Role of gemini surfactants (m‐s‐m type; m = 16, s = 4–6) on the reaction of [Zn(II)‐Gly‐Phe]+ with ninhydrin

In the present paper, reaction of zinc‐glycylphenylalanine ([Zn(II)‐Gly‐Phe]⁺) with ninhydrin has been investigated in gemini (m‐s‐m type; m = 16, s = 4–6) surfactants at temperature (70 °C) and pH (5.0). Monitoring the appearance of product at 400 nm was used to follow the kinetics, spectrophotometrically. The order of the reaction with respect to [Zn(II)‐Gly‐Phe]⁺ was unity while with respect to [ninhydrin] was fractional. The reaction constants involved in the mechanism were obtained. In addition to the rate constant (k_Ψ) increase and leveling‐off regions are observed with the geminis, just like as seen with conventional surfactant hexadecyltrimethylammonium bromide (CTAB), the former produced a third region of increasing k_Ψ at higher concentrations. A close agreement between observed and calculated rate constants was found under varying experimental conditions. A suitable mechanism consistent with the experimental findings has been proposed. Copyright © 2014 John Wiley & Sons, Ltd.     

Mechanistic study on Mo(CO)6‐catalyzed intramolecular [2 + 2] or [2 + 2 + 1] cycloaddition reaction of 5‐allenyl‐1‐ynes

By means of density functional theory, the Mo(CO)₆‐catalyzed intramolecular [2 + 2] or [2 + 2 + 1] cycloaddition reaction of 5‐allenyl‐1‐ynes was investigated. All the intermediates and transition states were optimized completely at B3LYP/6‐311++G(d,p) level (LANL2DZ(f) for Mo). Calculations indicate that the complexation of 5‐allenyl‐1‐ynes with Mo(CO)₆ occurred preferentially at the triple bond to give the complex M1 and then the complexation with the distal double bond of the allenes generates the complex M5 . In this reaction, Mo(CO)₆‐catalyzed intramolecular [2 + 2] cycloaddition is more favorable than [2 + 2 + 1] cycloaddition. The reaction pathway Mo(CO)₆ + R → M5 → T7 → M12 → M13 → T11 → M18 → P4 is the most favorable one, and the most dominant product predicted theoretically is P4 . The solvation effect is remarkable, and it decreases the reaction energy barriers. Copyright © 2011 John Wiley & Sons, Ltd.     

Comparison of the 13C (C = N) chemical shifts of substituted N‐(phenyl‐ethylene)‐anilines and substituted N‐(benzylidene)‐anilines

Comparison of ¹³C NMR of C = N bond chemical shifts δ_C(C = N) in substituted N‐(phenyl‐ethylene)‐anilines XArC(Me) = NArY (XPEAYs) with that in substituted N‐(benzylidene)‐anilines XArCH = NArY (XBAYs) was carried out. The δ_C(C = N) of 61 samples of XPEAYs were measured, and the substituent effect on their δ_C(C = N) were investigated. The results show the factors affecting the δ_C(C = N) of XPEAYs are quite different from that of XBAYs. A penta‐parameter correlation equation was obtained for the 61 compounds, which has correlation coefficient 0.9922 and standard error 0.12 ppm. The result indicates that, in XPEAYs, the inductive effects of substituents X and Y are major factors affecting the δ_C(C = N), while the conjugative effect of them have very little effect on the δ_C(C = N) and can be ignored. The substituent‐specific cross‐interaction effects between X and Y and between Me of C = N bond and substituent Y are important factors affecting the δ_C(C = N). Also, the excited‐state substituent parameter of substitute Y has certain contribution to the δ_C(C = N). Copyright © 2015 John Wiley & Sons, Ltd.     

Physicochemical characterization of paramagnetic ionic liquids 1‐vinyl‐3‐alkylimidazolium tetrahalogenidoferrate(III) [VRIM][FeClmBr4 − m]

Using microwave‐assisted synthesis method, a series of paramagnetic ionic liquids comprising 1‐vinyl‐3‐alkylimidazolium VRIM⁺ cation and tetrahalogenidoferrate (III) FeCl_mBr_{4 ? m}^? anion were designed and synthesized. The structure was analyzed using ¹H NMR and Raman spectroscopy. Ultraviolet–visible absorption spectra, thermal stability, magnetic susceptibility, viscosity, ionic conductivity, and solubility were characterized. Results show that elongation of the alkyl chain leads to replacement of bromides with a small amount of chlorides in the anion, shifting of UV maximum absorption peaks to shorter wavelengths, reduction of ionic conductivity, and solubility in polar solvents, as well as increase in fluidity, magnetic susceptibility, and solubility in nonpolar solvents. Copyright © 2014 John Wiley & Sons, Ltd.     

