Viscosity behavior of silica suspensions flocculated by associating polymers

Associating polymers are hydrophilic long-chain molecules containing a small number of hydrophobic groups, and act as flocculants in aqueous suspensions. The effects of associating and nonassociating polymers on viscosity behavior are studied for silica suspensions. Since flocculation is induced by polymer bridging, the viscosity behavior is converted from Newtonian to shear-thinning profiles. The additions of surfactant cause an increase in viscosity for suspensions prepared with associating polymer, whereas the flow behavior of suspensions with nonassociating polymer is not significantly influenced. In adsorption of associating polymers onto silica particles, the chain may adopt a conformation with a water-soluble backbone attached to the particle surfaces. The hydrophobic groups extending from the chains adsorbed onto different particles can form a micelle by association with surfactant. Therefore, the bridging flocculation is enhanced by surfactant. The cooperative micellar formation between associating polymer and surfactant is responsible for viscosity increase in suspensions.     

Size effect on the rheological behavior of nanoparticle suspensions in associating polymer solutions

Associating polymers are hydrophilic long-chain molecules containing a small amount of hydrophobic groups and tend to create bonds between chains by reversible associating interactions. The effects of associating polymer on the steady-shear viscosity and dynamic viscoelasticity are studied for suspensions of silica nanoparticles with diameters of 8, 18, and 25 nm. The silica particles of 8 nm are entrapped in the transient network of associating polymer by reversible adsorption. The enhancement of network results in the high viscosity with a Newtonian flow profile in the limit of zero shear rate. In suspensions of 25 nm silica, the hydrophobes extending from the chains adsorbed onto different particles can form a micelle by association interactions. The multichain bridging gave rise to the shear-thinning flow and high storage modulus at low frequencies. The suspensions of 25 nm silica are characterized as flocculated systems. Because of intermediate curvature, the flexible bridges are formed between silica particles of 18 nm. When the flexible bridges are highly extended within the lifetime in shear fields, the suspensions show shear-thickening flow. The shear-thickening flow can be attributed to the elastic effect of flexible bridges.     

Effect of associating polymer on the viscosity behavior of suspensions consisting of particles with different surface properties

Associating polymers which consist of water-soluble long-chain molecules containing a small fraction of hydrophobic groups (hydrophobes) behave as flocculants in aqueous suspensions. The effects of associating polymers on the rheological behavior are studied for single suspensions of particles with hydrophilic and hydrophobic surfaces, and their mixtures. For particles with hydrophilic surfaces, the suspensions are highly flocculated by a bridging mechanism, because the water-soluble chains adsorb onto hydrophilic surfaces. On the other hand, the particles with hydrophobic surfaces cannot be dispersed in water without polymer and the additions of a small amount of polymer are required for preparation of homogeneous suspensions. The associating polymer acts as a dispersant at low concentrations. However, further additions of polymer lead to a drastic increase in viscosity. Since the hydrophobes on one end of molecules adsorb onto hydrophobic surfaces and other hydrophobes tending from the particles can form micelles, the particles are connected by linkage of interchain associations. By mixing two suspensions of particles with hydrophilic and hydrophobic surfaces, the viscosity is substantially reduced and the flow becomes nearly Newtonian. The associating polymer in complex suspensions acts as a binder between the hydrophilic and hydrophobic surfaces. The hetero-flocculation which leads to the formation of composite particles may be responsible for the viscosity reduction of complex suspensions.     

Coupling between polymer adsorption and colloidal particle aggregation

Studies of the adsorption of high molecular weight polymers on colloidal latex and silica particles and their subsequent flocculation were carried out. Neutral polyethylene oxide samples with both a narrow and a broad molecular weight distribution were used together with low charged cationic copolymers. The influence of the particle concentration and polymer dose on the flocculation were systematically investigated under quiescent conditions.Equilibrium bridging only occurred with polyelectrolyte, even in very dilute suspensions, at high particle coverage. In contrast to this, non-equilibrium bridging occurred with both neutral polymer and polyelectrolytes but only for more concentrated suspensions and small amounts of adsorbed polymer. Polymer adsorption in dilute suspensions, which did not show particle aggregation was measured an electrophoretic technique. In more concentrated suspensions, where flocculation takes place, we found that aggregation prevents further polymer adsorption and induces both an excluded volume and a surface effect. The consequences on the shape of the isotherms differ according to the aggregation mechanism.A significant decrease of the amount, , of adsorbed polymer is observed with non-equilibrium bridging. When both mechanisms simultaneously contribute to the aggregation, the value of depends on their relative importance. In the intermediate range of copolymer dose their respective contributions are critically sensitive to the details of the mixing step and stirring, leading to non reproducible experimental results.     

