Improved procedures for N-terminal sulfonation of peptides for matrix-assisted laser desorption/ionization post-source decay peptide sequencing

Post source decay (PSD) analysis of precursor ions generated from matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry is a powerful tool for amino acid sequencing and primary structure analysis of proteins. N-Terminal sulfonation has become an effective derivatization strategy in facilitating de novo peptide sequencing by the formation of predominate y-type ion series in MALDI PSD spectra. Recently, an effective and inexpensive N-terminal derivatization method has been reported using 4-sulfophenyl isothiocyanate (SPITC) as the derivatization reagent (J. Mass. Spectrom. 2003; 38: 373-377). In this paper, we report an improvement in the derivatization procedure with this reagent that involves replacing an organic co-reagent with other chemicals and eliminating the use of organic solvent. The method is demonstrated on a model peptide and on tryptic digests of two proteins. The results indicate that the improved sulfonation reaction can be implemented with high efficiency under aqueous conditions and that the sensitivity of mass detection can be increased considerably.     

Dimethyl isotope labeling assisted de novo peptide sequencing

Here, we explore a de novo sequencing strategy in which we combine Lys-N protein digestion with differential isotopic dimethyl labeling to facilitate the (de novo) identification of multiply charged peptides in ESI-MS, both under CID and ETD conditions. For a large fraction of the Lys-N generated peptides, all primary amines are present at the N-terminal lysine, enabling specific labeling of the N-terminus. Differential derivatization of only the peptide N-terminus in combination with the simultaneous fragmentation of the corresponding isotopologues allows the straightforward distinction of N-terminal fragments from C-terminal and internal fragments. Furthermore, also singly and multiply charged N-terminal fragments can easily be distinguished due to the mass differences of the isotope labeled fragment pairs. As a proof of concept, we applied this approach to proteins isolated from an avocado fruit, and were able to partially de novo sequence and correctly align, with green plant homologues, a previously uncharacterized avocado ascorbate peroxidase.     

Specific isolation of N-terminal fragments from proteins and their high-fidelity de novo sequencing

A new method to determine N-terminal amino acid sequences of multiple proteins at low pmol level by a parallel processing has been developed. The method contains the following five steps: (1) reduction, S-alkylation and guanidination for targeted proteins; (2) coupling with sulfosucccimidyl-2-(biotinamido)ethyl-1,3-dithiopropionate(sulfo-NHS-SS-biotin) to N(alpha)-amino groups of proteins; (3) digestion of the modified proteins by an appropriate protease; (4) specific isolation of N-terminal fragments of proteins by affinity capture using the biotin-avidin system; (5) de novo sequence analysis of peptides by MALDI-TOF-/MALDI-TOF-PSD mass spectrometry with effective utilization of the CAF (chemically assisted fragmentation) method.1 This method is also effective for N-terminal sequencing of each protein in a mixture of several proteins, and for sequencing components of a multiprotein complex. It is expected to become an essential proteomics tool for identifying proteins, especially when used in combination with a C-terminal sequencing method.     

Bromine isotopic signature facilitates de novo sequencing of peptides in free‐radical‐initiated peptide sequencing (FRIPS) mass spectrometry

We recently showed that free‐radical‐initiated peptide sequencing mass spectrometry (FRIPS MS) assisted by the remarkable thermochemical stability of (2,2,6,6‐tetramethyl‐piperidin‐1‐yl)oxyl (TEMPO) is another attractive radical‐driven peptide fragmentation MS tool. Facile homolytic cleavage of the bond between the benzylic carbon and the oxygen of the TEMPO moiety in o‐TEMPO–Bz–C(O)–peptide and the high reactivity of the benzylic radical species generated in ?Bz–C(O)–peptide are key elements leading to extensive radical‐driven peptide backbone fragmentation. In the present study, we demonstrate that the incorporation of bromine into the benzene ring, i.e. o‐TEMPO–Bz(Br)–C(O)–peptide, allows unambiguous distinction of the N‐terminal peptide fragments from the C‐terminal fragments through the unique bromine doublet isotopic signature. Furthermore, bromine substitution does not alter the overall radical‐driven peptide backbone dissociation pathways of o‐TEMPO–Bz–C(O)–peptide. From a practical perspective, the presence of the bromine isotopic signature in the N‐terminal peptide fragments in TEMPO‐assisted FRIPS MS represents a useful and cost‐effective opportunity for de novo peptide sequencing. Copyright © 2015 John Wiley & Sons, Ltd.     

