共查询到20条相似文献,搜索用时 15 毫秒
1.
Nobuo Sugimoto 《Optical Review》2000,7(3):235-240
The concept of a pulsed bistatic lidar for measuring water cloud particle size is presented. The method uses a two-color laser and a receiver with a polarization analyzer located at a suitable scattering angle. The dependence of Mie scattering on scattering angle, wavelength, and polarization is used to derive water cloud droplet size. The measurement was simulated for the C1 and C2 clouds, and the technique for determining mode radius was studied. The result shows the lidar system with a two-wavelength laser (1064 nm and 532 nm) and a dual-polarization receiver fixed at a scattering angle of around 178 deg can be used to measure a cloud particle size (mode radius) of 4 to 12 μm. Evaluation of the effect of multiple scattering showed that the method can be applied not only for the measurement at the cloud base but also in the cloud where multiple scattering is not negligible. 相似文献
2.
Although it has long been recognized that the effects of photon multiple scattering generally need to be accounted for in the analysis of lidar cloud returns, this is a difficult problem and current approaches are still rudimentary. The multiple scattering process is controlled by the size of the lidar beamwidth and the distance to the cloud, which jointly determine the lidar footprint, but cloud microphysical content (i.e., particle size, concentration, and shape) exerts a strong influence on the range distribution and depolarization of the returned energy. Since clouds are inherently inhomogeneous with height, it is our premise that vertically homogeneous cloud simulations based on idealized particle size distributions lead to misleading results. We offer a more realistic approach based on the contents of growing water droplet clouds predicted by a sophisticated adiabatic cloud model, which are offered for use as new standard vertically-inhomogeneous cloud models. Lidar returned signal and depolarization profiles derived from our analytical double-scattering method are given for inter-comparison purposes.Presented at the 7th International Workshop on Multiple Scattering Lidar/Light Experiments (MUSCLE7), July 21–23 1994, Chiba, Japan. 相似文献
3.
A new bistatic lidar was developed for measuring water cloud particle size at the base of lower clouds. The lidar uses a pulsed
Nd:YAG laser at 532 nm and a receiver having a polarization analyzer located at a suitable scattering angle. Cloud particle
size (mode radius of the assumed size distribution) was derived from the ratio of the polarization components of the scattered
light based on the single scattering Mie theory. The experiment was performed on board the research vessel Mirai in the northwestern
Pacific. Particle size at the bottom of maritime cumulus and stratus was measured, and the difference between the internal
structures of cumulus and stratus was observed. The effect of multiple scattering was studied by changing the observing scattering
angle. The effect was not significant when the penetration depth was less than 50 m. 相似文献
4.
5.
气温是描述大气状态的基本参数之一,温度的准确测量对天气预报、气候预测及其他气象参数的反演都至关重要。激光雷达作为一种遥感仪器,已经用于气象要素的探测中(风、温度、气溶胶的光学厚度等)。目前,测温激光雷达主要有拉曼激光雷达(振动和转动)、共振荧光激光雷达和Rayleigh散射激光雷达等,拉曼激光雷达需要大功率的激光器和复杂的背景滤波器;共振荧光激光雷达无法探测平流层内的温度;基于Rayleigh散射的测温激光雷达多应用于温度的相对测量,反演温度时需要建立响应函数和校准程序;基于固体腔扫描F-P干涉仪测量大气Rayleigh散射光谱来反演温度的方法,时间分辨率较低,并且该方法在测量过程中需要运动部件,所以不利于星载。在大气低层,分子的Rayleigh散射光谱会受到Brillouin散射的影响,两种散射信号叠加形成的Rayleigh-Brillouin散射光谱不再服从Gaussian分布,直接通过测量散射光谱的半高全宽来反演温度,会产生误差。基于回波能量的方法会受到气溶胶Mie散射信号的影响,所以在对流层中该方法并不适用。为了实现对流层内温度的高精度和高时间分辨率的测量,提出利用Fizeau干涉仪和PMT阵列对对流层内分子的Rayleigh-Brillouin散射光谱进行测量,并通过插值的方法来对回波信号中气溶胶Mie散射信号进行抑制,从而使Mie散射信号对温度反演的影响较小,最后将测量光谱和理论光谱进行全光谱匹配来实现温度的反演。除此之外,还对Fizeau干涉仪的自由光谱区、固体腔几何长度、腔体反射率、扫描间隔等参数进行了优化设计。为了验证本文提出方法的可行性,利用Matlab软件建立了一套仿真模型,通过模拟表明,在不考虑云、风和水汽含量的影响时,利用该方法测量对流层内的大气温度时,测量误差小于1 K。该测温方法可以对对流层内的大气温度廓线实现高精度、高时间分辨率的测量, 在测量过程中不需要使用运动部件,有较高的使用价值,并对同类高光谱激光雷达分光系统的研究具有借鉴意义, 为我国高光谱激光雷达陆基及星载应用提供了一套可行的技术方案和温度反演方法。 相似文献
6.
