Synthesis,characterization and DNA binding studies of ruthenium(II) complexes: [Ru(bpy)<Subscript>2</Subscript>(dtmi)]<Superscript>2+</Superscript> and [Ru(bpy)<Subscript>2</Subscript>(dtni)]<Superscript>2+</Superscript>

Two new ruthenium(II) polypyridyl complexes (1) (dtmi = 3-(pyrazin-2-yl)-as-triazino[5,6-f]-5-methoxylisatin) and (2) (dtni = 3-(pyrazin-2-yl)-as-triazino[5,6-f]-5-nitroisatin) have been synthesized and characterized by elemental analysis, FAB-MS, ES-MS and ¹H-n.m.r. The DNA-binding patterns of complexes were investigated by spectroscopic titration, viscosity measurements and thermal denaturation. The results indicate that the complexes (1) and (2) interact with calf thymus DNA (CT-DNA) by intercalative mode. Due to the withdrawing electronic substitutent in the intercalative ligand, ptni, the DNA-binding affinity of the complexes (2) is larger than that complex (1) does.     

Synthesis,DNA-binding and photocleavage studies of cobalt(III) complexes [Co(bpy)<Subscript>2</Subscript>(dpta)]<Superscript>3+</Superscript> and [Co(bpy)<Subscript>2</Subscript>(amtp)]<Superscript>3+</Superscript>

Two novel cobalt(III) mixed-polypyridyl complexes [Co(bpy)₂(dpta)]³⁺ and [Co(bpy)₂(amtp)]³⁺ (bpy = 2,2′-bipyridine, dpta = dipyrido-[3,2-a;2′,3′-c]-thien-[3,4-c]azine, amtp = 3-amino-1,2,4-triazino[5,6-f]-1,10-phenanthroline) have been synthesized and characterized. The interaction of Co^III complexes with calf thymus DNA was investigated by spectroscopic and viscosity measurements. Results suggest that the two complexes bind to DNA via an intercalative mode. Moreover, Co^III complexes have been found to promote the photocleavage of plasmid DNA pBR322 under irradiation at 365 nm. The mechanism studies reveal that hydroxyl radical (OH^•) is likely to be the reactive species responsible for the cleavage of plasmid DNA by [Co(bpy)₂(dpta)]³⁺ and superoxide anion radical (O ₂ ^•− ) acts as the key role in the cleavage reaction of plasmid DNA by [Co(bpy)₂(amtp)]³⁺.     

Direct comparison of Au<Stack><Subscript>3</Subscript><Superscript>+</Superscript></Stack> and C<Stack><Subscript>60</Subscript><Superscript>+</Superscript></Stack> cluster projectiles in SIMS molecular depth profiling

The sputtering properties of two representative cluster ion beams in secondary ion mass spectrometry (SIMS), C(60)(+) and Au(3)(+), have been directly compared. Organic thin films consisting of trehalose and dipalmitoylphosphatidylcholine (DPPC) are employed as prototypical targets. The strategy is to make direct comparison of the response of a molecular solid to each type of the bombarding cluster by overlapping the two ion beams onto the same area of the sample surface. The ion beams alternately erode the sample while keeping the same projectile for spectral acquisition. The results from these experiments are important to further optimize the use of cluster projectiles for SIMS molecular depth profiling experiments. For example, Au(3)(+) bombardment is found to induce more chemical damage as well as Au implantation when compared with C(60)(+). Moreover, C(60)(+) is found to be able to remove the damage and the implanted Au effectively. Discussions are also presented on strategies of enhancing sensitivity for imaging applications with cluster SIMS.     

Synthesis,Structure, and Magnetic Properties of a Twist Linear Tetranuclear Co<Stack><Subscript>2</Subscript><Superscript>III</Superscript></Stack>Ln<Stack><Subscript>2</Subscript><Superscript>III</Superscript></Stack> Complexes

A series of twist linear tetranuclear 3d–4f Co ₂ ^III Ln ₂ ^III [Ln = Gd (1), Tb (2), Dy (3), Ho (4), Er (5)] complexes have been prepared under solvothermal conditions and structurally characterized with Schiff-base ligand 2-(((2-hydroxy-3-methoxyphenyl)methylene)amino)-2-(hydroxymethyl)-1,3-propanediol (H₄L). The two central Co ions are linked by two alkoxyl oxygen atoms, and one Ln ion lying above and the other below the Co–Co dimer, form a twist linear array. The magnetic susceptibility studies reveal antiferromagnetic or ferromagnetic behaviour, whilst dynamic magnetic studies indicate no slow magnetic relaxation for these complexes.     

