Separation and characterization of three positional isomers of dimaltosyl-cyclomaltoheptaose (dimaltosyl-beta-cyclodextrin).

A mixture of maltosylcyclomaltoheptaoses (maltosyl-beta-cyclodextrins, G2-beta CDs) was prepared from maltose and beta-cyclodextrin (beta CD) through the reverse action of Klebsiella pneumoniae pullulanase. Three positional isomers of dimaltosyl-beta CD in the mixture were separated by high-performance liquid chromatography on a reversed phase column and a graphitized carbon column. Their molecular weights were measured by fast-atom bombardment mass spectrometry, and the structures were established by methylation analysis, hydrolysis with glucoamylase to the known compounds, three positional isomers of diglucosyl-beta CD, and 13C-nuclear magnetic resonance spectroscopy.     

Resolution of positional isomers by capillary electrochromatography

Electroseparations have been very successful in increasing efficiencies and reducing analysis times. The analytical technique originally applied to open tube capillaries (capillary electrophoresis) has been used as a basis to develop renewed interest in electrochromatography. This paper describes the use of capillary electrochromatography to separate two positional isomers and describes a comparison between gas chromatography (GC), capillary electrochromatography (CEC) and nano-HPLC. The resolution of these isomers is quite crucial, since one of the isomers is the impurity in a pharmaceutically active drug.     

Interaction of positional isomers of dimethylbenzene with graphite

The optimized geometries and interaction energies of the intermolecular heterodimers of coronene with o-, m-, and p-dimethylbenzenes (xylenes) calculated by DFT in the PBE0 and B97D functionals were compared. The applicability of coronene as a model for qualitative assessment of the interaction of mononuclear aromatic compounds with the graphite surface was demonstrated. The necessity of including long-range dispersion interactions in DFT calculations of the dimerization energies of aromatic systems was shown. The sorption enthalpies of p- and m-xylenes were shown to be almost equal irrespective of the conditions of the chromatographic experiment. The preferred sorption of p- over m-xylene on graphite is solely due to the entropy factor.     

Separation of positional isomers of oxidation catalyst precursors

A series of polypyridyl ruthenium complexes of the general formula [Ru(tpy)(bpy')Cl]+ where tpy is 2,2':6',2"-terpyridine and bpy' is 4-carboxy-4'-methyl-2,2'-bipyridine (4-CO2H-4'-Mebpy), a proline derviative (4-CO-Pra-(Boc)(OMe)-4'-Mebpy), or 4-((diethoxyphosphinyl)methyl)-4'-methyl-2,2'-bipyridine (4-CH2PO3Et2-4'-Mebpy) are prepared. For each complex, two isomers exist, and these are separated chromatographically. The structure of the hexafluorophosphate salt of cis-[Ru(tpy)(4-CO2H-4'-Mebpy)Cl]+, cis-1, is determined by X-ray crystallography. The salt crystallizes in the monoclinic space group Cc with a = 12.4778(6) A, b = 12.6086(6) A, c = 20.1215(9) A, beta = 107.08200(1) degrees, Z = 4, R = 0.058, and Rw = 0.072. The structures of the remaining complexes are assigned by 1H NMR comparisons with cis-1. The complexes are potentially important precursors for the incorporation of RuIV=O2+ oxidants into polymers or peptides or for their adsorption onto oxide surfaces. Preliminary electrochemical results for the isomers of [Ru(tpy)(4-CH2PO3H2-4'-Mebpy)(H2O)]2+, 4, adsorbed on ITO (In2O3:Sn) surfaces add support to a recently proposed electron-transfer mechanism involving cross-surface proton-coupled electron transfer.     

