Thermal-buckling of thin annular plates under multiple loads

On the basis of Von Kármán equations,the thermal-buckling of thin annular platessubjected to a field of non-uniform axisymmetric temperature and a variety of boundaryconditions is discussed.The linearized problem is analyzed and stability boundaries whichcharacterize instability of a plate are obtained by means of numerical and analysis methods.     

热-机载荷下不规则夹杂的奇异性应力场分析

基于有限元特征分析法得到的夹杂角部场数值特征解开发了一种超级奇异单元模型,并将其与普通四节点单元紧密结合,用于热-机载荷下夹杂角端部的应力场分析。在数值计算中,考察了热-机载荷下不同弹性比和不同夹杂尺寸的应力强度因子,并将所得结果与文献解和传统有限元方法解比对。结果表明,本文方法对热-机耦合条件下的不规则夹杂角端部的热弹性应力分析极为有效,可避免局部网格的高度加密,并提高计算效率。模型在复合材料夹杂的局部强度问题分析方面具有很好的实用性。     

Structural response of stiffened plates in similitude under a turbulent boundary layer excitation

In structural dynamics, similitude laws usually deal with simple configurations as thin flat plates with point forces. Only recently, few papers have analyzed stiffened shells or stochastic pressure loads.This research activity extends the applicability of some similitude laws, developed for thin flat plates under a turbulent boundary layer load, to ribbed plates forced by the same wall pressure fluctuations.The work addresses the problem of designing a scaled experimental test-article and, successively, of re-modulating the measured data in order to get the structural response of an original (unscaled) configuration.Due to the complexity of the structural domain, the design of a scaled configuration leads to a distorted similitude. Then, a simple approach, to circumvent the distortion effects, is proposed.     

Scale effects on nonlocal buckling analysis of bilayer composite plates under non-uniform uniaxial loads

Scale effects are studied on the buckling behavior of bilayer composite plates under non-uniform uniaxial compression via the nonlocal theory. Each isotropic plate is composed of a material that is different from others, and the adhesive between the plates is modeled as the Winkler elastic medium. According to the symmetry, effects of the Winkler non-dimensional parameter, the thickness ratio, the ratio of Young''s moduli, and the aspect ratio are also considered on the buckling problem of bilayer plates, where only the top plate is under the uniaxial compression. Numerical examples show that the Winkler elastic coefficient, the thickness ratio, and the ratio of Young''s moduli play decisive roles in the buckling behavior. Nonlocal effect is significant when the high-order buckling mode occurs or the aspect ratio is small.     

一种新的计算各向异性材料裂纹尖端应力强度因子杂交元法

利用有限元特征分析法研究了平面各向异性材料裂纹端部的奇性应力指数以及应力场和位移场的角分布函数,以此构造了一个新的裂纹尖端单元。文中利用该单元建立了研究裂纹尖端奇性场的杂交应力模型,并结合Hellinger-Reissner变分原理导出应力杂交元方程,建立了求解平面各向异性材料裂纹尖端问题的杂交元计算模型。与四节点单元相结合,由此提出了一种新的求解应力强度因子的杂交元法。最后给出了在平面应力和平面应变下求解裂纹尖端奇性场的算例。算例表明,本文所述方法不仅精度高,而且适应性强。     

求解矩形夹层板在集中载荷下的稳定问题

在考虑了横向切应力和横向正应力对夹层板稳定影响的情况下,给出了矩形夹层板结构屈曲失稳的控制方程、基本解以及边界条件。应用功的互等定理求解了在均布载荷作用下的矩形夹层板的屈曲失稳问题。     

Numerical investigation on the position of holes for reducing stress concentration in composite plates with bolted and riveted joints

This paper studies the effects of fiber orientaion and holes position on stress concentration and the determination of weakened areas in the composite of glass fiber reinforced epoxy resin around the hole for joints by using the finite element method. In this study, for the observation of areas affected by stress concentration Tsai-Wu failure criterion is used to determine the failed elements and ANSYS Software is implemented for modeling. In order to compare the effect of geometric parameters on stress concentration around the holes, two types of hole position arrangement along with fibers orientation have been studied. Results show that the stress concentration coefficient is lower in the second type of holes arrangement in comparison with the first type for the same component dimensions. Increasing the distance from hole center to upper or lower edge of the sample and also decreasing the distance between holes, would result in an increase in the stress concentration.     

