A two‐dimensional layered CdII coordination polymer with a three‐dimensional supramolecular architecture incorporating mixed multidentate N‐ and O‐donor ligands

The combination of N‐heterocyclic and multicarboxylate ligands is a good choice for the construction of metal–organic frameworks. In the title coordination polymer, poly[bis{μ₂‐1‐[(1H‐benzimidazol‐2‐yl)methyl]‐1H‐tetrazole‐κ²N³:N⁴}(μ₄‐butanedioato‐κ⁴O¹:O^1′:O⁴:O^4′)(μ₂‐butanedioato‐κ²O¹:O⁴)dicadmium], [Cd(C₄H₄O₄)(C₉H₈N₆)]_n, each Cd^II ion exhibits an irregular octahedral CdO₄N₂ coordination geometry and is coordinated by four O atoms from three carboxylate groups of three succinate (butanedioate) ligands and two N atoms from two 1‐[(1H‐benzimidazol‐2‐yl)methyl]‐1H‐tetrazole (bimt) ligands. Cd^II ions are connected by two kinds of crystallographically independent succinate ligands to generate a two‐dimensional layered structure with bimt ligands located on each side of the layer. Adjacent layers are further connected by hydrogen bonding, leading to a three‐dimensional supramolecular architecture in the solid state. Thermogravimetric analysis of the title polymer shows that it is stable up to 529 K and then loses weight from 529 to 918 K, corresponding to the decomposition of the bimt ligands and succinate groups. The polymer exhibits a strong fluorescence emission in the solid state at room temperature.     

Xanthone O‐Glycosides from the Roots of Pteris Multifida

Two new xanthone glycosides and six known compounds were isolated from the roots of Pteris multifida. Based on spectroscopic and chemical methods, the structures of the new compounds were elucidated as 1‐hydroxy‐4,7‐dimethoxy‐8‐(3‐methyl‐2‐butenyl)‐6‐O‐α‐L‐rhamnopyranosyl‐(1→2)‐[β‐D‐glucopyranosyl‐(1→3)]‐β‐D‐glucopyranosylxanthone ( 1 ), and 1,3‐dihydroxy‐7‐methoxy‐8‐(3‐methyl‐2‐butenyl)‐6‐O‐α‐L‐rhamnopyranosyl‐(1 →2)‐[β‐D‐glucopyranosyl‐(1→3)]‐β‐D‐glucopyranosylxanthone ( 2 ), respectively.     

Synthesis and Structure/Property Relationships of Regioselective 2‐O‐, 3‐O‐ and 6‐O‐Ethyl Celluloses

Regioselectively ethylated celluloses, 2‐O‐ ( 1 ), 3‐O‐ ( 2 ), and 6‐O‐ethyl‐ ( 3 ) celluloses were synthesized via ring‐opening polymerization of glucopyranose orthopivalate derivatives. The number‐average degrees of polymerization (DP_ns) of compounds 1 and 2 were calculated to be 10.6 and 49.4, respectively. Three kinds of compound 3 with different DP_ns were prepared: DP_ns = 12.9 ( 3‐1 ), 60.3 ( 3‐2 ), and 36.1 ( 3‐3 ). The 2‐O‐, 3‐O‐, and 6‐O‐ethylcelluloses were soluble in water, confirmed by NMR analysis. Furthermore, the 3‐O‐ ( 2 ), and 6‐O‐ethyl‐ ( 3‐2 ) celluloses showed thermo‐responsive aggregation behavior and had a lower critical solution temperature (LCST) at about 40 °C and 70 °C, respectively, based on the results from turbidity tests and DSC measurements. The 6‐O‐ethyl‐cellulose ( 3‐3 ) with DP_n = 36.1 and DP_w = 54.6 showed gelation behavior over approx 70 °C, whereas the 6‐O‐ethyl‐celluloses 3‐1 and 3‐2 with lower and higher molecular weight, such as DP_ns 12.9 and 60.3, did not show gelation behavior at this temperature. It was revealed that the position of ethyl group affected the phase transition temperature. According to our experiments, the 3‐O‐ethyl and 6‐O‐ethyl groups along the cellulose chains caused the thermo‐responsive property of their aqueous solutions. The appropriate DP of the regioselective 6‐O‐ethyl‐cellulose existed for gelation of the aqueous solution.

