Residential wood combustion: A source of atmospheric polycyclic aromatic hydrocarbons

Samples were taken of the atmospheric particulate matter over Fairbanks Alaska in the winter of 1985, and from wood stoves burning the major wood types locally available. These samples were then analyzed for polycyclic aromatic hydrocarbon (PAH). A PAH emission profile was determined from the wood stove samples and applied to the atmospheric samples to determine the residential wood combustion contribution to the local atmospheric particulate burden. Emission profiles for coal burning and automobile emissions for PAH were also used to estimate their relative contributions.     

Determination of polycyclic aromatic hydrocarbons in atmospheric particulate matter of Valencia city

Summary Polycyclic aromatic hydrocarbons (PAHs) were determined in atmospheric particulate matter in 11 sites of the Valencia area and at several times during the year. Sample analysis was carried out by ultrasonic acetonitrile extraction followed by reverse phase HPLC separation and fluorescence detection. The maximum concentration of total PAH developed in winter and spring. Mean values per sampling site varied from 0.193 to 1.668 g/m³ of filtered air. Environmental noise and temperature were determined at those same 11 sites and correlated with PAH levels.     

Ultrasound-assisted extraction and on-line LC–GC–MS for determination of polycyclic aromatic hydrocarbons (PAH) in urban dust and diesel particulate matter

A method has been developed for determination of polycyclic aromatic hydrocarbons (PAH) in particulate matter from ambient air and diesel exhaust emissions. It is reproducible and accurate and, compared with similar methods for analysis of individual PAH components in complex matrices, it is relatively fast and simple. Single PAH components can be determined in samples of particulate matter from ambient air and diesel exhaust emissions with LOD of approximately 1 pg/sample. Further, sample throughput is high, because more than 20 samples can be extracted and prepared for analysis in one working (8-h) day. The particulate matter is subjected to ultrasound-assisted extraction, a technique that is shown to extract PAH from particulate material with efficiencies fully comparable with those of Soxhlet extraction. An aliphatic/PAH-enriched fraction is obtained by solid-phase extraction before isolation, separation, and identification/quantification of PAH by on-line liquid chromatography–gas chromatography–mass spectrometry. The method was validated by analysis of US National Institute of Standards and Technology (NIST) Standard Reference Materials (SRM) 1649a, Urban Dust, and 2975, Diesel Particulate Matter. Results from the method are in good agreement with the NIST-certified PAH concentrations and with NIST reference PAH concentrations.     

Determination of polycyclic aromatic hydrocarbons from ambient air particulate matter using a cold fiber solid phase microextraction gas chromatography-mass spectrometry method

Polycyclic aromatic hydrocarbons (PAH) from ambient air particulate matter (PM) were analyzed by a new method that utilized direct immersion (DI) and cold fiber (CF) SPME-GC/MS. Experimental design was used to optimize the conditions of extraction by DI-CF-SPME with a 100μm polydimethylsiloxane (PDMS) fiber. The optimal conditions included a 5min equilibration at 70°C time in an ultrasonic bath with an extraction time of 60min. The optimized method was validated by the analysis of a NIST standard reference material (SRM), 1649b urban dust. The results obtained were in good agreement with certified values. PAH recoveries for reference materials were between 88 and 98%, with a relative standard deviation ranging from 5 to 17%. Detection limits (LOD) varied from 0.02 to 1.16ng and the quantification limits (LOQ) varied from 0.05 to 3.86ng. The optimized and validated method was applied to the determination of PAH from real particulate matter (PM10) and total suspended particulate (TPS) samples collected on quartz fiber filters with high volume samplers.     

Concentration and clean-up of trace hydrocarbons from atmospheric particulate matter

Summary The aim of this work is to establish the best conditions for concentration and purification steps in the trace analysis of aliphatic and polycyclic aromatic hydrocarbons (PAH) from atmospheric particulate matter by gas chromatography-flame ionisation detection (GC-FID) and high performance liquid chromatography with ultraviolet and fluorescence detection (HPLC-UV-FL). The best results for the more volatile compound were obtained with a combination of rotary evaporation and a stream of nitrogen (near to 100% for aliphatic hydrocarbons and from 70 to 105% for PAH). Two types of solid phase extraction (SPE)cartridges (Supelclean ^tm LC-Silica SPE tubes and Sep-Pak^? Plus silica cartridges) and glass column were examined for the purification and fractionation step. Blank chromatograms of both types of cartridges analysed by GC-FID made this study difficult, because a PSS (programmed split-splitless) injector was employed thereby increasing the sensitivity. This problem was not observed in the HPLC-UV-FL blank chromatograms of these cartridges. Glass columns filled with silica and alumina were chosen because no interference was found in the GC-FID blank chromatograms and the best recoveries in the fractionation of both aliphatic hydrocarbons and PAH were achieved. This is especially important when aliphatic hydrocarbons concentrations are lower than 1 μg mL⁻¹. Finally, the selected conditions were applied to the analysis of hydrocarbons in real atmospheric particulate samples.     