Separation of glyceride positional isomers by silver ion chromatography

Separation of triglyceride and diglyceride positional isomers by silver ion high-performance liquid chromatography coupled with an evaporative light-scattering detector is described. The triglyceride isomers had a fatty acid composition of CLC and CCL, where C and L were caprylic acid and linoleic acid, respectively. Diglyceride isomers, 1,2(2,3)-diglyceride and 1,3-diglyceride, which contained caprylic acid were separated too. A solvent system based on n-hexane, 2-propanol, ethyl acetate, and acetonitrile with a flow-rate of 0.8 ml/min was developed. Calibration curves of CLC and CCL were achieved with triolein as internal standard. Using this method, the incorporation of linoleic acid onto specific a position of glycerol backbone can be monitored.     

Chromatographic selectivity study of 4-fluorophenylacetic acid positional isomers separation

Unique properties of the fluorine atom stimulate widespread use and development of new organofluorine compounds in agrochemistry, biotechnology and pharmacology applications. However, relatively few synthetic methods exhibit a high degree of fluorination selectivity, which ultimately results in the presence of structurally related fluorinated isomers in the synthetic product. This outcome is undesirable from a pharmaceutical perspective as positional isomers possess different reactivity, biological activity and toxicity as compared to the desired product. It is advantageous to control positional isomers in the early stages of the synthetic process, as rejection and analysis of these isomers will likely become more difficult in later stages. The current work reports the development of a chromatographic analysis of 2- and 3-fluorophenylacetic acid positional isomer impurities in 4-fluorophenylacetic acid (4-FPAA), a building block in the synthesis of an active pharmaceutical ingredient. The method is employed as a part of a Quality by Design Approach to control purity of the starting material in order to eliminate the presence of undesirable positional isomers in the final drug substance. During method development, a wide range of chromatographic conditions and structurally related positional isomer probe molecules were exploited in an effort to gain insight into the specifics of the separation mechanism. For the systems studied it was shown that the choice of organic modifier played a key role in achieving acceptable separation. Further studies encompassed investigation of temperature influence on retention and selectivity of the FPAA isomers separation. Thermodynamic analysis of these data showed that the selectivity of the 2- and 4- fluorophenylacetic acids separation was dominated by an enthalpic process, while the selectivity of the 4- and 3-fluorophenylacetic acids separation was exclusively entropy driven (Delta(DeltaH degrees approximately 0). Studies of chromatographic behavior were complemented by solid state NMR experiments which provided valuable information regarding the relationship between stationary phase solvation and selectivity.     

Anti-Leishmania and cytotoxic activities of perillaldehyde epoxide synthetic positional isomers

Leishmaniasis belongs to a complex of zoonotic disease caused by protozoa of the genus Leishmania and is considered a major public health problem. Several essential oil chemical components have inhibitory effect against protozoa, including Leishmania donovani. Thus, the aim of this study was to evaluate for the first time the anti-Leishmania activity of two p-menthane monoterpene isomers (EPER-1: perillaldehyde 1,2-epoxide and EPER-2: perillaldehyde 8,9-epoxide) against L. donovani promastigotes as well as evaluating cytotoxic effect on mononuclear peripheral blood cells. Results of anti-Leishmania assay revealed that EPER-2 (IC₅₀ = 3.8 μg.mL^?1) was 16-fold more potent than its isomer EPER-1 (IC₅₀ = 64.6 μg.mL^?1). In contrast to PBMC cells, EPER-2 was not cytotoxic (IC₅₀ > 400 μg.mL^?1) when compared to positive control. These data suggest that the disposition of epoxide group into the p-menthane skeleton affects the anti-Leishmania activity, being that the presence of the exocyclic epoxide group considerably increased potency. Thus, it was possible to observe that the location of the epoxide group into the p-menthane skeleton resulted in different potencies.     