     

A Resin‐Linker‐Vector Approach to Radiopharmaceuticals Containing 18F: Application in the Synthesis of O‐(2‐[18F]‐Fluoroethyl)‐L‐tyrosine

A Resin‐linker‐vector (RLV) strategy is described for the radiosynthesis of tracer molecules containing the radionuclide ¹⁸F, which releases the labelled vector into solution upon nucleophilic substitution of a polystyrene‐bound arylsulfonate linker with [¹⁸F]‐fluoride ion. Three model linker‐vector molecules 7 a – c containing different alkyl spacer groups were assembled in solution from (4‐chlorosulfonylphenyl)alkanoate esters, exploiting a lipase‐catalysed chemoselective carboxylic ester hydrolysis in the presence of the sulfonate ester as a key step. The linker‐vector systems were attached to aminomethyl polystyrene resin through amide bond formation to give RLVs 8 a – c with acetate, butyrate and hexanoate spacers, which were characterised by using magic‐angle spinning (MAS) NMR spectroscopy. On fluoridolysis, the RLVs 8 a , b containing the longer spacers were shown to be more effective in the release of the fluorinated model vector (4‐fluorobutyl)phenylcarbamic acid tert‐butyl ester ( 9 ) in NMR kinetic studies and gave superior radiochemical yields (RCY≈60 %) of the ¹⁸F‐labelled vector. The approach was applied to the synthesis of the radiopharmaceutical O‐(2‐[¹⁸F]‐fluoroethyl)‐L ‐tyrosine ([¹⁸F]‐FET), delivering protected [¹⁸F]‐FET in >90 % RCY. Acid deprotection gave [¹⁸F]‐FET in an overall RCY of 41 % from the RLV.     

Five Aromatics Bearing a 4‐O‐Methylglucose Unit from Cordyceps cicadae

Five new aromatics bearing a 4‐O‐methylglucose unit, namely 3‐methoxy‐1,4‐hydroquinone 1‐(4′‐O‐methyl‐β‐glucopyranoside) (=4‐hydroxy‐3‐methoxyphenyl 4‐O‐methyl‐β‐glucopyranoside; 1 ), 3‐methoxy‐1,4‐hydroquinone 4‐(4′‐O‐methyl‐β‐glucopyranoside) (=4‐hydroxy‐2‐methoxyphenyl 4‐O‐methyl‐β‐glucopyranoside; 2 ), vanillic acid 4‐(4′‐O‐methyl‐β‐glucopyranoside) (=3‐methoxy‐4‐[(O‐methyl‐β‐glucopyranosyl)oxy]benzoic acid; 3 ), 5‐methoxycinnamic acid 3‐O‐(4′‐O‐methyl‐β‐glucopyranoside) (=(2E)‐3‐{3‐methoxy‐5‐[(4‐O‐methyl‐β‐glucopyranosyl)oxy]phenyl}prop‐2‐enoic acid; 4 ), and naphthalene‐1,8‐diol 1,8‐bis(4′‐O‐methyl‐β‐glucopyranoside) (=naphthalene‐1,8‐diyl bis(4‐O‐methyl‐β‐glucopyranoside; 5 ), were isolated from the cultivated Cordyceps cicadae mycelia, together with thirteen known compounds. Their structures were determined by spectroscopic methods. The absolute configurations of the sugar units were not determined.     

