Sorption of cobalt by two Mexican clinoptilolite rich tuffs zeolitic rocks and kaolinite

Summary The sorption of cobalt from aqueous solutions was studied for two Mexican clinoptilolite rich tuffs zeolitic rocks and kaolinite clay. The effects of pH and contact time on the sorption were examined. Cobalt was determined by neutron activation analysis of the exchanged aluminosilicates. The sorption of cobalt by the aluminosilicates was similar in the pH range from 4 to 7. Kinetic studies showed a rapid sorption in the first 5 hours and equilibrium in about 24 hours. Sorption kinetics was best described by the second-order Ritchie modified model. The experimental results obtained at different concentrations and room temperature for both zeolites were fitted to Freundlich, Langmuir and Freundlich-Langmuir isotherms. The sorption pattern was found to follow the Freundlich model.     

Preparation of organomodified aluminosilicates for purification of biological solutions

Organomodified aluminosilicates for purification of biological solutions were prepared from a natural zeolite. The synthesis was performed by chemical deposition of chitosan on the zeolite surface followed by successive treatment with a solution of copper sulfate and a solution of potassium ferricyanide. The composition of sorbents was determined by elemental analysis. The physicochemical properties of the starting and modified zeolites were studied by the positron annihilation spectroscopy, IR spectroscopy, powder X-ray diffraction, and scanning electron microscopy, while the adsorption properties were examined by sorption of brilliant green. The adsorption behavior of the zeolites toward endotoxins was assessed. The sorbent containing the ferricyanide-chitosan complex was found to have the highest sorption capacity for lipopolyssacharides (endotoxins).     

Properties of diclofenac sodium sorption onto natural zeolite modified with cetylpyridinium chloride

In this study an investigation of a model drug sorption onto cationic surfactant-modified natural zeolites as a drug formulation excipient was performed. Natural zeolite was modified with cetylpyridinium chloride in amounts equivalent to 100, 200 and 300% of its external cation-exchange capacity. The starting material and obtained organozeolites were characterized by Fourier transform infrared spectroscopy, zeta potential measurements and thermal analysis. In vitro sorption of diclofenac sodium as a model drug was studied for all surfactant/zeolite composites by means of sorption isotherm measurements in aqueous solutions (pH 7.4). The modified zeolites with three levels of surfactant coverage within the short activation time were prepared. Zeta potential measurements and thermal analysis showed that when the surfactant loading level was equal to external cation-exchange value, almost monolayer of organic phase were present at the zeolitic surface while higher amounts of surfactant produced less extended bilayers, ordered bilayers or admicelles at the zeolitic surface. Modified zeolites, obtained in this manner, were effective in diclofenac sodium sorption and the organic phase derived from adsorbed cetylpyridinium chloride was the primary sorption phase for the model drug. The Langmuir isotherm was found to describe the equilibrium sorption data well over the entire concentration range. The separate contributions of the adsorption and partition to the total sorption of DS were analyzed mathematically. Results revealed that that adsorption and partitioning of the model drug take place simultaneously.     

Sorption of Cadmium from Aqueous Solutions at Different Temperatures by Mexican HEU-type Zeolite Rich Tuff

Many factors may affect the heavy metals sorption on natural zeolites among them the temperature, for this reason in this paper the cadmium retention behavior on Mexican zeolitic rich tuff as a function of temperature is considered. The kinetic and the isotherms were determined at 303, 318, and 333 K, the remaining cadmium in the solution samples was analyzed by atomic absorption spectrometry. The pseudo-second order rate constant, k, as well as the apparent diffusion coefficients were calculated from the cadmium uptake by the zeolitic rock as a function of the contact time and temperature, the highest amounts were found for the experiments done at 333 K. The maximum cadmium adsorption capacity by the zeolitic material was 12.2 mg Cd²⁺/g at 318 K corresponding to 20% of the effective ion exchange capacity of the Chihuahua zeolitic rock. In order to explain the cadmium sorption behavior different kinetics and isotherm models were considered.     

