Directive nature of the nitration of the oximes of 2-acetylthiophene and 2-propionylthiophene

A method of obtaining pure 2-acetyl- and 2-propionyl-5-nitrothiophenes by nitrating the oximes of the corresponding ketones with the subsequent isolation from the mixtures formed of the pure oximes of the 2-acyl-5-nitrothiophenes and their saponification has been developed. The pure 2-acetyl- and 2-propionyl-4-nitrothiophenes have been isolated by crystallization from the products of the nitration of the corresponding ketones, which form in each case a mixture of the corresponding 2-acyl-4-nitro- and 2-acyl-5-nitrothiophenes containing about 90% of the 4-nitro isomer.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1483–1486, November, 1973.     

Catalysis in aromatic nucleophilic substitution. Note II. Piperidino substitution reactions of some 2-l-3-nitrothiophenes and 2-l-5-nitrothiophenes in methanol and benzene

The rates of piperidino substitution of some 2-L-3-nitrothiophenes (I) and 2-L-5-nitrothiophenes (II) (L = Cl, Br, I, OC₆H₄NO₂-p, and SO₂Ph) have been measured in methanol and in benzene at various piperidine concentrations. The reactivity of compounds (I) is not affected by the piperidine concentration in both methanol and benzene, except for the case of L = I (Ic). Probably due to association effects, the reactivity of Ic in benzene decreases as the piperidine concentration is increased. The reactions of compounds II follow overall second order kinetics in methanol while in benzene a different behaviour is observed as a function of the nature of the leaving group. In fact, the piperidino substitutions of IIa-c (L = Cl, Br, I) are mildly accelerated at high piperidine concentrations (a moderate solvent effect); on the contrary the reactivity of IId and e shows a strong dependence on the piperidine concentration, pointing out a genuine base catalysis.     

[(C_5H_4CH_3)_2HoN_4CPh]_2·[(C_5H_4CH_3)(C_5H_5)HoN_4CPh]_2的合成和晶体结构

（C5H4CH3）3Ho和（C5H4CH3）2Ho（C5H5）与5-苯基四唑（HN4CPh）在THF中反应，得到复合产物[（C5H4CH3）2HoN4CPh]2·[（C5H4CH3）（C5H5）HoN4CPh]2，该晶体属三斜晶系，P1空间群，晶胞参数为a=9．386（3），b=13．071（3），c=16.571（2）A，a=86．90（1），β=74．61（2），γ=77.30（2）°，V=1912．2（8）A3，Z=1，Dc=1.602g／cm3，Mr=922．61，μ=41．92cm－1，F（000）=896，最终偏离因子R=0．041，Rw=0．056．晶体数据显示，在同一个晶胞里有两个组成不同的分子，每一个分子都是具有对称中心的四唑基桥二聚体结构，其桥环单元-HoN3HoN3-是平面型的。每个钬原子分别被两个茂基和3个四唑基氮原子配位，形成1个边桥变形四面体构型。     

Structural diversity of lithium sulfenamides: 7Li NMR studies in solution and crystal structures of [Li2(eta2-(CH3)3C-NS-C6H4CH(3)-4)2(THF)2] and [Li2(eta1-4-CH3C6H4-NS-C6H4CH(3)-4)2(THF)4

Two lithium sulfenamides were prepared by reaction of (CH(3))(3)C-N(H)-S-C(6)H(4)CH(3)-4 (1) and 4-CH(3)C(6)H(4)-N(H)-S-C(6)H(4)CH(3)-4 (2) with an alkyllithium. The unsolvated sulfenamide Li[(CH(3))(3)C-NS-C(6)H(4)CH(3)-4] (3) was soluble enough for variable-temperature (VT) (7)Li NMR to provide evidence of a dynamic exchange of oligomers in solution. The crystal structures of the solvated sulfenamides of [Li(2)(eta(2)-(CH(3))(3)C-NS-C(6)H(4)CH(3)-4)(2)(THF)(2)] (4) and of [Li(2)(eta(1)-4-CH(3)C(6)H(4)-NS-C(6)H(4)CH(3)-4)(2)(THF)(4)] (6) consisted of dimers in which the anions display different hapticities. The VT (7)Li NMR spectra of 4 suggest that the two different structures exist in equilibrium in toluene-THF mixtures. These compounds are easily oxidized to the neutral thioaminyl radicals as identified by EPR spectroscopy.     