Analysis of nitrated polycyclic aromatic hydrocarbons by liquid chromatography with fluorescence and mass spectrometry detection: air particulate matter, soot, and reaction product studies

Polycyclic aromatic hydrocarbons (PAH) and their nitrated derivatives (nitro-PAH) are environmental pollutants which pose a threat to human health even at low concentration levels. In this study, efficient analytical methods for the analysis of nitro-PAH and PAH (extraction, clean-up, chromatographic separation, and spectrometric detection) have been developed, characterized, and applied to aerosol samples. The separation and quantification of 12 nitro-PAH was carried out by reversed-phase high performance liquid chromatography (HPLC), on-line reduction, and fluorescence detection. The detection limits were in the range of 0.03–0.5 g L^–1 (6–100 pg in the investigated sample aliquots), and the recovery rates from soot samples were 70–90%. Nitro-PAH and PAH concentrations have been determined for different types of soot and for urban, rural, and alpine fine air particulate matter (PM2.5). For the first time, trace amounts of nitro-PAH have been detected in a high-alpine clean air environment. The on-line reduction and fluorescence technique has been complemented by atmospheric pressure chemical ionization time-of-flight mass spectrometry (APCI-TOF-MS). The MS detection allowed the analysis of partially nitrated and oxygenated PAH in laboratory studies of the heterogeneous reaction of PAH on soot and glass fiber substrates with gaseous nitrogen oxides and ozone. It led to the tentative identification of a previously unknown nitrated derivative of the particularly toxic PAH benzo[a]pyrene (BaP-nitroquinone), and provides the first experimental evidence that PAH-nitroquinones can be formed by reaction of PAH with atmospheric photooxidants.     

Particle-size distribution of polycyclic aromatic hydrocarbons in urban air in southern Spain

The size distribution of polycyclic aromatic hydrocarbons (PAH) was determined for airborne particles from a large city with high vehicular traffic. The analytical method was optimised and validated using NIST standard reference material (SRM 1649a Urban Dust). The 16 priority PAH listed in the US-EPA were Soxhlet-extracted from filtered particulate matter and then fractionated using on-column chromatography. The aromatic fraction was quantified by gas chromatography-mass spectrometry. Real samples of particles collected in Seville (Spain) were analysed using the validated method. Values for the total concentration of PAH in the air, as well as the concentrations of each PAH in six particle-size ranges were obtained. Values of the PAH in TSP, PM₁₀, PM_2.5 and PM₁ were assessed.     

Determination of basic azaarenes and polynuclear aromatic hydrocarbons in airborne particulate matter by gas chromatography

Polynuclear aromatic hydrocarbons (PAH) and their nitrogen analogs, basic azaarenes, are extracted from samples of airborne particulate matter by toluene with ultrasonic treatment. The basic azaarenes are extracted from the toluene phase with phosphoric acid, re-extracted from the phosphoric acid phase (adjusted to pH 14 with potassium hydroxide) with dichloromethane, and determined by capillary gas chromatography (g.c.) with a nitrogen-sensitive detector. The PAH in the toluene phase are isolated by means of semipreparative high-performance liquid chromatography and liquid-liquid extraction and determined by g.c. with a flame-ionization detector. Eleven basic azaarenes were identified; their concentration were one to two orders of magnitude lower than those of PAH. Results from the determination of the concentrations of basic azaarenes and PAH in the atmosphere in a busy street and in a suburban residential area of Copenhagen are presented and discussed.     

Temporal variation of atmospheric polycyclic aromatic hydrocarbon concentrations in PM10 from the Kathmandu Valley and their gas-particle concentrations in winter