Influence of adsorbed polymers on the removal of mineral particles from a planar surface

 Experimental results on the role of adsorbed polymers on the particle adhesion are presented. Both Brownian (silica particles) and non-Brownian (glass beads) particles were used. The particles were deposited onto the internal surface of a glass parallelepiped cell, and then submitted to increasing laminar flow rates. The pH and the ionic strength of the electrolytes were fixed. The adhesive force was related to the hydrodynamic force required to dislodge 50% of the initially attached beads. We found that high molecular weight PEO had little effect on the adhesion of small silica beads due to the low affinity of the polymer for silica or glass surfaces. On the contrary, PEO greatly enhanced the adhesion of bigger glass beads forced to deposit on the capillary surface because of gravity. The increase was all the more pronounced as the molecular weight of the polymer was high. The effect of high molecular weight cationic copolymers on the adhesion of silica particles was drastic. The maximal force (1500 pN) applied by the device could not enable any particle detachment even using polymers of low cationicity rate (5%), showing the efficiency of electrostatic attractions. When copolymers were adsorbed on both surfaces (particles and plane), the adhesive force exhibited a maximum at intermediate coverage of particles. This optimum was related to the optimum flocculation concentration classically observed in flocculation of suspensions by polymers. Received: 16 February 1996 Accepted: 10 September 1996     

Flocculation mechanism induced by cationic polymers investigated by light scattering

Three cationic polymers with molecular weights and charge densities of 3.0 x 10(5) g/mol and 10%, 1.1 x 10(5) g/mol and 40%, and 1.2 x 10(5) g/mol and 100% were chosen as flocculants to aggregate silica particles (90 nm), under various conditions, including change in polymer dosage, particle concentration, background electrolyte concentration, and shear rate. The size and structure of flocs produced were determined using the static light scattering technique. On the basis of measurements of polymer adsorption and its effect on the zeta potential and floc properties, it has been found that the polymer charge density plays an important role in determining the flocculation mechanism. Polymers with a 10% charge density facilitate bridging, 40% charged polymers bring about either a combination of charge neutralization and bridging or bridging, depending on the polymer dosage, and polymers with the charge density of 100% induce electrostatic patch flocculation mechanism at the optimum polymer dosage and below but bring about bridging mechanism at the polymer dosage approaching the adsorption plateau value. Bridging aggregation can readily be affected by the particle concentration, and an increase in particle concentration results in the formation of larger but looser aggregates, whereas electrostatic patch aggregation is independent of particle concentration. The addition of a background electrolyte aids in bridging aggregation while it is detrimental to electrostatic patch aggregation. It has also been found that the effect of shear rate on the mass fractal dimension depends on polymer charge density.     

Adsorption of comb copolymers on weakly attractive solid surfaces

In this work continuum and lattice Monte Carlo simulation methods are used to study the adsorption of linear and comb polymers on flat surfaces. Selected polymer segments, located at the tips of the side chains in comb polymers or equally spaced along the linear polymers, are attracted to each other and to the surface via square-well potentials. The rest of the polymer segments are modeled as tangent hard spheres in the continuum model and as self-avoiding random walks in the lattice model. Results are presented in terms of segment-density profiles, distribution functions, and radii of gyration of the adsorbed polymers. At infinite dilution the presence of short side chains promotes the adsorption of polymers favoring both a decrease in the depletion-layer thickness and a spreading of the polymer molecule on the surface. The presence of long side chains favors the adsorption of polymers on the surface, but does not permit the spreading of the polymers. At finite concentration linear polymers and comb polymers with long side chains readily adsorb on the solid surface, while comb polymers with short side chains are unlikely to adsorb. The simple models of comb copolymers with short side chains used here show properties similar to those of associating polymers and of globular proteins in aqueous solutions, and can be used as a first approximation to investigate the mechanism of adsorption of proteins onto hydrophobic surfaces.     

Dispersion stabilities and rheological properties of fumed silica suspensions

Herein, we have reviewed fumed silica suspensions in dispersing fluids, polymer melts, and polymer solutions, focusing on their dispersion stability and rheological properties as a function of the surface character of fumed silica powders and the silica volume fraction, ?. Hydrophilic fumed silica powders are well dispersed at ? < 0.01 in polar dispersing fluids or polar polymer melts, and their phase states change from sol to gel with increasing ?. Such changes should also be strongly related to the rheological responses of the hydrophilic fumed silica suspensions, which change from Newtonian flow behavior to gel-like elasticity with increasing ?. On the other hand, hydrophobic fumed silica powders are stabilized in both polar and nonpolar dispersing fluids, depending on the interactions between the surface hydrophobic moieties and the dispersing fluids, in addition to those between the residual surface silanol groups and dispersing fluid, except for the particle–particle interactions. Moreover, the effects of the adsorption and desorption of polymers, as well as of non-adsorbing polymers on the dispersion stability and rheological behavior of fumed silica suspensions are discussed, by taking account of their optical microscopic observation and SANS curves.     