Synthesis and properties of O‐2‐[2‐(2‐methoxyethoxy)ethoxy]acetyl cellulose

In this article, a series of O‐2‐[2‐(2‐methoxyethoxy)ethoxy]acetyl celluloses with different degree of substitution (DS) values was synthesized by a homogeneous reaction of cellulose with 2‐[2‐(2‐methoxyethoxy)ethoxy]acetyl chloride in a 10% (w/w) dimethylacetamide/lithium chloride solution, combined with pyridine as the acid acceptor. The total DS values of the derivatives in anhydroglucose units was determined by ¹H and ¹³C NMR spectra, and ranged from 0.4 to 3.0, depending on the amount of acid chloride in the reaction. The effects of the total DS values and the O‐2‐[2‐(2‐methoxyethoxy)ethoxy]acetyl substituent distribution on the solubility of the derivatives were investigated. The lowest limit of the DS value for water‐soluble O‐2‐[2‐(2‐methoxyethoxy)ethoxy]acetyl cellulose was approximately 0.5, which is lower than that of methylcellulose. The amphiphilic derivatives with higher DS values than 1.7 exhibited a good solubility in both water and organic solvents, such as dimethyl sulfoxide, tetrahydrofuran, and chloroform. Sol‐gel transition in aqueous solution was observed for the amphiphilic derivatives with a higher DS value than 1.7; the precipitation temperature (T_p) decreased as the DS value increased, showing that the derivatives are highly temperature sensitive. The thermal properties of the fully substituted derivative were measured using polarized microscopy, DSC, and X‐ray diffraction; and are discussed in terms of phase transition of the sample derivatives. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 376–382, 2001     

Efficient Synthesis of 1,2,3,4,6‐Penta‐O‐acetyl‐L‐idopyranose

An efficient synthesis of 1,2,3,4,6‐penta‐O‐acetyl‐L ‐idopyranose 2 from 3,5‐O‐benzylidene‐1,2‐O‐isopropylidene‐α‐D ‐glucofuranose in five steps in 45% overall yield via hydroboration of enol ether, hydrolysis of L ‐idofuranosyl sugar and acetolysis of 1,6‐anhydro‐β‐L ‐idopyranose as key steps is described here.     

Stereoregular poly‐O‐methyl [m,n]‐polyurethanes derived from D‐mannitol

Novel linear carbohydrate‐derived [m,n]‐polyurethanes are successfully prepared using D ‐mannitol as renewable and low cost starting material. The key comonomer, 1,6‐di‐O‐phenylcarbonyl‐2,3,4,5‐tetra‐O‐methyl‐D ‐mannitol is polymerized with a diamine synthesized from D ‐mannitol or with alkylenediamines. These polymerization reactions afford, respectively, a [6,6]‐polyurethane entirely based on a carbohydrate derivative or [m,n]‐polyurethanes constituted by a poly‐O‐methyl substituted unit alternating with a polymethylene chain. All these polymers are stereoregular, as result of the C₂ axis of symmetry of mannitol. The optically active polyurethanes are characterized by standard methods (FTIR, RMN, GPC, TGA, and DSC). Thus, GPC analysis reveals weight‐average molecular weights between 18,000 and 25,000 Da. Thermal studies (DSC) indicate that the polymers obtained are amorphous materials with T_g values dependent on the structure and chain length of the diamine constituent. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Observation of Transition‐Metal–Boron Triple Bonds in IrB2O− and ReB2O−

Multiple bonds between boron and transition metals are known in many borylene (:BR) complexes via metal d_π→BR back‐donation, despite the electron deficiency of boron. An electron‐precise metal–boron triple bond was first observed in BiB₂O^? [Bi≡B?B≡O]^? in which both boron atoms can be viewed as sp‐hybridized and the [B?BO]^? fragment is isoelectronic to a carbyne (CR). To search for the first electron‐precise transition‐metal‐boron triple‐bond species, we have produced IrB₂O^? and ReB₂O^? and investigated them by photoelectron spectroscopy and quantum‐chemical calculations. The results allow to elucidate the structures and bonding in the two clusters. We find IrB₂O^? has a closed‐shell bent structure (C_s, ¹A′) with BO^? coordinated to an Ir≡B unit, (^?OB)Ir≡B, whereas ReB₂O^? is linear (C_∞v, ³Σ^?) with an electron‐precise Re≡B triple bond, [Re≡B?B≡O]^?. The results suggest the intriguing possibility of synthesizing compounds with electron‐precise M≡B triple bonds analogous to classical carbyne systems.     

