Cyclodextrin‐Based Size‐Complementary [3]Rotaxanes: Selective Synthesis and Specific Dissociation

α‐Cyclodextrin (CD)‐based size‐complementary [3]rotaxanes with alkylene axles were prepared in one‐pot by end‐capping reactions with aryl isocyanates in water. The selective formation of [3]rotaxane with a head‐to‐head regularity was indicated by the X‐ray structural analyses. Thermal degradation of the [3]rotaxanes bearing appropriate end groups proceeded by stepwise dissociation to yield not only the original components but also [2]rotaxanes. From the kinetic profiles of the deslippage, it turned out that the maximum yield of [2]rotaxane was estimated to be 94 %. Thermodynamic studies and NOESY analyses of such rotaxanes revealed that [2]rotaxanes are specially stabilized, and that the dissociation capability of the [3]rotaxanes to the components can be adjusted by controlling the structure of the end groups, direction of the CD groups, and length of the alkylene axle.     

Utilization of a Crown Ether/Amine‐Type Rotaxane as a Probe for the Versatile Detection of Anions and Acids by Thin‐Layer Chromatography

A crown ether/amine‐type [2]rotaxane was synthesized and utilized as a probe for the detection of acids and anions. The addition of acids to the amine‐type [2]rotaxane solution generated corresponding crown ether/ammonium‐type [2]rotaxanes, which were purified by silica gel column chromatography as ammonium salts. The isolated yields of the [2]rotaxanes, possessing a variety of anions, depended on the acidity and polarity of the counter anions. The behaviours of the ammonium‐type [2]rotaxanes on thin‐layer chromatography (TLC) silica gel reflected the properties of the counter anions. The treatment of the amine‐type [2]rotaxane with acids afforded the corresponding ammonium‐type [2]rotaxanes bearing several different anions. The ammonium‐type [2]rotaxanes behaved similarly to the purified [2]rotaxanes on the TLC silica gel. Furthermore, we succeeded in the analysis of anions using mixtures of the amine‐type [2]rotaxane and salts in an appropriate solvent. We demonstrated the detection of anions by the combination of TLC and the utilization of the [2]rotaxane probe.     

A Strategy Utilizing a Recyclable Macrocycle Transporter for the Efficient Synthesis of a Triazolium‐Based [2]Rotaxane

A general synthesis of triazolium‐containing [2]rotaxanes, which could not be accessed by other methods, is reported. It is based on a sequential strategy starting from a well‐designed macrocycle transporter which contains a template for dibenzo‐24‐crown‐8 and a N‐hydroxysuccinimide (NHS) moiety. The sequence is: 1) synthesis by slippage of a [2]rotaxane building‐block; 2) its elongation at its NHS end; 3) the delivery of the macrocycle to the elongated part of the axle by an induced translational motion; 4) the contraction process to yield the targeted [2]rotaxane and recycle the initial transporter.     

Facile synthesis of rotaxanes through condensation reactions of DCC-[2]rotaxanes

[reaction: see text] In this Letter, we present an easy method for the synthesis of rotaxanes using a novel DCC-[2]rotaxane. The DCC-[2]rotaxane is composed of dibenzo-24-crown-8 ether, an amino acid tether, and di-tert-butyl phenyl rings as blocking groups. It is relatively stable and can be purified by column chromatography. A series of model rotaxanes were obtained in good yields by condensing the DCC-[2]rotaxanes with N-(2-aminoethyl)-3,5-di-tert-butylbenzylamide in acetonitrile and chloroform.     

Structural Analysis and Inclusion Mechanism of Native and Permethylated α‐Cyclodextrin‐Based Rotaxanes Containing Alkylene Axles