Hexametavanadates M<Stack><Subscript>4</Subscript><Superscript>+</Superscript></Stack>M<Superscript>2+</Superscript>(VO<Subscript>3</Subscript>)<Subscript>6</Subscript>: Thermal stability and luminescent characteristics

Rhombohedral hexametavanadates K₄Sr(VO₃)₆, K₄Ba(VO₃)₆, Rb₄ Ba(VO₃)₆, and Cs₄Ba(VO₃)₆ melt incongruently in the temperature range of 491 to 600°C. Cooling of peritectic melts yields mixtures of compounds typical of M₂⁺O-M²⁺O-V₂O₅ systems, far from equilibrium and depending on the cooling kinetics. The vanadate Cs₄Ba(VO₃)₆ undergoes reversible polymorphic transformation at 360°C. All compounds show broad-band luminescence with a maximum of the luminescence spectrum at 490–590 nm with three types of excitation. The vanadates K₄Sr(VO₃)₆ and Rb₄Ba(VO₃)₆ show the highest luminescence intensity at room temperature. The latter is also most efficient at liquid nitrogen temperatures. The luminescence spectra depend on the excitation of vanadates. Three hypotheses were put forward to interpret this finding. The nature of luminescence is attributed to the relaxation of electronic excitation in [VO₄]³⁻ structural tetrahedra present in the vanadates. The performance characteristics of luminophores were determined. These luminophores may be promising as X-ray luminescent screens, radioluminescence indicators, and light-emitting diode devices.     

Density functional theory study of UO<Stack> <Subscript>2</Subscript> <Superscript>2+</Superscript> </Stack> solvation in 1-butyl-3-methylimidazolium chloride

Structural characteristics and energies of [UO₂Cl₄(BMIm)_n]^(n–2)+ (n = 1-4) solvation complexes have been studied by the density functional theory (DFT) method in the SVWN5 local functional approximation.     

Synthesis,crystal structure of a new tetranuclear Ni<Stack><Subscript>2</Subscript><Superscript>II</Superscript></Stack>Cu<Stack><Subscript>2</Subscript><Superscript>II</Superscript></Stack> complex containing a macrocyclic ligand

The first inorg/organic hybrid complex incorporating the macrocyclic oxamide, of formula [(NiL)₂Cu₂(μ-NSC)₂(NSC)₂] (1), (NiL, H₂L = 2, 3-dioxo-5,6,14,15-dibenzo-1,4,8,12-tetraazacyclo-pentadeca-7,13-dien), have been synthesized and structurally characterized. The crystals crystallize in the triclinic system, space group P-1, for (1) a = 8.319(3) Å, b = 10.434(4) Å, c = 14.166(5) Å, a = 107.030(5)°, β  =  91.257(5)°, γ = 107.623(5)°. The complex involved both bridging N, S-ligand, and oxamide ligand, C–H?S interactions and NCS → Ni weak coordination interactions making the complex superamolecular.     

A New Molybdophosphate Constructed From {Mo<Stack><Subscript>2</Subscript><Superscript>V</Superscript></Stack>O<Subscript>4</Subscript>(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>}<Superscript>2+</Superscript> and 1-Hydroxyethylidenediphosphonate

A new molybdophosphate (NH₄)₈{Mo₂^VO₄[(Mo₂^VIO₆)CH₃C(O)(PO₃)₂]₂}·14H₂O (1), has been synthesized by the reaction of {Mo₂^VO₄(H₂O)₆}²⁺ fragments with 1-hydroxyethylidenediphosphonate (hedp HOC(CH₃)(PO₃H₂)₂), and it is characterized by ³¹P NMR, IR, UV, element analysis, TG and single-crystal X-ray analysis. The structure analysis reveals that the polyoxoanion can be described as two {(Mo₂^VIO₆)(CH₃C(O)(PO₃)₂} units connected by a {Mo₂^VO₄}²⁺ moiety. In the structure, the six Mo atoms are arranged into a new “W-shaped” structure, which represents a new kind of molybdophosphate.     

