EPR study of the spin dynamics of the (La<Subscript>1−<Emphasis Type="Italic">y</Emphasis></Subscript>Pr<Subscript>y</Subscript>)<Subscript>0.7</Subscript>Ca<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript> system

The EPR of Mn ions in the (La_1?yPr_y)_0.7Ca_0.3MnO₃ system has been studied within a broad range of temperatures (4<T<600 K) and Pr concentrations (0≤y≤1), as well as under isotope substitution of ¹⁸O for ¹⁶O. All compositions were shown to undergo transitions to a magnetically ordered state with decreasing temperature. Magnetic phase diagrams were constructed for systems with different oxygen isotopes. The diagrams include paramagnetic, ferromagnetic, and antiferromagnetic regions. In the paramagnetic region, at temperatures not too close to the phase transition points, the Mn ion linewidth ΔH _pp (T) is related to the magnetic susceptibility χ(T) through the relation ΔH _pp (T) = [χ₀/χ(T)]ΔH _pp (∞) + ΔH₀, where ΔH _pp (∞) is the width of the exchange-narrowed line in the high-temperature approximation, χ₀ ∝ 1/T is the susceptibility of noninteracting ions, and ΔH₀ is the residual width originating from the sample porosity and resonance-field scatter in unoriented grains of a powder sample. An analysis of the data on ΔH _pp (∞), ΔH₀, and χ(T) made it possible to estimate the symmetric and antisymmetric exchange interaction of Mn ions and of the noncubic crystal-field component of the oxygen ions. These parameters were found to be independent of the oxygen isotope species to within experimental error.     

Special features of the structure and properties of La<Subscript>0.6</Subscript>Sr<Subscript>0.2</Subscript>Mn<Subscript>1.2−<Emphasis Type="Italic">y</Emphasis></Subscript>Cr<Subscript>y</Subscript>O<Subscript>3</Subscript> magnetoresisitive ceramics

Atomic order and magnetoresistive parameters are studied in La_0.6Sr_0.2Mn_1.2?yCr_yO₃ ceramics, in which Cr substituted for the above stoichiometric Mn content serves to enhance cluster formation in a solid solution. It is shown that in a range of 0.05<y<0.1, La_0.6Sr_0.2Mn_1.2?yCr_yO₃ experiences a phase transition from a partially disordered solid solution with a rhombohedral lattice \((R\bar 3c)\), in the form of planes possessing a long-range order and clusters of mesoscopic order, to a chemically microstratified solid solution, in the form of planes of an orthorhombic (Pnma) crystal lattice having a matrix structure and mesoscopic formations (clusters) coherently combined with a matrix of plane fragments peculiar to oxides of γ-MnO₂ type or, at y>0.1, of Cr₂O₃ type. It is shown that the structural phase transition is accompanied by maximum changes of the magnetoresistive parameters in the same range of Cr concentrations, i.e., 0.05<y<0.10.     

Magnetic phase transitions in the iron-doped Pr<Subscript>0.7</Subscript>Ca<Subscript>0.3</Subscript>Mn<Subscript>1−<Emphasis Type="Italic">y</Emphasis></Subscript>Fe<Subscript>y</Subscript>O<Subscript>3</Subscript> manganites at high pressures

The atomic and magnetic structures of the iron-doped Pr_0.7Ca_0.3Mn_1?yFe_yO₃ manganites (y=0, 0.1) have been studied at high pressures of up to 4 GPa in the temperature range 16–300 K. At normal pressure, Pr_0.7Ca_0.3MnO₃ undergoes a phase transition from the paramagnetic to an antiferromagnetic (AFM) state of the pseudo-CE type and Pr_0.7Ca_0.3Mn_0.9Fe_0.1O₃ undergoes a phase transition from the paramagnetic to the ferromagnetic state at low temperatures. Partial substitution of Mn atoms by Fe brings about a noticeable decrease in the average magnetic moment per atom. A new A-type AFM state was observed to form in Pr_0.7Ca_0.3MnO₃ at a pressure P≈2.2 GPa and in Pr_0.7Ca_0.3Mn_0.9Fe_0.1O₃ at 2.7 GPa. This phenomenon may originate from the anisotropy in the compressibility, which causes uniaxial contraction of the oxygen octahedra MnO₆ in the structure and provides favorable conditions for the formation of an A-type AFM state. The structural parameters obtained were used to calculate the pressure dependence of bandwidth in the compounds under study.     

O<Subscript>2</Subscript> photodesorption from AuO<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack> and Au<Subscript>2</Subscript>O<Stack><Subscript>2</Subscript><Superscript>−</Superscript></Stack>

Using time-resolved photoelectron spectroscopy, the decay channels of AuO₂⁻ and Au₂O₂⁻ following photoexcitation with 3.1-eV photons have been studied. For AuO₂⁻, a state with a rather long lifetime of 30 ps has been identified. Its decay path could not be determined but photodesorption can be excluded. For Au₂O₂⁻, the spectra indicate O₂ desorption after 3.1-eV photoexcitation on a time scale of 1 ps. While comparing these results on Au _n O₂⁻ with analogous data on Ag _n O₂⁻ clusters, a discernible pattern emerges: for dissociatively bound O₂(AuO₂⁻, Ag₃O₂⁻), there are long-living excited states which do not decay by oxygen desorption, while for molecular chemisorption (Au₂O₂⁻, Ag₂O₂⁻, Ag₄O₂⁻, Ag₈O₂⁻), the 3.1-eV photoexcitation triggers fast O₂ desorption with a high quantum yield.     

