Hybrid active and passive control of fan noise

This paper deals with the global reduction of axial flow fan noise in ducts in a building using a hybrid passive-active noise control method. The effectiveness of using an infra-red device as a reference signal source is also investigated. It is shown that using such a hybrid noise control system over an axial-flow fan reduces the overall sound pressure level by 5 dB(A) in the surrounding environment and global control of the blade passing frequency can also be achieved. This paper also shows that using an infra-red device as a reference signal source produces marginally better control as compared with using a microphone reference sensor. Moreover, long term stability is guaranteed and the possibility of acoustic feedback is eliminated.     

噪声主动控制研究的发展与动向

本回顾了噪声主动控制的典型设计方法和常见的算法,结合当前较新的鲁棒控制方法,指出今后噪声主动控制的一些发展动向,为这一技术的实用性提供借鉴。     

空间有源消声的微机控制

本文讨论了通用微机控制空间有源消声，以修正的ＰＩＤ算法加上逻辑判断构成的控制软件，使得系统收敛迅速，跟踪速度快，消声效果令人满意，而且系统工作稳定可靠。     

空间有源消声的微机控制

本文讨论用通用微机控制空间有源消声．以修正的PID（比例、积分、微分）算法加上逻辑判断构成的控制软件，使得系统收敛迅速，跟踪速度快，消声效果令人满意，而且系统工作稳定可靠，     

A simplified adaptive feedback active noise control system

In the adaptive feedback active noise control system based on the internal model control (IMC) structure, the reference signal is regenerated by synthesizing the error signal and the secondary signal filtered with the estimation of the secondary path, hence more computation load and extra programming are required. Motivated by the engineering truth that the primary noise cannot be completely cancelled in most practical active noise control applications and the error signal still contains some portions of the primary noise, a simplified adaptive feedback active noise control system is proposed in this paper, which adopts the error signal directly as the reference signal in an adaptive feedforward control system and utilizes the leaky filtered-x LMS algorithm to update the controller. The convergence properties of the proposed system are investigated and its advantages are discussed by comparing with other feedback control systems as well as the weakness. Finally, simulations and experiments are carried out to demonstrate the effectiveness of the proposed system.     

Improving performance of FxRLS algorithm for active noise control of impulsive noise

Active noise control (ANC) systems employing adaptive filters suffer from stability issues in the presence of impulsive noise. New impulsive noise control algorithms based on filtered-x recursive least square (FxRLS) algorithm are presented. The FxRLS algorithm gives better convergence than the filtered-x least mean square (FxLMS) algorithm and its variants but lacks robustness in the presence of high impulsive noise. In order to improve the robustness of FxRLS algorithm for ANC of impulsive noise, two modifications are suggested. First proposed modification clips the reference and error signals while, the second modification incorporates energy of the error signal in the gain of FxRLS (MGFxRLS) algorithm. The results demonstrate improved stability and robustness of proposed modifications in the FxRLS algorithm. However, another limitation associated with the FxRLS algorithm is its computationally complex nature. In order to reduce the computational load, a hybrid algorithm based on proposed MGFxRLS and normalized step size FxLMS (NSS-FXLMS) is also developed in this paper. The proposed hybrid algorithm combines the stability of NSS-FxLMS algorithm with the fast convergence speed of the proposed MGFxRLS algorithm. The results of the proposed hybrid algorithm prove that its convergence speed is faster than that of NSS-FxLMS algorithm with computational complexity lesser than that of FxRLS algorithm.     

Simulation study on active noise control for a 4-T MRI scanner

The purpose of this work is to study computationally the possibility of the application of a hybrid active noise control technique for magnetic resonance imaging (MRI) acoustic noise reduction. A hybrid control system combined with both feedforward and feedback loops embedded is proposed for potential application on active MRI noise reduction. A set of computational simulation studies were performed. Sets of MRI acoustic noise emissions measured at the patient's left ear location were recorded and used in the simulation study. By comparing three different control systems, namely, the feedback, the feedforward and the hybrid control, our results revealed that the hybrid control system is the most effective. The hybrid control system achieved approximately a 20-dB reduction at the principal frequency component. We concluded that the proposed hybrid active control scheme could have a potential application for MRI scanner noise reduction.     