Electronic spectra of C<Subscript>6</Subscript>H<Superscript>+</Superscript> and C<Subscript>6</Subscript>H<Stack><Subscript>3</Subscript><Superscript>+</Superscript></Stack> in the gas phase

Measurement of the ³Π-³Π transition of C₆H⁺ in the gas phase near 19486 cm⁻¹ is reported. The experiment was carried out with a supersonic slit-jet expansion discharge using cavity ringdown absorption spectroscopy. Partly resolved P lines and observation of band heads permitted a rotational contour fit. Spectroscopic constants in the ground and excited-state were determined. The density of ions being sampled is merely 2×10⁸ cm⁻³. Broadening of the spectral lines indicates the excited-state lifetime to be ≈100 ps. The electronic transition of HC₆H₂⁺ at 26402 cm⁻¹ assumed to be ¹A₁-X¹A₁ in C_2v symmetry could not be rotationally resolved.     

The photodynamics of the [Ru(bpy)<Subscript>3</Subscript>]<Superscript>2+</Superscript> ion dopant in a solvent exposed silica sol–gel thin film

The [Ru(bpy)₃]²⁺ ion was encapsulated in a silica based sol–gel thin film, and the luminescence decay time constant of the photo-excited ³MLCT (metal-ligand-charge-transfer) was examined when this thin film was immersed in water, methanol, ethanol, 2-propanol, and glycerol. The luminescence decays of the films in the methanol, 2-propanol, and glycerol were better explained by a KWW model, while the luminescence decay of film immersed in water and ethanol were both well explained by a single exponential decay. Intriguingly, the dynamics of the dopants immersed in water, ethanol as well as in sol–gel bulk deviated from a single exponential fit and began to better explained by the the KWW model as temperature increased. The energy gap, ΔE(sol–gel film) and ΔE(solution), between the lowest ³MLCT state and atom localized ³ dd state for dopants under the presence of all solvents tested in this study were extracted from the temperature dependence study of the luminescence decay time constant. Generally, the ΔE(sol–gel film) values of ethanol and water were reduced from ΔE(solution), and ΔE(sol–gel film) value in all solvents matched the value of ΔE for sol–gel bulk. The effect on the dynamics in solvent over three weeks was investigated, and the films immersed in water presented the most remarkable monotonic increase in relaxation rates finally approaching the asymptotic value observed in the water solution. This phenomenon was considered to correspond to a trapping environment change due to a hydrophilic interaction through sequential intrusion of water or ethanol solvent into sol–gel pores.     

Cubane pyridine-acetylacetonate cluster complexes with the M<Subscript>3</Subscript>CuS<Stack><Subscript>4</Subscript><Superscript>5+</Superscript></Stack> core (M = Mo,W)

The reactions between [Mo₃(μ₃-S)(μ₂-S)₃(Acac)₃(Py)₃]PF₆ (HAcac is acetylacetone, Py is pyridine) and CuX (X = Cl, I, SCN) afford heterometallic cubane clusters [Mo₃(CuX)(μ₃-S)₄(Acac)₃(Py)₃]PF₆. The structures of two new compounds, [Mo₃(CuCl)S₄(Acac)₃(Py)₃]PF₆ · 3.25CH₂Cl₂ · 0.5C₆H₅CH₃ and [Mo₃(CuI)S₄(Acac)₃(Py)₃]PF₆ · 4C₆H₆, are determined by X-ray diffraction analysis. All synthesized compounds are characterized by elemental analysis and IR spectra. According to the vibrational spectra, the thiocyanate complex in the solid state is a mixture of the bond isomers [Mo₃(CuNCS)S₄(Acac)₃(Py)₃]PF₆ and [Mo₃(CuSCN)S₄(Acac)₃(Py)₃]PF₆, whereas in solution this complex exists as a isothiocyanate form.     