Photochemical investigation of Roussin's red salt esters: Fe2(mu-SR)2(NO)4

The photochemistry of various Roussin's red ester compounds of the general formula Fe(2)(SR)(2)(NO)(4), where R = CH(3), CH(2)CH(3), CH(2)C(6)H(5), CH(2)CH(2)OH, and CH(2)CH(2)SO(3)(-), were investigated. Continuous photolyses of these ester compounds in aerated solutions led to the release of NO with moderate quantum yields for the photodecomposition of the ester (Phi(RSE) = 0.02-0.13). Electrochemical studies using an NO electrode demonstrated that 4 mol of NO are generated for each mole of ester undergoing photodecomposition. Nanosecond flash photolysis studies of Fe(2)(SR)(2)(NO)(4) (where R = CH(2)CH(2)OH and CH(2)CH(2)SO(3)(-)) indicate that the initial photoreaction is the reversible dissociation of NO. In the absence of oxygen, the presumed intermediate, Fe(2)(SR)(2)(NO)(3), undergoes second-order reaction with NO to regenerate the parent cluster with a rate constant of k(NO) = 1.1 x 10(9) M(-1) s(-1) for R = CH(2)CH(2)OH. Under aerated conditions the intermediate reacts with oxygen to give permanent photochemistry.     

Substituted N-picolylethylenediamines of the type (ArNHCH2CH2){(2-C5H4N)CH2}NR [R = Me, 4-CH2=CH(C6H4)CH2, (2-C5H4N)CH2] and their transition metal(II) halide complexes

Alkylation of (ArNHCH2CH2){(2-C5H4N)CH2}NH with RX [RX = MeI, 4-CH2=CH(C6H4)CH2Cl) and (2-C5H5N)CH2Cl] in the presence of base has allowed access to the sterically demanding multidentate nitrogen donor ligands, {(2,4,6-Me3C6H2)NHCH2CH2}{(2-C5H4N)CH2}NMe (L1), {(2,6-Me3C6H3)NHCH2CH2}{(2-C5H4N)CH2}NCH2(C6H4)-4-CH=CH2 (L2) and (ArNHCH2CH2){(2-C5H4N)CH2}2N (Ar = 2,4-Me2C6H3 L3a, 2,6-Me2C6H3 L3b) in moderate yield. L3 can also be prepared in higher yield by the reaction of (NH2CH2CH2){(2-C5H4N)CH2}2N with the corresponding aryl bromide in the presence of base and a palladium(0) catalyst. Treatment of L1 or L2 with MCl2 [MCl2 = CoCl2.6H2O or FeCl2(THF)1.5] in THF affords the high spin complexes [(L1)MCl2](M = Co 1a, Fe 1b) and [(L2)MCl2](M = Co 2a, Fe 2b) in good yield, respectively; the molecular structure of reveals a five-coordinate metal centre with bound in a facial fashion. The six-coordinate complexes, [(L3a)MCl2](M = Co 3a, Fe 3b, Mn 3c) are accessible on treatment of tripodal L3a with MCl2. In contrast, the reaction with the more sterically encumbered leads to the pseudo-five-coordinate species [(L3b)MCl2](M = Co 4a, Fe 4b) and, in the case of manganese, dimeric [(L3b)MnCl(mu-Cl)]2 (4c); in 4a and 4b the aryl-substituted amine arm forms a partial interaction with the metal centre while in 4c the arm is pendant. The single crystal X-ray structures of , 1a, 3b.MeCN, 3c.MeCN, 4b.MeCN and 4c are described as are the solution state properties of 3b and 4b.     