The concentrations of polycyclic aromatic hydrocarbons (PAHs) in particulate matter (PM) with a diameter <10 µm (PM₁₀, 50% cut off) were investigated in the Kathmandu Valley, Nepal, during 2003. In order to understand the dynamics of atmospheric PAHs in winter, the PAH concentrations in total PM and in the gaseous phase were investigated in the valley in December 2005. Total of 45 PAH compounds (∑45PAHs) were analysed by high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS). In 2003, the ∑45PAH concentrations in PM₁₀ ranged between 4.3 and 89 ng m^?3 (annual average; 27 ± 24 ng m^?3). The average concentrations of ∑45PAHs in December 2005 were 210 ± 33 ng m^?3 in total PM and 430 ± 90 ng m^?3 in the gaseous phase. The ∑45PAH concentration in PM accounted for more than 30% of the sum of their particulate and gaseous forms. Phenanthrene (Ph) was the most predominant compound in the gaseous phase, whereas four- to seven-ring PAHs were predominant in total PM. The highest values of ∑45PAHs occurred in the winter and spring. Estimates of emission sources based on diagnostic molecular ratios showed that atmospheric PAHs in the Kathmandu Valley mainly originated from the exhaust gas of diesel engine. In the winter and spring, PAH pollution would be accelerated by the operations of brick kilns and the frequent formation of an atmospherically stable layer in the valley.     

Rapid and sensitive determination of polycyclic aromatic hydrocarbons in atmospheric particulates using fast high-performance liquid chromatography with on-line enrichment system

A method using on-line enrichment and fast high-performance liquid chromatography (HPLC) with fluorescence detection has been developed and validated for the determination of polycyclic aromatic hydrocarbons (PAHs) in atmospheric particulate samples. The evaporation step for sample preparation can be eliminated since this system allows the injection of 1000microL of sample solution. PAH recoveries were between 87% and 120% for spiked atmospheric particulate samples. The limit of detection was 0.02-0.23ng/mL (signal/noise ratio=3.3). There was good linear correlation between HPLC peak area and PAH concentration, with a linear range of 0.4-40ng/mL and correlation coefficients >0.997. Furthermore, compared to conventional approaches that include an evaporation step, the method proposed is acceptable for detecting PAHs in atmospheric particulate samples.     

Novel Extraction for Endocrine Disruptors in Atmospheric Particulate Matter

A rapid and efficient sample preparation method, which is called microwave-assisted microsolid phase extraction, was developed for the determination of endocrine disrupting chemicals in atmospheric particulate matter. The endocrine disrupting chemicals included bisphenol A, diethyl phthalate, dibutyl phthalate, and di(2-ethylhexyl) phthalate. The endocrine disrupting chemicals were isolated by microwave-assisted extraction following adsorption by copper(II) isonicotinate using microsolid phase extraction. The endocrine disrupting chemicals were subsequently determined by high performance liquid chromatography with an ultraviolet detector. The extraction was optimized for temperature, time, desorption time, and desorption solvent. Limits of detection (in the range of 2.0–8.5 nanograms per liter), limits of quantification (in the range of 6.6–28.0 nanograms per liter), and repeatability of the procedure (less than 10 percent) were established. Diethyl phthalate, diethyl phthalate, and di(2-ethylhexyl) phthalate were determined at values from 0.57 to 68.8 nanograms per cubic meter in atmospheric particulate matter collected from an urban area, a business center, and an industrial site in Dongguan, China. The concentration of bisphenol A was below the detection limit in these samples.     

Environmental PAH analysis by gas chromatography–atmospheric pressure laser ionization–time-of-flight–mass spectrometry (GC-APLI-MS)

The application of polycyclic aromatic hydrocarbon (PAH) analysis by gas chromatography coupled with atmospheric pressure laser ionization and mass spectrometry (GC-APLI-MS) to environmental samples was investigated in the study. The limit of detection for 40 PAH in a standard mixture was 5–100 fg, demonstrating GC-APLI-MS to be a highly sensitive technique and more sensitive by a factor of 100–3,500 compared to GC-MS. Acenaphthylene and cyclopenta[cd]pyrene were not detectable <2,500 fg per injection. To make use of this very high PAH sensitivity, the technique was applied to samples of environmental interest with limited available sample amounts such as particulate matter (PM), soot and a sample from a bioaccumulation test with Lumbriculus variegatus. First, special sample preparation was necessary and ultrasonic extraction proved to be suitable, if a thorough clean-up was performed and plastic materials avoided. By GC-APLI-MS and GC-MS, 224 and 28 single PAH compounds were detected in PM, about 1,000 and 15 in birch soot, and 9 and 2 in worm tissue, respectively, revealing the enormous potential of the method. The selectivity of GC-APLI-MS was shown for a crude oil where >2,200 PAH were detected without any sample preparation.     

