含偶氮苯生色团的聚醚的合成与热致液晶性质

β－氯乙基缩水甘油醚（ＧＣＥ）和ＧＣＥ／羟丁基乙烯基醚（ＨＢＶＥ）分别通过阳离子聚合、光引发共聚合,获得两种聚醚,然后再分别与４－硝基－４’－羟基偶氦苯（ＮＨＡ）反应,制备了两种侧链含偶氦苯生色团的液晶聚合物（ＰＡＥＧ、ＰＡＶ）。用ＦＴＩＲ、＾１Ｈ－ＮＭＲ和ＥＡ对其化学结构及生色团含量进行了表征,以ＰＯＭ,ＤＳＣ、ＴＧＡ和ＷＡＸＤ对聚合物介晶相转变温度、织构、热稳定性及相行为进行了研究。结果表明,     

聚丙烯酸酯型高分子侧链液晶的合成及其对聚乙烯成核结晶行为的影响

基于聚烯烃用成核剂的结构特征设计合成了两种极性基团和非极性基团交替排列的乙烯基单体,并利用自由基引发聚合,制备出相应的侧链型液晶聚合物.采用元素分析、红外光谱和核磁共振氢谱对所合成单体和聚合物的结构进行了确认.并采用热失重(TGA)和差示扫描量热仪(DSC)研究了聚合物的热稳定性和相转变温度.结果表明,所合成聚合物的起始热分解温度均在337℃以上,具有优异的热稳定性;液晶相变温度区间可达186 K,具有较宽的液晶态温度范围.热台偏光显微镜(HS-POM)研究结果表明,聚合物均呈现出纹影织构,证明所合成的聚合物均为热致向列型侧链液晶高分子.采用DSC和HS-POM研究了所合成的侧链液晶聚合物对高密度聚乙烯(HDPE)异相成核结晶行为的影响.结果表明,侧链型液晶聚合物在提高HDPE结晶温度、结晶度以及降低HDPE晶粒的尺寸及分布方面均有优异的效果,是一类HDPE有效的成核剂.     

共聚型环氧树脂基高分子染料的制备和表征

合成了环氧基先驱聚合物,采用后重氮偶合反应经一步法在聚合物中同时引入两种不同颜色的偶氮生色团.通过调配重氮盐的比例制备了一系列具有不同颜色及玻璃化转变温度的高分子染料.利用氢核磁共振谱图(1H-NMR)计算了聚合物上两种偶氮生色团的官能化度,采用示差扫描量热仪(DSC)测量了不同高分子染料的玻璃化转变温度(Tg)和分解温度(Td),用分光光度仪对这些聚合物的颜色进行了表征,并在国际照明委员会(CIE)颁布的CIE 1931 Yxy色度图上标出了相应的位置.结果表明:这些聚合物具有良好的溶解性、成膜性强、附着力强,可以应用于彩色滤光片等.     

非线性光学活性的侧链型聚丙二酸酯液晶的合成和性质

通过熔融缩聚法合成了含非线性光学活性硝基偶氮苯液晶基元的聚丙二酸酯侧链液晶聚合物 ,采用FTIR、NMR对其结构进行了表征 ,DSC确定其液晶转变温度 ,并用变温WAXD及偏光显微镜 (POM )研究其液晶性质 ,该聚合物为近晶型液晶聚合物 ,POM观察到典型焦锥织构 ,近晶相WAXD有对应层间距为2 74nm和 1 35nm的两个衍射峰 .聚合物旋涂膜经电晕极化 ,紫外光谱测试求得其取向序参数 =0 33 .     