3‐O‐Methylquercetin Glucosides from Ophioglossum pedunculosum and Inhibition of Lipopolysaccharide‐Induced Nitric Oxide Production in RAW 264.7 Macrophages

The three new 3‐O‐methylquercetin glucosides 1 – 3 , together with three known congeners and 3‐O‐methylquercetin, were isolated from the fern Ophioglossum pedunculosum (quercetin=2‐(3,4‐dihydroxyphenyl)‐3,5,7‐trihydroxy‐4H‐1‐benzopyran‐4‐one). The new compounds were identified on the basis of spectroscopic analysis as 5′‐isoprenyl‐3‐O‐methylquercetin 4′,7‐di‐β‐D ‐glucopyranoside ( 1 ), 3‐O‐methylquercetin 4′‐β‐D ‐glucopyranoside 7‐[O‐β‐D ‐glucopyranosyl‐(1→2)‐β‐D ‐glucopyranoside] ( 2 ), and 3‐O‐methylquercetin 7‐[O‐β‐D ‐glucopyranosyl‐(1→2)‐β‐D ‐glucopyranoside] ( 3 ). The effect of the isolated compounds on lipopolysaccharide (LPS)‐induced NO production was evaluated. The inhibitory activity of 3‐O‐methylquercetin derivatives decreased markedly with the increasing number of glucosyl groups in the structures.     

A one‐dimensional zinc(II) coordination polymer based on mixed multidentate N‐ and O‐donor ligands

In the title coordination polymer, catena‐poly[[bis[{1‐[(1H‐benzimidazol‐2‐yl‐κN³)methyl]‐1H‐tetrazole}zinc(II)]‐bis(μ₄‐pentane‐1,5‐dioato‐1:2:1′:2′κ⁴O¹:O^1′:O⁵:O^5′)] methanol disolvate], {[Zn(C₅H₆O₄)(C₉H₈N₆)]·CH₃OH}_n, each Zn^II ion is five‐coordinated by four O atoms from four glutarate ligands and by one N atom from a 1‐[(1H‐benzimidazol‐2‐yl)methyl]‐1H‐tetrazole (bimt) ligand, leading to a slightly distorted square‐pyramidal coordination environment. Two Zn^II ions are linked by four bridging glutarate carboxylate groups to generate a dinuclear [Zn₂(CO₂)₄] paddle‐wheel unit. The dinuclear units are further connected into a one‐dimensional chain via the glutarate ligands. The bimt ligands coordinate to the Zn^II ions in a monodentate mode and are pendant on both sides of the main chain. In the crystal, the chains are linked by O—H...O and N—H...O hydrogen bonds into a two‐dimensional layered structure. Adjacent layers are further packed into a three‐dimensional network through van der Waals forces. A thermogravimetric analysis was carried out and the photoluminescent behaviour of the polymer was investigated.     

Synthesis and Structure of O,O‐Diethyl N‐[(trans‐4‐Aryl‐5,5‐dimethyl‐2‐oxido‐2λ5‐1,3,2‐dioxaphosphorinan‐2‐yl)methyl]phosphoramidothioates

A study on the synthesis of the novel N‐(cyclic phosphonate)‐substituted phosphoramidothioates, i.e., O,O‐diethyl N‐[(trans‐4‐aryl‐5,5‐dimethyl‐2‐oxido‐2λ⁵‐1,3,2‐dioxaphosphorinan‐2‐yl)methyl]phosphoramidothioates 4a – l , from O,O‐diethyl phosphoramidothioate ( 1 ), a benzaldehyde or ketone 2 , and a 1,3,2‐dioxaphosphorinane 2‐oxide 3 was carried out (Scheme 1 and Table 1). Some of their stereoisomers were isolated, and their structure was established. The presence of acetyl chloride was essential for this reaction and accelerated the process of intramolecular dehydration of intermediate 5 forming the corresponding Schiff base 7 (Scheme 2).     

Metal‐Free One‐Pot Synthesis of Benzofurans

Ethyl acetohydroxamate was efficiently arylated with diaryliodonium salts at room temperature under transition‐metal‐free conditions. The obtained O‐arylated products were reacted in situ with ketones under acidic conditions to yield substituted benzo[b]furans through oxime formation, [3,3]‐rearrangement, and cyclization in a fast and operationally simple one‐pot fashion without using excess reagents. Alternatively, the O‐arylated products could be isolated or transformed in situ to aryloxyamines or O‐arylaldoximes. The methodology was applied to the synthesis of Stemofuran A and the formal syntheses of Coumestan, Eupomatenoid 6, and (+)‐machaeriol B.     