X-ray fluorescence determination of the FeO/Fe<Subscript>2</Subscript>O<Stack><Subscript>3</Subscript><Superscript>tot</Superscript></Stack> ratio in rocks

Chances for estimating the FeO/Fe₂O₃^tot ratio in rocks by the K and L series of X-ray fluorescence spectra are studied. The errors in the determination of FeO/Fe₂O₃^tot by the intensity ratio of the Kβ_2,5/Kβ_1,3 and Lβ/Lα_1,2 lines are compared. The relative standard deviation of determining FeO using a set of 49 standard samples of eruptive rocks varies in the range 5–16%, depending on the ratio FeO/Fe₂O₃^tot and the concentration of FeO. The better precision is attainable for a ratio above 0.45 at a FeO concentration in the range 5–15%. For samples of andesites and basalts, the relative standard deviation is better than 4%, for rocks of the granite family it is 23% at FeO concentrations below 3%. For samples of metamorphic and sedimentary rocks, the error of FeO determination is higher than that for the eruptive ones. For samples with the ratio FeO/Fe/Fe₂O₃^tot < 0.25, the deviation may exceed 30 rel %. In contrast to chemical analysis, the X-ray fluorescence method appears advantageous in time and cost of sample preparation and can be used for routine analysis in geochemical research.     

Thermal expansion of ternary oxides in the M<Stack><Subscript>2</Subscript><Superscript>I</Superscript></Stack>O-Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>-TiO<Subscript>2</Subscript> system

Compounds formed in the M₂^IO-Cr₂O₃-TiO₂. system were synthesized by solid-state reactions. These compounds crystallize in hollandite- and spinel-type structures. The features of themal decomposition of the compounds with the compositions M₂^ICr₂Ti₆O₁₆(M^I = Na, K, Cs) and LiCrTiO₄ were revealed, and their thermal expansion coefficients were determined with the use of high-temperature X-ray diffraction analysis.     

DNA intercalating studies of [Ru(bpy)<Subscript>2</Subscript>HPIP]<Superscript>2+</Superscript> with intramolecular hydrogen bond ligand based on introduction of copper ion

The effects of copper ion on the interaction of [Ru(bpy)₂HPIP]²⁺(bpy = 2,2′-bipyridine, HPIP = 2-(2-hydroxyphenyl) imidazo [4,5-f] [1, 10] phenanthroline) with DNA have been investigated by electronic absorption spectroscopy and fluorescence spectroscopy. HPIP ligand of the complex with an intramolecular hydrogen bond can bind Cu²⁺ in the absence of DNA, as revealed by the absorbance and fluorescence decrease for [Ru(bpy)₂HPIP]²⁺. The resultant heterometallic complex binds to DNA via intercalation of HPIP into the DNA base pairs and its DNA-binding ability is stronger than [Ru(bpy)₂HPIP]²⁺ itself. The DNA bound [Ru(bpy)₂HPIP]²⁺ cannot bind Cu²⁺ at low Cu²⁺ concentration and the intramolecular hydrogen bond in HPIP is located inside the DNA helix. While the Cu²⁺ concentration is relative high, Cu²⁺ can quench the fluorescence of DNA bound [Ru(bpy)₂HPIP]²⁺. The quenching reason is proposed.     

Composition and structure of solid solutions in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript>-V<Stack><Subscript>2</Subscript><Superscript>5+</Superscript></Stack>O<Subscript>5</Subscript> system with the structure sillenite

In the Bi₂O₃-SiO₂-V₂⁵⁺+O₅ system, single crystal solid solutions of the sillenite family of the general composition Bi₂₄(Bi,Si,V)₂O₄₀ are obtained by a hydrothermal method and for the first time characterized by neutron and X-ray diffraction analysis. The tetrahedral position is found to contain vanadium ions with different formal charges (V⁴⁺ and V⁵⁺) responsible for green and orange colors, respectively, of the samples. For the first time, for some sillenites of this system dissymmetrization of the structure (a transition from the I23 space group into P23) is revealed, which is caused by the presence of several atoms in one crystallographic position and also by crystal growth conditions.     