Native α‐cyclodextrin‐ (α‐CD) and permethylated α‐CD (PMeCD)‐based rotaxanes with various short alkylene chains as axles can be synthesized through a urea end‐capping method. Native α‐CD tends to form [3]‐ or [5]pseudorotaxanes and not [2]‐ or [4]pseudorotaxanes, which indicates that the coupled CDs act as a single fragment. End‐capping reactions of the pseudorotaxanes with C18 and C24 axle lengths do not occur because the axle termini are covered by the densely stacked CDs. The number of PMeCDs on the pseudorotaxane is flexible and mainly depends on the axle length. Peracetylated α‐CD (PAcCD)‐based rotaxanes are synthesized through O‐acetylation of the α‐CD‐based rotaxanes without any decomposition of the rotaxanated structures. The structures of PMeCD‐based [3]‐ and [4]rotaxanes, and the molecular dynamics calculations on [3]pseudorotaxanes, indicate that the tail face of PMeCDs is regularly directed toward the axle termini. On the basis of the results obtained, it can be concluded that the directions and numbers of CDs in rotaxanes containing short alkylene chains depend on 1) the interactions between CDs, 2) the length of the alkylene axle, and 3) the interactions between the axle end and tail face of the CD.     

The Effect of Incorporating Fréchet Dendrons into Rotaxanes and Molecular Shuttles Containing the 1,2‐Bis(pyridinium)ethane⊂[24]Crown‐8 Templating Motif

Fréchet‐type dendrons (G0–G3) were added as both axle stoppering units and cyclic wheel appendages in a series of [2]rotaxanes, [3]rotaxanes, and molecular shuttles that employ 1,2‐bis(pyridinium)ethane axles and 24‐membered crown ethers wheels. The addition of dendrimer wedges as stoppering units dramatically increased the solubility of simple [2]rotaxanes in nonpolar solvents. The X‐ray structure of a G1‐stoppered [2]rotaxane shows how the dendritic units affect the structure of the interlocked components. Increased solubility allows observation of how the interaction of dendritic units on separate components in interlocked molecules influences switching properties and molecular size. In a series of [2]rotaxane molecular shuttles incorporating two recognition sites, it was demonstrated that an increase in generation on either the stoppering unit or cyclic wheel could influence both the rate of shuttling and the site preference of the wheel on the axle.     

Construction of Crown Ether‐Stoppering [3]Rotaxanes Based on N‐Hetero Crown Ether Host

Crown ether usually plays the role of macrocyclic host in supramolecular chemistry, but here the crown ether is also utilized as the stoppers in rotaxanes. In this work, we designed and synthesized two [3]rotaxanes containing four crown ether components by using an approach of template‐directed clipping reaction, of which, two crown ether components were employed as the macrocyclic hosts to assemble the mechanically interlocked framework while another two crown ether units located on the two ends of ammonium template acting as the stoppering groups of rotaxanes. Their self‐assembling process was monitored by the ¹H NMR and one of the single crystal structures of [3]rotaxane was obtained.     

Synthesis of a Structure‐Definite α‐Cyclodextrin‐Based Macromolecular [3]Rotaxane Using a Size‐Complementary Method

The challenging synthesis of an α‐cyclodextrin (CD)‐based macromolecular rotaxane with definite structure was fulfilled using a size‐complementary method. A new peracetylated (PAc) α‐CD‐based size‐complementary [3]rotaxane was prepared and its thermal dissociation kinetics studied. The de‐slippage mechanism was found to be different from that of the native α‐CD‐based system. PAcα‐CD‐based size‐complementary [3]rotaxanes were employed as initiators for a ring‐opening polymerization of ?‐caprolactone to obtain the macromolecular [3]rotaxanes. Detailed investigation of component dissociation showed the highly movable character of the wheel on the polymer main chain. A general method for controlling the movement of wheels in rotaxane frameworks, even in polymer systems, was established. This will enable the development of new supramolecular architectures and molecular machines.     

Using “Threading Followed by Shrinking” to Synthesize Highly Stable Dialkylammonium‐Ion‐Based Rotaxanes

Herein, we report a “threading followed by shrinking” approach for the synthesis of rotaxanes by using an “oxygen‐deficient” macrocycle that contained two arylmethyl sulfone units and the dumbbell‐shaped salt bis(3,5‐dimethylbenzyl)ammonium tetrakis(3,5‐trifluoromethylphenyl)borate as the host and guest components, respectively. The extrusion of SO₂ from both of the arylmethyl sulfone units of the macrocyclic component in the corresponding [2]pseudorotaxane resulted in a [2]rotaxane that was sufficiently stable to maintain its molecular integrity in CD₃SOCD₃ at 393 K for at least 5 h.     

