利用石英晶体的线性电光和电致旋光强度调制

提出并实验研究了利用石英晶体自身特性产生光学偏置的线性电光调制器。利用某些电光晶体的自然旋光性和自然双折射,并合理设计晶体尺寸及其晶轴与光传播方向之间的夹角,可以提供所需要的光学偏置以实现大动态范围的线性电光调制。对于兼有电光和电致旋光效应的晶体,例如石英晶体,应考虑综合利用这两种效应对电光调制的贡献。实验研究了一块石英晶体的电光强度调制特性,在27V～4.5kV工频调制电压范围内,调制输出信号与调制电压之间的线性相关系数大于0.9999。     

280mm×280mm口径单脉冲过程电光开关

用于高功率惯性约束聚变(ICF)激光驱动器的大口径电光开关均采用等离子体电极泡克耳斯盒。与传统的等离子体电极电光开关原理不同,单脉冲过程驱动电光开关没有独立的大电流等离子体发生单元,而只是通过具有较高幅值的正负开关脉冲完成对大口径电光开关的驱动。介绍单脉冲过程驱动等离子体电极泡克耳斯盒电光开关的设计,并建立280 mm×280 mm口径电光开关实验平台,利用连续激光器测试了电光开关特性,实验测得该电光开关中心处开关效率为99.3%,开关上升时间为90 ns。     

TN型液晶电光调制实验研究

根据TN型液晶的工作原理和光学特性,提出了一种方波电压信号驱动的液晶电光调制实验方法,在此基础上,利用液晶电光效应实验仪,测量了扭曲向列相型液晶在不同频率、不同波形电压激励下的电光曲线和阈值电压,分析了激励电压频率、波形对电光曲线的阈值电压和陡度的影响.对加载于TN型液晶上的3 000 Hz方波实现了正弦波幅度调制,并分析了电光调制结果.此种电光调制方法可用于液晶材料对电信号响应特性的直观显示.     

硅酸铋晶体等密度透光特性

对硅酸铋(简称BSO)晶体的电光非线性特性进行的实验中发现,当施加外电压于BSO晶体时,晶体呈现出某种光学等密度透光特性。本文基于双折射晶体的电光非线性,对此现象从机理上进行了分析,给出实验测量曲线,以及几个实例的实验结果。 关键词：     

基于光纤环形镜的偏振无关的掺镧锆钛酸铅电光开关

利用掺镧锆钛酸铅(PLZT)陶瓷二次电光效应结合光纤环形镜结构的优势构成偏振无关高速电光开关。采用琼斯矩阵方法分析了光纤环形镜的输出特性,给出了开关消光比同器件结构参量之间的关系。测量掺镧锆钛酸铅电光开关具有输入偏振无关特性,光开关消光比达到25 dB,响应时间小于3μs。此外利用此开关装置测量获得了实验用掺镧锆钛酸铅陶瓷的克尔系数为κ~1.1×10-16m2/V2。理论分析和实验结果表明,利用环形镜结构稳定优势和掺镧锆钛酸铅优良的电光特性结合设计的高速光开关具有良好的应前景。本工作对掺镧锆钛酸铅电光材料的应用推广和高速光开光研究提供了有益的理论和实验参考。     

等离子体电极电光开关特性参数测量

 建造一套电光开关参数测量系统,具备时间分辨、空间分辨及全口径平均测量能力。介绍了240mm×240mm等离子体电极普克尔盒电光开关特性参数及测量光路,并给出了实验测量结果。     

液晶物性实验介绍

介绍了在大学物理实验教学中新开设的研究液晶的旋光特性和电光效应(光开关、液晶光栅)的实验,以及对实验结果的分析．     

一次曝光法制备二维电调谐聚合物液晶光栅

采用四光束一次曝光法制备了二维电调谐聚合物分散液晶光栅,实验表明该方法制备的二维光栅具有非常好的电光特性,其衍射图样为空间点阵且衍射效率可以通过电场进行调节;偏光显微镜和原子力显微镜表明光栅中的液晶和聚合物在二维空间上呈周期性分布.同时利用二维衍射模型对二维光栅的电光特性进行了理论模拟,得到理论模拟的结果与实验结果相吻合.     

一次曝光法制备二维电调谐聚合物液晶光栅

采用四光束一次曝光法制备了二维电调谐聚合物分散液晶光栅,实验表明该方法制备的二维光栅具有非常好的电光特性,其衍射图样为空间点阵且衍射效率可以通过电场进行调节|偏光显微镜和原子力显微镜表明光栅中的液晶和聚合物在二维空间上呈周期性分布.同时利用二维衍射模型对二维光栅的电光特性进行了理论模拟,得到理论模拟的结果与实验结果相吻合.     

