Coherent recombination of laser beams with interferometrical phase control

A HeNe laser beam is split into four component beams which are subsequently transmitted through four polarization-preserving monomode fibres. At the end of the fibres the emerging beams are coherently recombined in pairs in two steps using inverse beamsplitter cubes. The unavoidable phase differences within each pair of beams, which are caused by temperature and pressure fluctuations in the fibre environment, are detected interferometrically at the fibre ends. Using homodyne techniques, these differences are measured and compensated for by lengthening the optical path in the individual fibres with piezo-electric stretching. With appropriate adjustment of the relative phases the emerging beams can be superimposed onto each other so as to re-form one single coherent beam.     

Transmission properties of all-silica fibres for high-power Nd:YAG lasers

The transmission properties of two different types of all-silica fibres, step index and graded-index fibres, are investigated using a multimode high-power cw Nd:YAG rod laser. The reflections from the fibre surface back into the laser cavity affect the laser power and the beam parameters, waist diameter and divergence. A set-up for simultaneously measuring these values in front of and behind a fibre is presented. The maximum laser power transmitted by fibres is dependent upon the beam parameters, the fibre design and the surface conditions. An upper limit for the maximum divergence which can be coupled into a fibre with a certain numerical aperture without loss is given. The beam parameters behind the fibre, related to the input parameters, are presented.     

Design and fabrication of Fourier plane diffractive optical elements for high-power fibre-coupling applications

In industrial processes using fibre beam delivery of high peak power laser light, diffractive optical elements are a very useful and flexible tool in maximising the amount of light reaching the work surface. This is due to the ability of diffractive optical elements to accurately couple light into multiple fibres, while conditioning the light in order to maximise the throughput for each fibre. We discuss the design techniques for diffractive optical elements and the application of these techniques to fibre-coupling problems. The flexibility of diffractive optical elements is demonstrated by their application to several fibre-coupling geometries, including a fibre bundle, a linear array of fibres, and a rotationally symmetric fibre connector. The diffraction efficiencies for the elements approach 90% with uniformity errors of less than 5%.     

Fundamental studies on laser radiation therapy: dispersion of a laser beam passing through optical fibres

For laser internal therapy in medical applications, optical fibres are required to propagate the laser beam. The far-field pattern of the laser beam at the exit face of the optical fibre is studied using a multimode step-index fibre and a graded index Selfoc fibre. The degree of dispersion, or the output angular distribution, of the beam passing through the Selfoc fibre is much smaller than that passing through the multimode step-index fibre. Consequently, the energy density in the far-field pattern of the beam passing through the Selfoc fibre is very much larger than that for the beam passing through the multimode step-index fibre. It is concluded that the Selfoc fibre is more effective in laser internal therapy.     

Linearly polarised three-colour lasing emission from an evanescent wave pumped and gain coupled fibre laser

A novel Whispering--Gallery--Mode (WGM) fibre laser, emitting linearly polarised three-colour light, is demonstrated by pumping and gain coupling with evanescent waves. The pump light is longitudinally coupled into a bare optical fibre immersed in a dye solution of lower refractive index. The dye molecules around the bare fibre are excited by the evanescent waves of pump light when they propagate along the fibre in a total internal reflection. When the pump beam within the fibre is a meridian beam, the WGM lasing emission from the fibre laser is a linearly polarised transverse electric wave, while it is a mixed wave of the linearly polarised transverse electric and magnetic waves if the pump beam is a skew beam within the fibre. Because the excited molecules are located within the evanescent field of WGM, a good spatial overlap between the dye gain and the evanescent field leads to a high pumping efficiency and a longer gain distance along the fibre. Once the bare fibre is inserted into three glass capillaries filled with Rhodamine 6G, 610 and 640 dye solutions, respectively, WGM laser oscillations at the wavelengths of 567--575, 605--614 and 656--666~nm occur simultaneously, and a linearly polarised three-colour lasing emission is achieved in a single optical fibre.     

Propagation of Single-Mode Fibre Laser Beams through an Optical ABCD System with Circular Aperture at the Fibre Output End

Based on the expansion expression of the fundamental mode of a single-mode fibre in terms of Laguerr-Gauss modes, the propagation of a beam of a weakly guiding fibre laser through an opticM ABCD system with a circular aperture at the fibre end is studied. The results show that there is much difference between the propagation of the laser beam described by the expansion expression and by the Gaussian mode approximation. The depth of focus of the laser beam is longer than that of the Gaussian modes.     