A Remarkable Photoreaction of 3‐O‐Benzylhypericin

Irradiation of 3‐O‐benzylhypericin dissolved together with at least 1 equiv. of `proton sponge' in benzene was shown, by means of UV/VIS, ¹H‐NMR, and mass spectrometric measurements, to produce the rearranged blepharismin‐analogous 11‐phenyl‐11H‐benz[4,10]anthra[2,1,9,8‐nopqa]pleiadene system. The latter compound yielded hypericin when treated with light and oxygen in acetone solution, followed by aqueous NH₄Cl. This reaction is considered to proceed via the oxybleopharismin‐analog 3,4‐benzal acetal of hypericin. The implications of the novel phototransformation for synthesis and biosynthesis of the natural products, as well as the structural peculiarities of the photoproducts, are discussed.     

Retention Prediction System of O‐Aryl,O‐(1‐methylthioethylidene‐amino)phosphates on RP‐HPLC

Using factor analysis and stepwise linear regression methods, two parameters – CMR and ECCR – were selected from eight solute‐related structure parameters as the most retention‐influencing parameters. The relationships between the retention data (k ´) and the two structure parameters were established for 13 O‐aryl,O‐(1‐methylthioethylideneamino)phosphate compounds under a wide range of experimental conditions. The retention data (k ´) of another seven compounds with similar structures were predicted using these QSRR equations. Good agreement was obtained between the experimental k ´ values and predicted ones.     

A new one‐dimensional ZnII coordination polymer based on 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole and benzene‐1,2‐dicarboxylate

Multidentate N‐heterocyclic compounds form a variety of metal complexes with many intriguing structures and interesting properties. The title coordination polymer, catena‐poly[zinc(II)‐bis{μ‐2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole}‐κ²N³:N^3′;N^3′:N³‐zinc(II)‐bis(μ‐benzene‐1,2‐dicarboxylato)‐κ²O¹:O²;κ³O¹,O^1′:O²], [Zn₂(C₈H₄O₄)₂(C₁₁H₁₀N₄)₂]_n, has been synthesized by the reaction of Zn(NO₃)₂ with 2‐[(1H‐imidazol‐1‐yl)methyl]‐1H‐benzimidazole (imb) and benzene‐1,2‐dicarboxylic acid (H₂bdic) under hydrothermal conditions. There are two crystallographically distinct imb ligands [imb(A) and imb(B)] in the structure which adopt very similar coordination geometries. The imb(A) ligand bridges two symmetry‐related Zn1 ions, yielding a binuclear [(Zn1)₂{imb(A)}₂] unit, and the imb(B) ligand bridges two symmetry‐related Zn2 ions resulting in a binuclear [(Zn2)₂{imb(B)}₂] unit. The above‐mentioned binuclear units are further connected alternately by pairs of bridging bdic²⁻ ligands, forming an infinite one‐dimensional chain. These one‐dimensional chains are further connected through N—H...O hydrogen bonds, leading to a two‐dimensional layered structure. In addition, the title polymer exhibits good fluorescence properties in the solid state at room temperature.     

Lithium Cyanide Supported by O‐ and N‐Donors

A series of adducts of LiCN, namely [Li(Me₂CO₃)CN], [Li(Et₂CO₃)CN], and [Li(NMP)CN] (NMP = N‐methyl‐2‐pyrrolidone) were prepared by treatment of solvent‐free LiCN with the appropriate donor. The starting material for these approaches, donor‐free LiCN, was quantitatively prepared from Me₃SiCN and Li[Me] in diethyl ether at 0 °C. Alternatively, [Li(NMP)CN] was synthesized by metathesis reaction of LiCl with NaCN in the presence of stoichiometric amounts of NMP. Although [Li(Me₂CO₃)CN] and [Li(Et₂CO₃)CN] are water‐sensitive compounds and decompose at the exposure to air, [Li(NMP)CN] is stable in air, even at elevated temperatures. The thermal stability of [Li(NMP)CN] was proven by differential thermal analysis (DTA). [Li(NMP)CN] shows thermal stability up to temperatures of about 132 °C. To evaluate the cyanation ability the reactions of 1‐bromooctane and 3‐bromocyclohexene with unsupported LiCN, [Li(NMP)CN], and a mixture of NaCN/LiCl/NMP were investigated. We found that [Li(NMP)CN] as well as LiCl/NaCN/NMP are efficient cyanation reagents comparable to the expensive and air‐sensitive, donor‐free LiCN. A product of the chloride‐cyanide‐bromide exchange could be isolated and structurally characterized by X‐ray diffraction.     