机车驾驶室中自适应有源降噪系统的研究

根据机车驾驶室中噪声特征的分析结果，提出了采用FIR滤波器的自适应有源降噪(ANNC)系统。为消除机车驾驶室中严重的背景噪声干扰影响，应用伪随机相关法对驾驶室中的噪声脉冲响应进行测量。通过数字仿真研究，对基于IMS算法的ANNC系统的关键参数进行了寻优。最后，在实际声场中建立了实时双通道ANNC系统并进行了相关的实验验证。仿真与实验的结果证明了本文提出的AANC系统的可行性和有效性。     

A compound secondary source for active noise radiation control

Based on the analysis of active noise control system with multi-channel monopole secondary sources, a kind of compound secondary source is proposed in this paper. The proposed compound secondary source consists of two closely located monopole sources with their distance much smaller than a wavelength. The characteristics of the compound source are analyzed, and the performances of the active noise control system with the compound secondary sources on the monopole primary sound field and sound radiated by a plate are investigated both numerically and experimentally. It has been found that the proposed compound secondary sources control system can provide higher noise reduction for free field noise radiation control with the same number of control channels. It is shown that the better performance in noise reduction of the compound secondary sources control system is mainly due to the directivity of the secondary sources where the energy radiation pattern of the compound sources is similar to that of the primary sources.     

应用于有源声辐射控制的一种组合次级声源

在分析多通道单极子次级源控制系统的基础上,提出一种幅度调节型组合次级声源,这种组合源由两个单极子声源构成,单极子声源的间距远小于声波的波长。文中就组合次级源在自由场中对不同初级声源辐射噪声的控制进行理论分析和实验验证,并与同等条件下的单极子次级源控制系统的降噪性能进行了比较分析。数值计算和实验结果均表明,对于不同的初级声场,在次级通道数相同的情况下,组合次级源控制系统可以得到比单极子次级源控制系统高的降噪量。     

主动噪声控制声学通道的实验辨识

传统的自适应滤波器不能直接用于主动噪声控制，因为扬声器和误差传声器之间的声学通道可能使系统不稳定。本文根据声学通道的相应特性，建立补偿滤波器，提出了用实验方法辨识声学通道传输特性。在房间实验中研究了单通道相位因子的变化特性，并进一步用于飞机人多通道主动噪声控制，给出了相应的实验结果。     

调节水床效应的双梯度有源噪声控制自适应算法*

为了使自适应反馈有源噪声控制系统能够兼顾水床效应,通过约束次级信号的能量以调节噪声放大,设计了一种双梯度算法。当次级信号满足约束,算法沿着最小化误差信号能量的梯度方向迭代,反之,则沿着最小化次级信号能量的方向迭代。在有源降噪耳机实例中的对比结果表明,该算法能调节噪声放大并保持较大的降噪带宽,且运算量没有显著增加。     

Passive and active interior noise control of box structures using the structural intensity method

This paper presents passive and active vibro-acoustic noise control methods for attenuating the interior noise level in box structures which can be an analogy of cabins of vehicle and aircraft. The structural intensity (SI) approach is adopted to identify the predominant vibration panels and interior noise sources for box structures. In the study, the finite element method is used to determine the structural vibration and structural intensity in the box surfaces. According to structural intensity vectors plot and structural intensity stream lines presentation, the possible effective control positions where the dampers may be attached and the active control forces may act to reduce vibration and interior noise, are identified. From the study, it can be demonstrated that the structural intensity approach and stream line presentation are possible methods for identifying the vibro-acoustic interior noise source and predominant panels which may be modified to reduce the interior noise level. The structural intensity methodology, passive and active noise control results can be extended to the further study of the vibration and interior noise control of actual cabins of vehicles and aircraft.     

Adaptive Laguerre filters for active noise control

Feedforward controllers are used in many active noise control (ANC) systems to generate destructive interference in noise fields. An ideal feedforward ANC controller should have an infinite impulse response (IIR) transfer function, but most available feedforward ANC controllers have finite impulse responses (FIR) instead. The main reason is related to the adaptation algorithms of ANC systems. In general, adaptive FIR filters converge faster with guaranteed stability. In this study, the adaptive Laguerre filter is proposed and tested in an ANC application with positive experimental effects. The new ANC controller is an IIR filter, but its adaptation is similar to that of a FIR filter with fast convergence and guaranteed stability. Detailed explanations and analysis are presented in the main text.     

