Local receptivity in non-parallel boundary layer

The research on boundary-layer receptivity is the key issue for the laminarturbulent transition prediction in fluid mechanics. Many of the previous studies for local receptivity are on the basis of the parallel flow assumption which cannot accurately reflect the real physics. To overcome this disadvantage, local receptivity in the non-parallel boundary layer is studied in this paper by the direct numerical simulation (DNS). The difference between the non-parallel and parallel boundary layers on local receptivity is investigated. In addition, the effects of the disturbance frequency, the roughness location, and the multiple roughness elements on receptivity are also determined. Besides, the relations of receptivity with the amplitude of free-stream turbulence (FST), with the roughness height, and with the roughness length are ascertained as well. The Tollmien- Schlichting (T-S) wave packets are excited in the non-parallel boundary layer under the interaction of the FST and the localized wall roughness. A group of T-S waves are separated by the fast Fourier transform. The obtained results are in accordance with Dietz’s measurements, Wu’s theoretical calculations, and the linear stability theory (LST).     

Non-Parallel Acoustic Receptivity of a Blasius Boundary Layer Using an Adjoint Approach

Localized and non-localized acoustic receptivity for a Blasius boundary layer is investigated using the adjoint Parabolized Stability Equations. The scattering of an acoustic wave onto a hump, a rectangular roughness or a wall steady blowing and suction is described. Comparisons with local approaches, triple deck theory, direct numerical simulations and experiments are successfully shown. Non-parallel effects are discussed. For comparable parameters, the non-localized receptivity problem produces amplitudes one order of magnitude larger than for the case of localized receptivity. This revised version was published online in July 2006 with corrections to the Cover Date.     

Boundary-layer receptivity under interaction of free-stream turbulence and localized wall roughness

The boundary-layer receptivity under the interaction of free-stream turbu- lence (FST) and localized wall roughness is studied by the direct numerical simulation (DNS) and the fast Fourier transform. The results show that the Tollmien-Schlichting (T-S) wave packets superposed by a group of stability, neutral, and instability T-S waves are generated in the boundary layer. The propagation speeds of the T-S wave packets are calculated. The relation among the boundary-layer receptivity response, the amplitude of the FST, the roughness height, and the roughness width is determined. The results agree well with Dietz’s experiments. The effect of the roughness geometries on the receptivity is also studied.     

NUMERICAL STUDY OF LOCAL BOUNDARY LAYER RECEPTIVITY TO FREESTREAM VORTICAL DISTURBANCES

IntroductionTheproblemofhowthedisturbancesinthefreestream ,suchassoundwaveandvorticesetc .,excitethedisturbancewavesintheboundarylayeriscalledreceptivityproblem[1,2 ].Throughthiscoursetheinitialconditionsofdisturbance,suchasitsamplitude,frequency ,andphasearedetermined .ThedispersionrelationsoffreestreamdisturbancesaredifferentfromthoseofT_Swaves.Asaresult,suchdisturbancesaloneinthefreestreamdonotexciteT_Swavesinboundarylayer.But,whentheperiodicdisturbancesinboundarylayerforcedbyfreestreamdi…     

Three-dimensional receptivity of boundary layers

The paper presents a review of results of some recent (mainly experimental) studies devoted to a quantitative investigation of the problem of receptivity of the 2D and 3D boundary layers with respect to various 3D (in general) external perturbations. The paper concentrates on the mechanisms of excitation and development of stationary and travelling instability modes in a 3D boundary layer on a swept wing, as well as in 2D boundary layers including the Blasius flow and a self-similar boundary layer with an adverse pressure gradient. In particular, the following problems of the boundary-layer receptivity are discussed: (i) receptivity to localized 3D surface roughness, (ii) receptivity to localized 3D surface vibrations, (iii) acoustic receptivity in presence of 3D surface roughness, and (iv) acoustic receptivity in the presence of 3D surface vibrations. All experiments described in the paper were conducted using controlled disturbance conditions with the help of simulation of the stationary and non-stationary perturbations by means of several disturbance generators. This approach gives us the possibility to obtain quantitative results which are independent of any uncontrolled background perturbations of the flow and the experimental model. In contrast to the data obtained at “natural” environmental conditions these results can be directly compared with calculations without any significant assumptions about the physical nature of the disturbances under investigation. The complex (amplitude and phase) coefficients of the boundary-layer receptivity to external perturbations, obtained as functions of the disturbance frequency and the spanwise wavenumber (or the wave propagation angle), represent the main results of the experiments described. These results can be used for the evaluation of the initial amplitudes and phases of the instability modes generated by various external perturbations, as well as for quantitative verification of linear receptivity theories. Several examples of the comparison of experimental results with calculations are also presented in this paper. A brief analysis of the state-of-art in the field is performed and some general properties of different receptivity mechanisms are discussed.     