甲壳型液晶高分子的化学结构及其与性能间关系的研究

设计并合成了7种新型甲壳型液晶高分子,研究了液晶基元的化学结构和立体效应对单体及其聚合物液晶性的影响.发现在液晶基元的末端引入极性或可极化的原子基团提高了单体的熔点和液晶相的热稳定性;液晶基元的长径比越大,单体的熔点和清亮点越高;聚合使单体的液晶稳定性增加、液晶相温度范围变宽;侧链液晶基元的极性、刚性和空阻越大,聚合物的玻璃化温度越高;酰胺基团无论是在分子的末端还是在连接部位,都使单体的熔点和聚合物的玻璃化温度提高,但在分子末端时液晶相较稳定,作为中心桥键时不利于液晶相的稳定形成.     

含偶氮咔唑生色团氧化乙烯功能单体的合成及其聚合反应研究

设计并合成了含偶氮苯生色团的环氧类功能单体和仅含咔唑环的单体,并以一定比例通过阳离子开环聚合合成了三个新的非共轭主链具有光折变生色团的聚合物,并用GPC、DSC、FT-IR、TG和UV-Vis等手段对所得聚合物进行了表征,考察了共聚单体配比对聚合物玻璃化转变温度的影响。UV-Vis谱图说明聚合物的最大吸收波长取决于生色团的种类。DSC结果显示,通过改变两个单体的配比可以有效调节共聚产物的玻璃化转变温度。TG结果显示,聚合物具有好的热稳定性,325℃左右开始分解。     

燕尾型手性侧链液晶聚合物的合成与性能

合成了燕尾型液晶单体4-(3,5-二乙酰氧基)苯甲酰氧基-4′-对烯丙氧基苯甲酰氧基联苯(M),手性液晶单体4-烯丙氧基苯甲酰氧基异丙酰氧基胆甾基酯(N),将它们与聚甲基含氢硅氧烷接枝共聚,得到燕尾型手性侧链液晶聚合物PW1~PW6。通过红外、核磁共振、差示扫描量热、偏光显微镜和热重分析等手段对所合成单体及聚合物的结构、液晶相行为及热稳定性进行了研究。结果表明,PW1~PW6为互变胆甾相热致液晶,升降温均呈现彩色Grandjean织构,液晶区间宽泛在102~160℃之间,5%热失重温度达303℃以上,热稳定性良好。     

含对甲氧基苯氧羰基偶氮苯基团的侧链液晶高分子的合成与表征

报道了新型的含对甲氧基苯氧羰基偶氮苯基团的甲基丙烯酸酯单体与含对甲氧基苯氧羰基苯基团的甲基丙烯酸酯单体的合成及其自由基共聚合．利用１Ｈ ＮＭＲ、ＩＲ、ＵＶ Ｖｉｓ、元素分析、ＧＰＣ、ＴＧ ＤＴＡ、ＰＯＭ及Ｘ 射线衍射等手段对偶氮单体及聚合物的结构与性能进行了表征,证明两种单体的共聚合产物为无规共聚物,而且各聚合物均具有较好的热稳定性．研究结果还表明,偶氮单体与聚合物在升温过程中均显示出向列相液晶织构,且聚合物的液晶相范围随偶氮含量的增加而变宽．     

环氧树脂/液晶聚合物体系的形态、力学性能和热稳定性

合成了一种端基含有活性基团的热致性液晶聚合物 (LCPU) ,用其改性环氧树脂CYD 12 8 4 ,4′ 二氨基二苯砜 (DDS)固化体系 ,对改性体系的冲击性能、拉伸性能、弯曲性能、弹性模量、断裂伸长率、玻璃化转变温度Tg、热失重温度TG与LCPU含量的关系进行了探讨 ,对不同种类液晶化合物改性CYD 12 8 DDS体系效果进行了比较 ,用扫描电镜 (SEM)研究了材料断面的形态结构 .结果表明 ,LCPU的加入可以使固化物的力学性能和热稳定性提高 ,改性后材料断裂面的形态逐渐呈现韧性断裂特征     