Micro‐Raman analysis and finite‐element modeling of 3 C‐SiC microstructures

Micro‐ and nano‐electromechanical systems (MEMS and NEMS) fabricated in 3 C‐SiC are receiving particular attention thanks to the material physical properties: its wide band gap (2.3 eV), its ability to operate at high temperatures, its mechanical strength and its inertness to the exposure in corrosive environments. However, high residual stress (which is normally generated during the hetero‐epitaxial growth process) makes the use of 3 C‐SiC in Si‐based MEMS fabrication techniques very limited leading to a failure of micro‐machined/sensor structures. In this paper, micro‐Raman characterizations and finite‐element modeling (FEM) of microstructures realized on poly and single‐crystal (100) 3 C‐SiC/Si films are performed. Transverse optical (TO) Raman mode analysis reveals the stress relaxation on the free standing structure (796.5 cm⁻¹) respect to the stressed unreleased region (795.7 cm⁻¹). Also, microstructures as cantilever, bridge and planar rotating probe show an intense stress field located around the undercut region. Here, the TO Raman mode undergoes an intense shift, up to 2 cm⁻¹, ascribed to the modification of the Raman stress tensor. Indeed, the generalized axial regime, described by diagonal components of the Raman stress tensor, cannot be applied in this region. Raman maps analysis and FEM simulations show the ‘activation’ of the shear stress, i.e. non‐diagonal components of the stress tensor. The stress‐Raman modes shift correlation, in the case of fully non‐diagonal stress tensors, has been investigated. The aim of future works will be to minimize the stress field generation and the defects density within the epitaxial layer. Copyright © 2012 John Wiley & Sons, Ltd.     

Near‐forward/high‐pressure‐backward Raman study of Zn1 − xBexSe (x ~ 0.5) – evidence for percolation behavior of the long (Zn―Se) bond

The apparently universal 1‐bond → 2‐mode percolation behavior in the Raman spectra of zincblende semiconductor alloys is generally observed for the short bond only, and not for the long one. In this work we perform a combined high‐pressure‐backward/near‐forward Raman study of the leading percolation‐type (Zn,Be)Se alloy (~50 at.% Be), which exhibits a distinct percolation doublet in the spectral range of its short Be―Se bond, in search of a Zn―Se analogue. The high‐pressure‐backward insight is not conclusive per se, but clarifies the perspective behind the near‐forward Raman study. The latter reveals an unique Zn―Se phonon–polariton. Its fair contour modeling depending on the scattering angle is achieved within the linear dielectric approach, based on ellipsometry measurement of the ZnBeSe refractive index. Somewhat surprisingly this reveals that the phonon–polariton in question is a ‘fractional’ one in that it carries only half of the available Zn―Se oscillator strength, as ideally expected in case of a BeSe‐like bimodal Raman behavior of the long Zn―Se bond. Copyright © 2015 John Wiley & Sons, Ltd.     

Investigation of N‐carbamoylamino acid nitrosation by {NO + O2} in the solid‐gas phase. Effects of NOx speciation and kinetic evidence for a multiple‐stage process

Nitrosation of N‐carbamoylamino acids (CAA) by gaseous NO + O₂, an interesting synthetic pathway to amino acid N‐carboxyanhydrides (NCA), alternative to the phosgene route, was investigated on N‐carbamoyl‐valine either in acetonitrile suspension or solventless conditions, and compared to the classical nitrosating system NaNO₂ + CF₃COOH (TFA), the latter being quite less efficient in terms of either rate, stoichiometric demand, or further tractability of the product. The rate and efficiency of the NO + O₂ reaction mainly depends on the O₂/NO ratio. Evaluation of the contribution of various nitrosating species (N₂O₃, N₂O₄, HNO₂) through stoichiometric balance showed the reaction to be effected mostly by N₂O₃ for O₂/NO ratios below 0.3, and by N₂O₄ for O₂/NO ratios above 0.4. The relative contribution of (subsequently formed) HNO₂ always remains minor. Differential scanning calorimetry (DSC) monitoring of the reaction in the solid phase by either HNO₂ (from NaNO₂ + TFA), gaseous N₂O₄ or gaseous N₂O₃, provides the associated rate constants (ca. 0.1, 2 and 10⁸ s^?1 at 25°C, respectively), showing that N₂O₃ is by far the most reactive of these nitrosating species. From the DSC measurement, the latent heat of fusion of N₂O_3, 2.74 kJ · mol^?1 at ?105 °C is also obtained for the first time. The kinetics was investigated under solventless conditions at 0°C, by either quenching experiments or less tedious, rough calorimetric techniques. Auto‐accelerated, parabolic‐shaped kinetics was observed in the first half of the reaction course, together with substantial heat release (temperature increase of ca. 20°C within 1–2 min in a 20‐mg sample), followed by pseudo‐zero‐order kinetics after a sudden, important decrease in apparent rate. This kinetic break is possibly due to the transition between the initial solid‐gas system and a solid‐liquid‐gas system resulting from water formation. Overall rate constants increased with parameters such as the specific surface of the solid, the O₂/NO ratio, or the presence of moisture (or equivalently the hydrophilicity of the involved CAA), however without precise relationship, while the last two parameters may directly correlate to the increasing acidity of the medium. Copyright © 2007 John Wiley & Sons, Ltd.     

