热传导型半导体瞬态问题的特征有限体积方法及分析

在这篇文章中,将特征线方法与有限体积方法相结合,构造了热传导型半导体瞬态问题的全离散特征有限体积方法(CFVM).在一般的条件下进行理论分析,得到了次优阶L2误差估计结果.     

IMPLICIT-EXPLICIT MULTISTEP FINITE ELEMENT-MIXED FINITE ELEMENT METHODS FOR THE TRANSIENT BEHAVIOR OF A SEMICONDUCTOR DEVICE

The transient behavior of a semiconductor device consists of a Poisson equa-tion for the electric potential and of two nonlinear parabolic equations for the electrondensity and hole density.The electric potential equation is discretized by a mixed finiteelement method. The electron and hole density equations are treated by implicit-explicitmultistep finite element methods. The schemes are very efficient. The optimal order errorestimates both in time and space are derived.     

A MIXED FINITE ELEMENT METHOD FOR THE TRANSIENT BEHAVIOR OF A SEMICONDUCTOR DEVICE

The transient behavior of a semiconductor device is described by a system of three quasilinear partial differential equations. One is elliptic in form for the electric potential and the other two are parabolic in form for the conservation of electron and hole concentrations. The electric potential equation is discretized by a mixed finite element method. The electron and hole density equations are treated by a Galerkin method that applies a variant of the method of characteristics to the transport terms. Optimal order convergence analysis in L2 is given for the proposed method.     

半导体瞬态问题的混合迎风有限体积格式

半导体器件的瞬时状态由包含3个拟线性偏微分方程所组成的方程组的初边值问题来描述.在三角剖分的基础上,对椭圆型的电子位势方程采用混合有限体积元法来逼近,对对流扩散型的电子浓度和空穴浓度方程采用迎风有限体积元方法来逼近,并进行了详细的理论分析,得到了最优阶的误差估计结果.最后,针对混合有限体积元法和迎风有限体积元法分别单独使用以及两种方法结合使用的情形给出了不同的数值算例.     

热传导型半导体瞬态问题的迎风有限体积元方法

半导体瞬态问题的数学模型是由四个方程组成的非线性偏微分方程组的初边值问题所决定．其中电子浓度和空穴浓度方程往往是对流占优扩散问题,普通的方法已不适用,为此本文用迎风格式处理对流项部分,提出一种全离散迎风有限体积元方法,并进行收敛性分析,在最一般的情况下得到了一阶精度L2模误差估计结果．     

一维半导体器件的特征有限体积元方法及分析

1、引言 有限体积元方法作为求解微分方程的一种新技术,日益受到普遍关注．本文将特征线方法与有限体积元方法相结合,构造出特征有限体积元方法,该方法综合了特征有限差分方法和特征有限元方法的主要优点,与特征有限差分方法相比,     

FINITE DIFFERENCE FRACTIONAL STEP METHODS FOR THE TRANSIENT BEHAVIOR OF A SEMICONDUCTOR DEVICE

Characteristic finite difference fractional step schemes are put forward. The electric potential equation is described by a seven-point finite difference scheme, and the electron and hole concentration equations are treated by a kind of characteristic finite difference fractional step methods. The temperature equation is described by a fractional step method. Thick and thin grids are made use of to form a complete set. Piecewise threefold quadratic interpolation, symmetrical extension, calculus of variations, commutativity of operator product, decomposition of high order difference operators and prior estimates are also made use of. Optimal order estimates in l2 norm are derived to determine the error of the approximate solution. The well-known problem is thorongley and completely solred.     

半导体器件瞬态模拟的对称正定混合元方法

提出具有对称正定特性的混合元格式求解非稳态半导体器件瞬态模拟问题。提出一个最小二乘混合元方法、一个新的具有分裂和对称正定性质的混合元格式和一个解经典混合元方程的对称正定失窃工格式求解电场位势和电场强度方程;提出一个最小二乘混合元格式求解关于电子与空穴浓度的非稳态对流扩散方程,浓度函数和流函数被同时求解;采用标准的有限元方法求解热传导方程。建立了误差分析理论。     

ON THE FINITE VOLUME ELEMENT VERSION OF RITZ-VOLTERRA PROJECTION AND APPLICATIONS TO RELATED EQUATIONS

In this paper, we present a general error analysis framework for the finite volume element (FVE) approximation to the Ritz-Volterra projection, the Sobolev equations and parabolic integro-differential equations. The main idea in our paper is to consider the FVE methods as perturbations of standard finite element methods which enables us to derive the optimal L2 and H1 norm error estimates, and the L∞ and W∞1 norm error estimates by means of the time dependent Green functions. Our disc ussions also include elliptic and parabolic problems as the special cases.     