波纹壁对高超声速平板边界层稳定性的影响

高超声速边界层转捩会使飞行器表面热流和摩阻增加3～5倍,极大影响高超声速飞行器的性能.波纹壁作为一种可能的推迟边界层转捩的被动控制方法,具有较强的工程应用前景.文章研究了不同高度和安装位置的波纹壁对来流马赫数6.5的平板边界层稳定性的影响.采用直接数值模拟(DNS)得到层流场,并在上游分别引入不同频率的吹吸扰动以研究波纹壁对扰动演化的作用.对于不同位置的波纹壁,探究了其与同步点相对位置对其作用效果的影响,与相同工况下光滑平板的扰动演化结果进行了对比,发现当快慢模态同步点位于波纹壁上游时,波纹壁会对该频率的第二模态扰动起到抑制作用.当同步点位于波纹壁之中或者下游时,波纹壁对扰动的作用可能因为存在两种不同的机制而使得结果较为复杂.对于不同高度波纹壁,发现高度较低的波纹壁,其作用效果强弱与波纹壁高度成正相关,而更高的波纹壁则会减弱其作用效果.与DNS结果相比,线性稳定性理论可以定性预测波纹壁对高频吹吸扰动的作用,但在波纹壁附近的强非平行性区域误差较大.     

Numerical modeling of the receptivity of a supersonic boundary layer to entropy disturbances

Numerical modeling of the receptivity of a two-dimensional flat-plate boundary layer to entropy disturbances is carried out at the freestream Mach number M_∞ = 6. Low-intensity perturbations considered are in the form of temperature spots of various shapes and with different initial positions downstream of the shock. They are shown to be able to generate unstable disturbances in the boundary layer. This receptivity mechanism is relatively weak as compared with the receptivity to acoustic waves. When the entropy perturbations are introduced upstream of the bow shock, they first pass across the shock. Downstream of the shock this interaction generates acoustic waves which, in turn, penetrate into the boundary layer thus exciting unstable disturbances of a considerably greater amplitude than the temperature spots. Thus, the bow shock can change the receptivity mechanism.     

Acoustic receptivity of Mach 4.5 boundary layer with leading-edge bluntness

Boundary layer receptivity to two-dimensional slow and fast acoustic waves is investigated by solving Navier–Stokes equations for Mach 4.5 flow over a flat plate with a finite-thickness leading edge. Higher order spatial and temporal schemes are employed to obtain the solution whereby the flat-plate leading edge region is resolved by providing a sufficiently refined grid. The results show that the instability waves are generated in the leading edge region and that the boundary-layer is much more receptive to slow acoustic waves (by almost a factor of 20) as compared to the fast waves. Hence, this leading-edge receptivity mechanism is expected to be more relevant in the transition process for high Mach number flows where second mode instability is dominant. Computations are performed to investigate the effect of leading-edge thickness and it is found that bluntness tends to stabilize the boundary layer. Furthermore, the relative significance of fast acoustic waves is enhanced in the presence of bluntness. The effect of acoustic wave incidence angle is also studied and it is found that the receptivity of the boundary layer on the ‘windward’ side (with respect to the acoustic forcing) decreases by more than a factor of four when the incidence angle is increased from 0° to 45°. However, the receptivity coefficient for the ‘leeward’ side is found to vary relatively weakly with the incidence angle.      

