction: K₂CO₃, KF, Cs₂CO₃ and CsF. The carbonates were the most active and achieved excellent yields in shorter reaction times than the fluorides. However, powder XRD and N₂ sorption measurements showed that the MOF catalyst was degraded when carbonates were used but remained crystalline and porous with the fluorides. XANES measurements revealed that the trimeric chromium cluster of Pd@MIL‐101‐NH₂(Cr) is still present in the degraded MOF. In addition, the different countercations of the base significantly affected the catalytic activity of the material. TEM revealed that after several catalytic runs many of the Pd nanoparticles (NPs) had migrated to the external surface of the MOF particles and formed larger aggregates. The Pd NPs were larger after catalysis with caesium bases compared to potassium bases.     

Sodalite‐type Cu‐based Three‐dimensional Metal–Organic Framework for Efficient Oxygen Reduction Reaction

Inspired by copper‐based oxygen reduction biocatalysts, we have studied the electrocatalytic behavior of a Cu‐based MOF (Cu‐BTT) for oxygen reduction reaction (ORR) in alkaline medium. This catalyst reduces the oxygen at the onset (E_onset) and half‐wave potential (E^1/2) of 0. 940 V and 0.778 V, respectively. The high halfway potential supports the good activity of Cu‐BTT MOF. The high ORR catalytic activity can be interpreted by the presence of nitrogen‐rich ligand (tetrazole) and the generation of nascent copper(I) during the reaction. In addition to the excellent activity, Cu‐BTT MOF showed exceptional stability too, which was confirmed through chronoamperometry study, where current was unchanged up to 12 h. Further, the 4‐electrons transfer of ORR kinetics was confirmed by hydrodynamic voltammetry. The oxygen active center namely copper(I) generation during ORR has been understood by the reduction peak in cyclic voltammetry as well in the XPS analysis.