非结构网格上一类满足局部极值原理的三阶精度有限体积方法

对二维标量双曲型守恒律方程,发展了一类满足局部极值原理的非结构网格有限体积格式.其构造思想是,以单调数值通量为基础,通过应用基于最小二乘法的二次重构和极值限制器,使数值解满足局部极值原理.为保证数值解在光滑区域达到三阶精度,该格式可结合局部光滑探测器使用.本文从理论上分析了格式的稳定性条件,数值实验验证了格式的精度和对间断的分辨能力.     

一类变分不等方程的有限元逼近

本文对一类带有两个变函数的非线性变分不等方程进行讨论，所讨论的区域Ω＝Ｒ＾ｎ是有界子开子集，边界具有分片Ｃ＾２光滑，但不必为凸区域，文中给出了解的有限元逼近及逼近的误差估计。     

CONVERGENCE OF A MIXED FINITE ELEMENT FOR THE STOKES PROBLEM ON ANISOTROPIC MESHES

The main aim of this paper is to study the convergence properties of a low order mixed finite element for the Stokes problem under anisotropic meshes. We discuss the anisotropic convergence and superconvergence independent of the aspect ratio. Without the shape regularity assumption and inverse assumption on the meshes, the optimal error estimates and natural superconvergence at central points are obtained. The global superconvergence for the gradient of the velocity and the pressure is derived with the aid of a suitable postprocessing method. Furthermore, we develop a simple method to obtain the superclose properties which improves the results of the previous works .     

EXPONENTIAL MESH APPROXIMATIONS FOR A 3D EXTERIOR PROBLEM IN MAGNETIC INDUCTION

A numerical method combining the approaches of C.I. Goldstein and L.-A. Ying is used for the simulation in three-dimensional magnetostatics related to an exterior problem in magnetic induction. Recently introduced, this method is based on the use of a graded mesh obtained by gluing homothetic layers in the exterior domain and has been performed in the case of edge element discretizations. In this work, the theoretical and practical aspects of the method are inspected in the case of face element and volume element discretizations,for computing a magnetic induction. Error estimates, implementations, and numerical results are provided.     

ERROR ANALYSIS OF A STABILIZED FINITE ELEMENT METHOD FOR THE GENERALIZED STOKES PROBLEM

This paper is devoted to the establishment of sharper $a$ $priori$stability and error estimates of a stabilized finite element method proposed by Barrenechea and Valentin for solving the generalized Stokes problem, which involves a viscosity $\nu$ and a reaction constant $\sigma$. With the establishment of sharper stability estimates and the help of $ad$ $hoc$finite element projections, we can explicitly establish the dependence of error bounds of velocity and pressure on the viscosity $\nu$, the reaction constant $\sigma$, and the mesh size $h$. Our analysis reveals that the viscosity $\nu$ and the reaction constant $\sigma$ respectively act in the numerator position and the denominator position in the error estimates of velocity and pressure in standard norms without any weights. Consequently, the stabilization method is indeed suitable for the generalized Stokes problem with a small viscosity $\nu$ and a large reaction constant $\sigma$. The sharper error estimates agree very well with the numerical results.     

带有多项式非线性项的高维反应扩散方程有限差分格式的长时间行为

本文考虑了一类带有多项式非线性项的高维反应扩散方程．建立了一个全离散的有限差分格式,并证明了差分解的存在唯一性．分析了由差分格式生成的离散系统的动力性质,在对差分解先验估计的基础上得到了离散动力系统的整体吸引子的存在性．最后证明了差分格式的长时间稳定性和收敛性．     

A PRIORI L_2 ERROR ESTIMATES FOR A NONLINEAR PARABOLIC SYSTEM BASED ON COMBINING THE METHOD OF CHARACTERISTICS WITH MIXED FINITE ELEMENT PROCEDURE

A nonlinear parabolic system is derived to describe incompressible nuclear waste-disposal contamination in porous media. A sequential implicit tirne-stepping is defined, in which the pressure and Darcy velocity of the mixture are approximated simultaneously by a mixed finite element method and the brine, radionuclid and heat are treated by a combination of a Galerkin finite element method and the method of characteristics. Optimal-order convergence in L2 is proved. Time-truncation errors of standard procedures are reduced by time stepping along the characteristics of the hyperbolic part of the brine, radionuclide and heal equalios, temporal and spatial error are lossened by direct compulation of the velocity in the mixed method, as opposed to differentiation of the pressure.     

THE GLOBAL ARTIFICIAL BOUNDARY CONDITIONS FOR NUMERICAL SIMULATIONS OF THE 3D FLOW AROUND A SUBMERGED BODY

We consider the numerical approximations of the three-dimensional steady potential flow around a body moving in a liquid of finite constant depth at constant speed and distance below a free surface in a channel. One vertical side is introduced as the up-stream artificial boundary and two vertical sides are introduced as the downstream arti-ficial boundaries. On the artificial boundaries, a sequence of high-order global artificial boundary conditions are given. Then the original problem is reduced to a problem defined on a finite computational domain, which is equivalent to a variational problem. After solving the variational problem by the finite element method, we obtain the numerical approximation of the original problem. The numerical examples show that the artificial boundary conditions given in this paper are very effective.