PEAKS: powerful software for peptide de novo sequencing by tandem mass spectrometry

A number of different approaches have been described to identify proteins from tandem mass spectrometry (MS/MS) data. The most common approaches rely on the available databases to match experimental MS/MS data. These methods suffer from several drawbacks and cannot be used for the identification of proteins from unknown genomes. In this communication, we describe a new de novo sequencing software package, PEAKS, to extract amino acid sequence information without the use of databases. PEAKS uses a new model and a new algorithm to efficiently compute the best peptide sequences whose fragment ions can best interpret the peaks in the MS/MS spectrum. The output of the software gives amino acid sequences with confidence scores for the entire sequences, as well as an additional novel positional scoring scheme for portions of the sequences. The performance of PEAKS is compared with Lutefisk, a well-known de novo sequencing software, using quadrupole-time-of-flight (Q-TOF) data obtained for several tryptic peptides from standard proteins.     

De novo peptide sequencing using exhaustive enumeration of peptide composition

We introduce the use of a peptide composition lookup table indexed by residual mass and number of amino acids for de novo sequencing of polypeptides. Polypeptides of 1600 Daltons (Da) or more can be sequenced effectively through exhaustive compositional analysis of MS/MS spectra obtained by unimolecular decomposition (without CID) in a MALDI TOF/TOF despite a fragment mass accuracy of 50 mDa. Peaks are referenced against the lookup table to obtain a complete profile of amino acid combinations, and combinations are assembled into series of increasing length. Concatenating the differences between successive entries in compositional series yields peptide sequences that can be scored and ranked according to signal intensity. While the current work involves measurements acquired on MALDI TOF-TOF, such general treatment of the data anticipates extension to other types of mass analyzers.     

Selective isolation of N-terminal peptides from proteins and their de novo sequencing by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry without regard to unblocking or blocking of N-terminal amino acids

We have developed a new method to determine the N-terminal amino acid sequences of proteins, regardless of whether their N-termini are modified. This method consists of the following five steps: (1) reduction, S-alkylation and guanidination for targeted proteins; (2) coupling of sulfo-NHS-SS-biotin to N(alpha)-amino groups of proteins; (3) digestion of the modified proteins by an appropriate protease followed by oxidation with performic acid; (4) specific isolation of N-terminal peptides from digests using DITC resins; (5) de novo sequence analysis of the N-terminal peptides by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) using the CAF (chemically assisted fragmentation) method or tandem mass spectrometric (MS/MS) analysis according to unblocked or blocked peptides, respectively. By employing DITC resins instead of avidin resins used in our previous method (Yamaguchi et al., Rapid Commun. Mass Spectrom. 2007; 21: 3329), it has been possible to isolate selectively N-terminal peptides from proteins regardless of modification of N-terminal amino acids. Here we propose a universal method for N-terminal sequence analysis of proteins.     

De novo sequencing of peptides using MALDI/TOF-TOF

The recently developed MALDI TOF-TOF instrument yields relatively complex but interpretable fragmentation spectra. When coupled with a straightforward sequence extension algorithm, it is possible to develop complete peptide sequences de novo from the spectra. This approach has been applied to a set of peptides derived from typtic digestion of electrophoretically separated sea urchin egg membrane proteins. When directed to proteins that have been described previously, the results were in essential agreement with those obtained by conventional data base searching approaches, with certain important exceptions. The present method detected errors in published sequences and was able to develop sequences from peptides differing in mass by one dalton (Da). These results show both the power of the present approach and the need for using de novo methods more frequently than may be otherwise appreciated.     

An effective method for de novo peptide sequencing based on phosphorylation strategy and mass spectrometry

An effective method for peptide sequencing based on phosphorylation strategy and UPLC-MS/MS is proposed in this report. A phosphorylation reaction was carried out by mixing model peptide solution with phosphorylation solution. UPLC-MS/MS was used to analyze and characterize the phosphorylated peptides in the optimized ramp collision energy mode. The results illustrated that this phosphorylation approach significantly strengthened the signal intensity of both a₁ and b series ions of the spectra of the modified peptides. It also can be used to effectively distinguish glutamine (Q) and lysine (K) residues in peptides. The feasibility of this approach was validated by analyzing the trypsin-digested BSA. Data suggested that this proposed method could be a useful tool for the de novo peptide sequencing in proteome research.     

An algorithm for interpretation of low-energy collision-induced dissociation product ion spectra for de novo sequencing of peptides

An algorithm for interpretation of product ion spectra of peptides generated from ion trap mass spectrometry is developed for de novo amino acid sequencing of peptides for the purpose of protein identification. It is based on a multi-pass analysis of product ion data using a rigorous data extraction and sequence interpretation protocol in the initial pass. The extraction/interpretation algorithm becomes more relaxed in subsequent passes, considering more of the fragment ions, and potentially more sequence candidates. The possible peptide sequences generated by the algorithm are scored according to those sequences which best explain the fragment ion spectrum. These sequences are searched against a protein database using a BLAST search engine to find likely protein candidates. The method is also suitable for locating and determining protein modifications, and can be applied to de novo interpretation of peptide fragment ions in the tandem mass (MS/MS) spectrum produced from a mixture of two peptides having similar nominal mass, but different sequences. Using a known protein, bovine serum albumin, as an example, it is illustrated that this method is rapid and efficient for MS/MS spectral interpretation. This method combined with BLAST programs is then applied to search homologies and to generate information on post-translational modifications of an unknown protein isolated from shark cartilage that does not have a complete genome or proteome database.     

