Synthesis of Comblike Poly（methyl methacrylate） by Atom Transfer Radical Polymerization with Poly（ethyl 2-bromoacrylate） as Macroinitiator

Comblike poly(methyl methacrylate) was synthesized by atom transfer radical polymerization of methyl methacrylate with poly(ethyl 2-bromoacrylate) as a macroinitiator, which was prepared by conventional free radical polymerization of ethyl 2-bromoacrylate. The obtained comblike polymers were characterized by GPC and ^1H NMR.     

Synthesis of Fullerene-end Functionalized Poly（methyl methacrylate） via Reverse Atom Transfer Radical Polymerization

The use of the reverse atom transfer radical polymerization （RATRP） to end-functionalize poly（methyl methacrylate） （PMMA） with fullerenes, e.g. C60 and C70 was described in this paper. The Cl-terrninated PMMA was prepared via RATRP with designed molecular weight and narrow molecular weight distributions, and then directly used to react with fullerenes to produce C60（C70） terminated PMMA polymers in the presence of CuBr/Cu/bipy or FeCl2/bipy catalysts. The resultant polymers exhibit good solubility in some common organic solvents, e.g. THF, CHCl3 and toluene, and were well structurally characterized by a variety of physical techniques.     

Synthesis and characterization of poly(methyl methacrylate)‐block‐poly(methylphenylsilane)‐ block‐poly(methyl methacrylate) by atom transfer radical polymerization

ABA block copolymers of methyl methacrylate and methylphenylsilane were synthesized with a methodology based on atom transfer radical polymerization (ATRP). The reaction of samples of α,ω‐dihalopoly(methylphenylsilane) with 2‐hydroxyethyl‐2‐methyl‐2‐bromoproprionate gave suitable macroinitiators for the ATRP of methyl methacrylate. The latter procedure was carried out at 95 °C in a xylene solution with CuBr and 2,2‐bipyridine as the initiating system. The rate of the polymerization was first‐order with respect to monomer conversion. The block copolymers were characterized with ¹H NMR and ¹³C NMR spectroscopy and size exclusion chromatography, and differential scanning calorimetry was used to obtain preliminary evidence of phase separation in the copolymer products. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 30–40, 2003     

利用反向原子转移自由基聚合反应合成聚甲基丙烯酸缩水甘油酯

以偶氮二异丁腈为引发剂,CuBr2/bpy为催化体系,甲基丙烯酸缩水甘油酯(GMA)通过反向原子转移自由基聚合反应合成了聚甲基丙烯酸缩水甘油酯(PGMA),其结构经1H NMR,IR和GPC确证。聚合反应符合活性自由基聚合特征,在聚合过程中GMA转化率和PGMA分子量随反应时间的延长而增大,分子量分布较窄。     

甲基丙烯酸甲酯原子转移自由基聚合等规度研究

在0～100℃温度范围内,由原子转移自由基聚合方法,采用助催化和非助催化体系,引发甲基丙烯酸甲酯聚合,利用¹³CNMR测定聚甲基丙烯酸甲酯的等规度.发现原子转移自由基聚合仍以间同立构为主,随着聚合温度的升高间同立构等规度降低,与通常自由基聚合对有规立构控制特征相似.助催化剂异丙醇铝和活性端羰基配位,对聚合物的立构规整性有一定的影响.     

Synthesis of Poly(methyl methacrylate)-poly(poly(ethylene glycol) methacrylate)-polyisobutylene ABCBA Pentablock Copolymers by Combining Quasiliving Carbocationic and Atom Transfer Radical Polymerizations and Characterization Thereof

Novel, unique amphiphilic pentablock terpolymers consisting of the highly hydrophobic polyisobutylene (PIB) mid-segment attached to the hydrophilic combshaped poly(poly(ethylene glycol) methacrylate) (PPEGMA) polymacromonomer chains, which are coupled to poly(methyl methacrylate) (PMMA) outer segments were synthesized by the combination of quasiliving carbocationic polymerization and atom transfer radical polymerization (ATRP). First, a bifunctional PIB macroinitiator was prepared by quasiliving carbocationic polymerization and subsequent quantitative chain end derivatizations. Quasiliving ATRP of PEGMAs with different molecular weights (M_n = 188, 300 and 475 g/mol) led to triblock copolymers which were further reacted with MMA under ATRP conditions to obtain PMMA-PPEGMA-PIB-PPEGMA-PMMA ABCBA-type pentablock copolymers. It was found that slow initiation takes place between the PIB macroinitiator and PEGMA macromonomers with higher molecular weights via ATRP. ATRP of MMA with the resulting block copolymers composed of PIB and PPEGMA chain segments led to the desired block copolymers with high initiating efficiency. Investigations of the resulting pentablock copolymers by DSC, SAXS and phase mode AFM revealed that nanophase separation occurs in these new macromolecular structures with average domain distances of 11-14 nm, and local lamellar self-assembly takes place in the pentablocks with PPEGMA polymacromonomer segments of PEGMAs with M_n of 118 g/mol and 300 g/mol, while disordered nanophases are observed in the block copolymer with PEGMA having molecular weight of 475 g/mol. These new amphiphilic block copolymers composed of biocompatible chain segments can find applications in a variety of advanced fields.     