Phase-Locked Fibre Array for Coherent Combination and Atmosphere Aberration Compensation

We report a fibre amplifier array that not only achieves coherent beam combination by compensation of phase noises of fibre amplifier, but also accomplishes correction of atmosphere aberration. It is of master-oscillatormultiple-amplifier （MOPA） configuration, which can be phase-locked by the multidither principle or heterodyne detection principle. First laboratory experiments of atmosphere aberration compensation of a three-element fibre amplifier array are reported. The atmosphere aberration is created by a phase screen in the experiment. The phase changes of the beam, which are introduced by the fibre amplifier and the phase screen, are both detected by the heterodyne detection method. Phase modulators are controlled to compensate for the phase in the three paths. No matter whether there is a phase screen producing atmosphere aberration or not, the dim dynamic interference fringes in the far field turn to a clear and stable pattern, and the peak intensity is maximized. It is indicated that the fibre amplifier array is phase-locked, and coherent combination of the three beams is achieved. It can be used not only to obtain high power fibre laser array but also in laser space communication.     

A simple fibre Fabry-Pérot sensor

A simple fibre Fabry-Pérot sensor is described in which the uncoated cleaved ends of a lenght of single mode fibre are employed as the mirror surfaces to produce high visibility near perfect cosine-squared fringes in the back-reflected light. The experimentally observed signal-to-noise performance of the interferometer illuminated by a HeNe gas laser and a semiconductor diode laser is reported. In an accelerometer configuration the device displayed a below resonance sensitivity of ≥200 rad g^-1.     

Light scattering properties of a rough-ended optical fibre

Uniform wide-angle irradiation of a laser beam is achieved by roughening chemically the output end of an optical fibre. The angular distribution of the scattered light is analysed experimentally as a function of the incident angle of the laser beam into the input end of the fibre and the length of the rough core surface at its output end.     

Coherent beam combining of hybrid phase control in master oscillator-power amplifier configuration

A novel scalable architecture for coherent beam combining with hybrid phase control involving passive phasing and active phasing in master oscillator-power amplifier configuration is presented. Wide-linewidth mutually injected passive phasing fibre laser arrays serve as master oscillators for the power amplifiers, and the active phasing using stochastic parallel gradient descent algorithm is induced. Wide-linewidth seed laser can suppress the stimulated Brillouin scattering effectively and improve the output power of the fibre laser amplifier, while hybrid phase control provides a robust way for in-phase mode coherent beam combining simultaneously. Experiment is performed by active phasing fibre laser amplifiers with passive phasing fibre ring laser array seed lasers. Power encircled in the main-lobe increases1.57 times and long-exposure fringe contrast is obtained to be 78% when the system evolves from passive phasing to hybrid phasing.     

Quasi-Gaussian beam from a multicore fibre laser by phase locking of supermodes

We present a new cavity design for controlling the spatial quality of the beam delivered by a fibre laser including a multicore fibre. A quasi Gaussian profile is produced at the 7-core fibre output involving self-imaging effects in the multicore fibre and spatial filtering. Numerical and experimental investigations analyse the spatial and spectral characteristics of the multicore fibre laser.     

Coherent Beam Combination of Two Polarization Maintaining Ytterbium Fibre Amplifiers

We investigate coherent beam combination of fibre laser beams by phase locking. Phase noise of a polarization maintaining ytterbium fibre amplifier is inspected with a fibre interferometer. In a feed back control loop, two fibre polarization maintaining ytterbium amplifiers are phase locked and coherent combined when the phase noise is properly controlled by a LiNO3 phase modulator.     

通过外加应变于高双折射环镜实现掺铒光纤激光器的输出功率控制

本文提出一种基于外加应力于高双折射环镜的输出功率可调控的掺铒光纤激光器新颖结构。通过将高双折射光纤环镜中的部分双折射光纤粘贴于一个等强度梁的中性面上，在梁尾端作用不同的应力，由于双折射光纤的长度和双折射的改变可使环镜的反射率从0.8%变化到100%。以该环镜作为线形腔光纤激光器的输出腔镜，实现了动态范围达33dB的输出功率可调控的掺铒光纤激光器。该激光器不仅具有结构简单、成本低廉的优点，而且利用该机理可以很容易的找出最优腔镜反射率，从而使线形腔光纤激光器的输出性能实现最优化。     

High-power Yb-doped continuous-wave and pulsed fibre lasers

High-power laser generation using Yb-doped double-clad fibres with conversion efficiencies in excess of 80% have attracted much attention during the last decade due to their inherent advantages in terms of very high efficiency, no misalignment due to in-built intracore fibre Bragg gratings, low thermal problems due to large surface to volume ratio, diffraction-limited beam quality, compactness, reliability and fibre-optic beam delivery. Yb-doped fibres can also provide a wide emission band from ～1010 nm to ～1170 nm, which makes it a versatile laser medium to realize continuous-wave (CW), Q-switched short pulse, and mode-locked ultrashort pulse generation for various applications. In this article, a review of Yb-doped CW and pulsed fibre lasers along with our study on self-pulsing dynamics in CW fibre lasers to find its role in high-power fibre laser development and the physical mechanisms involved in its generation has been described. A study on the generation of high-power CW fibre laser of 165 W output power and generation of high peak power nanosecond pulses from acousto-optic Q-switched fibre laser has also been presented.     