Arsenic sorption by modified clinoptilolite–heulandite rich tuffs

Recent works show that modified natural zeolites improve the remotion of anionic or non-polar organic pollutants from water. In this work the arsenic sorption from aqueous solutions onto clinoptilolite–heulandite rich tuffs modified with lanthanum, hexadecyltrimethylammonium or iron was investigated considering the arsenic chemical species and the pH of the arsenic solutions. Clinoptilolite–heulandite rich tuffs were characterized by scanning electron microscopy and X-ray diffraction analysis. The elemental composition of the zeolitic samples was also determined. According to the Langmuir isotherm model the arsenic (V) sorption capacity of the zeolites was 75.4 μg As/g at pH 3, 3.9 μg As/g at pH 5 and 53.6 μg As/g at pH 6, for the lanthanum, HDTMA and iron modified clinoptilolite–heulandite rich tuff from Chihuahua (México), respectively. In general, the results suggested that the arsenic retention depends on the precedence of zeolitic material, the nature of arsenic chemical species, pH as well as the characteristics of modified natural zeolites. In this work the arsenic adsorption mechanisms are also discussed.     

Ion exchange of radium and barium in zeolites

The sorption of radium, barium and mixture of both elements has been studied in the zeolites 3A, 5A and Y. The ratio zeolite; solution was 100 mg: 10 cm³ and the pH was 3. Carrier-free radium was completely retained in all studied zeolites. When 0.0016 meq of barium/cm³ were added, the sorption of radium decreased in the zeolite 5A only and when 0.014 meq of barium/cm³, the radium sorption was reduced in all the studied zeolites. The sorption of barium was similar to that of radium. The amounts of sodium and calcium removed from the zeolites and the proton quantity fixed to them allowed us propose the ion exchange mechaniosm. The changes and ionic radii of the species exchanged did not play an important role. However, the location of the ions in the crystalline network of each zeolite is probably an important parameter for the exchange.     

Interaction of the zeolitic tuff with Zn-containing simulated pollutant solutions

The possibility of removing Zn2+ cations from wastewater by ion exchange using natural zeolites as exchangers has been investigated. The process of binding of zinc ions into zeolite structure has been established by several reaction mechanisms as a fast chemical reaction of ion exchange, accompanied by slower adsorption of different ionic species and possible precipitation or coprecipitation with the zeolite structure. The physicochemical phenomena such as hydrolysis and dissolution of surface layers are the result of interaction of zeolite with hydrogen or hydroxyl ions from the solution. Complexation of OH- with Zn2+ to form the zinc-hydroxy species strongly depends on pH value and affect the uptake mechanism as to lower dissolution of surface aluminosilicate layers. Structure imperfections as a surface property of mineralogical nonhomogeneous zeolitic grains can lead to formation of sorption surface sites with different energy, which affects the nonuniform distribution of different zinc species adsorbed. It is particularly possible in zeolitic tuff samples with relatively high content of aluminosilicates as minor mineralogical components, which is characteristic of Croatian deposits.     

Superior Ion‐exchange Property of Amorphous Aluminosilicates Prepared by a Co‐precipitation Method

The development of inexpensive inorganic ion‐exchangers for the purification of environmental pollutants is a social demand. Amorphous aluminosilicates with a relatively high homogeneous Al environment are prepared by a feasible co‐precipitation method, i. e., mixing an acidic aluminum sulfate solution and basic sodium silicate solution, which exhibit excellent ion‐exchange selectivity for Cs⁺ and Sr²⁺. The K_d value for Sr²⁺ was comparable with that of zeolite 4A. The local structures and ion‐exchange behavior of the amorphous aluminosilicates are systematically investigated. The ion‐exchange property of the amorphous aluminosilicates can be tuned by changing the interaction between the exchangeable cation and the amorphous aluminosilicates. Also, the amorphous aluminosilicates can adsorb bulky cations that zeolites hardly adsorb due to the limitation of the miropore size of zeolites.     

Tailor and Control of Acidic Strength in Ordered Mesoporous Aluminosilicates by Using Preformed Zeolite Precursors

The acidic strength of ordered mesoporous aluminosilicates of MAS-2, MAS-3, MAS-7 and MAS-9 and microporous crystals of Y, L, beta, and ZSM-5 zeolites was systemically investigated by temperature-programmed desorption of ammonia (NH3-TPD). Due to the use of preformed zeolite precursors of Y, L, beta and ZSM-5, the ordered mesoporous aluminosilicates with distinguished acidic strength were obtained, being dependent on the type of preformed zeolite precursors. Therefore, the acidic strength of these mesoporous aluminosilicates could be tailored and controlled.     