Indirect Raman identification of the proton insertion in the high‐temperature [Ba/Sr][Zr/Ti]O3‐modified perovskite protonic conductors

OH⁻ and H₃O⁺ species in hydrates and simple oxides are rather well characterised from their IR, Raman and inelastic neutron points of view. For the H⁺ (H₂O) species in solid state the variability is well established and assignment remains discussed. The question of the vibrational signature of isolated proton (e.g. the ionic proton, a proton sharing its interaction with more than two acceptors) and its dynamic nature (proton gas, polaron,…) is open. H⁺‐containing modified perovskites A(Ba,Sr,…) B(Zr,Ce,Ti,…) O₃ are potential ceramic membranes for fuel cell and medium temperature water electrolysis (300–800 °C). Comparison studies of the protonated and non‐protonated lanthanide/rare earth‐modified perovskites of type Ba(Sr)Zr(Ti)O₃ as well as Al‐modified BaTiO₃ show that a broad component centred at 2500 cm⁻¹ is observed after ‘proton insertion’. Its intensity is correlated to the protonic species content as well as to the conductivity of the materials. The mixed nature of this feature is discussed: fluorescence related to the dangling bonds, A, B, C bands or new phenomena related to the ionic protons and associated electronic defect. Copyright © 2008 John Wiley & Sons, Ltd.     

Near infrared photodetectors based on sub‐gap absorption in organohalide perovskite single crystals

Organohalide perovskite optoelectronics based upon large (mm‐sized) single crystals present exciting opportunities for new device platforms and fundamental studies. Herein, we report CH₃NH₃PbBr₃ and CH₃NH₃PbI₃ single crystals prepared via an inverse temperature crystallization method with strong near infrared photoresponses significantly below the optical gap. Light intensity dependent photocurrent measurements reveal the photoresponse is not a two‐photon phenomenon, but rather is derived from a linear mechanism. The effect (including responsivity and speed) is enhanced in a photoresistor architecture, indicating that the photoresponse is due to absorption into surface trap states in the crystal. Without any optimisation, respectable NIR responsivities at room temperature of ∼10^‐2 A W⁻¹ at a low 1V bias operating voltage are achieved. These results again demonstrate the remarkable potential of organohalide perovskites as light sensing materials, and the possibilities for engineering a new class of single crystal‐based optoelectronics.

     

Three‐photon absorption properties of a novel symmetrical Carbazole derivative having terminal 1,10‐phenanthroline rings via carbon–nitrogen (C = N) double bond

Three‐photon absorption (3PA) properties of symmetric‐type carbazole derivatives show great potential for application in light‐activated therapy and optical limiting. A novel symmetrical carbazole derivative (abbreviated as POCP) with end‐groups of 1,10‐phenanthroline rings as the donor moieties, chained via carbon–nitrogen (C = N) double bond, has been synthetized and its three photon absorption properties has been also determined by using a Q‐switched Nd: YAG laser pumped with 30 ps pulses at 1064 nm in dimethylformamide. The measurement of 3PA cross‐section of this compound is performed by open aperture Z‐scan and σ_3PA is 481 × 10^–78 cm⁶ ? s²/photon² for the transition S₀ → S₁. The influence of the molecular structure of this compound on three‐photon absorption cross‐sections is discussed micromechanically by Austin model 1 and Zerner's Intermediate Neglect of Differential Overlap/S method. Copyright © 2012 John Wiley & Sons, Ltd.     