Cadmium and Lead Distribution in Marine Soil Sediments,Terrestrial Soil,Terrestrial Rock,and Atmospheric Particulate Matter around Split,Croatia

The distributions of cadmium and lead in marine sediments, surrounding soil, stones, and atmospheric particulate matter were determined at different locations in Split, Croatia. The determination of cadmium and lead was performed by flame atomic absorption spectrometry whereas atmospheric particulate matter samples were analyzed by inductively coupled plasma–optical emission spectrometry. Cadmium concentrations in the stones and soil were between 0.2 to 0.6 µg g^?1 and 0.2 to 0.9 µg g^?1. The concentration in the atmospheric particulate matter were <0.2 µg m^?2 d^?1(detection limit) to 1.4 µg m^?2 d^?1. Lead concentrations in marine sediments, stones, soil, and atmospheric particulate matter ranged from 31.2 to 144.4 µg g^?1, 9.3 to 29.4 µg g^?1, 11.3 to 66.1 µg g^?1, and 0.5 to 241.4 µg m^?2 d^?1, respectively. The relationship between determined parameters was established using principal component analysis and the results are in agreement with the assumption that anthropogenic sources play important roles for lead and cadmium distribution.     

Simultaneous liquid chromatographic determination of 39 polycyclic aromatic hydrocarbons in indoor and outdoor air and application to a survey on indoor air pollution in Fuji, Japan

An analytical method was established for the simultaneous determination of 39 polycyclic aromatic hydrocarbons (PAHs) in air. The method was applied to a survey of gaseous and particulate PAHs in household indoor air. The survey was performed in 21 houses in the summer of 1999 and in 20 houses in the winter of 1999-2000 in Fuji, Japan. Thirty-eight PAHs were determined in indoor and outdoor air in the summer, and 39 PAHs were determined in indoor and outdoor air in the winter. The concentrations of gaseous PAHs in indoor air tended to be higher than those in outdoor air in the summer and winter. The concentrations of particulate PAHs in indoor air were the same as or lower than those in outdoor air in the summer and winter. PAH profiles, correlations between PAH concentrations, and multiple regression analysis were used to determine the factors affecting the indoor PAH concentrations. These results showed that gaseous PAHs in indoor air were primarily from indoor emission sources, especially during the summer, and that indoor particulate PAH concentrations were significantly influenced by outdoor air pollution.     

Selective sequential dissolution for the determination of inorganic indium compounds in the particulate matter of emissions and workplace air.

A speciation method was developed for the determination of inorganic indium compounds in the particulate matter of emissions and from the workplace, based on selective sequential extractions. The main inorganic indium compounds that are expected to be present in the atmospheric particulate matter involving the industrial production of indium and in the manufacture of indium compounds were separated and determined. The procedure has been tested on standard reference materials. The indium recovery was in the range 93 - 105%.     

Hydride generation atomic fluorescence spectrometric determination of As, Bi, Sb, Se(IV) and Te(IV) in aqua regia extracts from atmospheric particulate matter using multivariate optimization

A highly sensitive and simple method, based on hydride generation and atomic fluorescence detection, has been developed for the determination of As, Bi, Sb, Se(IV) and Te(IV) in aqua regia extracts from atmospheric particulate matter samples. Atmospheric particulates matter was collected on glass fiber filters using a medium volume sampler (PM1 particulate matter). Two-level factorial designs have been used to optimise the hydride generation atomic fluorescence spectrometry (HG-AFS) procedure. The effects of several parameters affecting the hydride generation efficiency (hydrochloric acid, sodium tetrahydroborate and potassium iodide concentrations and flow rates) have been evaluated using a Plackett-Burman experimental design. In addition, parameters affecting the hydride measurement (delay, analysis and memory times) have been also investigated. The significant parameters obtained (sodium tetrahydroborate concentration, sodium tetrahydroborate flow rate and analysis time for As; hydrochloric acid concentration and sodium tetrahydroborate flow rate for Se(IV); and sodium tetrahydroborate concentration and sodium tetrahydroborate flow rate for Te(IV)) have been optimized by using 2ⁿ + star central composite design. Hydrochloric acid concentration and sodium tetrahydroborate flow rate were the significant parameters obtained for Sb and Bi determination, respectively. Using a univariate approach these parameters were optimized. The accuracy of methods have been verified by using several certified reference materials: SRM 1648 (urban particulate matter) and SRM 1649a (urban dust). Detection limits in the range of 6 × 10⁻³ to 0.2 ng m⁻³ have been achieved. The developed methods were applied to several atmospheric particulate matter samples corresponding to A Coruña city (NW Spain).     