Surface chemistry and rheology of polysulfobetaine-coated silica

We have measured the viscosity of suspensions of colloidal silica particles (d = 300 nm) and the properties of silica surfaces in solutions of a polymer consisting of zwitterionic monomer groups, poly(sulfobetaine methacrylate), polySBMA. This polymer has potential use in modifying surface properties because the polymer is net uncharged and therefore does not generate double-layer forces. The solubility of the polymer can be controlled and varies from poor to good by the addition of sodium chloride salt. Ellipsometry was used to demonstrate that polySBMA adsorbs to silica and exhibits an increase in surface excess at lower salt concentration, which is consistent with a smaller area per molecule at low salt concentration. Neutron reflectivity measurements show that the adsorbed polymer has a thickness of about 3.7 nm and is highly hydrated. The polymer can be used to exercise considerable control over suspension rheology. When silica particles are not completely covered in polymer, the suspension produces a highly viscous gel. Atomic force microscopy was used to show this is caused by bridging of polymer between the particles. At higher surface coverage, the polymer can produce either a high or very low viscosity slurry depending on the sodium chloride concentration. At high salt concentration, the suspension is stable, and the viscosity is lower. This is probably because the entrainment of many small ions renders the polymer film highly hydrophilic, producing repulsive surface forces and lubricating the flow of particles. At low salt concentrations, the polymer is barely soluble and more densely adsorbed. This produces less stable and more viscous solutions, which we attribute to attractive interactions between the adsorbed polymer layers.     

Dispersions of nanocrystalline cellulose in aqueous polymer solutions: structure formation of colloidal rods

The steady-state shear and linear viscoelastic deformations of semidilute suspensions of rod-shaped nanocrystalline cellulose (NCC) particles in 1.0% hydroxyethyl cellulose and carboxymethyl cellulose solutions were investigated. Addition of NCC at the onset of semidilute suspension concentration significantly altered the rheological and linear viscoelastic properties of semidilute polymer solutions. The low-shear viscosity values of polymers solutions were increased 20-490 times (depending on polymer molecular weight and functional groups) by the presence of NCC. NCC suspensions in polymer solutions exhibited yield stresses up to 7.12 Pa. Viscoelasticity measurements also showed that NCC suspended polymer solutions had higher linear elastic moduli than the loss moduli. All of those results revealed the gel formation of NCC particles and presence of internal structures. The formation of a weak gel structure was due to the nonadsorbing macromolecules which caused the depletion-induced interaction among NCC particles. A simple interaction energy model was used to show successfully the flocculation of NCC particles in the presence of nonadsorbing polymers. The model is based on the incorporation of the depletion interaction term between two parallel plates into the DLVO theory for cubic prismatic rod shaped NCC particles.     

Computer Simulation of Bridging Flocculation Processes: The Role of Colloid to Polymer Concentration Ratio on Aggregation Kinetics

The flocculation of colloidal particles by adsorbing polymers is one of the central issues of colloid science and a very important topic in many industrial, biological, and environmental processes. We report a computer simulation study of a 2- and 3-dimensional model for bridging flocculation betweenlarge linear polymer chains and comparatively small colloidal particles,where the structure and growth kinetics of cluster formation are investigated. This model was developed within the framework of the cluster–cluster aggregation model using mass and fractal dimension dependent diffusion constants, where bridging flocculation is seen as a case of heterocoagulation in which, in addition, macromolecule configurations and lengths play an important role. The simulation of aggregate structure and formation kinetics obtained at different (i) relative particle concentrations, (ii) polymer chain conformations, and (iii) sticking probabilities are described from a qualitatively and quantitative point of view. The results suggest that the formation of large aggregates is a slow process, controlled by the reactivity of the clusters, even when the reaction between microcolloids and macrochains is very fast. Aggregation kinetics are strongly dependent on the particle/chain concentration ratio and on the configurational properties of the chains. It is shown that the scaling laws which are valid for homocoagulation processes are also applicable to the kinetics of bridging flocculation. The corresponding scaling exponents have been calculated.     