Christian Werner Grigorii Kokhanenko Gennadii Matvienko Vitalii Shamanaev Yurii Grachjov Igor Znamenskii Ulrich G. Oppel 《Optical Review》1995,2(3):221-224
First, in this report an overview is given on the use of the Russian laser altimeter in space “LORA” as a lidar for cloud measurements. Secondly, the influence of multiple scattering is verified by analysis of the backscatter signals from clouds having the excellent range resolution of a rangefinder.Presented at the 7th International Workshop on Multiple Scattering Lidar/Light Experiments (MUSCLE7), July 21–23 1994, Chiba, Japan. 相似文献
7.
C. Mitrescu 《Journal of Quantitative Spectroscopy & Radiative Transfer》2005,94(2):201-224
Cirrus clouds play an important role in the climate through their optical and microphysical properties. The problem with measuring optical properties of these clouds can be partially addressed by using lidar systems. This paper presents a new model for describing the multiple scattering contribution to the backscatter signal measured by the lidar system. The new lidar equation introduced this way, expresses the backscatter signal in terms of a polynomial function of the cloud scattering coefficient. Cloud optical properties such as the extinction coefficient and lidar ratio can be deduced from the new proposed lidar equation. Moreover, some cloud microphysical properties can also be inferred from these optical properties. The method is applied to lidar data collected by the micropulsed lidar operating at Nauru under the auspices of the US Department of Energy ARM program. 相似文献
8.
An ultraviolet (UV) Raman lidar system at 354.7 nm has been developed for accurately measuring the aerosol extinction profiles. A spectroscopic filter combining a high-spectral-resolution grating with two narrowband mirrors is used to separate the vibrational Raman scattering signal of N2 at a central wavelength of 386.7 nm and the elastic scattering signal at 354.7 nm. The aerosol extinction is derived from the Raman scattering of N2 and the elastic scattering by the use of Raman method and Klett method, respectively. The derived results of aerosol extinction are used to compare the difference of two retrieval methods, and the preliminary experiment shows that the Raman lidar system operated in analog detection mode has the capability of measuring aerosol profiles up to a height of 3 km with a laser energy of 250 mJ and an integration time of 8 min. 相似文献
9.
Yu You George W. Kattawar Ping Yang Yong X. Hu Bryan A. Baum 《Journal of Quantitative Spectroscopy & Radiative Transfer》2006,100(1-3):470-482
Measurements from depolarized lidars provide a promising method to retrieve both cloud and aerosol properties and a versatile complement to passive satellite-based sensors. For lidar observations of clouds and aerosols, multiple scattering plays an important role in the scattering process. Monte Carlo simulations are carried out to investigate the sensitivity of lidar backscattering depolarization to cloud and aerosol properties. Lidar parameters are chosen to be similar to those of the upcoming space-based CALIPSO lidar. Cases are considered that consist of a single cloud or aerosol layer, as well as a case in which cirrus clouds overlay different types of aerosols. It is demonstrated that besides thermodynamic cloud phase, the depolarized lidar signal may provide additional information on ice or aerosol particle shapes. However, our results show little sensitivity to ice or aerosol particle sizes. Additionally, for the case of multiple but overlapping layers involving both clouds and aerosols, the depolarized lidar contains information that can help identify the particle properties of each layer. 相似文献
10.
针对不同比例的灰尘和海盐团簇自然气溶胶,利用离散偶极子近似(DDA)法,通过考察成分的影响,使用波长为0.55 m,尺度参数变化范围为0.1~25时,研究了散射相函数和激光雷达比的影响,结果表明二者的变化趋势大体相同。尺度参数为13~24时,团簇自然气溶胶散射相函数有明显的后向散射加强,其中尺度参数为18附近,后向散射加强效应最明显。灰尘比海盐对散射相函数影响更大,二者的影响主要集中在尺度参数为15~25范围内,但除了散射角为180附近的后向外,影响的散射角方向略有不同。不同比例下的团簇自然气溶胶激光雷达比在尺度参数为3左右有最大值,其值约为180。在尺度参数为0.2~25范围内,成分对激光雷达比的影响不大,相对偏差小于10%,特别是尺度参数为0.5~2时的影响可以忽略,相对偏差小于1%。 相似文献
11.