Oxidation of Diethyl Sulfide in Aqueous Solutions by Peroxynitrite and the H<Subscript>2</Subscript>O<Subscript>2</Subscript>-NO<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> System

It was found that nitrite anions are effective activators of hydrogen peroxide in the reaction with diethyl sulfide. The observed kinetics are consistent with the proposed intermediate formation of peroxynitrous acid (ONOOH). The rate constants for the reaction of diethyl sulfide Et₂S with the acid ONOOH (k₀ = 1.8⋅10³ L/mol⋅s) and with the anion ONOO⁻ (k₋ = 6⋅10⁻² L/mol⋅s) are respectively 10⁵ and three times higher than with hydrogen peroxide. __________ Translated from Teoreticheskaya i Eksperimental'naya Khimiya, Vol. 41, No. 5, pp. 290–295, September–October, 2005.     

Phase transitions in double molybdates K<Subscript>2</Subscript>M<Stack><Subscript>2</Subscript><Superscript>II</Superscript></Stack>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> with M = Mg or Co

Phase transitions and cation mobility in double molybdates K₂M ₂ ^II (MoO₄)₃ with M = Mg or Co and the products of their heterovalent doping with scandium(III) and vanadium(V) have been studied. The transition from low to high conductivity in K₂M ₂ ^II (MoO₄)₃ is the result of a two-stage phase transition, whose occurrence is significantly extended in time. Heterovalent substitutions noticeably decrease the heat of the phase transition. The transition to the low-temperature phase is not achieved even after long-term exposure.     

Photoelectrocatalytic oxidation of GMP on an ITO electrode modified with clay/[Ru(phen)<Subscript>2</Subscript>(dC18bpy)]<Superscript>2+</Superscript> hybrid film

An indium tin oxide (ITO) electrode modified with monolayer clay/[Ru(phen)₂(dC18bpy)]²⁺ (phen=1,10-phenanthroline, dC18bpy = 4,4′-dioctadecyl-2,2′ bipyridyl) hybrid film has been fabricated by the Langmuir-Blodgett (LB) method. Atomic force microscopy revealed that the single-layered hybrid film of clay/[Ru(phen)₂(dC18bpy)]²⁺ (denoted as Clay-Ru) was closely packed at a surface pressure of 25 mN·m⁻¹ and had a thickness of 3.4±0.5 nm. Cyclic voltammograms showed that the redox current of Ru(II) complex decreased when incorporated into the clay film, suggesting that the clay layer acts as a barrier against electron transfer. When applied to oxidizing the mononucleotide of guanosine 5′-monophosphate (GMP), a large catalytic oxidative current was achieved on the Clay-Ru(II) modified ITO electrode at the external potential above 900 mV (vs. Ag|AgCl|KCl) and, more significantly, this response was further enhanced by light irradiation (λ>360 nm), in which the photocurrent is increased about 11 times in comparison with that of a bare ITO. Mechanism of the photoelectrocatalytic effect was proposed in terms of the reduction of the photoelectrochemically generated Ru(III) complex in the Clay-Ru film by GMP. Supported by the National Natural Science Foundation of China (Grant Nos. 20471043 and 20843007), Zhejiang Provincial Natural Science Foundation (Grant Nos. Y404118 and Y408177), the “151” Distinguished Person Foundation of Zheji-ang Province of China, Zhejiang Technology Project Foundation (Grant No. 2007C21134) and Wenzhou Technology Project Foundation (Grant No. N2004B040)     

Manganites NdMg<Stack><Subscript>3</Subscript><Superscript>I</Superscript></Stack>Mg<Subscript>3</Subscript>Mn<Subscript>4</Subscript>O<Subscript>12</Subscript> (M<Superscript>I</Superscript> = Li,Na, K): X-ray diffraction data

NdLi₃Mg₃Mn₄O₁₂, NdNa₃Mg₃Mn₄O₁₂, and NdK₃Mg₃Mn₄O₁₂ manganites were synthesized for the first time by solid phase reactions of neodymium(III) and manganese(III) oxides with lithium, sodium, potassium, and magnesium carbonates. X-ray diffraction showed that the compounds crystallized in the tetragonal crystal system. Their unit cell parameters were determined.