Flow-Induced Anisotropy in Mixtures of Associative Polymers and Latex Particles

The effect of associative polymers on the structure and rheological behavior of colloidal suspensions is discussed. Adding associative polymer is known to increase the viscosity of the suspensions. At high shear rates the increase is close to what could be expected on the basis of the hydrodynamic effects of the added polymer. At low shear rates the viscosity increases much more. Small-angle light scattering (SALS) during flow is used here to investigate the underlying structural mechanisms. The SALS patterns indicate that the associative polymer changes the particulate structure: characteristic butterfly patterns appear even at relatively low particle volume fractions. They are not present in the suspensions without associative polymer. The patterns indicate that fluctuations in particle concentration are more pronounced in the flow direction than in the vorticity direction and that anisotropic particulate structures with an orientation along the vorticity direction develop. The evolution of their characteristic length scale during flow has been followed over time. Changing the hydrophilic part of the polymer from polyacrylamide to polyacrylic acid induces stronger associative interactions. In the suspensions this results in a reduction of the relative viscosity rather than an increase. The difference in degree of associativity between the polymers also has an effect on the SALS patterns in the suspensions both at rest and during flow. The rheology as well as the SALS suggest the presence of a strong polymer network in the second system. The competition between adsorption of the associative polymer on the particles with the intermolecular associations between the polymer chains seems to be responsible for the observed differences. Copyright 2000 Academic Press.     

Synergistic stabilization of emulsions by a mixture of surface-active nanoparticles and surfactant

The stability and rheology of tricaprylin oil-in-water emulsions containing a mixture of surface-active hydrophilic silica nanoparticles and pure nonionic surfactant molecules are reported and compared with those of emulsions stabilized by each emulsifier alone. The importance of the preparation protocol is highlighted. Addition of particles to a surfactant-stabilized emulsion results in the appearance of a small population of large drops due to coalescence, possibly by bridging of adsorbed particles. Addition of surfactant to a particle-stabilized emulsion surprisingly led to increased coalescence too, although the resistance to creaming increased mainly due to an increase in viscosity. Simultaneous emulsification of particles and surfactant led to synergistic stabilization at intermediate concentrations of surfactant; emulsions completely stable to both creaming and coalescence exist at low overall emulsifier concentration. Using the adsorption isotherm of surfactant on particles and the viscosity and optical density of aqueous particle dispersions, we show that the most stable emulsions are formed from dispersions of flocculated, partially hydrophobic particles. From equilibrium contact angle and oil-water interfacial tension measurements, the calculated free energy of adsorption E of a silica particle to the oil-water interface passes through a maximum with respect to surfactant concentration, in line with the emulsion stability optimum. This results from a competition between the influence of particle hydrophobicity and interfacial tension on the magnitude of E.     

Organo-modified cationic silica nanoparticles/anionic polymer as flocculants

The synthesis of quaternized silica nanoparticles and its application to fine clay flocculation were investigated. N-trimethoxysilylpropyl-N,N,N-trimethylammonium chloride was used as a cationic reagent to introduce quaternary amine groups onto the surfaces of silica nanoparticles via the formation of covalent bonds between the methoxy groups of the cationic reagents and the silanol groups in the silica surface. The zeta potential, zeta, and charge density of the silica particles modified under various reaction conditions were determined. Dynamic clay flocculation experiments using a photometric dispersion analyzer (PDA) showed that the cationic silica alone contributed little to the flocculation. However, the cationic silica, in conjunction with an anionic polymer of high M(w) and low charge density, led to a significant improvement in the flocculation of fine clay particles. The mechanism of flocculation was explored by a systematic investigation of interaction between cationic silica and anionic polymers as well as of their adsorption behavior on clay surfaces. The influence of factors such as pH and electrolyte concentration on clay flocculation was also investigated.     

Rheological Properties of Particle-Stabilized Emulsions

We have studied the rheological properties of fumed silica particle-stabilized emulsions. Two particles of different polarity were considered, the first more hydrophilic “Aerosil R7200,” the second more hydrophobic “Aerosil R972.” These particles flocculate and probably form a network at the investigated concentration. The flow curves of emulsions stabilized by a single type of particles exhibit yield stress, shear-thinning behavior and thixotropy. Moreover they display rheological features typical of gels. These features are attributed to strengthening of the particle network by droplets. Moreover the rheological properties of w/o emulsions stabilized by hydrophobic are similar to the ones of o/w emulsions stabilized by hydrophilic particles. The rheological properties of o/w emulsions stabilized by mixtures of hydrophilic and hydrophobic particles have then been studied by keeping the total particle concentration constant and varying the mass ratio between particles. The results show that when the hydrophobic particle concentration increases, the viscosity and stability of emulsions decrease establishing evidence that the network is weakened due to preferential orientation of hydrophobic particles towards the oil phase.     