Five‐State Molecular Shuttling of a Pair of [2]Rotaxanes: Distinct Outputs in Response to Acid and Base Stimuli

In this study we synthesized two acid‐/base‐controllable [2]rotaxanes featuring aminodiazobenzene and aminocoumarin units, respectively, as chromophores and dibenzo[24]crown‐8 and dibenzo[25]crown‐8 units, respectively, as their macrocyclic components. Each [2]rotaxane contained N‐alkylarylamine (ammonium) and N,N‐dialkylamine (ammonium) centers as binding sites for their crown ether components. The absorption patterns of the chromophores were dependent on the position of the encircling macrocyclic component and the degree of protonation, with three distinct states (under acidic, neutral, and basic conditions) evident for each [2]rotaxane. The mixed [2]rotaxane system displayed stepwise and independent molecular shuttling behavior based on the degree of protonation of the amino groups in response to both the amount and strength of added acids or bases; as such, the system provided five different absorption signals as outputs that could be read using UV/Vis spectroscopy.     

Synthesis of [2]- and [3]rotaxanes through Sonogashira coupling

The synthesis of new [2]- and [3]rotaxanes through Sonogashira coupling has been accomplished in the aim to built oligo(phenyleneethynylene) (OPE) encircled by crown ethers. Optimization of the Sonogashira coupling for the formation of the [2]rotaxane (capping reaction) is presented and the best method has been applied for the synthesis of the longer [3]rotaxane.     

Nitrite‐Templated Synthesis of Lanthanide‐Containing [2]Rotaxanes for Anion Sensing

The first anion‐templated synthesis of a lanthanide‐containing interlocked molecule is demonstrated by utilizing a nitrite anion to template initial pseudorotaxane formation. Subsequent stoppering of the interpenetrated assembly allows for the preparation of a lanthanide‐functionalized [2]rotaxane in high yield. Following removal of the nitrite anion template, the europium [2]rotaxane host is demonstrated to recognize and sense fluoride selectively.     

High‐Yield Diastereoselective Synthesis of Planar Chiral [2]‐ and [3]Rotaxanes Constructed from per‐Ethylated Pillar[5]arene and Pyridinium Derivatives

Planar chiral [2]‐ and [3]rotaxanes constructed from pillar[5]arenes as wheels and pyridinium derivatives as axles were obtained in high yield using click reactions. The process of rotaxane formation was diastereoselective; the obtained [2]rotaxane was a racemic mixture consisting of (pS, pS, pS, pS, pS) and (pR, pR, pR, pR, pR) forms of the per‐ethylated pillar[5]arene ( C2 ) wheel, and other possible types of the [2]rotaxane did not form. Isolation of the enantiopure [2]rotaxanes with one axle through (pS, pS, pS, pS, pS)‐ C2 or (pR, pR, pR, pR, pR)‐ C2 wheels was accomplished. Furthermore, pillar[5]arene‐based [3]rotaxane was successfully synthesized by attachment of two pseudo [2]rotaxanes onto a bifunctional linker. [3]Rotaxane formed in a 1:2:1 mixture with one axle threaded through two (pS, pS, pS, pS, pS)‐ C2 , one (pS, pS, pS, pS, pS)‐ C2 and one (pR, pR, pR, pR, pR)‐ C2 (meso form), or two (pR, pR, pR, pR, pR)‐ C2 wheels. The [3]rotaxane enantiomers and the meso form were successfully isolated using appropriate chiral HPLC column chromatography. The procedure developed in this study is the starting point for the creation of pillar[5]arene‐based interlocked molecules.     

Chiral [1]Rotaxanes: X‐Ray Structures and Chiroptical Properties

New chiral [1]rotaxanes with aromatic bridges were prepared in yields up to 72% starting from a [2]rotaxane with sulfonamide groups in wheel and axle. The X‐ray structures of the parent [2]rotaxane 1 and of the three [1]rotaxanes 3e , g , h were solved which show networks of H‐bonds between wheel and axle. The separation of the racemic mixtures of four of the [1]rotaxanes, i.e., of 3a , b , d , e , was possible with HPLC on Chiralcel OD. The aromatic chromophores in the bridges lead to a considerable enhancement of the intensities of the molar CD as compared to the analogues with aliphatic bridges. In one case ( 3d ), the Cotton effects are as strong as those usually found in helicenes.     

