Thermodynamics of sorption of KNO3 by a crown-containing polymer

The equilibrium of sorption of KNO₃ from aqueous solutions by a granular polymer containing immobilized dibenzo-18-crown-6 was studied. The thermodynamic characteristics for sorption of an electrolyte by a crown-containing polymer were determined. It was shown that the adsorption sites are energetically equivalent in the range of compositions studied. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya. No. 7, pp. 1350–1352, July, 1998.     

Sorption of alkali metals and silver nitrates from binary and multicomponent solutions by a crown-containing polymer

The equilibrium in the systems containing a polymer based on dibenzo-18-crown-6 and binary or multicomponent aqueous solutions of NaNO₃, KNO₃, RbNO₃, and AgNO₃ was studied. The constants of the sorption of the individual electrolytes from solution into the polymer were determined. Preliminary calculations of the phase composition on sorption of 11 mixtures of electrolytes with a common anion from the data on the equilibria in the systems with one electrolyte are possible.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 464–466, March, 1993.     

SWELLING DYNAMICS OF A TERNARY INTERPENETRATING POLYMER NETWORK (IPN) AND CONTROLLED RELEASE OF POTASSIUM NITRATE AS A MODEL AGROCHEMICAL

ABSTRACT

An interpenetrating polymer network (IPN) of carboxymethyl cellulose (CMC), polyethylene glycol (PEG) and crosslinked polyacrylamide (PAM) has been prepared and dynamic water sorption properties have been investigated as a function of chemical architecture of the IPN, pH and temperature of the swelling medium and presence of salt ions in the bathing medium. Based on the Fick's law the swelling exponent (n) and diffusion constant (D) were evaluated suggesting possible modes of water transport through the IPN's. The IPN's synthesized were loaded with KNO₃ as a representative agrochemical and its release dynamics was studied conductometrically. The influences of percent loading and chemical composition of the IPN were also observed on the release rate and released amounts of KNO₃.     

Sorption of uranium(VI) onto strontium titanate in KNO<Subscript>3</Subscript> medium

The sorption of uranium(VI) on the perovskite structure of strontium titanate in a 0.5M KNO₃ solution is studied. SrTiO₃ commercial material was characterized by XRD showing a tausonite face, with a specific area of 2.42 m^2.g⁻¹. The electrical surface characterization of the compound was performed by mass and potentiometric titrations. pH_pzc in water was 8.5±0.3 and 9.1±0.2 in 0.5M KNO₃ solution, showing a positively charged surface. FITEQL 4.0 program was used to calculate the sorption curves and the surface acidity constants by the constant capacitance model obtaining: log K ₁ = 8.67 and log K ₂ = −9.43. The sorption edge was fitted with two different uranium(VI) species sorbed, corresponding to bidentate complexes of UO₂²⁺ and UO₂(OH)₂H₂O on the surface of strontium titanate.     

Sorption of rubidium chloride by crown-containing polymer

The kinetics and mechanism of the sorption of rubidium chloride from ethanol by granulated polymer containing immobilized dibenzo-18-crown-6 are studied. The sorption of RbCl is controlled by internal diffusion accompanied by complex formation in the polymer. The equilibrium constants of the sorption and diffusion coefficients of the electrolyte in the sorbent are calculated.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1025–1028, June, 1995.     

Oxygen Transport in the SOFC Cathode

The impedance of the La_0.75Sr_0.2MnO₃-cathode/electrolyte interface for cathodes with different porosity is measured. The impedance spectra are fitted using a developed model of the oxygen transport at this interface. After the measurements, the cathode is removed from the electrolyte. The contact area and the three-phase boundary length (TPBL) at the interface are estimated from SEM images of the electrolyte surface. The dependence of the interfacial electrical resistance on the microstructure is discussed. It is shown that the bulk diffusion of oxygen vacancies at the interface at 950°C is high enough to use the whole La_0.75Sr_0.2MnO₃/YSZ contact area F for the oxygen transport into the electrolyte for microstructures with 2F/TPBL 2 m. The impact of the surface diffusion of oxygen species on polarization resistance at operation temperatures <900°C is discussed. The polarization resistance and the morphology of composite cathodes made from La_0.75Sr_0.2MnO₃/YSZ and yttria- or scandia-stabilized zirconia powders (3YSZ, 8YSZ, 10ScSZ) are investigated by impedance spectroscopy at 800–950°C. The polarization (interfacial) resistance decreases gradually with addition of electrolyte powder in the uLSM cathode material independent of the electrolyte powder used. The interfacial resistance of the uLSM/3YSZ, uLSM/8YSZ, and uLSM/10ScSZ composite cathodes is almost the same. The interaction between uLSM and doped zirconia particles is discussed on the basis of the interfacial resistance, activation energies, and high-frequency impedance.     