Ultrasonication-assisted sorption of cadmium from aqueous phase by wheat bran

In the present study, the sorption of cadmium from aqueous phase by wheat bran was investigated with and without the assistance of ultrasound. Kinetic data and sorption equilibrium isotherms were carried out in batch conditions. The influence of different operating parameters such as ultrasonic power, cadmium initial concentration, sorbent mass, temperature, and the combination of ultrasound and mechanical stirring on the kinetics of cadmium removal was studied. The obtained results show that the ultrasonic irradiation significantly enhances and improves the efficiency of the removal of cadmium, especially in the combined method. The sorption kinetic data were found to be well-represented by the pseudo-second-order rate equation, both in the absence and presence of ultrasound as well as in the combined process (stirring and ultrasonication). Ultrasonic power played a key role in the removal of cadmium. Equilibrium isotherm results could be well described by the Langmuir model both with and without the assistance of ultrasound. The effect of temperature on the sorption isotherms of cadmium in the absence and presence of ultrasound has been also studied and the thermodynamic parameters DeltaG degrees, DeltaH degrees, and DeltaS degrees were determined. The monolayer sorption capacities were 51.81, 35.09, and 22.78 mg g(-1) for experiments conducted by the combined process, in the presence of ultrasound, and in passive conditions, respectively. The combination ultrasound-stirring for the sorption process was shown to be of interest for the treatment of wastewaters contaminated with cadmium.     

Infrared spectroscopy study of the sorption of selenium(IV) on natural zeolites

The sorption of selenium(IV) ions on single crystals of natural shabazite, analcime, mesolite, stilbite, and on clinoptilolite- and mordenite-containing tuffs in dependence on the concentration and pH of a solution of sodium selenite was studied by infrared spectroscopy. It was assumed that sorption on clinoptilolite and mordenite tuffs from a 0.1 M solution of sodium selenite with pH 9 occurs in the form of selenite and pyroselenite anions forming a hydrogen bond with the zeolite water molecules. It was established that water molecules in analcime, unlike stilbite, shabazite and mesolite, also form hydrogen bonds with the selenite ion in an alkaline medium. No hydrogen bonds are formed in diluted solutions or an acid medium. The partial desilylation and dealumination of zeolites in alkaline and acid media respectively, were observed.     

由沸石纳米粒子自组装制备具有高催化活性中心和水热稳定的新型介孔分子筛材料

 人们合成了一系列介孔分子筛材料，并发现它们在催化、吸附与分离以及化学组装制备先进材料和分子器件等方面具有很大的潜在应用价值．但是，介孔分子筛材料相对于微孔沸石分子筛存在着两个致命弱点：较低的水热稳定性和较不活泼的催化活性中心．这两个弱点大大地影响了介孔分子筛在催化反应中的广泛应用．本文系统地综述了最近几年利用沸石纳米粒子自组装制备具有高催化活性中心和水热稳定的介孔分子筛材料的研究进展．这包括利用硅铝沸石纳米粒子自组装制备具有强酸性和水热稳定的新型介孔硅铝分子筛材料，利用钛硅沸石纳米粒子自组装制备具有高催化氧化活性中心和水热稳定的新型钛硅介孔分子筛材料，以及利用含有不同杂原子的沸石纳米粒子自组装制备一系列水热稳定的新型介孔分子筛催化材料．     

Adsorption of methylene blue and orange II onto unmodified and surfactant-modified zeolite

Adsorption of cationic methylene blue and anionic orange II onto unmodified and surfactant-modified zeolites was studied using a batch equilibration method. The effects of equilibrium time, solution pH, and sorption temperature were examined. The results suggested that 2% sodium dodecyl benzenesulfonate (SDBS)- and 3% sodium dodecyl sulfate (SDS)-modified zeolites had higher adsorption capacities for methylene blue than the unmodified zeolite, while 2% cetylpyridinium bromide hexadecyl (CPB)- and 2% hexadecylammonium bromide (HDTMA)-modified zeolites were the best adsorbents for orange II. The adsorption conditions were optimized, and the mechanisms of adsorption are briefly discussed.     