One‐ and two‐dimensional CdII coordination polymers constructed from 2‐(2‐methyl‐1H‐benzimidazol‐1‐yl)acetate ligands

The one‐ and two‐dimensional polymorphic cadmium polycarboxylate coordination polymers, catena‐poly[bis[μ₂‐2‐(2‐methyl‐1H‐benzimidazol‐1‐yl)acetato‐κ³N³:O,O′]cadmium(II)], [Cd(C₁₀H₉N₂O₂)₂]_n, and poly[bis[μ₂‐2‐(2‐methyl‐1H‐benzimidazol‐1‐yl)acetato‐κ³N³:O,O′]cadmium(II)], also [Cd(C₁₀H₉N₂O₂)₂]_n, were prepared under solvothermal conditions. In each structure, each Cd^II atom is coordinated by four O atoms and two N atoms from four different ligands. In the former structure, two crystallographically independent Cd^II atoms are located on twofold symmetry axes and doubly bridged in a μ₂‐N:O,O′‐mode by the ligands into correspondingly independent chains that run in the [100] and [010] directions. Chains containing crystallographically related Cd^II atoms are linked into sheets viaπ–π stacking interactions. Sheets containing one of the distinct types of Cd^II atom are stacked perpendicular to [001] and alternate with sheets containing the other type of Cd^II atom. The second complex is a two‐dimensional homometallic Cd^II (4,4) net structure in which each Cd^II atom is singly bridged to four neighbouring Cd^II atoms by four ligands also acting in a μ₂‐N:O,O′‐mode. A square‐grid network results and the three‐dimensional supramolecular framework is completed by π–π stacking interactions between the aromatic ring systems.     

Synthesis of O‐Acyl Isopeptides

O‐Acyl isopeptides, in which the N‐acyl linkage on the hydroxyamino acid residue (e.g., Ser and Thr) is replaced with an O‐acyl linkage, generally possess superior water‐solubility to their corresponding native peptides, as well as other distinct physicochemical properties. In addition, O‐acyl isopeptides can be rapidly converted into their corresponding native peptide under neutral aqueous conditions through an O‐to‐N acyl migration. By exploiting these characteristics, researchers have applied the O‐acyl isopeptide method to various peptide‐synthesis fields, such as the synthesis of aggregative peptides and convergent peptide synthesis. This O‐acyl‐isopeptide approach also serves as a means to control the biological function of the peptide in question. Herein, we report the synthesis of O‐acyl isopeptides and some of their applications.     

Poly[nickel(II)‐di‐μ‐4,4′‐bipyridyl‐κ4N:N′‐μ‐dichromato‐κ2O:O′] and poly[copper(II)‐di‐μ‐4,4'‐bipyridyl‐κ4N:N′‐μ‐dichromato‐κ2O:O′]

The novel title hybrid isomorphous organic–inorganic mixed‐metal dichromates, [Ni(Cr₂O₇)(C₁₀H₈N₂)₂] and [Cu(Cr₂O₇)(C₁₀H₈N₂)₂], have been synthesized. A non‐centrosymmetric three‐dimensional (4,6)‐net is formed from a linear chain of vertex‐linked [Cr₂O]²⁻ and [MN₄O]²⁺ (M = Ni and Cu) units, which in turn are linked by the planar bidentate 4,4′‐­bipyridine ligand through the four remaining vertices of the [MN₄O]²⁺ octahedra. There are two such three‐dimensional nets that interpenetrate with inversion symmetry.