热力学模型研究KNO3-K2SO4-H2O和KNO3-KCl-H2O体系溶解度

用Pitzer-Simonson-Clegg热力学模型(PSC模型),分别拟合KCl-H2O、K2SO4-H2O、KNO3-H2O体系以及KNO3-K2SO4-H2O和KNO3-KCl-H2O体系水活度和溶解度实验数据,得到二元参数和三元离子相互作用参数,并以此计算3个二元盐水体系溶解度相图,及2个三元盐水体系在不同温度下的溶解度,结果表明计算值与实验值一致。     

Re-evaluation of the thermodynamic activity quantities in aqueous alkali metal nitrate solutions at T = 298.15 K

The Hückel equation used in this study to correlate the experimental activities of dilute alkali metal nitrate solutions up to a molality of about 1.5 mol · kg⁻¹ contains two parameters being dependent on the electrolyte: B [that is related closely to the ion-size parameter (a∗) in the Debye–Hückel equation] and b₁ (this parameter is the coefficient of the linear term with respect to the molality and this coefficient is related to hydration numbers of the ions of the electrolyte). In more concentrated solutions up to a molality of 7 mol · kg⁻¹, an extended Hückel equation was used, and it contains additionally a quadratic term with respect to the molality and the coefficient of this term is parameter b₂. All parameter values for the Hückel equations of LiNO₃, NaNO₃, and KNO₃ were determined from the isopiestic data measured by Robinson for solutions of these salts against KCl solutions [J. Am. Chem. Soc. 57 (1935) 1165]. In these estimations, the Hückel parameters determined recently for KCl solutions [J. Chem. Eng. Data 54 (2009) 208] were used. The Hückel parameters for RbNO₃ and CsNO₃ were determined from the reported osmotic coefficients of Robinson [J. Am. Chem. Soc. 59 (1937) 84]. The resulting parameter values were tested with the vapour pressure and isopiestic data existing in the literature for alkali metal nitrate solutions. These data support well the recommended Hückel parameters up to a molality of 7.0 mol · kg⁻¹ for LiNO₃ and NaNO₃, up to 4.5 mol · kg⁻¹ for RbNO₃, up to 3.5 mol · kg⁻¹ for KNO₃, and up to 1.4 mol · kg⁻¹ for CsNO₃ solutions. Reliable activity and osmotic coefficients of alkali metal nitrate solutions can, therefore, be calculated by using the new Hückel equations, and they have been tabulated at rounded molalities. The activity and osmotic coefficients obtained from these equations were compared to the values suggested by Robinson and Stokes [Electrolyte Solutions, second ed., Butterworths Scientific Publications, London, 1959], to those calculated by using the Pitzer equations with the parameter values of Pitzer and Mayorga [J. Phys. Chem. 77 (1973) 2300], and to those calculated by using the extended Hückel equation of Hamer and Wu [J. Phys. Chem. Ref. Data 1 (1972) 1047].     