平板扬声器用于结构声有源噪声控制实验研究

对NXT技术的分布式平板扬声器和集中参数扬声器的频响和指向性等进行了对比测量，通过对组合平板扬声器的声场研究及有源消声实验，证明了平板扬声器用于有源噪声控制的可行性。综合平板扬声器和集中参数扬声器的物理特点和声场特性，根据基于平面声源有源噪声控制的已有的理论研究结果和本文的实验结果，可以认为，NXT平板扬声器适合作有源噪声控制的次级源，有利于有源噪声控制的工程推广应用。     

局域空间噪声主动控制技术的进展

低频噪声主动控制技术实现实用化，需要同时了解其在声学和电子控制方法上的可实现性，本文在系统的文献检索的基础上，综述了局域空间自适应噪声主动控制技术的发展，内容包括用次级声源控制室外局域噪声，围护结构内的局域空间和室外向室内传播的小范围区域空间噪声主动控制在声学上的限制（原理），以及各种控制策略和算法的应用，本文列出的文献包括了已有的重要研究成果，可为读者进一步了解该领域的研究提供详细的背景材料。     

空间有源消声实验研究

本文分别在半声室和普通房间进行有源消声实验，证明了作者以前提出的算法是收敛的，稳定的，以此算法构成的多通道有源消声系统对直达声和混响声都能进行了有效的控制。     

一种基于虚拟传感的无需误差传声器的自适应有源降噪方法*

该文基于虚拟传感技术引入了一种用于耳机的无需误差传声器的自适应有源降噪方法。该算法仅使用一个参考传声器实现了一种前馈和反馈自适应算法结合的有源降噪算法,提高了有源降噪稳定性,简化了耳机硬件结构。利用DSP平台实现了该文提出的方案,并通过实验验证了其良好的降噪性能和实用价值。     

Implementation of active noise control in a multi-modal spray dryer exhaust stack

Tonal noise emitted from large-diameter spray dryer exhaust stacks used in the dairy industry can give rise to complaints from nearby communities. In many cases, the tone at the fan blade passing frequency is characterized by a frequency above the first mode cut on frequency of the exhaust stack and both its amplitude and the frequency are time varying. The variation in amplitude is a result of turbulence and temperature variations in the duct which cause angular variations in the nodal plane of modes with diametrical nodes. This in turn results in large fluctuations in sound pressure with time at any specified location in the duct, thus presenting a significant challenge for an ANC system with fixed control source and error sensor locations. In many food processing industries, the use of sound absorptive materials in silencers is not acceptable and, particularly when the fan speed is variable, it is difficult to achieve an acceptable passive solution at a reasonable cost. Here, the design and implementation of an active noise control system for tonal noise propagating above the cut-on frequency of the first higher order mode in large size cylindrical industrial exhaust stack is discussed, where the frequency and amplitude vary significantly and relatively rapidly with time. Physical system design principles and control algorithm optimization for a practical active noise control system are presented. Finally, real time control results which were achieved by a prototype installation on a large-diameter, in-service exhaust stack are given. Significant noise reductions were achieved in the community.     

Design and experimental tests of active control barriers for low-frequency stationary noise reduction in urban outdoor environment

Active noise control (ANC) techniques are based on the emission of an antiphase signal in order to cancel the noise produced by a primary source. ANC has been successfully applied especially for reducing noise in confined environments, such as headphones and ducts. In this study, we present an application of ANC concepts to the design of an anti-noise barrier for an outdoor environment and its experimental testing. Even though passive techniques are effective in noise reduction at middle-high frequencies, they become less efficient at low frequencies (below 300 Hz) due to the limited dimensions of commonly deployable barriers. In this paper, we analyze the properties of a low-cost active noise system able to efficiently operate on stationary, almost pure-tone, low-frequency noise, such as that produced by electrical transformers and reactors in power and transformation plants. A prototype has been implemented and on-the-field experimental tests have been carried out. The results (confirmed also by numerical simulations) demonstrate a remarkable efficiency in the far field, with a reduction up to 15 dB with respect to the absence of the ANC system.