Resolution of triacylglycerol positional isomers by reversed-phase high-performance liquid chromatography

The ability of reversed-phase high-performance liquid chromatography (RP-HPLC) to separate some positionally isomeric disaturated and monounsaturated triacylglycerols (TAGs) as intact species is demonstrated for the first time. Mobile phases of acetonitrile modified with methanol, ethanol, 2-propanol, 1-propanol, 1-butanol, acetone, or dichloromethane were tested for the separation of POP-PPO, PLP-PPL, PEP-PPE, and PDP-PPD (P-palmitic, O-oleic, L-linoleic, E-eicosapentaenoic, D-docosahexaenoic acid residue) on a single RP-HPLC column. The resolution improved with increasing number of double bonds in the acyl residues. While POP and PPO were only partially resolved, PDP and PPD were fully separated with all tested mobile phases, except those containing methanol. Also separated were the four TAGs having the same equivalent carbon number (ECN = 42), PEP, PPE, PDP, and PPD, on a single RP-HPLC column with mobile phase acetonitrile-2-propanol (70:30, v/v) at 0.8 mL/min. In all cases the isomer with the unsaturated acyl residue in either 1- or 3-position was retained more strongly than the respective 2-isomer.     

Differentiation of positional isomers of nitro meso-tetraphenylporphyrins by tandem mass spectrometry

We studied by tandem mass spectrometry two isomers of nitro meso-tetraphenylporphyrin, one with a nitro group in the para position of a phenyl ring and the other with the same group in a beta-pyrrolic position, and their copper complexes. Collisional activation of the molecular ions of both free-base porphyrins and of their copper complexes produces an array of product ions that permit ready differentiation of the two positional isomers. The diagnostic ions, when the nitro group is in a beta-pyrrolic position, may be produced through intramolecular and double cyclization processes, triggered by the interaction of the nitro substituent with the neighboring meso-phenyl ring. These diagnostic ions do not form when the nitro group is in the para position. The gas-phase processes have precedents in solution chemistry.     

Composition analysis of positional isomers of phosphatidylinositol by high-performance liquid chromatography

An HPLC-based method has been developed for composition analysis of six positional isomers of phosphatidylinositol (PI), of which the phosphatidyl group was connected to different positions of the myo-inositol moiety. The method employed a combination of two types of HPLC analyses. One was direct separation of the six PI isomers into four peaks of 1(3)-PI, 2-PI, 4(6)-PI and 5-PI on a normal-phase silica gel column. The second method was for the separations of 1-PI from 3-PI and 4-PI from 6-PI, which were not separable on the normal-phase column. This method involved conversion of PI isomers into pentakis-(R)-1-phenylethylcarbamate (PEC) derivatives, which were separated on a reversed-phase column. Using the established method, positional specificity of several engineered phospholipases D in enzymatic synthesis of PI from myo-inositol and phosphatidylcholine was investigated. This was performed by analyzing the isomeric composition of PIs synthesized by the mutant enzymes. Among five mutant enzymes tested, two showed strong specificity to 1-OH, one showed moderate preference to 1-OH, one preferred 3-OH, and one showed broad specificity towards 1-, 3-, 4- and 6-OH.     

A switchable palladium-complexed molecular shuttle and its metastable positional isomers

We report the design, synthesis, characterization, and operation of a [2]rotaxane in which a palladium-complexed macrocycle can be translocated between 4-dimethylaminopyridine and pyridine monodentate ligand sites via reversible protonation, the metal remaining coordinated to the macrocycle throughout. The substitution pattern of the ligands and the kinetic stability of the Pd-N bond means that changing the chemical state of the thread does not automatically cause a change in the macrocycle's position in the absence of an additional input (heat and/or coordinating solvent/anion). Accordingly, under ambient conditions any of the four sets of protonated and neutral, stable, and metastable co-conformers of the [2]rotaxane can be selected, manipulated, isolated, and characterized.     