有限厚双边U型切口板的三维弹塑性有限元分析

针对单向拉伸载荷作用下的有限厚双边 U型切口板 ,本文对其切口根部的三维效应进行了详细的三维弹塑性大变形有限元分析 ,得到了不同于平面切口问题的新结果 :( 1 )在线弹性阶段 ,三维切口根部的应力集中因子 Kt高于二维情形 ,且 Kt在板厚 ( B)约为 8倍切口根部半径 (ρ)时达到峰值 ;进入塑性后 ,切口根部的 Kt随载荷水平的增加逐渐下降 ,并介于平面应力和平面应变情形之间 ;( 2 )切口前缘等效应变εe的最大值出现在约束最高的中面 ,且可比约束最低的自由表面处的应变值高一倍 ;( 3)薄板中 ,塑性区尺寸 xp 的最大值不是出现在约束较低的自由表面 ,而是出现在约束较高的中面 ,但随 B/ρ的增大逐渐向自由表面外推 ;( 4 )面内应力比 Tx在切口根部塑性区内的分布对板厚和载荷水平不敏感 ,可以用 Hill的滑移线解很好地近似。另外 ,对三维影响区内一些重要的三维约束参量进行了详细分析 ,总结了它们的三维分布规律。     

椭圆形孔扩张弹性分析

圆孔扩张理论作为一种相对成熟的理论工具已经广泛运用于岩土工程中的各类问题,但是对于初始孔为椭圆孔的扩孔问题,圆孔扩张理论并不适用.基于保角变换的方法将原物理平面上初始椭圆孔洞的外部映射到像平面上的单位圆外部,将原物理平面上由于椭圆孔洞扩张所产生的位移边界条件转换到像平面上,利用平面复变弹性理论,得到初始椭圆形孔洞孔扩张的弹性解.将论文椭圆孔扩张的退化解与传统圆孔扩张的弹性解进行对比分析,验证椭圆孔扩张弹性解的正确性.续而,针对一算例详细分析了椭圆孔扩张的弹性力学特性.研究结果表明,椭圆孔的退化解与传统的圆孔扩张弹性解完全一致,椭圆孔在弹性扩张过程中长轴方向比短轴方向较难扩张,长轴方向需要的扩张压力比短轴方向的要大.此外,当扩张率a2/a1=0.11/0.1=1.1时,扩张的影响半径为10倍的孔径左右.     

应用有限差分法的轴向流作用下叠层板的稳定性和模态分析

分析了轴向流作用下两端简支和固支叠层板的稳定性。基于势流理论建立轴向流作用下叠层板的流固耦合系统连续型运动方程,基于有限差分法建立了流场网格和结构网格统一的离散化格式,流场势函数用板的横向振动位移变量来表示,得到关于叠层板的横向振动位移变量的控制方程。求解控制方程的广义特征值,计算分析结果表明,两端简支和两端固支模型发生屈曲失稳,且得到了屈曲失稳临界速度与叠层板的层数和无量纲板间距的关系。此外,轴向流作用下叠层板的一阶模态并不是叠层板的同相弯曲模态。     

用加权余量法分析固支圆板和环板在Mises屈服条件下的极限荷载

应用加权余量法求出了承受线性荷载的固支圆板和承受均布荷载的内边界支承环板在 Mises屈服条件下的极限荷载的近似值 ,并与最大弯矩极限条件结果进行了比较 ,说明本文计算结果较合理。     

Stress state of a piezoelectric ceramic body with a plane crack under antisymmetric loads

The static equilibrium of an electroelastic transversely isotropic space with a plane crack under antisymmetric mechanical loads is studied. The crack is located in the plane of isotropy. Relationships are established between the stress intensity factors (SIFs) for an infinite piezoceramic body and the SIFs for a purely elastic body with a crack of the same form under the same loads. This makes it possible to find the SIFs for an electroelastic body without the need to solve specific electroelasitc problems. As an example, the SIFs are determined for a piezoelastic body with penny-shaped and elliptic cracks under shear __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 2, pp. 32–42, February 2006.     

各向异性两相材料尖劈奇性场的非协调元分析

提出了一个基于位移的、分析柱状各向异性两相材料尖劈端部邻域的奇性位移场和应力场问题的非协调元特征分析法. 该方法从柱状扇区的散度定理出发，将柱状扇区控制方程的弱式化为一个与虚功原理相同形式的方程，采用一种新的非协调元技术把所导出的``虚功原理'转化为标准一阶特征方程的求解问题. 非协调元法中，尖劈端部邻域的位移场假定没有采用奇异变换技术，有限元的单元形式是一维的. 将柱状各向异性两相材料尖劈视为``广义平面应变'问题，位移场与坐标z无关，只关注界面端的幂奇异性而不考虑对数奇异性. 运用该方法给出了柱状各向异性两相材料尖劈端部奇性应力指数、奇性位移角分布和应力角分布的算例. 所有的计算结果表明，该方法使用的单元少而且精度较高.     