Successive adsorption of polyacrylamide compounds from electrolyte solutions on the surface of kaolinitic clay particles

Successive adsorption of oppositely charged polyelectrolytes, namely, cationic and anionic acrylamide copolymers, on a solid phase surface from solutions with high ionic strength is investigated. The constants of the Freundlich equation are calculated for the adsorption of different polymers. The interrelation between the adsorption values of polymers and their flocculation activity with respect to clay-salt suspensions is determined. The successive adsorption of oppositely charged polyelectrolytes strongly affects the flocculation due to the formation of polyelectrolyte complexes on the surface of clay particles. The mechanism for complexation is proposed.     

Shear-thickening flow of nanoparticle suspensions flocculated by polymer bridging

The steady-shear viscosity, dynamic viscoelasticity, and stress relaxation behavior were measured for suspensions of silica nanoparticles dispersed in aqueous solutions of poly(ethylene oxide) (PEO). The suspensions of silica with diameters of 8-25 nm show striking shear-thickening profiles in steady shear and highly elastic responses under large strains in oscillatory shear. Since the silica particles are much smaller than the polymer coils, one molecule can extend through several particles by intrachain bridging. Each polymer coil may remain isolated as a floc unit and the silica particles hardly connect two flocs. Therefore, the flow of suspensions is Newtonian with low viscosity at low shear rates. When the polymer coils containing several nanoparticles are subjected to high shear fields, three-dimensional network is developed over the system. The shear-thickening flow may arise from the elastic forces of extended bridges. But, the polymer chain is easily detached from particle surface by thermal energy because of large curvature of particles. As a result, the network structures are reversibly broken down in a quiescent state and the suspensions behaves as viscoelastic fluids with the zero-shear viscosity.     

Interaction forces between silica surfaces in aqueous solutions of cationic polymeric flocculants: effect of polymer charge

Three cationic polymers with molecular weights and charge density of 3.0 x 10(5) g/mol and 10% (D 6010), 1.1 x 10(5) g/mol and 40% (D6040), and 1.2 x 10(5) g/mol and 100% (D6099) were investigated in aqueous NaCl solutions in the presence of silica. The atomic force microscope (AFM) colloidal probe technique was used to determine silica interparticle interaction forces, which were compared to macroscopic information on the strength of interactions such as compressive yield stress measurements. It was found that in 30 mM NaCl solution the 10% charged polymer produced steric repulsion upon approach and long-range adhesion with multiple pull off events upon retraction at the optimum flocculation concentration. This suggests that the polymer was adsorbed in a conformation where segments extend from the surface, resulting in bridging flocculation. The 40 and 100% charged polymers produced attraction upon approach and strong adhesion with snap out from contact upon separation at optimum polymer dosages. This suggests that these polymers are adsorbed with flat conformations and is typical of charge neutralization or patch attraction. The attractions for 40 and 100% charged polymers measured with the AFM are significantly larger than for the 10% charged polymer. The polymer dose that produced the optimum flocculation and the maximum compressive yield stress typically corresponded to the polymer concentration that produced the maximum adhesion for each polymer. It was found that the magnitude of the adhesive force was more significant in determining the compressive yield stresses of the silica particle sediments than the aggregate size and structure.     

Synthesis of a new flocculant based on poly(acrylamide-co-(N-octyl-4-vinylpyridinium bromide)) [AM5/VP5C8Br]-application for the turbidity removal from clay suspension

The interactions between poly(acrylamide-co-(N-octyl-4-vinylpyridinium bromide)) [AM5/VP5C8Br] cationic polyelectrolyte, and clay particles in dilute aqueous suspensions are studied in the aim of adsorption and flocculation. The extents of both phenomena are significantly influenced by the ionic strength of the medium. The adsorption of the clay particles on the copolymer chains occurs initially by the hydrophobic interaction. As flocculation mechanisms, the hydrophobic interaction between copolymer chains and the clay particles appears to be principal. In this work, we have prepared a copolymer which has been characterized by conductivity, viscosity, ¹H NMR, and FT-IR spectroscopies. The copolymer dosage and pH are two of the most important experimental parameters in the coagulation/flocculation operations used for study and optimization of the wastewater treatment operations. Under optimized conditions, 97% efficiency of the turbidity elimination, with a very low flocculant concentration of 3?ppm have been achieved in order to produce drinking water with standard limits around the world (< 1 NTU). The conclusion drawn on the basis of these results is that wastewater treatment using this new copolymer [AM5/VP5C8Br] has proved to be a good flocculant in overseeing of wastewater turbidity problems.