An improved method for de novo sequencing of arginine-containing, Nalpha-tris(2,4,6-trimethoxyphenyl)phosphonium-acetylated peptides

An improved method for de novo sequencing of arginine-containing peptides modified with succinimidyloxycarbonylmethyl tris(2,4,6-trimethoxyphenyl)phosphonium bromide (TMPP-Ac-OSu) is reported. A tagging reagent, TMPP-Ac-OSu, was introduced to improve the sequence analysis of peptides owing to the simplified fragmentation pattern. However, peptides containing arginine residues did not fragment efficiently even after TMPP-Ac modification at their N-termini. This report describes how fragmentation efficiency of TMPP-Ac-modified arginine-containing peptides was significantly improved by modifying the guanidino group on the side chain of arginine with acetylacetone.     

Simplification of complex peptide mixtures for proteomic analysis: reversible biotinylation of cysteinyl peptides

A rapid means of identifying many components in an enriched mixture of proteins is enzymatic digestion of the entire protein fraction. This complex peptide mixture is then subjected to reversed-phase high performance liquid chromatography (HPLC) coupled on-line with a mass spectrometer capable of data-dependent ion selection for fragmentation (LC-tandem mass spectrometry; MS/MS). Thus, as many peptides as possible in the sample are fragmented to produce MS/MS spectra, which can then be searched against sequence databases. Ideally, one peptide from each protein in the mixture would be fragmented and identified. To this end, we employed an affinity selection method to capture cysteinyl peptides and thereby simplify the mixture. Both the captured cysteinyl and the noncysteinyl peptides are analyzed by LC-MS/MS, to increase the number of proteins identified. The method was tested on a limited set of standard proteins and applied to the analysis of a protein fraction obtained from isolated mitochondria treated with atractyloside. To further increase the number of different precursor ions selected for fragmentation, dynamic exclusion and ion selection from multiple narrow mass ranges of consecutive runs were employed.     

Oxidation versus carboxamidomethylation of s-s bond in ranid frog peptides: Pro and contra for de novo MALDI-MS sequencing

Five natural peptides isolated from ranid skin secretions of European frog species of Rana ridibunda and Rana arvalis (molecular masses 3516, 2674, 2636, 1874, and 1810 Da) were studied by MALDI-TOF/TOF to compare two procedures of disulfide bond cleavage: (1) performic oxidation and (2) reduction/carboxamidomethylation. The processes are relevant for the elucidation of the amino acid sequence inside the seven-member cystine ring at the C-terminus. The results clearly demonstrated that oxidation of the disulfide bond led to notably higher abundances of b- and y-ions, corresponding to the C-terminal peptide bonds, than reduction/carboxamidomethylation. This conclusion is true for all five peptides studied. Besides that, the oxidation procedure is simpler than carboxamidomethylation, as it is a one-step process with no purification required. The oxidation is more reproducible. The results were similar each time the peptide was subjected to the process. It was successfully applied to all five peptides while reduction/carboxamidomethylation failed in the case of brevinin-1Ra, despite all variations of reaction conditions.     

Sequit: software for de novo peptide sequencing by matrix-assisted laser desorption/ionization post-source decay mass spectrometry

Peptide sequencing by mass spectrometry is gaining increasing importance for peptide chemistry and proteomics. However, available tools for interpreting matrix-assisted laser desorption/ionization post-source decay (MALDI-PSD) mass spectra depend on databases, and identify peptides by matching experimental data with spectra calculated from database sequences. This severely obstructs the identification of proteins and peptides not listed in databases or of variations, e.g. mutated proteins. The development of a new computer program for database-independent peptide sequencing by MALDI-PSD mass spectrometry is reported here. This computer program was validated by the determination of the correct sequences for various peptides including sequences listed in the sequence databases, but also for peptides that deviate from database sequences or are completely artificial. This strategy should substantially facilitate the identification of novel or variant peptides and proteins, and increase the power of MALDI-PSD analyses in proteomics.     