侧链胆甾液晶聚合物及弹性体的液晶性能研究

把胆甾液晶单体 4 烯丙氧基苯甲酸胆甾醇酯 (Mch)分别和向列液晶单体 4 烯丙氧基苯甲酰氧基 4′ 甲氧基苯 (Mn) ,向列液晶交联剂 2 叔丁基对苯二酚双 [4 (6 丙烯酰氧基己氧基 )苯甲酸酯 ](Mnc)接枝到聚硅氧烷链上 ,得到系列侧链液晶聚合物Pn 系列和液晶弹性体Pe 系列 .通过热分析、偏光显微分析和X 射线分析等手段分别研究了向列液晶单体和向列液晶交联剂对含同一胆甾液晶基元聚合物的影响 .结果表明 ,向列液晶单体的摩尔百分比在 80 %以下 ,液晶聚合物Pn 系列为胆甾型液晶 ,在研究的范围内 ,液晶弹性体Pe 系列也为胆甾型液晶 ,Pn 系列和Pe 系列都具有较宽的液晶相范围 ,热分解温度均在 2 80℃以上 .     

Synthesis and characterization of novel ferrocenyl glycidyl ether polymer,ferrocenyl poly (epichlorohydrin) and ferrocenyl poly (glycidyl azide)

Poly (ferrocenyl glycidyl ether) was synthesized by polymerization of 2-[(4-ferrocenylbutoxy)methyl]oxirane (FcEpo) using toluene solution of methylaluminoxane as the catalyst. Copolymerization of 2-[(4-ferrocenylbutoxy)methyl]oxirane with epichlorohydrin was used for the synthesis of another ferrocenyl based poly (epichlorohydrin). Ferrocenyl based poly (glycidyl azide), GAP, was synthesized by treatment of sodium azide with this copolymer in DMF as solvent at room temperature. The synthesized ferrocenyl based polymers were characterized by FT-IR, ¹HNMR, UV–Vis, TGA, DSC and GPC analysis. The UV–Vis spectra of synthesized polymers show the absorption band of ferrocene moiety at about 450 nm. The TGA and DSC analysis show that poly (ferrocenyl glycidyl ether) has good thermal stability. The TGA analysis shows that the copolymerization of 2-[(4-ferrocenylbutoxy)methyl]oxirane with epichlorohydrin improved the thermal stability of the copolymer. The GPC analysis of poly (ferrocenyl glycidyl ether), ferrocenyl based poly (epichlorohydrin) and Ferrocenyl based poly (glycidyl azide) show the PDI between 1.14–1.17. The electrochemical behavior of synthesized polymers was investigated by cyclic voltammetry (CV) measurements. The CV curves of synthesized polymers show good electrochemical performance and there is one redox system with the single-electron reversible reaction that associated with ferrocene moiety in polymers structure. The anodic and cathodic peak currents increased with scan rate confirmed redox reactions in the system are kinetically fast diffusion-controlled reactions.     

聚(β-氯乙基缩水甘油醚)的合成及其酯化反应动力学

本文合成了β-氯乙基缩水甘油醚及其聚合物。结果表明, AlEt3-0.5H2O体系是β-氯乙基缩水甘油醚的一种有效的聚合引发剂。研究了聚(β-氯乙基缩水甘油醚)的酯化反应动力学, 并通过^1H NMR和IR光谱确立了酯化度的计算关系式。最后, 通过光交联的动力学研究发现, 酯化聚合物中的肉桂酰基含量为85%时, 材料的感光灵敏度最高。     

Synthesis and Properties of Aromatic Poly(Ether Sulfone)s and Poly(Etherketone)s Containing Naphthalene or Quinoline Units,and Methyl-Substituted Biphenyl-4,4′-Diols

