Tunable drug release from hydrolytically degradable layer-by-layer thin films

The development of new thin film fabrication techniques that allow for precise control of degradation and drug release properties could represent an important advance in the fields of drug delivery and biomedicine. Polyelectrolyte layer-by-layer (LBL) thin films can be assembled with nanometer scale control over spatial architecture and morphology, yet very little work has focused on the deconstruction of these ordered thin films for controlled release applications. In this study, hydrolytically degradable LBL thin films are constructed by alternately depositing a degradable poly(beta-amino ester) (polymer 1) and a series of model therapeutic polysaccharides (heparin, low molecular weight heparin, and chondroitin sulfate). These films exhibit pH-dependent, pseudo-first-order degradation and release behavior. The highly versatile and tunable properties of these materials make them exciting candidates for the controlled release of a wide spectrum of therapeutics.     

Hierarchical Co‐Assembly Enhanced Direct Ink Writing

Integrating intelligent molecular systems into 3D printing materials and transforming their molecular functions to the macroscale with controlled superstructures will unleash great potential for the development of smart materials. Compared to macromolecular 3D printing materials, self‐assembled small‐molecule‐based 3D printing materials are very rare owing to the difficulties of facilitating 3D printability as well as preserving their molecular functions macroscopically. Herein, we report a general approach for the integration of functional small molecules into 3D printing materials for direct ink writing through the introduction of a supramolecular template. A variety of inorganic and organic small‐molecule‐based inks were 3D‐printed, and their superstructures were refined by post‐printing hierarchical co‐assembly. Through spatial and temporal control of individual molecular events from the nano‐ to the macroscale, fine‐tuned macroscale features were successfully installed in the monoliths.     

Electroconductive Green Metal-polyaniline Nanocomposites: Synthesis and Application in Sensors

Polyaniline (PANI) is one of the most extensively used conducting polymer due to its fascinating properties including conducting, thermal, optical, magnetic and electrochemical properties, simple synthesis procedure and low cost of monomer. It has attracted major attention in a variety of applications including electrochemical sensors, catalysts, supercapacitors and biosensors. However, its limitations such as insolubility in common solvents, low process-ability and poor mechanical properties have led to the development of new approaches to improve it properties. Metal nanoparticles (MNPs) such as silver, gold, copper and palladium have been combined with PANI to improve on its properties which has led to a new class of materials known as metal/PANI nanocomposites. These hybrid nanocomposites incorporate advantages of both MNPs and polymers which effectively improves the properties of the individual materials. Various synthesis techniques including in situ polymerization, ɤ-radiolysis, electrodeposition, complexation, vacuum deposition and interfacial polymerization have been used in the formation of metal/PANI nanocomposites. These nanocomposites have been used in various sensor and biosensor applications due to their excellent conductivity, ease of synthesis, excellent redox potentials, chemical and thermal stability. This review highlights the various metal/PANI nanocomposites, their various synthesis techniques and their application in sensors and biosensors. The importance of these nanocomposites in sensing and signaling various toxic heavy metals such as mercury, lead and silver and toxic gases such as hydrogen sulphide, ammonia and chloroform has been discussed. In addition the review covers the applications of metal/PANI nanocomposites in biosensor systems for the detection of glucose, DNA, protein, cholesterol, drugs and hydrogen peroxide.     

The design and fabrication of Co_3O_4/Co_3V_2O_8/Ni nanocomposites as high-performance anodes for Li-ion batteries

The Co_3O_4/Co_3V_2O_8/Ni nanocomposites were rationally designed and prepared by a two-step hydrothermal synthesis and subsequent annealing treatment. The one-dimensional(1D) Co_3O_4 nanowire arrays directly grew on Ni foam, whereas the 1D Co_3V_2O_8 nanowires adhered to parts of Co_3O_4 nanowires.Most of the hybrid nanowires were inlayed with each other, forming a 3D hybrid nanowires network.As a result, the discharge capacity of Co_3O_4/Co_3V_2O_8/Ni nanocomposites could reach 1201.8 mAh/g after100 cycles at 100 mA/g. After 600 cycles at 1 A/g, the discharge capacity was maintained at 828.1 mAh/g.Moreover, even though the charge/discharge rates were increased to 10 A/g, it rendered reversible capacity of 491.2 mAh/g. The superior electrochemical properties of nanocomposites were probably ascribed to their unique 3D architecture and the synergistic effects of two active materials. Therefore, such Co_3O_4/Co_3V_2O_8/Ni nanocomposites could potentially be used as anode materials for high-performance Li-ion batteries.     