Formation of c1 fragment ions in collision-induced dissociation of glutamine-containing peptide ions: a tip for de novo sequencing

A c1 ion was observed with significant yield in the tandem mass (MS/MS) spectra of peptide ions containing glutamine as the second amino acid residue from the N-terminus. The c1 fragment was generated independently of the N-terminal residue of the peptide, but its abundance was strongly dependent on the side-chain identity. This ion is not a common fragmentation product in low-energy collision-induced dissociation of peptide ions, but it assists in identification of the first two amino acid residues, often difficult due to a low or absent signal from the heaviest y ion. A consecutive fragmentation mechanism is proposed, involving a b2 ion with a six-membered ring as an intermediate, to explain the exceptional stability of the c1 fragment ion. The utility of this information is discussed, especially in de novo sequencing of peptide ions.     

Individual b2 ion fragmentation profiles combined with AspN digestion improve N-terminal peptide sequencing

The N terminus of peptides generated by AspN is restricted to about 40 dipeptide motifs starting with D or E. These motifs are visible upon collision-induced dissociation (CID) as b₂ ions, which are often the most abundant low-mass fragment ions. It was observed that b₂ ions are accompanied by a set of sequence-specific neutral losses of CO, H₂O, NH₃, and some other small units. To test the utility of these profiles as additional parameters for reliable assignment of the b₂ ion motif besides its m/z value, the CID spectra of 221 different AspN-generated peptides covering all N-terminal D-X and E-X motifs were recorded. Qualitatively, the b₂ ion fragmentation profiles of individual motifs were found to exhibit little dependency on the rest of the peptide sequence. Thus, it is concluded that the set of b₂ ion fragmentation profiles recorded in this study can be used as reference set. Knowledge of these profiles provides an increased specificity for b₂ ion annotation of AspN-generated peptides compared to the use of only a solitary b₂ ion m/z value. Recognition of the b₂ ion motif provides a two-amino-acid sequence including its direction; it provides the location of this motif at the N terminus, and it sets a starting point for further extension of the b ion series.     

Tandem mass spectrometry of peptides with N-terminal glutamine studies on a prion protein peptide

Journal of The American Society for Mass Spectrometry - This paper reports the unusual collision-induced fragmentation of peptides having N-terminal glutamine. One of these glutamine-containing...     

Derivatization procedures to facilitate de novo sequencing of lysine-terminated tryptic peptides using postsource decay matrix-assisted laser desorption/ionization mass spectrometry

Guanidination of the epsilon-amino group of lysine-terminated tryptic peptides can be accomplished selectively in one step with O-methylisourea hydrogen sulfate. This reaction converts lysine residues into more basic homoarginine residues. It also protects the epsilon-amino groups against unwanted reaction with sulfonation reagents, which can then be used to selectively modify the N-termini of tryptic peptides. The combined reactions convert lysine-terminated tryptic peptides into modified peptides that are suitable for de novo sequencing by postsource decay matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. The guanidination reaction is very pH dependent. Product yields and reaction kinetics were studied in aqueous solution using either NaOH or diisopropylethylamine as the base. Methods are reported for derivatizing and sequencing lysine-terminated tryptic peptides at low pmole levels. The postsource decay (PSD) MALDI tandem mass spectra of a model peptide (VGGYGYGAK), the homoarginine analog and the sulfonated homoarginine analog are compared. These spectra show the influence that each chemical modification has on the peptide fragmentation pattern. Finally, we demonstrate that definitive protein identifications can be achieved by PSD MALDI sequencing of derivatized peptides obtained from solution digests of model proteins and from in-gel digests of 2D-gel separated proteins.     

Automated de novo sequencing of nucleic acids by liquid chromatography-tandem mass spectrometry

We present the first global computer-aided sequencing algorithm for the de novo determination of short nucleic acid sequences. The method compares the fragment ion spectra generated by collision-induced dissociation of multiply charged oligodeoxynucleotide-ions to the m/z values predicted employing established fragmentation pathways from a known reference sequence. The closeness of matching between the measured spectrum and the predicted set of fragment ions is characterized by the fitness, which takes into account the difference between measured and predicted m/z values, the intensity of the fragment ions, the number of fragments assigned, and the number of nucleotide positions not covered by fragment ions in the experimental spectrum. Smaller values for the fitness indicate a closer match between the measured spectrum and predicted m/z values. In order to find the sequence most closely matching the experimental spectrum, starting from a given nucleotide composition all possible oligonucleotide sequences are assembled followed by identification of the correct sequence by the lowest fitness value. Using this concept, sequences of 5- to 12-mer oligodeoxynucleotides were successfully de novo determined. High sequence coverage with fragment ions was essential for obtaining unequivocal sequencing results. Moreover, the collision energy was shown to have an impact on the interpretability of tandem mass spectra by the de novo sequencing algorithm. Experiments revealed that the optimal collision energy should be set to a value just sufficient for complete fragmentation of the precursor ion.