Toluene diffusion in butyl rubber

The sorption isotherm and the polymer mass-fixed diffusion coefficients, D, for toluene in butyl rubber have been measured by the incremental sorption method to concentrations of 130%, corresponding to a solvent volume fraction of 0.578. The increase in D with concentration is strongly exponential to a concentration of 30% and then begins to level out. Since the nature of the dimensional change occurring in vapor sorption was not known, the values of D were converted to solvent self-diffusion coefficients, D₁, assuming both swelling in the thickness direction (1D) and isotropically (3D). The free volume (FV) theory of Fujita was fitted to the resulting D₁ with the zero concentration diffusion coefficient and the self-diffusion coefficient of toluene as limiting values leaving only a single arbitrary parameter. In this form the FV theory was able to describe the trend of the experimental D₁ for the 1D and 3D cases equally well. Values of D were back-calculated from the FV relations for the 1D and 3D cases for comparison with the experimental results and with the diffusion coefficient determined by immersion in toluene. These comparisons favor the assumption that swelling is isotropic. It appears that the simple free volume relation is capable of providing a satisfactory representation of the experimental data with only a single fitting parameter, although there are moderate quantitative discrepancies. © 1994 John Wiley & Sons, Inc.     

Diagrammes de phases des systemes binaires KNO3-CsNO3 et KNO3-NaNO3

(K?Na)NO₃ and (K?Cs)NO₃ phase diagrams were drawn using a simultaneous thermal analysis technique in the range 373 to 623 K. The first phase diagram shows a minimum freezing equimolar mixture at 494 K, a continuous solid solution in equilibrum with liquid phase and an eutectic mixture (88 molar % of KNO₃) at 380 K. The second one exhibits an invariant at 400 K corresponding to the KNO₃ solid-solid transition, an eutectoid mixture at 10 molar % of KNO₃ and 418 K involving the CsNO₃ solid-solid transition and an eutectic mixture at 60 molar % of KNO₃ and 495 K.     

Quasi-solid-state dye-sensitized solar cell based on a polymer gel electrolyte with in situ synthesized ionic conductors

A polymer gel electrolyte with in situ synthesized Acac-Py-I₂ ionic conductors was prepared for fabricating a quasi-solid-state dye-sensitized solar cell (QS-DSSC). The in situ synthesized Acac-Py-I₂ ionic conductors show weaker influence on the liquid electrolyte absorbency of the polymer gel electrolyte than that of Acac-Py-I₂ ionic conductors dissolved in liquid electrolyte. Owing to the higher liquid electrolyte absorbency, the polymer gel electrolyte with in situ synthesized Acac-Py-I₂ ionic conductors shows higher ionic conductivity than that of polymer gel electrolyte with Acac-Py-I₂ ionic conductors absorbed from liquid electrolyte. QS-DSSC containing the polymer gel electrolyte with in situ synthesized Acac-Py-I₂ ionic conductors shows 3.815% energy conversion efficiency, which is 21.6% higher than that of QS-DSSC containing polymer gel electrolyte with Acac-Py-I₂ ionic conductors absorbed from liquid electrolyte.     

Sorption ability of chemically treated clinoptilolites with regard to cobalt and cesium

Clinoptilolites were treated by NaOH, NH₄NO₃, NaNO₃, KNO₃ and HCl solutions. The sorption ability has been measured by a radiochemical technique. The sorption coefficients were calculated for Co and Cs.     

傅立叶变换红外光谱技术在超临界CO2作用聚合物体系中的应用

超临界CO₂（scCO₂）作为一种物理化学性质优良、具有高扩散速率及优良溶解性能的溶剂,在科学研究及工业生产中广受青睐。将scCO₂应用于聚合物体系中,CO₂ 与聚合物间特殊的相互作用有利于CO₂分子在聚合物中的吸附与扩散。同时通过CO₂的吸附及其对聚合物的溶胀和塑化作用,聚合物所处微观化学环境以及整体结构性质会发生一定的变化。由于傅立叶变换红外光谱（FTIR）技术能够有效地考察化学环境变化对分子结构造成的影响,这一表征技术在超临界CO₂作用体系中广为应用。本文主要选取了近年来利用FTIR技术考察scCO₂作用于聚合物体系的一些实例,从CO₂-聚合物相互作用机理,scCO₂对聚合物或生物大分子的加工过程的影响两方面,阐述了利用红外光谱技术在scCO₂作用体系中的应用以及前景。     

Effect of nanoscale CeO<Subscript>2</Subscript> on PVDF-HFP-based nanocomposite porous polymer electrolytes for Li-ion batteries