Mechanism of three-dimensional boundary-layer receptivity

Boundary-layer receptivity is always a hot issue in laminar-turbulent transition. Most actual laminar-turbulent transitions belong to three-dimensional flows. An infinite back-swept flat-plate boundary layer is a typical three-dimensional flow. Study of its receptivity is important both in theory and applications. In this paper, a freestream turbulence model is established. A modified fourth-order Runge-Kutta scheme is used for time marching, and compact finite difference schemes are used for space discretization. On these bases, whether unsteady cross-flow vortices can be excited in the three-dimensional boundary layer(the infinite back-swept flat-plate boundary layer) by free-stream turbulence is studied numerically. If so, effects of the level and the direction of free-stream turbulence on the three-dimensional boundary-layer receptivity are further studied. Differences of the three-dimensional boundary-layer receptivity are then discussed by considering the non-parallel effect, influence of the leading-edge stagnation point of the flat plate, and variation of the back-swept angle separately. Intensive studies on the three-dimensional boundary-layer receptivity will benefit the development of the hydrodynamic stability theory, and provide a theoretical basis for prediction and control of laminar-turbulent transition.     

Influence of acoustics and the flow regime in the boundary layer on nozzle walls on the mixing layer of an immersed jet

Experimental determinations were made of the width of the mixing layer and the level of turbulent pulsations in the initial section of a subsonic circular immersed jet for different parameters of the boundary layer on the nozzle walls and in the presence of acoustic excitation. It was established that the rate of expansion of the turbulent mixing layer depends on the flow regime in the boundary layer. For laminar initial boundary layer, external acoustic excitation can lead to a decrease in the expansion velocity of the mixing layer and of the intensity of the velocity pulsations on the jet axis within the initial section. If the frequency and amplitude of acoustic excitation at which a decrease in the rate of expansion of the mixing layer and of the pulsation intensity was observed remained unchanged, the influence of the acoustics disappeared when the boundary layer became turbulent. The acoustic vibrations influenced the subsonic jets by generating vortex perturbations when they interact with the edge of the nozzle.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 36–42, November–December, 1982.We are grateful to K. I. Artamonov, now deceased, for support and discussing the results, and O. I. Navoznov and S. F. Agafonov for help in organizing and performing the experiments.     

基于单个压电振子的湍流边界层主动控制

利用安装在壁面上的单个压电振子周期振荡,采用开环主动控制方案,实现了对平板湍流边界层相干结构猝发的主动控制和壁湍流减阻.根据不同的输入电压幅值和频率,完成了10种工况的实验.在压电振子下游2mm处,用热线风速仪和迷你热线单丝探针,精细测量湍流边界层不同法向位置瞬时流向速度信号的时间序列,分析了在Re_?=2183压电振子振动对湍流边界层平均速度剖面、减阻率和相干结构猝发过程的影响.实验结果表明,施加控制的工况使平均速度剖面对数律层上移,产生减阻效果;压电振子振幅越大,减阻率越高,减阻效果越明显;通过对施加控制前后流向瞬时速度的多尺度湍涡结构脉动动能的尺度分析,当压电振子振动频率与壁湍流能量最大尺度的猝发频率相近时,减阻率达到最大,为25%,说明控制壁湍流能量最大尺度相干结构的猝发是实现壁湍流减阻的关键;通过对比相干结构猝发的流向速度分量条件相位平均波形,发现施加控制的工况中相干结构猝发流向速度分量的波形幅值明显降低,且流向速度在扫掠后期高速阶段迅速衰减,缩短了高速流体的下扫过程,说明压电振子的振动能抑制相干结构的高速流体下扫过程,减弱高速流体与壁面的强烈剪切过程,并使近壁区域相干结构的振幅显著减弱,迁移速度加快,从而减小壁面摩擦阻力.      

Acoustic Field Effect on Laminar Turbulent Transition on a Swept Wing in the Favorable Pressure Gradient Region

The development of disturbances in a three-dimensional boundary layer on a swept wing model is studied both under natural conditions and for artificial excitation of traveling waves by an acoustic field. It is found that steady-state streamwise structures are formed in the three-dimensional boundary layer; under natural conditions a wave packet leading to turbulence is detected. When the flow is exposed to the action of an acoustic field at a frequency from the wave packet, disturbances whose velocity along the streamwise structures is equal to 0.55 of the oncoming flow velocity are formed, while the laminar-turbulent transition is displaced upstream.     