Non-aqueous capillary electrophoresis of the positional isomers of a sulfated monosaccharide

A non-aqueous capillary electrophoresis (NACE) method coupled to indirect absorbance detection has been developed for the separation of the three positional isomers of monosulfated fucose. The optimized electrolyte was composed of 12 mM ethanolamine, 2 mM trimesic acid buffer in a methanol-ethanol (1:1, v/v) mixture. As the retained electrolyte entails no separating agent other than the pH buffer, the NACE separation of the positional isomers has been ascribed mainly to selective ion-pairing with the electrolyte counter-ion and the possibility of a selective solvation effect in the alcohol mixture. In the absence of pure isomeric standards, peak identification was completed by MS and NMR spectroscopy and selective enzymatic desulfation. This method should be of interest for the structure elucidation of monosulfated fucose-based polysaccharides and for the screening of sulfoesterase of unknown activity.     

Comparative analysis of the electronic structure of positional isomers: Indole-isoindole

On the basis of an analysis of the canonical and localized molecular orbitals of indole and isoindole, calculated in the SCF and CNDO/2 approximations, as well as an x-ray crystallographic investigation of 2-methyl-isoindole, a comparison of the electronic structure of the positional isomers was made. The 10-electronic system of isoindole is more integral than for indole: isoindole is a single 10-electronic system with an appreciable localization of the bonds in the carbocyclic portion of the bicycle; the electronic structure of indole can be represented in a first approximation as the aggregate of three weakly interacting -subsystems: the benzene ring, the double bond between the - and -carbon atoms, and the free electron pair of the nitrogen atom.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1497–1503, November, 1984.     

十一钨锆杂多配合物位置异构体的合成表征及催化性能

过渡元素取代的杂多配合物由于其独特的催化活性和抗病毒性受到人们的重视 ,由于缺位 β位的介稳定性和异构化 ,给合成带来了一定的困难。我们发现 ,某些单取代金属衍生物中 β异构体具有良好的催化活性[1 ,2 ] 。本文报道了通式为α ,βi K6[SiW1 1 ZrO40 ]·XH2 O( βi=β1 ,β2 ,β3)的四种异构体 (简记作α ,β SiW1 1 Zr)的合成、表征及四种异构体对烯烃环氧化反应的催化活性 ,为研究Zr杂多化合物的应用提供选择。1　实验部分1 1　仪器与试剂日本岛津IR 40 8红外光谱仪 (KBr压片 ) ,美国PE公司产λ 35型紫外分光光谱仪 ;384B…     

HPLC separation of triacylglycerol positional isomers on a polymeric ODS column

A polymeric ODS column was applied to the resolution of triacylglycerol positional isomers (TAG-PI), i.e. 1,3-dioleoyl-2-palmitoyl-glycerol (OPO) and 1,2-dioleoyl-3-palmitoyl-rac-glycerol (OOP), with a recycle HPLC system. To investigate the ODS column species and the column temperatures for the resolution of a TAG-PI pair, a mixture of OPO and OOP was subjected to an HPLC system equipped with a non-endcapped polymeric, endcapped monomeric, endcapped intermediate, or non-endcapped monomeric ODS column at three different column temperatures (40, 25, or 10 degrees C). Only the non-endcapped polymeric ODS column achieved the separation of OPO and OOP, and the lowest column temperature (10 degrees C) showed the best resolution for them. The other pair of TAG-PI, a mixture of 1,3-dipalmitoyl-2-oleoyl-glycerol (POP) and 1,2-dipalmitoyl-3-oleoyl-rac-glycerol (PPO) was also subjected to the system equipped with a non-endcapped polymeric or monomeric ODS column at five different column temperatures (40, 32, 25, 17, and 10 degrees C). Thus, POP and PPO were also separated on only the non-endcapped polymeric ODS column at 25 degrees C. However, no clear peak appeared at 10 degrees C. These results would indicate that the polymeric ODS stationary phase has an ability to recognize the structural differences between TAG-PI pairs. Also, the column temperature is a very important factor for separating the TAG-PI pair, and the optimal temperature would relate to the solubility of TAG-PI in the mobile phase. Furthermore, the recycle HPLC system provided measurements for the separation and analysis of TAG-PI pairs.