Abstract

A series of poly(ether sulfone)s and poly(ether ketone)s were synthesized from combinations of 1,5- and 2,6-bis(4-fluorosulfonyl)naphthalene, 2,6-bis(4-fluorobenzoyl)naphthalene, and 2,6-bis(4-fluorobenzoyl)quinoline with 3,3′,5,5′-tetramethylbiphenyl-4,4′-diol and 2,2′,3,3′,5,5′-hexamethylbiphenyl-4,4′-diol. The polycondensations proceeded quantitatively in diphenylsulfone in the presence of anhydrous potassium carbonate to afford polymers with inherent viscosities between 0.40 and 1.28 dL/g measured in N-methyl-2-pyrrolidone or concentrated sulfuric acid. The tetramethyl- and hexamethyl-substituted aromatic polyethers exhibited good thermal stability, did not decompose below 330°C in both air and nitrogen atmospheres, and had higher glass transition temperatures than the corresponding unsubstituted polymers. The methylsubstituted poly(ether sulfone)s and poly(ether ketone)s showed good solubility in such common organic solvents as N-methyl-2-pyrrolidone, N,N-dimethylacetamide, tetrahydrofuran, chloroform, and 1,4-dioxane.     

Synthesis and characterization of soluble copoly(ether ketone)s containing double bonds

A series of copoly(ether ketone)s containing double bonds along the polymer chains were synthesized from the condensation polymerization of hydroquinone with 4,4′‐difluorobenzophenone and 4,5‐bis(4‐fluorobenzoyl)‐1‐methylcyclohexene in sulfolane containing anhydrous potassium carbonate. The presence of methylcyclohexene in the polymer chains resulted in an improvement in the solubility of poly(ether ketone)s in organic solvents such as chloroform, chlorobenzene, and sulfolane. As a result, the conditions for synthesizing these polymers were much milder than those for poly(ether ether ketone). The new copoly(ether ketone)s also showed good tensile properties and reasonable thermal stability. New polyethers containing pyrazine unites were obtained from the cyclization reaction of these copoly(ether ketone)s with hydrazine. The hydrazine cycloderivatives led to an increase in the glass‐transition temperatures and a decrease in solubility in organic solvents. © 2002 Government of Canada. Exclusive world‐wide publication rights in the article have been transferred to Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3449–3454, 2002     

Composite proton-conducting membranes based on poly(ethylene glycol vinyl glycidyl ether)

Composite proton-conducting membranes in the form of interpolymer films are prepared in an aqueous medium from sulfo-acid-modified poly(ethylene glycol vinyl glycidyl ether) and poly(vinyl alcohol). The initial poly(hydroxysulfo acid) is synthesized through the radical polymerization of ethylene glycol vinyl glycidyl ether followed by modification with sodium sulfite via epoxy groups and treatment with a cationite in the H form. The proton-conducting membranes feature improved thermal stability (200–250°C), a breaking strength of 1.0–8.9 MPa, elasticity (a relative elongation at break of 1.0–8.2%), chemical resistance, and specific proton conductivity attaining 10^?1 S/cm after doping with orthophosphoric acid.     

Poly(vinyl ether)s and poly(propenyl ether)s containing mesogenic groups: A new class of side-chain liquid-crystalline polymers

A new series of thermotropic liquid-crystalline polymers, poly(vinyl ether)s and poly(propenyl ether)s, containing the mesogen 4-methoxy-4′-hydroxybiphenyl in the side chain and different spacers between the mesogens and the backbone were synthesized and characterized by DSC and optical microscopy. Their mesomorphic behavior was compared to that of the corresponding polymethacrylates. In general the poly(propenyl ether)s showed lower transition temperatures and larger thermal stability ranges of their mesophases than the respective polymethacrylates, reflecting the effect of substituting the rigid ester bond connecting the spacer to the backbone in polymethacrylates by a more flexible ether bond. Also, poly(propenyl ether)s showed more ordered mesophases than the polymethacrylates, suggesting that a better decoupling of the mesogen and polymer backbone is obtained through the ether linkage.     