Olefin Cyclopropanation by Radical Carbene Transfer Reactions Promoted by Cobalt(II)/Porphyrinates: Active‐Metal‐Template Synthesis of [2]Rotaxanes

A Co^II/porphyrinate‐based macrocycle in the presence of a 3,5‐diphenylpyridine axial ligand functions as an endotopic ligand to direct the assembly of [2]rotaxanes from diazo and styrene half‐threads, by radical‐carbene‐transfer reactions, in excellent 95 % yield. The method reported herein applies the active‐metal‐template strategy to include radical‐type activation of ligands by the metal‐template ion during the organometallic process which ultimately yields the mechanical bond. A careful quantitative analysis of the product distribution afforded from the rotaxane self‐assembly reaction shows that the Co^II/porphyrinate subunit is still active after formation of the mechanical bond and, upon coordination of an additional diazo half‐thread derivative, promotes a novel intercomponent C?H insertion reaction to yield a new rotaxane‐like species. This unexpected intercomponent C?H insertion illustrates the distinct reactivity brought to the Co^II/porphyrinate catalyst by the mechanical bond.     

Anion-templated assembly of [2]rotaxanes

Anion templation is used to develop a general method for rotaxane synthesis. The anion-templated synthesis of three new [2]rotaxanes containing positively charged pyridinium axles and neutral isophthalamide macrocyclic components is described. The incorporation of electron withdrawing substituents, such as the nitro group, into the 5-position of an isophthalamide bis-vinyl acyclic precursor results in a significant improvement in [2]rotaxane assembly yields. Rotaxane anion binding strengths are also enhanced whilst the rotaxane's unique interlocked binding domain ensures selectivity for chloride--the templating anion--is maintained.     

Synthesis of rotaxanes consisting of crown ether wheel and sec-ammonium axle under basic condition

A novel synthetic method of [2]rotaxane by end capping of pseudorotaxane via conjugate addition of thiol to N-substituted maleimide CC bond under basic condition was developed. Several [2]rotaxanes were obtained in good yields.     

Palladium‐Templated Subcomponent Self‐Assembly of Macrocycles,Catenanes, and Rotaxanes

The reaction of 2,6‐diformylpyridine with diverse amines and Pd^II ions gave rise to a variety of metallosupramolecular species, in which the Pd^II ion is observed to template a tridentate bis(imino)pyridine ligand. These species included a mononuclear complex as well as [2+2] and [3+3] macrocycles. The addition of pyridine‐containing macrocyclic capping ligands allows for topological complexity to arise, thereby enabling the straightforward preparation of structures that include a [2]catenane, a [2]rotaxane, and a doubly threaded [3]rotaxane.     

Palladium‐Templated Subcomponent Self‐Assembly of Macrocycles,Catenanes, and Rotaxanes

The reaction of 2,6‐diformylpyridine with diverse amines and Pd^II ions gave rise to a variety of metallosupramolecular species, in which the Pd^II ion is observed to template a tridentate bis(imino)pyridine ligand. These species included a mononuclear complex as well as [2+2] and [3+3] macrocycles. The addition of pyridine‐containing macrocyclic capping ligands allows for topological complexity to arise, thereby enabling the straightforward preparation of structures that include a [2]catenane, a [2]rotaxane, and a doubly threaded [3]rotaxane.     

Organometallic Rotaxanes with a Triazole Group in the Axle Component and Their Behavior as Ligands of PtII Complexes

Two ferrocenylmethyl ammonium salts were used as axle components of pseudorotaxanes with dibenzo[24]crown‐8. The pseudorotaxane with an alkyne terminal group in the axle component underwent a Cu‐catalyzed Huisgen coupling reaction (click reaction) with an alkyl azide to afford cationic [2]rotaxanes with a triazole group in the axle molecule. The rotaxane reacted with Ac₂O to produce neutral rotaxanes with an amide group in the axle component. Both cationic and neutral rotaxanes were treated with K[PtCl₃(CH₂?CH₂)] to form the Pt^II‐containing rotaxanes.