原子转移自由基悬浮聚合制备PVC-g-PMMA共聚物

原子转移自由基悬浮聚合制备PVC-g-PMMA共聚物;聚氯乙稀;甲基丙烯酸甲酯;原子转移自由基悬浮聚合     

Atom transfer radical polymerization of methyl methacrylate at ambient temperature using soluble Cu(I) complex catalysts formed with mixed ligands of multidentate amines and halide ions

An Erratum has been published for this article in J Polym Sci Part A: Polym Chem (2004) 42(19) 5030 . The addition of soluble quaternaryammonium halides (QX) in catalytic amounts takes into solution CuX/pentamethyldiethylenetriamine (PMDETA) complex (X = Cl, Br) in methyl methacrylate (MMA). The soluble catalyst complex provided much better control of the polymerization of MMA at ambient temperature than did the insoluble catalyst formed in the absence of QX, with CuCl/PMDETA/Aliquat® 336 (AQCl) proving to be superior to the CuBr/PMDETA/Bu₄NBr catalyst system. The effect was independent of the size of the quaternaryammonium ion. Also, the presence of Cl in the catalyst–QX combination either as CuCl or as QCl was enough to give much better control than that provided by a wholly Br‐based system. Among the various initiators used, that is, ethyl 2‐bromoisobutyrate (EBiB), methyl 2‐bromopropionate (MBP), 1‐phenylethyl bromide (PEBr), and p‐toluenesulfonyl chloride (pTsCl), only EBiB gave a satisfactory result. With MBP and PEBr the initiation was slower than the propagation, whereas with pTsCl the initiation was very fast, so that instantaneous termination occurred. The living nature of the polymers was shown by block copolymer preparation. It has been suggested that some of the added halide ions entered into the coordination spheres of Cu(I) and Cu(II), leading to their improved solubility and stronger deactivation by the Cu(II) complex. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4132–4142, 2004     

Synthesis of poly(methyl methacrylate) in a pyridine solution by atom transfer radical polymerization

Pyridine was used as a solvent for the atom transfer radical polymerization (ATRP) of methyl methacrylate. The homopolymerizations were carried out with methyl 2‐halopropionate (MeXPr, where X was Cl or Br) as an initiator, copper halide (CuX) as a catalyst, and 2,2′‐bipyridine as a ligand from 80 to 120 °C. The mixed halogen system methyl 2‐bromopropionate/copper chloride was also used. For all the initiator systems used, the polymerization reaction showed linear first‐order rate plots, a linear increase in the number‐average molecular weight with conversion, and relatively low polydispersities. In addition, the dependence of the polymerization rate on the temperature is presented. These data are compared with those obtained in bulk, demonstrating the effectiveness of this solvent for this monomer in ATRP. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3443–3450, 2001     

Synthesis of well‐defined syndiotactic poly(methyl methacrylate) with low‐temperature atom transfer radical polymerization in fluoroalcohol

The copper‐mediated atom transfer radical polymerization of methyl methacrylate (MMA) in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) was studied to simultaneously control the molecular weight and tacticity. The polymerization using tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) as a ligand was performed even at ?78°C with a number‐average molecular weight (M_n) of 13,400 and a polydispersity (weight‐average molecular weight/number‐average molecular weight) of 1.31, although the measured M_n's were much higher than the theoretical ones. The addition of copper(II) bromide (CuBr₂) apparently affected the early stage of the polymerization; that is, the polymerization could proceed in a controlled manner under the condition of [MMA]₀/[methyl α‐bromoisobutyrate]₀/[CuBr]₀/[CuBr₂]₀/[Me₆TREN]₀ = 200/1/1/0.2/1.2 at ?20°C with an MMA/HFIP ratio of 1/4 (v/v). For the field desorption mass spectrum of Cu^IBr/Me₆TREN in HFIP, there were [Cu(Me₆TREN)Br]⁺ and [Cu(Me₆TREN)OCH(CF₃)₂]⁺, indicating that HFIP should coordinate to the Cu^I/Me₆TREN complex. The syndiotacticity of the obtained poly(methyl methacrylate)s increased with the decreasing polymerization temperature; the racemo content was 84% for ?78°C, 77% for ?30°C, 75% for ?20°C, and 63% for 30°C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1436–1446, 2006     