Vinyl‐terminated side‐chain liquid‐crystalline polyethers containing mesogenic benzylideneaniline moieties

The synthesis of two vinyl‐terminated side‐chain liquid‐crystalline polyethers containing benzylideneaniline moieties as mesogenic cores was approached in two different ways: by chemically modifying poly(epichlorohydrin) with suitable mesogenic acids or by polymerizing analogous glycidyl ester or glycidyl ether derivatives. In all the conditions tested, the first approach led to materials in which the imine group was hydrolyzed. The second approach led to the desired polymers PG2a and PG2b , but only from the glycidyl ether derivatives and when the initiator was the system that combined polyiminophosphazene base t‐Bu‐P₄ and 3,5‐di‐t‐butylphenol. These polymers were chemically characterized by IR and ¹H and ¹³C NMR spectroscopies. The estimated degrees of polymerization ranged from 30 to 36. The liquid crystalline behavior of the synthesized polymers was studied by differential scanning calorimetry, polarized optical microscopy (POM) and X‐ray diffraction. Both polymers behave like liquid crystals and exhibited a single mesophase, which was recognized as a smectic C mesophase, probably with a bilayer arrangement, i.e., a smectic C₂ mesophase. The crosslinking of both polymers was performed with dicumyl peroxide as initiator, which led to liquid crystalline thermosets. POM and X‐ray diffraction confirmed that the mesophase organization mantained on the crosslinked materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1877–1889, 2006     

NEW MATERIALS DERIVED FROM POLY(4-HYDROXYSTYRENE) AS LITHIUM BATTERY CELL COMPONENTS

A new class of polyethers has been prepared by the Mitsunobu coupling of poly(4-vinyl phenol), P4VP, with low molecular weight poly(ethylene glycol)methyl ether. These comb-like polymers, having ca. 20–30% residual phenols, were characterized by IR, DSC, and TGA. Results of thermal analysis on the polymers suggest thermal stability to at least 300°C and a glass transition temperature in the range ?30 to ?40°C. Complexes with LiPF₆ gave conductivities of ca. 1 × 10^?5 S/cm at room temperature. The polymers were blended with plasticized poly(vinylidene fluoride) (PVDF) to prepare porous films and subsequently infiltrated with lithium salts and ethylene and ethyl methyl carbonate. Ionic conductivities of these hybrid films were measured from ?20°C to 40°C. Conductivities as high as 2.4 × 10^?3 S/cm are observed at room temperature. The electrochemical stability of hybrid materials was studied by cyclic voltammetry.     

Langmuir and Langmuir-Blodgett films of multifunctional, amphiphilic polyethers with cholesterol moieties

Langmuir films of multifunctional, hydrophilic polyethers containing a hydrophobic cholesterol group (Ch) were studied by surface pressure-mean molecular area (π-mmA) measurements and Brewster angle microscopy (BAM). The polyethers were either homopolymers or diblock copolymers of linear poly(glycerol) (lPG), linear poly(glyceryl glycidyl ether) (lPGG), linear poly(ethylene glycol) (lPEG), or hyperbranched poly(glycerol) (hbPG). Surface pressure measurements revealed that the homopolymers lPG and hbPG did not stay at the water surface after spreading and solvent evaporation, in contrast to lPEG. Because of the incorporation of the Ch group in the polymer structure, stable Langmuir films were formed by Ch-lPG(n), Ch-lPGG(n), and Ch-hbPG(n). The Ch-hbPG(n), Ch-lPEG(n), Ch-lPEG(n)-b-lPG(m), Ch-lPEG(n)-b-lPGG(m), and Ch-lPEG(n)-b-hbPG(m) systems showed an extended plateau region assigned to a phase transition involving the Ch groups. Typical hierarchically ordered morphologies of the LB films on hydrophilic substrates were observed for all Ch-initiated polymers. All LB films showed that Ch of the Ch-initiated homopolymers is able to crystallize. This strong tendency of self-aggregation then triggers further dewetting effects of the respective polyether entities. Fingerlike morphologies are observed for Ch-lPEG(69), since the lPEG(69) entity is able to undergo crystallization after transfer onto the silicon substrate.