Application of a dispersive micro‐solid‐phase extraction method for pre‐concentration and ultra‐trace determination of cadmium ions in water and biological samples

A method for the trace determination of cadmium ions in water, human urine and human blood serum samples using ultrasonic‐assisted dispersive micro‐solid‐phase extraction (UA‐D‐μSPE) was developed. Silica‐coated magnetic nanoparticles were coated with polythiophene, and the resulting sorbent was characterized using thermogravimetry, differential thermal analysis, scanning electron microscopy, Fourier transform infrared spectrometry and X‐ray diffraction. Following UA‐D‐μSPE, cadmium ions were quantified using graphite furnace atomic absorption spectrometry. A Box–Behnken design was used for optimization of important sorption and desorption parameters in UA‐D‐μSPE: in the sorption step, pH of solution, sorption amount and sonication time for sorption; in the desorption step, concentration of eluent, volume of eluent and sonication time. The optimum conditions for the method were: pH of solution, 7.5; sonication time for sorption, 3 min; sorption amount, 35 mg; type and concentration of eluent, HCl and 1.1 mol l^?1; volume of eluent, 360 μl; sonication time for desorption, 110 s. Under the optimized conditions the limit of detection and relative standard deviation for the detection of cadmium ions by UA‐D‐μSPE were found to be 0.8 ng l^?1 and <6%, respectively.     

Specific features of the absorption of divalent manganese ions from aqueous solutions by zeolites

Sorption properties of natural zeolites from various Russia’s deposits for the Mn²⁺ ion were studied in comparison with various industrial adsorbents and some minerals. It was demonstrated that the equilibrium sorption capacity of these materials can be raised by their Na⁺-modification. The natural zeolites are advantageous at low Mn²⁺ ion concentrations over synthetic cation exchangers and activated carbons. The sorption capacity of the natural zeolites grows with increasing temperature.     

Cadmium sorption properties of poly(vinyl alcohol)/hydroxyapatite cryogels: I. kinetic and isotherm studies

A new adsorbent for removing heavy metal ions from wastewater, poly(vinyl alcohol)/hydroxyapatite(PVA/HAp) composite cryogel, has been investigated. The PVA/HAp cryogel was prepared through a clean process by using water and freeze-thawing. The PVA/HAp cryogel is provided with interconnected macropores varying from 0.1 um to several um and well dispersed and immobilized HAp in cryogel. Batch experiments of cadmium sorption were carried out to test the sorption ability of PVA/HAp cryogel. The isotherm and kinetics of cadmium sorption were studied by fitting the experimental results to isotherm and kinetics models. The Langmuir isotherm suitable for this system shows the maximum sorption capacity of 53.3 mg/g. For kinetics, the double-exponential model presents best fit compared with pseudo-first-order and pseudo-second-order models. The double-exponential model indicates a diffusion-controlled and a two-step mechanism.     

Comparison of the sorption properties of natural and synthetic zeolites for the purification of aqueous solutions from cobalt: sorption of the cobalt from aqueous solutions in dynamic conditions and the quantitative determination of cobalt by the PIXE method

A methodology of quantitative determination of cobalt using the PIXE method has been developed. The method is based on the use of instant nuclear-physical analysis with the inducement of a target by a 1.6 MeV proton beam and the recording of the characteristic X-ray emission of the K-series of the cobalt. The linear relationship between the quantitative content of cobalt strontium and its X-ray emission K-shell was obtained. The sorption of cobalt by natural and synthetic zeolites from aqueous solutions in dynamic conditions has been studied. Sorption of cobalt with clinoptilolite after 80 cycles of sorption was about 60%. Sorption of cobalt after 80 cycles of sorption by zeolites NaX and NaA was 86 and 70%. Consideration was given to the influence of competing ions (sodium) on the sorption of cobalt by zeolites. The introduction of competing ions leads to a decrease in sorption of the cobalt by 25–60%, depending on the content of competing ions.     

Shape Selectivity in Enol Thioether Synthesis Catalyzed by Zeolites

The competitive reaction catalyzed by solid acid catalyst between two cyclohexanones (1a) and (1b) with thiophenol (2) has been studied. No selectivity was observed with the lamellar montmorillonite in contrast with microporous aluminosilicates (zeolites) where shape selectivity was observed, in particularly when the zeolites were saturated by thiophenol (2) before a competitive reaction.     

Green chemical conversion of large-scale aluminosilicates into zeolites for environmental remediation under carbon-neutral pressure

This minireview summarized the recent progress of converting the typical classes of large-scale aluminosilicates into zeolite materials for environmental remediation. The representative zeolite structures that can be directly converted from large-scale aluminosilicates via green chemistry approaches are addressed. The environmental remediation mechanisms on employing these zeolites for environmental remediation have been recapped. The present research gap and future research perspectives under carbon-neutral pressure via green chemistry principle on this topic are also discussed.