Mesosynthesis of ZnO-silica composites for methanol nanocatalysis

Methanol catalysis meets chemistry under confined conditions. Methanol is regarded as one of the most important future energy sources. ZnO/Cu composite materials are very effective in heterogeneous catalysis for methanol production due to the so-called strong metal-support interaction effect (SMSI). Therefore, materials of superior structural design potentially representing model systems for heterogeneous catalysis are highly desired. Ultimately, such materials could help to understand the interaction between copper and zinc oxide in more detail than currently possible. We report the preparation of nanocrystalline, size-selected ZnO inside the pore system of ordered mesoporous silica materials. A new, liquid precursor for ZnO is introduced. It is seen that the spatial confinement significantly influences the chemical properties of the precursor as well as determines a hierarchical architecture of the final ZnO/SiO(2) nanocomposites. Finally, the ability of the materials to act as model systems in methanol preparation is investigated. The materials are characterized by a variety of techniques including electron microscopy, X-ray scattering, solid-state NMR, EPR, EXAFS, and Raman spectroscopy, and physisorption analysis.     

Exfoliation of 2D Materials for Energy and Environmental Applications

The fascinating properties of single-layer graphene isolated by mechanical exfoliation have inspired extensive research efforts toward two-dimensional (2D) materials. Layered compounds serve as precursors for atomically thin 2D materials (briefly, 2D nanomaterials) owing to their strong intraplane chemical bonding but weak interplane van der Waals interactions. There are newly emerging 2D materials beyond graphene, and it is becoming increasingly important to develop cost-effective, scalable methods for producing 2D nanomaterials with controlled microstructures and properties. The variety of developed synthetic techniques can be categorized into two classes: bottom-up and top-down approaches. Of top-down approaches, the exfoliation of bulk 2D materials into single or few layers is the most common. This review highlights chemical and physical exfoliation methods that allow for the production of 2D nanomaterials in large quantities. In addition, remarkable examples of utilizing exfoliated 2D nanomaterials in energy and environmental applications are introduced.     

Layer‐by‐Layer Assembly for Surface Tethering of Thin‐Hydrogel Films: Design Strategies and Applications

Manipulation and engineering of the surfaces has a key role in improving the materials properties. Anchoring of thin hydrogels on the materials surface is one of the recently developed methods to achieve surfaces with high potential applications. Layer‐by‐layer (LBL) has been used widely as a strong strategy for immobilization of thin hydrogel films on the surface of various organic/inorganic substrates. Electrostatic LBL and covalent LBL are two main strategies used in this regard. In electrostatic LBL, negatively and positively hydrophilic polymers are sequentially assembled to create a multilayer hydrogel which subsequent covalent crosslinking of multilayers improved the stability of the inserted layers. On the other hand, covalent LBL requires hydrophilic polymers bearing reactive telechelic groups. These reactive polymers are prepared by various polymerization techniques or by post‐functionalization of biopolymers. The principles of hydrogel anchoring have described along with representative examples. Besides, the potential applications of the modified surfaces in specific cases have been addressed and overviewed.     

Cellulose nanomaterial reinforced polymer nanocomposites

Several forms of cellulose nanomaterials, notably cellulose nanocrystals and cellulose nanofibrils, exhibit attractive properties and are potentially useful for a large number of industrial applications. These include the paper and cardboard industry, use as reinforcing filler in polymer nanocomposites, basis for low-density foams, additive in adhesives and paints, as well as a wide variety of filtration, electronic, food, hygiene, cosmetic, and medical products. This entry focuses on cellulose materials as filler in polymer nanocomposites. The ensuing mechanical properties obviously depend on the type of nanomaterial used, but the crucial point is the processing technique. The emphasis is on the melt processing of such nanocomposite materials that has not yet been properly resolved and remains a challenge.     