Characteristics of Er and Er-Yb-Cr doped phosphate microsphere fibre lasers

In this paper both Er and Er-Yb-Cr doped phosphate microspheres have been successfully created through precise melting of the ends of fibre tapers, drawn, respectively, from Er and Er-Yb-Cr doped phosphate glasses. When coupled with a fibre taper, a microsphere fibre laser cavity can thus be configured creating a system pumped by a 980 nm laser diode and using an optical spectrum analyzer to monitor the spectral characteristics of the laser output. The performance and characteristics of the Er and Er-Yb-Cr microsphere lasers thus created are discussed in detail and cross-compared in this paper. Both lasers have shown low-threshold in terms of the pump power and the laser output wavelengths and a close investigation of the system has shown that the output power and laser stability are closely related to the size of the microsphere, the pump power and the microsphere material composition.     

偏斜光线抽运下的回音壁模式光纤激光辐射特性

研究了偏斜光线抽运下的回音壁模式光纤激光辐射特性.实验发现,在抽运光以偏斜光线方式沿光纤的近轴向抽运时,回音壁模式的光纤激光辐射中,既存在光电矢量和光纤径向垂直的横电波(TE),也存在光电矢量和光纤径向平行的横磁波(TM);随增益包层染料溶液折射率的增加,径向模式数和角模式数相同的TE波和TM波之间的波长差单调减小,回音壁模式激光辐射的中心波长向短波方向移动,辐射的波长范围变窄.用回音壁模式激光的辐射理论结合激光染料的四能级模型,满意地解释了实验结果.     

Random distributed feedback fibre lasers

The concept of random lasers exploiting multiple scattering of photons in an amplifying disordered medium in order to generate coherent light without a traditional laser resonator has attracted a great deal of attention in recent years. This research area lies at the interface of the fundamental theory of disordered systems and laser science. The idea was originally proposed in the context of astrophysics in the 1960s by V.S. Letokhov, who studied scattering with “negative absorption” of the interstellar molecular clouds. Research on random lasers has since developed into a mature experimental and theoretical field. A simple design of such lasers would be promising for potential applications. However, in traditional random lasers the properties of the output radiation are typically characterized by complex features in the spatial, spectral and time domains, making them less attractive than standard laser systems in terms of practical applications. Recently, an interesting and novel type of one-dimensional random laser that operates in a conventional telecommunication fibre without any pre-designed resonator mirrors–random distributed feedback fibre laser–was demonstrated. The positive feedback required for laser generation in random fibre lasers is provided by the Rayleigh scattering from the inhomogeneities of the refractive index that are naturally present in silica glass. In the proposed laser concept, the randomly backscattered light is amplified through the Raman effect, providing distributed gain over distances up to 100 km. Although an effective reflection due to the Rayleigh scattering is extremely small (∼0.1%), the lasing threshold may be exceeded when a sufficiently large distributed Raman gain is provided. Such a random distributed feedback fibre laser has a number of interesting and attractive features. The fibre waveguide geometry provides transverse confinement, and effectively one-dimensional random distributed feedback leads to the generation of a stationary near-Gaussian beam with a narrow spectrum. A random distributed feedback fibre laser has efficiency and performance that are comparable to and even exceed those of similar conventional fibre lasers. The key features of the generated radiation of random distributed feedback fibre lasers include: a stationary narrow-band continuous modeless spectrum that is free of mode competition, nonlinear power broadening, and an output beam with a Gaussian profile in the fundamental transverse mode (generated both in single mode and multi-mode fibres).     

Stochastic homogenization of the laser intensity to improve the irradiation uniformity of capsules directly driven by thousands laser beams

Illumination uniformity of a spherical capsule directly driven by laser beams has been assessed numerically. Laser facilities characterized by N _D  = 12, 20, 24, 32, 48 and 60 directions of irradiation with associated a single laser beam or a bundle of N _B laser beams have been considered. The laser beam intensity profile is assumed super-Gaussian and the calculations take into account beam imperfections as power imbalance and pointing errors. The optimum laser intensity profile, which minimizes the root-mean-square deviation of the capsule illumination, depends on the values of the beam imperfections. Assuming that the N _B beams are statistically independents is found that they provide a stochastic homogenization of the laser intensity associated to the whole bundle, reducing the errors associated to the whole bundle by the factor \hbox{1/N_B^1/21/N_{B}^{1{/}2}} 1 / N B 1 / 2 , which in turn improves the illumination uniformity of the capsule. Moreover, it is found that the uniformity of the irradiation is almost the same for all facilities and only depends on the total number of laser beams N _tot  = N _D  × N _B .     

A telescope illumination system for a wide-field endoscope

Endoscopic illumination systems conduct light down a built-in fibre-optic bundle to illuminate the object. Many modern endoscopes employ wide-field imaging optical systems and therefore require an illuminating beam of large divergence. This is commonly provided by placing a strong diverging lens at the far end of the fibre bundle, but it results in a poor uniformity of illumination in the object space. This paper describes the design of a telescopic illumination system to overcome this problem.