Non-linear analysis of functionally graded plates under transverse and in-plane loads

Large deflection and postbuckling responses of functionally graded rectangular plates under transverse and in-plane loads are investigated by using a semi-analytical approach. Material properties are assumed to be temperature-dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. The plate is assumed to be clamped on two opposite edges and the remaining two edges may be simply supported or clamped or may have elastic rotational edge constraints. The formulations are based on the classical plate theory, accounting for the plate-foundation interaction effects by a two-parameter model (Pasternak-type), from which Winkler elastic foundation can be treated as a limiting case. A perturbation technique in conjunction with one-dimensional differential quadrature approximation and Galerkin procedure are employed in the present analysis. The numerical illustrations concern the large deflection and postbuckling behavior of functional graded plates with two pairs of constituent materials. Effects played by volume fraction, the character of boundary conditions, plate aspect ratio, foundation stiffness, initial compressive stress as well as initial transverse pressure are studied.     

基于等几何有限元法的功能梯度微板热力耦合屈曲预测

基于修正偶应力理论和Kirchhoff板理论,建立了功能梯度微板热力耦合屈曲等几何有限元模型。该模型仅包含一个材料尺度参数,能够描述尺度效应现象,且满足修正偶应力理论的高阶连续性要求。基于虚功原理推导了功能梯度微板热力耦合屈曲等几何有限元方程。通过对板的典型算例分析,讨论了材料尺度参数、边长比及梯度指数对板稳定性的影响。结果表明,本文模型预测的屈曲载荷总是大于宏观理论的结果,即捕捉到了尺度效应现象;随着临界屈曲力的增加,临界屈曲热载荷线性减少;此外,边长比和梯度指数也对微板的稳定性产生一定影响。     

Numerical analysis of finite amplitude motion of waves and a moored floating body under severe storm conditions

The motion of a moored floating body under the action of wave forces, which is influenced by fluid forces, shape of the floating body and mooring forces, should be analysed as a complex coupled motion system. Especially under severe storm conditions or resonant motion of the floating body it is necessary to consider finite amplitude motions of the waves, the floating body and the mooring lines as well as non-linear interactions of these finite amplitude motions. The problem of a floating body has been studied on the basis of linear wave theory by many researchers. However, the finite amplitude motion under a correlated motion system has rarely been taken into account. This paper presents a numerical method for calculating the finite amplitude motion when a floating body is moored by non-linear mooring lines such as chains and cables under severe storm conditions.     

任意多椭圆孔多裂纹无限大各向异性板应力强度因子求解的一种新方法

采用各向异性体平面弹性理论中的复势方法,应用保角变换技术,以F aber级数为工具,导出含任意多椭圆孔和裂纹群无限大各向异性板在远场载荷作用下其应力场和位移场的级数解,并在此基础上利用断裂力学方法确定裂纹尖端的应力强度因子,通过算例讨论了材料参数及裂纹、孔的尺寸等对应力强度因子的影响规律,得出了一些有益的结论。数值结果表明本文方法具有计算精度高、收敛速度快、方便快捷等优点,有利于全面系统地研究各参数对结构断裂性能的影响。     

基于ANSYS的缺口和裂纹对结构应力分布影响有限元研究

缺口和裂纹都会对结构的应力分布产生影响，过去对这两个领域的研究一直平行发展，交叉领域的研究比较少。本文应用有限元软件ANSYS，分析了金属材料中缺口根部和裂纹尖端的应力分布。有限元计算结果与Taylor^[1]的理论分析一致，即在缺口和裂纹根部存在一临界距离，大于这一临界距离时，缺口和裂纹具有类似的应力值，并都易受尺寸因素的影响；临界距离内的应力与最大应力之比只同缺口半径有关，而与结构绝对尺寸无关。文中并对缺口和裂纹交叉领域以后的研究方向提出了看法。     

Stress singularity analysis of anisotropic multi-material wedges under antiplane shear deformation using the symplectic approach

Symplectic approach has emerged a popular tool in dealing with elasticity problems especially for those with stress singularities. However, anisotropic material problem under polar coordinate system is still a bottleneck. This paper presents a subfield method coupled with the symplectic approach to study the anisotropic material under antiplane shear deformation. Anisotropic material around wedge tip is considered to be consisted of many subfields with constant material properties which can be handled by the symplectic approach individually. In this way, approximate solutions of the stress and displacement can be obtained. Numerical examples show that the present method is very accurate and efficient for such wedge problems. Besides, this paper has extended the application of the symplectic approach and provides a new idea for wedge problems of anisotropic material.