Luminescent polymeric ruthenium complexes with polystyrene‐b‐poly(methyl methacrylate) macroligands: The sequential activation of initiator sites for blocks generated by parallel polymerization mechanisms

The synthesis of polystyrene‐b‐poly(methyl methacrylate) diblock copolymers with a luminescent ruthenium(II) tris(bipyridine) [Ru(bpy)₃] complex at the block junction is described. The macroligand precursor, polystyrene bipyridine‐poly(methyl methacrylate) [bpy(PS–H)(PMMA)], was synthesized via the atom transfer radical polymerization of styrene and methyl methacrylate from two independent, sequentially activated initiating sites. Both polymerization steps resulted in the growth of blocks with sizes consistent with monomer loading and narrow molecular weight distributions (i.e., polydispersity index < 1.3). Subsequent reactions with ruthenium(II) bis(bipyridine) dichloride [Ru(bpy)₂Cl₂] in the presence of Ag⁺ generated the ruthenium tris(bipyridine)‐centered diblock, which is of interest for the imaging of block copolymer microstructures and for incorporation into new photonic materials. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4250–4255, 2002     

Octafunctional cubic silsesquioxane (CSSQ)/poly(methyl methacrylate) nanocomposites: Synthesis by atom transfer radical polymerization at mild conditions and the influence of CSSQ on nanocomposites

Organic/inorganic hybrid star‐like nanocomposites from two different octafunctional cubic silsesquioxane (CSSQ) nano‐cage cores and poly(methyl methacrylate) (PMMA) were synthesized using atom transfer radical polymerization (ATRP) at mild conditions, in which octafunctional octakis(3‐hydroxypropyldimethylsiloxy)octasilsesquioxane (OHPS) and octa(aminophenyl)silsesquioxane (OAPS) nano‐cages were used as ATRP initiators. The polymerization was carried out at 50 °C in acetonitrile/water mixture. ¹H‐NMR and GPC were employed to characterize the obtained nanocomposites. GPC data revealed that the resulting nanocomposites exhibit unimodal and narrow molecular weight distributions indicating well‐controlled synthesis and well‐defined hybrid nanocomposites with star architecture. The influence of CSSQ nano‐cages on the thermal property of nanocomposites was investigated using differential scanning calorimetry and thermal gravimetric analysis (TGA). It was observed that the nanocomposites exhibit significantly higher glass transition temperature compared with its linear counterpart because of slow relaxation caused by the star‐like architecture. TGA study, however, did not reveal any significant improvement in thermal stability of nanocomposites as compared with linear PMMA. Finally, field emission scanning electron microscopy images of fractured surfaces of nanocomposite sample films showed well dispersed CSSQ nano‐cages in PMMA matrix without phase separation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 766–776, 2008     

Synthesis and Dispersion Characteristics of Multi‐Walled Carbon Nanotube Composites with Poly(methyl methacrylate) Prepared by In‐Situ Bulk Polymerization

Multi‐walled carbon nanotubes (MWNT) purified by acidic solution were processed with PMMA via an in‐situ polymerization. Experimental evidences indicate the role of radical initiator (AIBN) and MWNT, showing increases of polymerization rate and MWNT diameter. Induced radicals on the MWNT by AIBN were found to trigger the grafting of PMMA. Moreover, the solvent cast film showed a better nanoscopic dispersion of MWNT and possibilities of CNT composites in engineering applications.

Fractured surface of multi‐walled carbon nanotube composite with PMMA prepared by in‐situ bulk polymerization.     

Synthesis of halogen-free amino-functionalized polymethyl methacrylate by atom transfer radical polymerization (ATRP)

In order to obtain amino-terminated polymethyl methacrylate (PMMA-NH₂) free of halogen we used the atom transfer radical polymerization (ATRP) to polymerize methyl methacrylate (MMA) in presence of an initiator containing an alkyl bromide unit and a protected amine functional group. The use of CuBr / N,N,N′,N′′,N′′-pentamethyldiethylenetriamine (PMDETA) as co-catalyst system results in a polymer free of halogen due to hydrogen transfer from PMDETA to the growing polymer chain. However, side reactions occur affecting the typically “living” character of the ATRP. The measured molecular weights are consistently higher than the theoretical ones and the molecular weight distributions are relatively broad.     