Ag4L2 nanocage as a building unit toward the construction of silver metal strings

Self-assembly of AgNO 3 with the semirigid tetratopic ligands 1,2,4,5-tetrakis(benzoimidazol-1-ylmethyl)benzene (TBim) and 1,2,4,5-tetrakis(5,6-dimethylbenzimidazol-1-ylmethyl)benzene (TDMBim) afforded compounds [Ag 4(mu 4-TBim) 2(mu 2-eta (2)-NO 3) 2](NO 3) 2. (1)/ 2CH 2Cl 2.2CH 3OH ( 1mu (1)/ 2CH 2Cl 2.2CH 3OH) and [(NO 3 (-)) subset{Ag 4(mu 4-TDMBim) 2}][Ag(NO 3) 2](NO 3) 2.CH 2Cl 2.CH 3OH.4H 2O ( 2.CH 2Cl 2.CH 3OH.4H 2O), respectively. The structures of 1 and 2 were characterized by single-crystal X-ray diffraction analysis. Both compounds adopt a M 4L 2-type tetragonal metalloprismatic cage structure, [Ag 4(mu 4-L) 2] (4+), with strong intramolecular silver-silver contacts. Compound 1 is a discrete species, while compound 2 is a novel infinite chainlike supramolecular array involving silver metal strings assembled from a [Ag 4(mu 4-L) 2] (4+) nanocage and silver linkages. Thermogravimetric analyses of 1. (1)/ 2CH 2Cl 2.2CH 3OH and 2.CH 3OH.4H 2O indicate that the Ag 4L 2-cage structures of 1 and 2 both are thermally stable up to 330 degrees C. Results from an in situ (1)H NMR study of AgNO 3 and TDMBim in different molar ratios unambiguously revealed the successive self-organization process, in which self-organization of the molecular cage takes place initially followed by crystallization of the corresponding supramolecular arrays with silver metal strings.     

One-pot synthesis of substituted 3-amino-2-nitrothiophenes and selenophenes

In this work, we described an easy preparation of substituted 3-amino-2-nitrothiophenes and selenophenes. Substituted β-chloroacrylonitriles were reacted with sodium sulfide or sodium selenide and bromonitromethane to yield the expected compounds in a one-pot three-step procedure in good yields.     

A molecular Mo4Bi4 framework composed exclusively of unsupported metal-metal bonds

Reaction of [Cp(2)MoH(2)] with bismuth allyloxide, [Bi{OCH(CH(3))CH==CH(2)}(3)], gave rise to an extended octanuclear complex wherein two cyclic Mo(2)Bi(2) units composed of four Mo-Bi bonds are linked by a Bi-Bi bond. The fact that the construction of such an assembly could be accomplished only in the case of a monomethylation of the parent allyl residue demonstrates a subtle substituent effect.     

Preferred bonding motif for indium aminoethanethiolate complexes: structural characterization of (Me2NCH2CH2S)2InX/SR (X = Cl, I; R = 4-MeC6H4, 4-MeOC6H4)

The metathesis reaction of InCl3 with Me2NCH2CH2SNa or the redox reaction of indium metal with elemental iodine and the disulfide (Me2NCH2CH2S)2 yield the indium bis(thiolate) complexes (Me2NCH2CH2S)2InX [X = Cl (3) and I (4)], respectively. Compounds 3 and 4 may be further reacted with the appropriate sodium thiolate salts to afford the heteroleptic tris(thiolate) complexes (Me2NCH2CH2S)2InSR [R = 4-MeC6H4 (5), 4-MeOC6H4 (6), and Pr (7)]. Reaction of 2,6-Me2C6H3SNa with 4 affords (Me2NCH2CH2S)2InS(2,6-Me2C6H3) (8), while no reaction is observed with 3, suggesting a greater reactivity for 4. All isolated compounds were characterized by elemental analysis, melting point, and Fourier transform IR and 1H and 13C{1H} NMR spectroscopies. X-ray crystallographic analyses of 3-6 show a bicyclic arrangement and a distorted trigonal-bipyramidal geometry for In in all cases. The two sulfur and one halogen (3 and 4) or three sulfur (5 and 6) atoms occupy equatorial positions, while the nitrogen atoms of the chelating (dimethylamino)ethanethiolate ligands occupy the axial positions. The metric parameters of the (Me2NCH2CH2S)2In framework were found to change minimally upon variation of the X/SR ligand, while the solubility of the corresponding compounds in organic solvents varied greatly. 1H NMR studies in D2O showed that 6 and 7 react slowly with an excess of the tripeptide l-glutathione and that the rate of reaction is affected by the pendant thiolate ligand -SR.     