Chitosan-based nanocomposites for medical applications

Chitosan as a biobased polymer is gaining increasing attention due to its extraordinary physico-chemical characteristics and properties. While a primary use of chitosan has been in horticultural and agricultural applications for plant defense and to increase crop yield, recent research reports display various new utilizations in the field of advanced biomedical devices, targeted drug delivery, and as bioimaging sensors. Chitosan possesses multiple characteristics such as antimicrobial properties, stimuli-responsiveness, tunable mechanical strength, biocompatibility, biodegradability, and water-solubility. Further, chitosan can be processed into nanoparticles, nano-vehicles, nanocapsules, scaffolds, fiber meshes, and 3D printed scaffolds for a variety of applications. In recent times, nanoparticles incorporated in chitosan matrices have been identified to show superior biological activity, as cells tend to proliferate/differentiate faster when they interact with nanocomposites rather than bulk or micron size substrates/scaffolds. The present article intents to cover chitosan-based nanocomposites used for regenerative medicine, wound dressings, drug delivery, and biosensing applications.     

In-situ synthesis of 3D printable mono- and Bi-metallic (Cu/Ag) nanoparticles embedded polymeric structures with enhanced electromechanical properties

The interest of additive manufacturing with 3D printing increases day by day, which provides improved mechanical, electrical, magnetic and thermal properties of 3D parts. The production of 3D parts with the stereolithography (SLA) method, which allows it to be produced with high precision, resolution and complex geometries, distinguishes itself from other alternative additive manufacturing methods (FDM. SLS. LOM. LMD etc.). However, studies on the preparation of functional 3D polymer nanocomposites with the SLA method are quite limited. This study aims to produce silver (Ag) and/or copper (Cu) based 3D polymer nanocomposites for enhancing its mechanical strength, thermal stability and electrical conductivity. Mono and bimetallic (Cu/Ag) nanoparticles have been in-situ synthesized by selective irradiation of laser beam method using a commercial SLA device. In this method, metal (Cu/Ag) acrylate containing photocurable resin is not only cured but also leads to thermal decomposition of metal ions into nanoparticles to form functional 3D structures. The mechanical, electrical and thermal properties of polymer nanocomposites are characterized in detail. As a result of the analysis, the nanoparticles, with an average diameter of 25–55 nm, are well dispersed in the polymer matrix without agglomeration. The temperature at which 5% weight loss of Ag and Cu based polymer structures is measured as 179.3 °C while the glass transition temperature is found to be 223.81 °C. Most importantly, the resistance values are significantly decreased from 456.62 GΩ (Gigaohm) to 1.50 GΩ by increasing the amount of Ag addition at 3D polymeric structures. Therefore, this study allows the production of polymer nanocomposites not only in complex structures but also in desired properties especially for electrically conductive materials, capacitors and electronic applications.     

Self‐Assembly of MXene‐Surfactants at Liquid–Liquid Interfaces: From Structured Liquids to 3D Aerogels

2D transition metal carbides and nitrides (MXenes), a class of emerging nanomaterials with intriguing properties, have attracted significant attention in recent years. However, owing to the highly hydrophilic nature of MXene nanosheets, assembly strategies of MXene at liquid–liquid interfaces have been very limited and challenging. Herein, through the cooperative assembly of MXene and amine‐functionalized polyhedral oligomeric silsesquioxane at the oil–water interface, we report the formation, assembly, and jamming of a new type MXene‐based Janus‐like nanoparticle surfactants, termed MXene‐surfactants (MXSs), which can significantly enhance the interfacial activity of MXene nanosheets. More importantly, this simple assembly strategy opens a new platform for the fabrication of functional MXene assemblies from mesoscale (e.g., structured liquids) to macroscale (e.g., aerogels), that can be used for a range of applications, including nanocomposites, electronic devices, and all‐liquid microfluidic devices.     

Novel conductive nanocomposites from perfluoropolyether waterborne polyurethanes and carbon nanotubes