Application of direct thermal desorption gas chromatography time-of-flight mass spectrometry for determination of nonpolar organics in low-volume samples from ambient particulate matter and personal samplers

Direct thermal desorption and in-situ derivatization thermal desorption methods in conjunction with gas chromatography time-of-flight mass spectrometry have been characterized and evaluated for analysis of trace components from filters loaded with ambient particulate matter (PM). The limits of quantification were in the range of 7–24 pg for n-alkanes, 20 pg for hopanes, and 4–22 pg for polycyclic aromatic hydrocarbons (PAH). The limit of quantification was defined as the minimum amount of substance that conforms to the minimum distinguishable signal plus 9 times the standard deviation of this background signal from PM-loaded filters. The method has been successfully applied to low-volume samples from ambient PM collected with stationary and personal samplers. Stationary samples were collected in winter 2008 and 2010 in Augsburg, Germany. Sample aliquots of 0.2-0.3 m3 from stationary sampling were analyzed. High diurnal variation in concentration and source contribution was found especially during periods with low wind speed and low mixing layer height. High contributions of solid fuel combustion (wood and coal) were found in evening and nighttime samples, leading to peak PAH concentrations at midnight more than 10 times higher than at noon. Finally, the method was applied to samples collected by means of a personal sampler, i.e. a micro aethalometer, in Xi’an, China. Quantitative data on n-alkanes, hopanes, and PAH were obtained from sample volumes of 17 and 24 l. The impact of different sources such as vehicular and biogenic emissions could be distinguished.     

Desorptivity versus chemical reactivity of polycyclic aromatic hydrocarbons (PAHs) in atmospheric aerosols collected on quartz fiber filters

Nine polycyclic aromatic hydrocarbons (PAHs) contained in air samples collected on quartz fiber filters inside an urban tunnel and in a nearby mixed commercial residential area in the city of Rio de Janeiro, Brazil, were exposed to scrubbed air (to measure desorption loss) and to particle-free ambient air (to measure chemical reaction losses in the absence of desorption). The exposures were conducted for 5.5 to 9 hour periods at ambient temperature (22-26 degrees C) at face velocities typical of high volume sampling. Under prevailing atmospheric conditions all nine PAHs experienced filter losses which (for most of them) followed first order kinetics. For the ambient samples, in a 6 hour exposure period, the following five PAHs showed filter losses (% in parantheses) attributed exclusively to chemical reaction: benzo(b)fluoranthene (43), benzo(k)fluoranthene (39), benzo(a)pyrene (70), benzo(ghi)perylene (44), and indeno (1,2,3-cd)pyrene (41). The other four showed the following unassigned losses: pyrene (100), fluoranthene (65), crysene (72), and benzo(a)anthracene (71). The results are discussed in the light of possible filter artifacts in PAH sampling and the use of PAH profile signatures for source identification of atmospheric particulate matter in receptor modeling.     

Determination of selected polycyclic aromatic hydrocarbons and oxygenated polycyclic aromatic hydrocarbons in aerosol samples by high-performance liquid chromatography and liquid chromatography–tandem mass spectrometry

Fine and ultrafine particles are probably responsible for numerous health effects, but it is still unclear whether and to what extent the particle itself or organic compounds adsorbed or condensed on the particle are responsible for the effects observed. One important class of particle-bound substances are the polycyclic aromatic hydrocarbons (PAH) and their oxygenated derivatives. To improve the tools used for chemical characterization of particulate matter analytical methods for the determination of PAH and oxygenated PAH in aerosol samples of different origin have been developed and optimized. PAH on high-volume filters and on soot aerosols were analyzed by using accelerated solvent extraction for extraction and high-performance liquid chromatography with fluorescence detection for separation and quantification. Total PAH concentrations were in the range 0.3–9.3 ng m^–3. For analysis of selected oxygenated PAH on high-volume filters a liquid chromatography–tandem mass spectrometric method was developed and optimized. Preliminary investigations showed that oxygenated PAH at pg m^–3 concentrations can be determined.     

Data quality of PAH determinations in environmental monitoring

The sources of uncertainty affecting measurements of pollutants include sample collection, handling and stocking, and analytical procedure. With regard to chemical analysis, MS detection offers a series of advantages for resolving complex mixtures and identify and quantify analytes present at very small extents. Nevertheless, it presents some problems of reproducibility, which can affect the quality of quantitative data. PAH represent key-compounds among atmospheric pollutants and are usually evaluated by means of dedicated methods comprising MS detection. Based upon the above considerations, an analytical method has been standardized, suitable for determining PAH in atmospheric aerosols and diesel particulate exhausts. To test the procedure, both diesel particulate and urban aerosol NIST reference materials (SRM-2975 and SRM-1649A, respectively) have been processed and the results have been compared with certified and/or literature data. The results obtained are shortly discussed.