The OsO4F-, OsO4F2(2)-, and OsO3F3- anions, their study by vibrational and NMR spectroscopy and density functional theory calculations, and the X-ray crystal structures of [N(CH3)4][OsO4F] and [N(CH3)4][OsO3F3

The fluoride ion acceptor properties of OsO4 and OsO3F2 were investigated. The salts [N(CH3)4][OsO4F] and [N(CH3)4]2[OsO4F2] were prepared by the reactions of OsO4 with stoichiometric amounts of [N(CH3)4][F] in CH3CN solvent. The salts [N(CH3)4][OsO3F3] and [NO][OsO3F3] were prepared by the reactions of OsO3F2 with a stoichiometric amount of [N(CH3)4][F] in CH3CN solvent and with excess NOF, respectively. The OsO4F- anion was fully structurally characterized in the solid state by vibrational spectroscopy and by a single-crystal X-ray diffraction study of [N(CH3)4][OsO4F]: Abm2, a = 7.017(1) A, b = 11.401(2) A, c = 10.925(2) A, V = 874.1(3) A3, Z = 4, and R = 0.0282 at -50 degrees C. The cis-OsO4F2(2-) anion was characterized in the solid state by vibrational spectroscopy, and previous claims regarding the cis-OsO4F2(2-) anion are shown to be erroneous. The fac-OsO3F3- anion was fully structurally characterized in CH3CN solution by 19F NMR spectroscopy and in the solid state by vibrational spectroscopy of its N(CH3)4+ and NO+ salts and by a single-crystal X-ray diffraction study of [N(CH3)4][OsO3F3]: C2/c, a = 16.347(4) A, b = 13.475(3) A, c = 11.436(3) A, beta = 134.128(4) degrees, V = 1808.1(7) A3, Z = 8, and R = 0.0614 at -117 degrees C. The geometrical parameters and vibrational frequencies of OsO4F-, cis-OsO4F2(2-), monomeric OsO3F2, and fac-OsO3F3- and the fluoride affinities of OsO4 and monomeric OsO3F2 were calculated using density functional theory methods.     

Vibrational study of (CH3)4NSbCl6 and [(CH3)4N]2SiF6

(CH3)4NSbCl6 and [(CH3)4N]2SiF6 are face-centred cubic compounds at ambient temperature with a = 11.548 and 11.172 A, respectively. The vibrational spectra of these two compounds are discussed in relation to their crystal structure and other compounds containing (CH3)4N+ ions. The assignment of the observed bands is discussed. The Raman and infrared spectra of [(CH3)4N]2SiF6 show that the cations and anions are not distorted inside the crystals and are weakly hydrogen-bonded to each other. The infrared spectrum of (CH3)4NSbCl6 confirms a cubic structure for this compound at ambient temperature, in which cations are in octahedral environments and can be interpreted as being disordered groups. No evidence could be found for the existence of hydrogen bonding between cations and anions in this compound. The phase transition of (CH3)4NSbCI6 is studied by means of Raman spectroscopy. It is believed to be governed by the reorientational motions of tetramethylammonium cations and may be classified as an 'order-disorder' type.     

Vibrational study of [(CH3)4N]2Cu0.5Zn0.5Cl4

[(CH3)4N]2Zn0.5Cu0.5Cl4 shows an orthorhombic system at ambient temperature with P2(1)nb space group. At room temperature, the crystal consists of three sublattices constituted by MCl4 (M=Cu and Zn) and two tetramethylammoniums N1(CH3)4 and N2(CH3)4, which give rise to a total of 372 vibrational modes that transform according to the four irreductible representations of the C2v point group in the following way: Gamma(vib)=93(A1+A2+B1+B2). The infrared and Raman spectra of polycrystalline samples have been investigated at room temperature. The assignment of the observed bands is discussed.     