Roughness-induced generation of crossflow vortices in three-dimensional boundary layers

The receptivity theory of Goldstein and Ruban is extended within the nonasymptotic (quasi-parallel) framework of Zavol'skii et al. to predict the roughness-induced generation of stationary and nonstationary instability waves in three-dimensional, incompressible boundary layers. The influence of acoustic-wave orientation, as well as that of different types of roughness geometries, including isolated roughness elements, periodic arrays, and two-dimensional lattices of compact roughness shapes, as well as random, but spatially homogeneous roughness distributions, is examined. The parametric study for the Falkner-Skan-Cooke family of boundary layers supports our earlier conjecture that the initial amplitudes of roughness-induced stationary vortices are likely to be significantly larger than the amplitudes of similarly induced nonstationary vortices in the presence of acoustic disturbances in the free stream. Maximum unsteady receptivity occurs when the acoustic velocity fluctuation is aligned with the wave-number vector of the unsteady vortex mode. On the other hand, roughness arrays that are oriented somewhere close to the group velocity direction are likely to produce higher instability amplitudes. Limitations of the nonasymptotic theory are discussed, and future work is suggested.Financial support for this work was provided by the Theoretical Flow Physics Branch at the NASA Langley Research Center, Hampton, VA 23681, under Contract No. NAS1-19299.     

Stabilization of a laminar boundary layer by an active surface-localized action

A method for rapidly damping instability waves is proposed as a means of actively controlling a perturbed gas boundary layer flow. The method is based on the use of an active body surface segment which reacts to an instantaneous local pressure variation by producing a proportional local wall displacement normal to the surface with a constant time lag calculated to result in the optimal suppression of unstable disturbances. It is shown that in the one-frequency case the wave number spectrum of the optimal control law contains multiple eigenvalues. The effectiveness of the method is demonstrated over a wide range of variation of the instability wave frequencies and directions. The propagation of an instability wave over an active segment of finite length is calculated using an integral-equation method based on solving the problem of boundary layer flow receptivity to surface vibration. Explicit formulas describing the process of scattering of the instability wave into stable modes at the junction point of the rigid and active surfaces are obtained using the Fourier method and the integral Cauchy theorem.     

Plane mixing layers from parallel and non-parallel merging of two streams

Two types of mixing layers produced from two streams merging at 0° and 18° have been investigated. Each type of mixing layer was produced with velocity ratios 0.7, 0.8 and 0.9 and measurements were taken at six streamwise locations. The boundary layers were untripped and initially turbulent in all cases. Both types of mixing layers were found to attain a self-similar state for velocity ratios 0.7 and 0.8 but failed for 0.9 within the measurement domain. It appears that the mixing layer flow becomes self-similar earlier when merging at 18° than at 0°. With increasing velocity ratio, the development distance was increased and the splitter wake played a dominant role in the development of the mixing layers. The mixing layers from non-parallel merging streams (18°) were found to have higher growth in the near-field than those from parallel merging streams (0°). Both types of mixing layers were found to decrease in growth with increasing velocity ratio, though they spread more at the high-speed side. Published online: 23 November 2002     

Experiments on localized disturbances in a flat plate boundary layer. Part 1. The receptivity and evolution of a localized free stream disturbance

The receptivity of a laminar boundary layer to free stream disturbances has been experimentally investigated through the introduction of deterministic localized disturbances upstream of a flat plate mounted in a wind tunnel. Hot-wire measurements indicate that the spanwise gradient of the normal velocity component (and hence the streamwise vorticity) plays an essential role in the transfer of disturbance energy into the boundary layer. Inside the laminar boundary layer the disturbances were found to give rise to the formation of longitudinal structures of alternating high and low streamwise velocity. Similar streaky structures exist in laminar boundary layers exposed to free stream turbulence, in which the disturbance amplitude increases in linear proportion to the displacement thickness. In the present study the perturbation amplitude of the streaks was always decaying for the initial amplitudes used, in contrast to the growing fluctuations that are observed in the presence of free stream turbulence. This points out the importance of the continuous influence from the free stream turbulence along the boundary layer edge.     

Excitation of Tollmien-Schlichting waves py a vibrating section of a surface with flow round it