The exceptional electrical conductivity of carbon nanotubes (CNTs) has been exploited for the preparation of conductive nanocomposites based on a large variety of insulating polymers. Among these, perfluoropolyether‐polyurethanes (PFPE‐PUs) represent a class of highly performing fluorinated materials with excellent water/oil repellency, chemical resistance, and substrate adhesion. The incorporation of highly conductive fillers to this class of highly performing materials allows them to be exploited in new technological and industrial fields where their unique properties need to be combined with the electrical conductivity or the electrostatic dissipation properties of carbon nanotubes. However, no studies have been presented so far on nanocomposites based on PFPE‐PUs and CNTs. In this work, polymer nanocomposites based on waterborne PFPE‐PUs and increasing amounts of carboxylated multiwall CNTs (COOH‐CNTs) were prepared and characterized for the first time. The effect of increasing concentration of COOH‐CNTs on the physical, mechanical, and surface properties of the nanocomposites was investigated by means of rheological measurements, dynamic mechanical analysis, thermal characterization, optical contact angle measurements, and scanning electron microscopy. In addition, electrical measurements showed that the highly insulating undoped PFPE‐PU system undergoes substantial modifications upon addition of COOH‐CNTs, leading to the formation of conductive nanocomposites with electrical conductivities as high as 1 S/cm. The results of this study demonstrate that the addition of COOH‐CNTs to PFPE‐PU systems represents a promising strategy to expand their possible use to technological applications where chemical stability, water/oil repellence and electrical conductivity are simultaneously required. Copyright © 2014 John Wiley & Sons, Ltd.     

树形大分子/金属配合物及其纳米复合材料的制备与性能研究进展

树形大分子是具有确定代数和末端基的蓬勃发展的新型合成高分子。大量具有不同的中心核、支链和末端基团的树形大分子已经被合成和应用于不同的领域,其功能化和应用是目前树形大分子研究领域的热点。本文综述了树形大分子/金属配合物及其纳米复合材料的制备与性能的研究进展,重点介绍了树形大分子/金属配合物材料和树形大分子/金属纳米复合材料的制备与性能研究的最新进展。     

表面引发聚合反应研究进展

表面引发聚合反应作为一种新的聚合反应可广泛应用于固体基底的表面修饰与改性。结合分子自组装技术,几乎各种类型的聚合反应都有可能在固体基底表面进行。本文对表面引发聚合反应的研究进展进行了综述,对反应类型、实验方法、研究动向以及在合成聚合物刷、形成图案化聚合物薄膜等方面的应用与发展前景作了介绍与讨论。     

Graphene‐polymer nanocomposites for biomedical applications

Despite the significant efforts in the synthesis of new polymers, the mechanical properties of polymer matrices can be considered modest in most cases, which limits their application in demanding areas. The isolation of graphene and evaluation of its outstanding properties, such as high thermal conductivity, superior mechanical properties, and high electronic transport, have attracted academic and industrial interest, and opened good perspectives for the integration of graphene as a filler in polymer matrices to form advanced multifunctional composites. Graphene‐based nanomaterials have prompted the development of flexible nanocomposites for emerging applications that require superior mechanical, thermal, electrical, optical, and chemical performance. These multifunctional nanocomposites may be tailored to synergistically combine the characteristics of both components if proper structural and interfacial organization is achieved. The investigations carried out in this aim have combined graphene with different polymers, leading to a variety of graphene‐based nanocomposites. The extensive research on graphene and its functionalization, as well as polymer graphene composites, aiming at applications in the biomedical field, are reviewed in this paper. An overview of the polymer matrices adequate for the biomedical area and the production techniques of graphene composites is presented. Finally, the applications of such nanocomposites in the biomedical field, particularly in drug delivery, wound healing, and biosensing, are discussed.     

表面配位金属-有机框架薄膜HKUST-1在光电应用中的研究进展北大核心CSCD

金属-有机框架(MOFs)作为一种无机-有机杂化材料,由于其结构的多样性和独特的功能而在众多领域有着潜在的应用价值。尤其是液相外延层层组装的MOFs薄膜(称为表面配位MOFs薄膜,SURMOFs)因其具有可控的厚度、优选的生长取向以及均匀的表面等优点备受关注。本文总结了液相外延(LPE)层层组装MOFs薄膜的技术方法,如层层浸渍法、层层泵式法、层层喷雾法、层层旋涂法等组装方法,并介绍了经典的SURMOF HKUST-1的层层组装策略以及其在光致发光、光致变色、光催化以及电催化方面的相关应用。HKUST-1是经典的SURMOF材料之一,在光电领域具有广泛的应用,SURMOF HKUST-1具有以下独特的性能:可以作为发光载体实现良好的光学性能;具有独特的Cu催化活性位点的优势,有效地降解水中的污染物;因其具有介电特性而在电子器件方面有着潜在的应用。虽然HKUST-1在许多方面均具有独特的性能,但也面临着一些挑战:需要将薄膜的合成步骤简单化;薄膜结构和电催化行为间的机理也需要进一步的研究;降低HKUST-1的内阻的方法也需要进行改进。SURMOFs在大规模工业应用和扩展到其它未探索的领域还任重道远。     