基于大气物理学研究了水云云滴增长过程中的粒谱及散射特性.研究结果表明,凝结增长使粒谱半高宽和有效半径不断增加,碰并增长使粒谱出现多峰分布,有效半径增加.在凝结增长和碰并增长共同作用下,有效半径的平均增长速率为8 nm/s.凝结增长和碰并增长单独作用下,消光系数和散射系数随时间呈线性变化.在二者共同作用下,除3.2 mm波长外,消光系数和散射系数随时间呈指数增长;1.064, 2.2, 3.7, 12和22μm波长的不对称因子逐渐趋于稳定,200μm的不对称因子呈指数增长,3.2 mm的不对称因子基本保持不变;1.064和2.2μm波长的雷达比在20 sr附近波动,3.7μm波长的雷达比呈大幅振荡.云滴增长过程中,水云在1.064, 2.2和3.7μm波长的单次散射反照率逐渐降低,在12μm, 22μm, 200μm和3.2 mm波长的单次散射反照率逐渐增加,波长指数的绝对值逐渐减小.研究结果可为天气预报、地气辐射平衡研究和遥感数据校正提供重要的参考. 相似文献
12.
We present the results of measuring the scattering matrix of a water suspension of zinc oxide at a wavelength of 0.63 μm in
the range of scattering angles of 15–150°. The angle dependences of matrix elements were measured using a laser polarimeter,
the optical scheme of which contained two electro-optical modulators. We compare the measurement results with calculation
data for spherically symmetric scatterers. We demonstrate that at a dimensional parameter value of 1.8, in interpreting the
data using the model of spherically symmetric scatterers, it is possible to determine the parameters of particle distribution
of a zinc oxide suspension with an error of 30%. 相似文献
13.
非同轴激光雷达由于存在发射激光与接收望远镜之间的不完全重叠区, 造成近场回波信号与真实大气信号不一致. 对于多波长激光雷达, 这种不一致更为突出和复杂. 然而, 近场大气是人类活动最集中的区域, 因此对多波长激光雷达近场信号进行校正, 对于了解和探究边界层大气具有十分重要的意义. 提出了一种利用粒子谱仪测量近地层气溶胶尺度谱分布并运用Mie 散射理论和低层大气指数衰减规律, 进而直接校正多波长激光雷达消光系数廓线近场信号的新方法. 通过对晴天、多云天气和雾天多波长气溶胶消光系数廓线近场信号的校正, 证明了该方法的可行性和实用性. 该方法着重考虑了多波长激光雷达比的波长依赖性和气溶胶粒子谱分布的天气相关性, 将该方法用于近地层大气消光系数廓线校正, 减少了由于不考虑这两个因素带来的消光系数廓线反演和校正的不确定性. 该方法对于研究不同天气情况下边界层内的大气气溶胶物理、光学特性具有一定的实用价值和借鉴意义. 相似文献
14.
根据米氏(Mie)散射理论,通过数值模拟分析了气溶胶折射率虚部n_i在不同散射角度上对双散射角激光光学粒子计数器(L-OPC)响应曲线的影响,定义了敏感函数。根据分析,散射角应该在小于20°和40°~60°之间选取。以散射角系统ψ=9°,β=5°,λ=0.65μm和ψ=50°,β=20°,λ=0.65μm为例,其中一个散射角受折射率虚部n_i的影响较小,另一个较大。在测量粒子谱分布的同时,利用n_i对不同散射角度响应曲线的影响差异,来确定n_i值,并提出确定n_i的方法。还给出了双散射角激光光学粒子计数器的模拟测量结果。 相似文献
15.
针对不同比例的灰尘和海盐团簇自然气溶胶,利用离散偶极子近似(DDA)法,通过考察成分的影响,使用波长为0.55 m,尺度参数变化范围为0.1~25时,研究了散射相函数和激光雷达比的影响,结果表明二者的变化趋势大体相同。尺度参数为13~24时,团簇自然气溶胶散射相函数有明显的后向散射加强,其中尺度参数为18附近,后向散射加强效应最明显。灰尘比海盐对散射相函数影响更大,二者的影响主要集中在尺度参数为15~25范围内,但除了散射角为180附近的后向外,影响的散射角方向略有不同。不同比例下的团簇自然气溶胶激光雷达比在尺度参数为3左右有最大值,其值约为180。在尺度参数为0.2~25范围内,成分对激光雷达比的影响不大,相对偏差小于10%,特别是尺度参数为0.5~2时的影响可以忽略,相对偏差小于1%。 相似文献
16.