阳极化膜用于等离子体电光开关放电腔绝缘模拟研究

 壳体金属化是等离子体电光开关实现阵列结构的必须,放电腔的绝缘是壳体金属化的技术关键和难点。分析了等离子体电极电光开关放电腔的主要放电过程和特性;介绍了几种厚度阳极化膜层的击穿电压和用于电光开关放电腔绝缘模拟实验的情况和结果。初步分析了影响阳极化膜用于等离子体电极电光开关放电腔绝缘的主要因素,实验表明60μm厚度的阳极化膜可以满足电光开关放电腔绝缘的实用要求。     

A study on the best irradiation dose of X-ray for Hep-2 cells by Fourier transform infrared spectroscopy

Fourier transform infrared spectroscopy (FTIR) was employed to study the human epidermis larynx carcinoma cell lines (Hep-2) which were irradiated by different doses of X-ray.The results show that (1) the irradiation of X-ray damages the structure of the CH3 groups of the thymine in DNA,which restrains the reproduction of Hep-2 cells effectively,(2) the 8 Gy dose of X-ray irradiation changes the framework and the relative contents of some proteins,lipids and the nucleic acid molecules intercellular in the greatest degree,and (3) the 8 Gy dose of X-ray irradiation is the best irradiation dose for lowering the degree of the cancerization of Hep-2 cells according to the criteria for the degree of the cancerization reported recently.Meanwhile,the apoptosis of these cells were detected by using flow cytometry (FCM) primarily.It shows that the apoptotic ratio of the Hep-2 cells depends on the irradiation dose to some extent,but is not linearly.And the apoptotic ratio of the 12 Gy dose group is the maximum (20.36%),but the apoptotic ratios of the 2 to 8 Gy dose groups change little.     

Modification to first-order Born approximation for improved prediction of scattered sound from weakly scattering objects

When deriving the Fourier diffraction theorem based on the first-order Born approximation,the difference between wave number of the scattering object and that of the surrounding medium is ignored,causing substantial errors in sound scattering prediction.This paper modifies the Born approximation by taking into account the amplitude and phase changes between the scattering object and the water due to the wave number difference.By changing the radius and center position of the sampling circle in the Fourier domain,accuracy of the predicted sound scattering is improved.With the modified Born approximation,the computed far-field directional pattern of the scattered sound from a circular cylinder is in good agreement with the rigorous solution.Numerical calculations for several objects with different shapes are used to show applicability and effectiveness of the proposed method.     

Study on the radiation problem caused by electron beam loss in accelerator tubes

The beam dynamic code PARMELA was used to simulate the transportation process of accelerating electrons in S-band SW linacs with different energies of 2.5, 6 and 20 MeV. The results indicated that in the ideal condition, the percentage of electron beam loss was 50% in accelerator tubes. Also we calculated the spectrum, the location and angular distribution of the lost electrons. Calculation performed by Monte Carlo code MCNP demonstrated that the radiation distribution of lost electrons was nearly uniform along the tube axis, the angular distributions of the radiation dose rates of the three tubes were similar, and the highest leaking dose was at the angle of 160° with respect to the axis. The lower the energy of the accelerator, the higher the radiation relative leakage. For the 2.5 MeV accelerator, the maximum dose rate reached 5% of the main dose and the one on the head of the electron gun was 1%, both of which did not meet the eligible protection requirement for accelerators. We adopted different shielding designs for different accelerators. The simulated result showed that the shielded radiation leaking dose rates fulfilled the requirement.     

Fiber Modal Index Measurements Based on Fiber Gratings

A novel method based on fiber gratings for measuring the effective indices of fiber modes is proposed. The effective index difference between the core mode and a cladding mode was obtained by analyzing the interference fringe of a pair of cascaded long-period fiber gratings. In order to extract the core mode index from the measured index difference, an index matching oil immersion method is proposed. By analyzing the interaction between the cladding mode and the oil applied on the cladding surface, the mode order and the effective index of the involved cladding mode might be calculated. Experimental results about the interference fringe shifts induced by the oil index and the oil-applied length are also presented.     

Factors affecting the spectrum of an electromagnetic light wave on scattering from a semisoft boundary medium

The spectrum of an electromagnetic light wave on scattering from a semisoft boundary medium is discussed within the accuracy of the first-order Born approximation. It is shown that spectral shifts and spectral switches are affected both by the polarization of the incident light wave and by the characters of the scat-tering medium. Moreover, numerical results show that the direction at which the spectral switch occurs is governed by the characters of the scattering medium, whereas the magnitude of the spectral switch is affected by the polarization of the incident light wave.     

Temperature Sensitivity Control and Mechanical Stress Effect of Boron-Doped Long-Period Fiber Gratings

We will present in this work the quantitative analysis of the relationship between the doping concentrations of GeO 2 and B 2 O 3 in the core and cladding regions and the temperature sensitivity of the resonance wavelength shift in long-period fiber gratings (LPFGs). Based on this analysis, the temperature sensitivity was suppressed and enhanced to 0.002 nm/°C and 0.28 nm/°C, respectively. We will also discuss the effect of the residual mechanical stress on the optical and mechanical properties of LPFGs. In particular, we will present the measurement results of the dependence of the refractive index change and mechanical strength on the residual mechanical stress in the boron-doped fibers with depressed clad and matched clad.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Time domain finite volume method for the transient response and natural characteristics of structural-acoustic coupling in an enclosed cavity

A time domain finite volume method（TDFVM）based on wave theory is developed to analyze the transient response and natural characteristics of structural-acoustic coupling problems in an enclosed cavity.In the present method,the elastic dynamic equations and acoustic equation in heterogeneous medium are solved in solid domains and fluid domains respectively.The structural-acoustic coupling is implemented according to the continuity condition of the particle velocity along the normal direction and the normal traction equilibrium condition on the interface.Several numerical examples are presented to validate the effectiveness and accuracy of the present TDFVM.Then the effects of water depth on the acoustic and vibration characteristics and the natural characteristics of a structural-acoustic coupling system are analyzed.The numerical results show that the increase of water depth leads to a stronger coupling between the water and structure and the decrease of natural frequencies of coupling system,The computational cost and memory of this method are small and it can be applicable to structural-acoustic coupling problems in the heterogeneous fluid.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.