Framework fluxionality of organometallic oxides: synthesis, crystal structure, EXAFS, and DFT studies on [[Ru(eta6-arene)]4Mo4O16] complexes

Reactions of the molybdates Na(2)MoO4.2 H2O and (nBu(4)N)2[Mo2O7] with [[Ru(arene)Cl(2)](2)] (arene=C(6)H5CH3, 1,3,5-C6H3(CH3)(3), 1,2,4,5-C6H2(CH3)4) in water or organic solvents led to formation of the triple-cubane organometallic oxides [[Ru(eta(6)-arene)](4)Mo4O16], whose crystal and molecular structures were determined. Refluxing triple cubane [[Ru(eta(6)-C6H5CH3)](4)Mo4O16] in methanol caused partial isomerization to the windmill form. The two isomers of [[Ru(eta(6)-C6H5CH3)](4)Mo4O16] were characterized by Raman and Mo K-edge X-ray absorption spectroscopy (XAS), both in the solid-state and in solution. This triple-cubane isomer was also used as a spectroscopic model to account for isomerization of the p-cymene windmill [[Ru(eta(6)-1,4-CH3C6H4CH(CH3)2)](4)Mo4O16] in solution. Using both Raman and XAS techniques, we were then able to determine the ratio between the windmill and triple-cubane isomers in dichloromethane and in chloroform. Density functional calculations on [[Ru(eta(6)-arene)](4)Mo4O16] (arene=C6H6, C6H5CH3, 1,3,5-C6H3(CH3)3, 1,4-CH3C6H4CH(CH3)2, C6(CH3)6) suggest that the windmill form is intrinsically more stable, provided the complexes are assumed to be isolated. Intramolecular electrostatic interactions and steric bulk induced by substituted arenes were found to modulate but not to reverse the energy difference between the isomers. The stability of the triple-cubane isomers should therefore be accounted for by effects of the surroundings that induce a shift in the energy balance between both forms.     

Reaction of the Mo3S4 cluster with dimethylacetylenedicarboxylate: an ESR-active cluster and an organometallic cluster formed by alpha,beta-conjugate addition

A seven-electron cluster [Mo3(mu3-S){mu3-SC(CO(2)CH(3))=C(CO(2)CH(3))S}{mu-SC(CO(2)CH(3))=CH(CO(2)CH(3))}(dtp)3(mu-OAc)] [2, S2P(OC(2)H(5))2-; dtp = diethyldithiophosphate] and an organometallic cluster [Mo3(mu3-S){mu3-SC(CO(2)CH(3))=C(CO(2)CH(3))S}{mu-SC(CO(2)CH(3))CH(OCH(3))(CO2)}(dtp)2(CH(3)OH)(mu-OAc)](Mo-C) (3) were obtained by reaction in methanol of the sulfur-bridged trinuclear complex [Mo3(mu3-S)(mu-S)3(dtp)3(CH(3)CN)(mu-OAc)] (1) with dimethylacetylenedicarboxylate (DMAD). The X-ray structures of 2 and 3 revealed the adduct formation of two DMAD molecules to the respective Mo(3)S(4) cores. 2 is paramagnetic and obeys the Curie-Weiss law: the mu(eff) value at 300 K is 1.90 muB. The electron spin resonance signal was observed at 173 K. The density functional theory calculation of 2 demonstrated that the main components of the singly occupied molecular orbitals of alpha and beta spins are Mo d electrons and the main components of lowest unoccupied molecular orbitals are of Mo and the olefin moiety with one C-S bond. A one-electron reversible oxidation process of 2 was observed at E1/2 = -0.11 V vs Fc/Fc+. The electronic spectrum of 2 has a peak at 468 nm (epsilon = 2170 M(-1) cm(-1)) and shoulders at 640 (918) and 797 (605) nm, and 3 has shoulders at 441 (1740) and 578 (625) nm and a distinct peak at 840 (467) nm. An intermediate [Mo3(mu3-S){mu3-SC(CO(2)CH(3))=C(CO(2)CH(3))S}{mu-SC(CO(2)CH(3))=CH(CO(2)CH(3))}(dtp)3(mu-OAc)]+ (4) is tentatively suggested: a one-electron reduction of 4 gives 2, and a nucleophilic conjugate addition of CH(3)O- to the alpha,beta-unsaturated carbonyl group of 4 gives 3.     