Role,effect, and influences of micro and nano‐fillers on various properties of polymer matrix composites for microelectronics: A review

Ever since the discovery of polymer composites, its potential has been anticipated for numerous applications in various fields such as microelectronics, automobiles, and industrial applications. In this paper, we review filler reinforced polymer composites for its enormous potential in microelectronic applications. The interface and compatibility between matrix and filler have a significant role in property alteration of a polymer nanocomposites. Ceramic reinforced polymeric nanocomposites are promising candidate dielectric materials for several micro‐ and nano‐electronic devices. Because of its synergistic effect like high thermal conductivity, low thermal expansion, and dielectric constant of ceramic fillers with the polymer matrix, the resultant nanocomposites have high dielectric breakdown strength. The thermal and dielectric properties are discussed in the view of filler alignment techniques and its effect on the composites. Furthermore, the effect of various surface modified filler materials in polymer matrix, concepts of network forming using filler, and benefits of filler alignment are also discussed in this work. As a whole, this review article addresses the overall view to novice researchers on various properties such as thermal and dielectric properties of polymer matrix composites and direction for future research to be carried out.     

Dependence of the Properties of 2D Nanocomposites Generated by Covalent Crosslinking of Nanosheets on the Interlayer Separation: A Combined Experimental and Theoretical Study

Covalently cross-linked heterostructures of 2D materials are a new class of materials which possess electrochemical and photochemical hydrogen evolution properties. It was of considerable interest to investigate the role of interlayer spacing in the nanocomposites involving MoS₂ and graphene sheets and its control over electronic structures and catalytic properties. We have investigated this problem with emphasis on the hydrogen evolution properties of these structures by a combined experimental and theoretical study. We have linked MoS₂ based nanocomposites with other 2D materials with varying interlayer spacing by changing the linker and studied their hydrogen evolution properties. The hydrogen evolution activity for these composites decreases with increasing linker length, which we can link to a decrease in magnitude of charge transfer across the layers with increasing interlayer spacing. Factors such as the nature of the sheets, interlayer distance as well as the nature of the linker provide pathways to tune the properties of covalently cross-linked 2D material rendering this new class of materials highly interesting.     

Silicon-containing polymer-derived ceramic nanocomposites (PDC-NCs): preparative approaches and properties

Composites consist by definition of at least two materials (Gibbsian phases) with rather different properties. They exhibit a heterogeneous microstructure and possess improved properties with respect to their components. Furthermore, the design of their microstructure allows for tailoring their overall properties. In the last decades, intense work was performed on the synthesis of nanocomposites, which have the feature that at least one of their components is nanoscaled. However, the microstructure-property relationship of nanocomposite materials is still a challenging topic. This tutorial review paper deals with a special class of nanocomposites, i.e. polymer-derived ceramic nanocomposites (PDC-NCs), which have been shown to be promising materials for various structural and functional applications. Within this context, different preparative approaches for PDC-NCs as well as some of their properties will be presented and discussed. Furthermore, recent results concerning the relationship between the nano/microstructure of PDC-NCs and their properties will be highlighted.     

Saddle-Shaped Building Blocks: A New Concept for Designing Fully Conjugated 3D Organic Semiconducting Materials

Currently, most organic semiconducting materials (OSMs) are π-conjugated structures in one or two dimension (2D), where the lack of layer-layer π-conjugation connection greatly blocks their electron delocalization and transport. The 3D fully conjugated materials could solve this issue because they can provide efficient charge-transport pathways throughout the whole 3D skeleton, in which the suitable 3D building block is the key to the development of fully conjugated 3D OSMs. Cyclooctatetraene (COT) and its derivatives are good candidates due to their π-conjugation with 3D saddle-shaped architecture. In this Concept, we discuss the key features of saddle-shaped COT-based derivatives and their synthetic strategy, then we present the current development of using the COT derivatives as building blocks to construct the 3D fully conjugated organic small compound- and polymer-based OSMs. The properties and perspectives of these OSMs in photovoltaics, electro-catalysis and electrical conductivities are also discussed. These recent advances in the developing 3D fully conjugated materials could potentially open up a new frontier in the design of OSMs.