New poly (vinylidenefluoride-co-hexafluoro propylene) (PVDF-HFP)/CeO₂-based microcomposite porous polymer membranes (MCPPM) and nanocomposite porous polymer membranes (NCPPM) were prepared by phase inversion technique using N-methyl 2-pyrrolidone (NMP) as a solvent and deionized water as a nonsolvent. Phase inversion occurred on the MCPPM/NCPPM when it is treated by deionized water (nonsolvent). Microcomposite porous polymer electrolytes (MCPPE) and nanocomposite porous polymer electrolytes (NCPPE) were obtained from their composite porous polymer membranes when immersed in 1.0 M LiClO₄ in a mixture of ethylene carbonate/dimethyl carbonate (EC/DMC) (v/v = 1:1) electrolyte solution. The structure and porous morphology of both composite porous polymer membranes was examined by scanning electron microscope (SEM) analysis. Thermal behavior of both MCPPM/NCPPM was investigated from DSC analysis. Optimized filler (8 wt% CeO₂) added to the NCPPM increases the porosity (72%) than MCPPM (59%). The results showed that the NCPPE has high electrolyte solution uptake (150%) and maximum ionic conductivity value of 2.47 × 10⁻³ S cm⁻¹ at room temperature. The NCPPE (8 wt% CeO₂) between the lithium metal electrodes were found to have low interfacial resistance (760 Ω cm²) and wide electrochemical stability up to 4.7 V (vs Li/Li⁺) investigated by impedance spectra and linear sweep voltammetry (LSV), respectively. A prototype battery, which consists of NCPPE between the graphite anode and LiCoO₂ cathode, proves good cycling performance at a discharge rate of C/2 for Li-ion polymer batteries.     

Diffusion of water in solutions of alkali metal bromides,tetraalkylammonium bromides and ammonium bromide

The diffusion coefficient of water D _w in aqueous solutions of the alkali metal bromides, tetraalkylammonium bromides (methyl, ethyl, n-propyl, and n-butyl) and ammonium bromide at 25°C is reported for concentrations up to 2 mol-dm^–3. In addition, values for D _w in 2 mol-dm^–3 solutions of CsBr, KBr, NaBr, LiBr, and fully deuterated methanol, acetonitrile, and acetone have been measured for temperatures in the range 5 to 50°C. The concentration dependence of the relative water diffusion coefficient D _w /D _o , where D _o is the self-diffusion coefficient of water, has been analyzed in terms of an equation analogous to the Jones-Dole equation for relative viscosity. The B-coefficient for diffusion is well correlated with the viscosity B-coefficient. For the structure-breaking electrolytes CsBr and KBr, D _w /D _o decreases rapidly with increasing temperature, whereas for the structure-makers NaBr and LiBr, the temperature dependence of D _w /D _o has the same sign but is much smaller in magnitude. For the nonelectrolyte solutions, the structure-making effect decreases with increasing temperature and the temperature coefficient of D _w /D _o is positive. It is apparent that, when diffusion of the solvent is being considered, the temperature must be taken into account in the classification of an electrolyte as a structure-breaker or structure-maker.     

Effects of carbon filler on sorption and diffusion of gases through rubbery materials

Effects of carbon filler on the sorption and diffusion of carbon dioxide in natural rubber and in styrene-butadiene rubber have been studied. Sorption isotherms conform to Henry's law in unfilled rubber and to Langmuir's law in carbon black. The isotherms in filled rubber exhibit a combination of the two sorption modes. The Henry's law solubility parameter k_D increases with carbon filler content; the Langmuir saturation constant C′_A initially is constant with filler level, but then decreases abruptly when carbon particles begin to aggregate. The diffusion coefficient decreases with increasing filler content, presumably owing to geometric effects and to polymer chain immobilization in the interfacial regions.     

Studies on the effects of coated Li2CO3 on lithium electrode

Although a lithium metal anode has a high energy density compared with a carbon insertion anode, the poor rechargeability prevents the practical use of anode materials. A lithium electrode coated with Li₂CO₃ was prepared as a negative electrode to enhance cycleability through the control of the solid electrolyte interface (SEI) layer formation in Li secondary batteries. The electrochemical characteristics of the SEI layer were examined using chronopotentiometry (CP) and impedance spectroscopy. The Li₂CO₃-SEI layer prevents electrolyte decomposition reaction and has low interface resistance. In addition, the lithium ion diffusion in the SEI layer of the uncoated and the Li₂CO₃-coated electrode was evaluated using chronoamperometry (CA).     