Photochemical reactions of [CH2(eta5-C5H4)2][Rh(C2H4)2]2 with silanes: evidence for Si-C and C-H activation pathways

Photochemical reaction of [CH2(eta5-C5H4)2][Rh(C2H4)2]2 1 with dmso led to the stepwise formation of [CH2(eta5-C5H4)2][Rh(C2H4)2][Rh(C2H4)(dmso)] 2a and [CH2(eta5-C5H4)2][Rh(C2H4)(dmso)]2 2b. Photolysis of 1 with vinyltrimethylsilane ultimately yields three isomeric products of [CH2(eta5-C5H4)2][Rh(CH2=CHSiMe3)2]2, 3a, 3b and 3c which are differentiated by the relative orientations of the vinylsilane. When this reaction is undertaken in d6-benzene, H/D exchange between the solvent and the alpha-proton of the vinylsilane is revealed. In addition evidence for two isomers of the solvent complex [CH2(eta5-C5H4)2][Rh(C2H4)2][Rh(C2H4)(eta2-toluene)] was obtained in these and related experiments when the photolysis was completed at low temperature without substrate, although no evidence for H/D exchange was observed. Photolysis of 1 with Et3SiH yielded the sequential substitution products [CH2(eta5-C5H4)2][Rh(C2H4)2][Rh(C2H4)(SiEt3)H] 4a, [CH2(eta5-C5H4)2][Rh(C2H4)(SiEt3)H]2 4b, [CH2(eta5-C5H4)2][Rh(C2H4)(SiEt3)H][Rh(SiEt3)2(H)2] 4c and [CH2(eta5-C5H4)2][Rh(SiEt3)2(H)2]2 4d; deuteration of the alpha-ring proton sites, and all the silyl protons, of 4d was demonstrated in d6-benzene. This reaction is further complicated by the formation of two Si-C bond activation products, [CH2(eta5-C5H4)2][RhH(mu-SiEt2)]2 5 and [CH2(eta5-C5H4)2][(RhEt)(RhH)(mu-SiEt2)2] 6. Complex 5 was also produced when 1 was photolysed with Et2SiH2. When the photochemical reactions with Et3SiH were repeated at low temperatures, two isomers of the unstable C-H activation products, the vinyl hydrides [CH2(eta5-C5H4)2][{Rh(SiEt3)H}{Rh(SiEt3)}(mu-eta1,eta2-CH=CH2)] 7a and 7b, were obtained. Thermally, 4c was shown to form the ring substituted silyl migration products [(eta5-C5H4)CH2(C5H3SiEt3)][Rh(SiEt3)2(H)2]2 8 while 4b formed [CH2(C5H3SiEt3)2][Rh(SiEt3)2(H)2]2 (9a and 9b) upon reaction with excess silane. The corresponding photochemical reaction with Me3SiH yielded the expected products [CH2(eta5-C5H4)2][Rh(C2H4)2][Rh(C2H4)(SiMe3)H] 10a, [CH2(eta5-C5H4)2][Rh(C2H4)(SiMe3)H]2 10b, [CH2(eta5-C5H4)2][Rh(C2H4)(SiMe3)H][Rh(SiMe3)2(H)2] 10c and [CH2(eta5-C5H4)2][Rh(SiMe3)2(H)2]2 10d. However, three Si-C bond activation products, [CH2(eta5-C5H4)2][(RhMe)(RhH)(mu-SiMe2)2] 11, [CH2(eta5-C5H4)2][(Rh{SiMe3})(RhMe)(mu-SiMe2)2] 12 and [CH2(eta5-C5H4)2][(Rh{SiMe3})(RhH)(mu-SiMe2)2] 13 were also obtained in these reactions.     

Investigations on the electronic effects of the peripheral 4'-group on 5-(4'-substituted)phenylazo-8-hydroxyquinoline ligands: zinc and aluminium complexes

A new series of 5-(4'-substituted)phenylazo-8-hydroxyquinolines (H[L-R]; R = N(CH(3))(2), C(2)H(5), n-C(4)H(9), C(CH(3))(3), H, and F, ) has been prepared and the corresponding Zn[L-R](2) (1a-6a) and Al[L-R](3) (1b-6b) complexes successfully synthesized. These compounds have been studied in order to design new molecular materials with enhanced electron transport properties. The obtained species have been extensively characterized by absorption and emission spectra and by cyclic voltammetric measurements. Experimental and computational results show that the Zn[L-N(CH(3))(2)].2H(2)O (1a) and Al[L-N(CH(3))(2)](1b) complexes only feature luminescence (at 620 and 600 nm), respectively. The unique effects, which are induced by the N=N-C(6)H(4)-N(CH(3))(2) group, are further proved by a reversible electron transfer process detected by cyclic voltammetry. These outcomes, discussed on the basis of theoretical calculations performed on the (H[L-N(CH3)2])-, H[L-N(CH3)2] and (H[L-N(CH3)(2)])+ species, suggest that metal complexes formed by 5-(4'-N,N-dimethylamino)phenylazo-8-hydroxyquinoline should be considered as electron transport materials suitable for applications in photonic devices.     