Block copolymers of thiophene-capped poly(methyl methacrylate) with pyrrole

Poly(methyl methacrylate) with a thiophene end group having narrow polydispersity was prepared by the Atom Transfer Radical Polymerization (ATRP) technique. Subsequently, electrically conducting block copolymers of thiophene-capped poly(methyl methacrylate) with pyrrole were synthesized by using p-toluene sulfonic acid and sodium dodecyl sulfate as the supporting electrolytes via constant potential electrolysis. Characterization of the block copolymers were performed by CV, FTIR, SEM, TGA, and DSC analyses. Electrical conductivities were evaluated by the four-probe technique. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4218–4225, 1999     

Synthesis of densely branched poly(methyl methacrylate)s via ATR copolymerization of methyl methacrylate and ethylene glycol dimethacrylate

Densely branched poly(methyl methacrylate)s have been synthesized by copolymerization of methyl methacrylate (MMA) and ethylene glycol dimethacrylate (EGDMA) using atom transfer free radical polymerization (ATRP). By employing the phenyl and benzyl esters of 2-bromo-2-methylpropionic acid as the initiators with 2,2-bipyridyl and Cu(I)Cl it has been possible to use high field ¹H nuclear magnetic resonance spectroscopy to evaluate in some detail the composition and structure of the branched PMMAs obtained. Parallel molar mass size exclusion chromatographic analysis using a multi-angle light scattering detector with a refractive index detector (MALS/SEC) has allowed the branched architecture of the products to be confirmed. Rather remarkably, high yields of branched PMMAs can be obtained without crosslinking using MMA/EGDMA molar feed ratios of up to 5/1 by appropriate adjustment of the molar feed of initiator. In particular by maintaining the EGDMA/initiator molar feed ratio ∼1/1 fully soluble products can be obtained that are densely branched since this feed ratio ensures that on average each living primary chain initiated contains on average only one branching EGDMA segment. As might be expected this controlled free radical process offers better control in the synthesis of branched polymer than the corresponding system we have reported using conventional free radical polymerization, and unlike the latter which requires the use of a chain transfer agent, the ATRP system requires no additional chain regulating component. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2375–2386, 2007     

High Molecular Weight Poly(butyl methacrylate) via ATRP Miniemulsions

Summary: The reverse atom transfer radical polymerization of butyl methacrylate in miniemulsion, initiated with the redox pair hydrogen peroxide/ascorbic acid and mediated with copper(II) bromide tris[2-di(2-ethylhexyl acrylate)aminoethyl]amine is capable of producing well-controlled high-molecular weight poly(butyl methacrylate).     

One‐step synthesis of hyperbranched polyethylene macroinitiator and its block copolymers with methyl methacrylate or styrene via ATRP

Block copolymers of hyperbranched polyethylene (PE) and linear polystyrene (PS) or poly(methyl methacrylate) (PMMA) were synthesized via atom transfer radical polymerization (ATRP) with hyperbranched PE macroinitiators. The PE macroinitiators were synthesized through a “living” polymerization of ethylene catalyzed with a Pd‐diimine catalyst and end‐capped with 4‐chloromethyl styrene as a chain quenching agent in one step. The macroinitiator and block copolymer samples were characterized by gel permeation chromatography, ¹H and ¹³C NMR, and differential scanning calorimetry. The hyperbranched PE chains had narrow molecular weight distribution and contained a single terminal benzyl chloride per chain. Both hyperbranched PE and linear PS or PMMA blocks had well‐controlled molecular weights. Slow initiation was observed in ATRP because of steric effect of hyperbranched structures, resulting in slightly broad polydispersity index in the block copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3024–3032, 2010     

Poly(tetrafluoroethylene) Film Surface Functionalization with 2‐Bromoisobutyryl Bromide as Initiator for Surface‐Initiated Atom‐Transfer Radical Polymerization

A PTFE film surface was modified using a combined plasma/ozone‐activated process. The modified PTFE film was further reacted with 2‐bromoisobutyryl bromide to incorporate ATRP initiators in the film surface. Surface‐initiated ATRP on PTFE films was performed using sodium styrene sulfate as a monomer. The poly(sodium styrene sulfate) chain length grafted onto PTFE film surfaces increased with increasing reaction time. Analysis using X‐ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy and a contact angle analyzer gave evidence of the success of the PTFE surface modifications.

     

Synthesis of Polystyrene and Polystyrene/Poly(methyl methacrylate) Nanoparticles

Summary: Polystyrene nanosize particles have been synthesized by a differential microemulsion polymerization process involving the use of a small amount of poly(methyl methacrylate) as the seeds. Sodium dodecyl sulfate and ammonium persulfate were used as the surfactant and initiator, respectively. The effects of various reaction conditions on the particle size have been investigated. Particle sizes of less than 20 nm have been achieved at milder conditions than those previously reported in the literature.

An HRTEM image of PS/PMMA nanoparticles.