Estimation of the kinetic characteristics of sorption of an organic ion on a heterogeneous crosslinked polymer sorbent within the framework of a bidisperse model

For the sorption of rubomycin, an antitumor athracycline-type antibiotic, on BDM-12 carboxyl-containing heterogeneous crosslinked polymer sorbent, it was shown that the measured time dependences of the extent of process are determined by two characteristic times: τ₁ (in the range of short times) and τ₂ (at long times). A phenomenological theory of the kinetics of sorption on the heterogeneous sorbent was developed on the basis of a biporous sorbent model. The dependences of the characteristic times τ₁ and τ₂ on the sorbent grain radius were obtained. It was concluded that the theory makes predictions in good agreement with experimental data and allows calculating the most important kinetic parameters of sorption of organic ions on polymer sorbents: the time of diffusion of the sorbate into microgranules, the diffusion coefficient of the sorbate in transport pores, the effective coefficient of the sorbate diffusion into the heterogeneous sorbent, etc.     

Theoretical analysis of sorption of a binary solvent in a polymer phase. I. Occurrence and character of inversion in preferential sorption

Osmotic and sorption equilibria in the system polymer–binary solvent can be represented with advantage in coordinates (u₁, v₃), where v₃ is the volume fraction of the polymer and u₁ gives the composition (volume fraction) of the binary solvent in the polymer phase. The coexistence lines and osmotic isobars are plotted; the former are used to read the preferential sorption ε of one of the solvent components in the polymer. The newly formulated equilibrium condition for the preferential sorption is applied to the Flory–Huggins theory extended by the ternary interaction parameter χ_T. This is used as a starting point for analyzing the conditions under which inversion of preferential sorption takes place, i.e., the sign of ε changes. The existence of inversion and the course of the inversion line in the v₃ versus u₁ plot are affected in a decisive manner by the extent to which the effect of the mutual interaction of solvent components prevails over the effect of the relative difference between their molar volumes and of the difference in strength of their interaction with the polymer. The effect of the ratio of molar volumes upon the preferential sorption increases with the concentration of the polymer, so that for v₃ not too far from unity the component having the smaller molecule is necessarily sorbed preferentially. If, therefore, both types of small molecules are not of the same size, the inversion vanishes for large v₃ even in systems where it actually occurs if v₃ is small. On the contrary, the same effect can in other cases have as its consequence an inversion at moderate values of v₃, even if it does not appear as v₃ approaches zero; a similar effect can also be produced by a nonzero value of the interaction parameter χ_T. The neighborhood of the inversion line can have a “divergent” or a “convergent” character, depending on whether the component being preferentially sorbed is that present in excess. The former case is observed with negative and the latter for the positive values of the binary solvent–solvent interaction parameter χ₁₂. The inversion with the divergent neighborhood has not yet been confirmed experimentally, owing to the small number of systems investigated.     

The phase diagram of KNO3-KClO3

The binary phase diagram of KNO₃-KClO₃ is studied by means of differential scanning calorimetry (DSC) and high-temperature X-ray diffraction. The limited solid solutions, K(NO₃)_1−x(ClO₃)_x (0<x<0.20) and K(NO₃)_1−x(ClO₃)_x (0.90<x<1.0), were formed in the KNO₃-based solid solutions and KClO₃-based solid solutions phase, respectively. For KNO₃-based solid solutions, KNO₃ ferroelectric phase can be stable from 423 to 223 K as a result of substituting of NO₃ by ClO₃-radicals. The temperatures for solidus and liquidus have been determined based on limited solid solutions. Two models, Henrian solution and regular solution theory for KNO₃-based (α) phase and KClO₃-based (β) phase, respectively, are employed to reproduce solidus and liquidus of the phase diagram. The results are in good agreement with the DSC data. The thermodynamic properties for α and β solid solutions have been derived from an optimization procedure using the experimental data. The calculated phase diagram and optimized thermodynamic parameters are thermodynamically self-consistent.