Identification and chemistry of C4H3 and C4H5 isomers in fuel-rich flames

Quantitative identification of isomers of hydrocarbon radicals in flames is critical to understanding soot formation. Isomers of C4H3 and C4H5 in flames fueled by allene, propyne, cyclopentene, or benzene are identified by comparison of the observed photoionization efficiencies with theoretical simulations based on calculated ionization energies and Franck-Condon factors. The experiments combine molecular-beam mass spectrometry (MBMS) with photoionization by tunable vacuum-ultraviolet synchrotron radiation. The theoretical simulations employ the rovibrational properties obtained with B3LYP/6-311++G(d,p) density functional theory and electronic energies obtained from QCISD(T) ab initio calculations extrapolated to the complete basis set limit. For C4H3, the comparisons reveal the presence of the resonantly stabilized CH2CCCH isomer (i-C4H3). For C4H5, contributions from the CH2CHCCH2 (i-C4H5) and some combination of the CH3CCCH2 and CH3CHCCH isomers are evident. Quantitative concentration estimates for these species are made for allene, cyclopentene, and benzene flames. Because of low Franck-Condon factors, sensitivity to n-isomers of both C4H3 and C4H5 is limited. Adiabatic ionization energies, as obtained from fits of the theoretical predictions to the experimental photoionization efficiency curves, are within the error bars of the QCISD(T) calculations. For i-C4H3 and i-C4H5, these fitted adiabatic ionization energies are (8.06 +/- 0.05) eV and (7.60 +/- 0.05) eV, respectively. The good agreement between the fitted and theoretical ionization thresholds suggests that the corresponding theoretically predicted radical heats of formation (119.1, 76.3, 78.7, and 79.1 kcal/mol at 0 K for i-C4H3, i-C4H5, CH3CCCH2, and CH3CHCCH, respectively) are also quite accurate.     

The unexpected desulfurization of 4-aminothiophenols

Thermolysis of 4-aminophenyl benzyl sulfide at 523 K in the hydrogen donor solvent (HDS), 9,10-dihydroanthracene (AnH2), gave 4-aminothiophenol and toluene as the predominant products of the homolytic S-C bond cleavage. Under these conditions, a portion of the 4-aminothiophenol was desulfurized to aniline with first-order kinetics and with a rate constant estimated by kinetic modeling to be 7.0x10(-6) s-1. Starting with 4-NH2C6H4SH at 523 K, it was found that sulfur loss was more efficient in the non-HDSs, anthracene and hexadecane, than in AnH2. Under similar (competitive) reaction conditions, YC6H4SHs with Y=H, 4-CN, and 3-CF3 were completely inert; with Y=4-CH3O, there was some very minor desulfurization, whereas with Y=4-N(CH3)2 and 4-N(CH3)(H), the sulfur extrusions were as fast as that for Y=4-NH2. We tentatively suggest that this apparently novel reaction is a chain process initiated by the bimolecular formation of diatomic sulfur, S2, followed by a reversible addition of ground state, triplet 3S2 to the thiol sulfur atom, 4-NH2C6H4S upward arrow(SS upward arrow)H, and insertion into the S-H bond, 4-NH2C6H4SSSH. In a cascade of reactions, aniline and S8 are formed with the chains being terminated by reaction of 4-NH2C6H4S upward arrow(SS upward arrow)H with 4-NH2C6H4SH. Such a reaction mechanism is consistent with the first-order kinetics. That this reaction is primarily observed with 4-YC6H4SH having Y=N(CH3)2, N(CH3)(H), and NH2 is attributed to the fact that these compounds can exist as zwitterions.