In the context of the problem of describing the transition of a laminar boundary layer to a turbulent, great interest attaches to the study of susceptibility, i.e., of the reaction of the flow to various external influences, such as acoustic perturbations, surface roughness, vibration of the wall, turbulence of the unperturbed flow, etc. A general property of the effect of the factors mentioned above on the flow in a laminar boundary layer was discovered in experimental and numerical studies and is noted in [1]: in all cases an external forcing perturbation leads to the excitation of normal modes of oscillation in the boundary layer which propagate downstream, namely, Tollmien-Schlichting waves. There is an analytical calculation in [2, 3] of the amplitude of a wave excited by harmonic oscillations of a narrow band on the surface of a plane plate, the Reynolds number having been assumed to be infinitely large, and the frequency of the vibrator corresponding to the neighborhood of the lower branch of the neutral cuirve [4], In [5] the amplitude of the wave of instability generated is calculated by the method of expansion of the solution in a biorthogonal system of eigenfunctions. The amplitudes of the Tollmien-Schlichting waves are calculated below by means of a generalization of the method of [2] for the whole range of Reynolds numbers and frequencies of the vibrator corresponding to the region of instability: for moderate Reynolds numbers the problem is solved numerically, while for large Reynolds numbers an asymptotic solution is constructed.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 46–51, July–August, 1987.The author is grateful to M. N. Kogan and V. V. Mikhailov for useful discussions of the results of the study.     

Global stability analysis of axisymmetric boundary layer over a circular cylinder

This paper presents a linear global stability analysis of the incompressible axisymmetric boundary layer on a circular cylinder. The base flow is parallel to the axis of the cylinder at inflow boundary. The pressure gradient is zero in the streamwise direction. The base flow velocity profile is fully non-parallel and non-similar in nature. The boundary layer grows continuously in the spatial directions. Linearized Navier–Stokes (LNS) equations are derived for the disturbance flow quantities in the cylindrical polar coordinates. The LNS equations along with homogeneous boundary conditions forms a generalized eigenvalues problem. Since the base flow is axisymmetric, the disturbances are periodic in azimuthal direction. Chebyshev spectral collocation method and Arnoldi’s iterative algorithm is used for the solution of the general eigenvalues problem. The global temporal modes are computed for the range of Reynolds numbers and different azimuthal wave numbers. The largest imaginary part of the computed eigenmodes is negative, and hence, the flow is temporally stable. The spatial structure of the eigenmodes shows that the disturbance amplitudes grow in size and magnitude while they are moving towards downstream. The global modes of axisymmetric boundary layer are more stable than that of 2D flat-plate boundary layer at low Reynolds number. However, at higher Reynolds number they approach 2D flat-plate boundary layer. Thus, the damping effect of transverse curvature is significant at low Reynolds number. The wave-like nature of the disturbance amplitudes is found in the streamwise direction for the least stable eigenmodes.     

Higher order stability effects in a natural convection boundary layer over a vertical heated wall

 The stability of a laminar boundary layer flow under natural convection on a vertical isothermally heated wall is studied analytically. The analysis is performed by using two different two-dimensional linear models: (1) The non-parallel flow model in which the steady mean flow as well as the disturbance amplitude functions can change in the streamwise direction; (2) The parallel flow model in which the effects of the mean flow and disturbance changes in the streamwise direction are neglected. The linear non-parallel stability analysis is based on the so-called parabolised stability equations (PSEs) which have been successfully applied to the stability analysis of forced convection boundary layers. In this study the PSE equations are applied to natural convection boundary layers in order to show the difference between parallel and non-parallel stability analysis. A second part of this study deals with the effects of variable properties, which are always present in natural convection flows. They are analysed by an extended version of the Orr–Sommerfeld equation (EOSE). Received on 31 May 2000     

Large Eddy Simulations in Turbines: Influence of Roughness and Free-Stream Turbulence

The individual and coupled effects of the incoming free-stream turbulence (FST) and surface roughness on the transition of a separated shear layer over a flat plate is numerically investigated using Large eddy simulation (LES). The upper wall of the test section is inviscid and specifically contoured to impose a streamwise pressure distribution over the flat plate to simulate the suction surface of a low pressure turbine (LPT) blade. The interaction of the streamwise streaks due to FST and roughness with the separated shear layer is captured. The streaks induced by FST are intermittent in nature and the streaks due to roughness are steady for a given topology of the rough surface. Both FST and roughness promoted near-wall mixing. The ‘net effect’ of mixing in the pre-separated region is manifested by a shift the inflection point of the velocity profile towards the wall. This resulted in the upstream shift of the transition point and a significant reduction in the size of the separation bubble. The combined effect of FST and roughness further reduced the size of separation bubble. The streamwise evolution of the boundary layer parameters has been compared for different cases. The potential ‘roughness benefit’ obtained in the case of highly loaded turbine blades in terms of its considerable reduction of profile loss is also shown.