Thermal reaction of electron deficient 4‐oxo‐4H‐pyrazole 1,2‐dioxide with cycloheptatriene: the first examples of the formation of an endo‐[4π + 6π]‐cycloadduct and an intramolecular 1,3‐dipolar reaction leading to a heterocage

The reaction of 3,5‐bis(methoxycarbonyl)‐4‐oxo‐4H‐pyrazole 1,2‐dioxide (1a) with 1,3,5‐cycloheptatriene (2b) gave a mixture of the novel endo‐[4 + 6]‐cycloadduct (4ab), anti‐exo‐[4 + 2]‐cycloadduct (5ab), and the heterocage (6ab) derived from the intramolecular 1,3‐dipolar cycloaddition reaction of the syn‐endo‐[4 + 2]‐cycloadduct. Analogous endo‐[4 + 6] selectivity in 1,3‐dipolar cycloadditions has not been reported previously. The X‐ray analysis indicates that 6ab has a very long N_sp3–N_sp3 bond distance of 1.617(4) Å. The cycloaddition behaviour is discussed on the basis of transition‐state structures optimized at the B3LYP/6‐31G(d) level of theory, from which predictions of the peri‐, regio‐, and stereoselectivities agreed well with the experimental results. Copyright © 2012 John Wiley & Sons, Ltd.     

Use of N‐chloro‐N‐methyl‐p‐toluenesulfonamide in N‐chlorination reactions

Second‐order rate constants (k₂) were determined for the addition of ten nitrogenous organic compounds (benzylamine, 2,2,2‐trifluoethylamine chlorhidrate, methylamine chlorhidrate, glycine ethyl ester chlorhidrate, glycine, glycylglycine chlorhidrate, morpholine, pyperidine, pyperazine and dimethylamine) to the N‐chloro‐N‐methyl‐p‐toluenesulfonamide (NCNMPT) in the formation reaction of N‐chloramines in aqueous solution at 25 °C and ionic strength 0.5 M. The series of nucleophiles considered is structurally very varied and covers five pK_a units. The kinetic behaviour is similar for all compounds, being the elementary step the transfer of chlorine from the NCNMPT molecule to the nitrogen of the free amino group. These reactions were found first order in both reagents. The values of the rate constants indicate that the more basic amines produce N‐chloramines more readily. Rate constants for the nucleophilic attack are shown to correlate with literature data for some of these nitrogenous organic compounds in their reaction with N‐methyl‐N‐nitroso‐p‐toluenesulfonamide. Both reactions involve that the rate determining step is the attack of nitrogenous compounds upon electrophilic centre (Cl or else NO group). NCNMPT is a particularly interesting substrate, for which has not hitherto been published kinetic information, that allows us to assess the efficiency and the competitiveness of this reaction and compare it with other agents with a Cl⁺ atom. Copyright © 2013 John Wiley & Sons, Ltd.     

Characterization of the Metrology beamline at the SOLEIL synchrotron and application to the determination of mass attenuation coefficients of Ag and Sn in the range 3.5 ≤ E ≤ 28 keV

This work presents the new Metrology beamline at the SOLEIL synchrotron facility and a first attempt to quantitative measurements of mass attenuation coefficients for Ag and Sn performed on the hard X‐ray branch. We first describe the beamline itself and the characterization performed of the unfocused monochromatic beam running mode. We performed a first experimental measurement of mass attenuation coefficients in the range 3.5 ≤ E ≤ 28 keV and we also derived the K‐absorption and L‐absorption jump ratios. The results are compared with theoretical values as well as with other experimental data and agree well with previous published values. Copyright © 2011 John Wiley & Sons, Ltd.     

Low‐Temperature‐Processed CdS as the Electron Selective Layer in an Organometal Halide Perovskite Photovoltaic Device

Organic–inorganic halide perovskites have recently been crowned as the leading next‐generation photovoltaic material due to their high efficiency and simple fabrication process. Herein, a low‐temperature‐processed CdS thin film (commonly used as a buffer layer in commercial CdTe or CIGSe solar cells) is reported as an electron selective layer in perovskite devices based on the following reasons: First, the photoelectric property of CdS thin film is investigated, illustrating the possibility of CdS as the electron selective layer in the application of methylammonium lead (II) iodide perovskite devices. More specifically, CdS semiconductor film presents a higher mobility compared with traditional TiO₂ thin film, which benefits the electron extraction and transmission; second, it is found that the perovskite thin film spun‐coating on the CdS substrates grows with an obvious tendency along the direction toward the thickness of thin film, which reduces the chance of recombination of electrons and hole, beneficial to their separation. It is also revealed that the perovskite‐device‐based CdS electron selective layer has a higher stability compared with that of TiO₂ due to the difference of substrates wetting.