The peak position for a lidar return signal is calculated and measured for the horizontal path with variation of the laser beam divergence angle (θ), and the inclination angle (δ) between the telescope and laser axes. This work shows that θ and δ are very important parameters to use in the design or alignment of a lidar system receiving a good lidar signal. This paper describes an experimental determination of geometrical form factors in the lidar equation. We receive the signals and determine the geometrical form factors by slope method in a homogeneous atmosphere. The differential absorption lidar equation is evaluated for the dual-pulse lidar system. A method using a geometrical form factor determined by the experiment is introduced to correct the error in C2H4 measurement. This method shows good correction of measurement error in lidar dual-pulse operation, especially in the short range. 相似文献
17.
颗粒测试在工业生产和科学研究中涉及的领域非常广泛,常用的颗粒粒度及其分布的测试方法是激光粒度测试法,其具有测试精度高、测量速度快、重复性好和可测粒径范围宽等突出优点。CCD传感器有灵敏度高、分辨率高、噪声小和较大的动态范围等优点,其作为激光粒度仪的探测器提高光强分辨率的应用已经很普遍了。为提高测量精度,通过对CCD传感技术的研究,应用图像处理的方法来设计光电探测器,搭建了基于米氏散射原理的激光粒度测试系统。实验结果表明,用CCD传感器采集光散射图像,再对图像进行处理,D50与D10误差在6%之内,D90误差在1%之内,降低了测量的重复误差。 相似文献
18.
高空卷云主要由各种不同形状的冰晶粒子组成,是地空链路上激光信号传输的重要影响因素。依据高空卷云中冰晶粒子的分布特征和散射特性,采用C版本的离散纵标法(CDISORT),充分考虑地球球形曲率及云层冰晶粒子多次散射影响因素,研究准球形边界云层的激光透过率和衰减特性,并比较了太阳天顶角不同时平面平行模式和准球面模式下卷云大气激光透过率的差异,数值计算了三种激光波长(0.65,1.06和3.8 μm)在卷云中传输时的衰减和透过特性。计算结果表明:较小太阳天顶角(小于80°)入射时,两种模式下卷云大气激光透过率相对误差很小,其中0.65 μm激光波长入射时两种模式下的相对误差仅为1.72%,较大太阳天顶角(大于80°)入射时,两种模式下卷云大气激光透过率相对误差明显增大,0.65 μm激光波长入射时两种模式下的相对误差最大达到69%;卷云粒子单次散射时,激光在云层的衰减与卷云粒子有效半径、传输距离、光学厚度及激光波长等因素有关,随光学厚度的增加,云层的激光透过率减少,1.06 μm激光波长入射时透过率最大,3.8 μm激光波长入射时透过率最小;0.65和1.06 μm激光波长入射时,随云层粒子有效半径的增加激光透过率逐渐增加,而3.8 μm波长激光,随云层粒子有效半径的增加激光透过率逐渐减少,随相对方位角的增加,云层的激光透过率减少,且不同卷云传输模型对激光透过率也存在不同的影响。该研究工作将为开展地空链路星载、机载激光通信、激光雷达探测等工程系统中的激光信号云层传输特性的应用提供理论支持,同时也可进一步拓展为地空链路激光遥感、制导和预警等应用提供预先理论研究基础。 相似文献
19.
如何对低云下雾霾的激光雷达探测数据进行准确定标,一直是米散射激光雷达数据反演中一个有待解决的问题.对于低云和雾霾同时出现的天气,激光很难穿透云层,不能利用大气清洁层对激光雷达信号定标.而对于探测高度小于6 km的便携式米散射激光雷达,由于探测高度较低,也很难利用大气清洁层对激光雷达数据进行定标.本文根据Fernald前向积分方程的特点,提出了一种气溶胶消光系数迭代算法.通过对反演过程进行特定设置,每经过一次迭代,利用气溶胶消光系数迭代算法得到的气溶胶消光系数反演值与其真实值之间的差值就会相应减小.经过几次迭代后,气溶胶消光系数反演值与真实值之间的差值就会小到可以忽略不计.初步反演结果表明:利用气溶胶消光系数迭代算法,无需对激光雷达探测数据定标就能精确反演出气溶胶消光系数廓线. 相似文献
20.
This paper describes a technique aimed at measuring particle size by light scattering from gaussian laser beams. The uncertainties in illumination due to the beam shape are avoided by determination of the direction and velocity. The method, which we arbitrarily called the Two Beam System (TBS), uses a simple birefringent prism to separate the incident laser beam into two orthogonally polarised overlapping parallel beams. The relative delay and amplitudes of the intensities scattered out of the orthogonal polarisations are indicative of the particle direction and velocity. Having obtained the direction of travel of the particle, its size is then obtained from the scattered intensity using Mie theory. 相似文献