Magnetic states of iron ions in Bi<Subscript>0.75</Subscript>Si<Subscript>0.25</Subscript>FeO<Subscript>3 − <Emphasis Type="Italic">y</Emphasis></Subscript> perovskites

Hyperfine interactions on ⁵⁷Fe nuclei in cubic perovskite Bi_0.75Sr_0.25FeO_{3 ? y} in the temperature range 87–700 K are studied using Mössbauer spectroscopy. The temperature of the magnetic phase transition (the Neel point T _N ) of bismuth ferrite is T _N = 670(3) K. Below T _N , the experimental spectra demonstrate a partially resolved magnetic hyperfine structure with broadened lines, which is well described by superposition of four sextets. The values of the hyperfine magnetic field B and the isomer shift δ at room temperature initiated that all iron ions are in the trivalent state. Here, three sextets with the equal isomer shifts (δ₁ ≈ δ₂ ≈ δ₃ = 0.38 mm/s correspond to the iron ions in the octahedral oxygen environment; in the fourth sextet, the iron ions are in the square-pyramidal environment (δ₃ = 0.25 mm/s).     

Internal friction and magnetoelectric response in two-layer composites Tb<Subscript>0.12</Subscript>Dy<Subscript>0.2</Subscript>Fe<Subscript>0.68</Subscript>–PbZr<Subscript>0.53</Subscript>Ti<Subscript>0.47</Subscript>O<Subscript>3</Subscript>

The inverse magnetoelectric effect and internal friction in two-layer composites based on ferromagnetic Tb_0.12Dy_0.2Fe_0.68 and piezoelectric PbZr_0.53Ti_0.47O₃ are studied in an ac electrical field in the frequency range of 52–213 kHz at temperatures of 293 to 400 K. A correlation is found between the internal friction and the efficiency of the inverse magnetoelectric transformation at resonant frequencies.     

μSR study of Eu<Subscript>0.8</Subscript>Ce<Subscript>0.2</Subscript>Mn<Subscript>2</Subscript>O<Subscript>5</Subscript> and EuMn<Subscript>2</Subscript>O<Subscript>5</Subscript> multiferroics

A comparative μSR study of ceramic samples of the EuMn₂O₅ and Eu_0.8Ce_0.2Mn₂O₅ multiferroics is performed in the temperature range from 15 to 300 K. It is found that the Ce doping of the EuMn₂O₅ sample slightly reduces the temperature of the magnetic phase transition from T _N = 45 K for the EuMn₂O₅ sample to T _N = 42.5 K for the Eu_0.8Ce_0.2Mn₂O₅ sample. Below the temperature T _N for both samples, there are two types of localization of a thermalized muon with different temperature dependences of the precession frequency of the magnetic moment of the muon in an internal magnetic field. The higher frequency in both samples refers to the initial antiferromagnetic matrix. The behavior of this frequency in Eu_0.8Ce_0.2Mn₂O₅ follows the Curie–Weiss law with the exponent β = 0.29 ± 0.02, which differs from the value β = 0.39 standard for 3D Heisenberg magnetics and is observed in EuMn₂O₅, because of the strong frustration of the doped sample. The temperature-independent low frequency is due to the presence of Mn³⁺–Mn⁴⁺ ferromagnetic pairs located along the b axis of the antiferromagnetic matrix and in the regions of phase separation, which contain such ion pairs and e _g electrons recharging them. In both samples, polarization losses are the same (about 20%) and are associated with the formation of Mn⁴⁺–Mn⁴⁺ + Mu complexes near Mn³⁺–Mn⁴⁺ ferromagnetic pairs. In the temperature interval from 25 to 45 K, the separation of the Eu_0.8Ce_0.2Mn₂O₅ structure into two fractions where the relaxation rates of polarization of muons differ by an order of magnitude is revealed. This effect is due to a change in the state of regions of phase separation (1D superlattices) at the indicated temperatures. Such effect in EuMn₂O₅ is significantly weaker.     

High-Temperature Heat Capacity of Zn<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript>–Cu<Subscript>2</Subscript>V<Subscript>2</Subscript>O<Subscript>7</Subscript> Solid Solutions

Differential scanning calorimetry has been used to study the influence of temperature on the heat capacity of synthesized vanadates Zn₂V₂O₇, (Cu_0.56Zn_1.44)V₂O₇, and (Cu_1.0Zn_1.0)V₂O₇. It is found that dependences C_p = f(T) have extremes. The thermodynamic properties of Zn₂V₂O₇ have been determined.     

Colossal room-temperature magnetoresistance in thin La<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Ag<Subscript>y</Subscript>MnO<Subscript>3</Subscript> epitaxial films

The first thin La_1?xAg_yMnO₃ epitaxial films (_y ≤ x) were grown on SrTiO₃ (110) substrates with silver present in the ionized state (Ag⁺) only. The Curie temperatures T_C of the compositions with x = y = 0.05, x = y = 0.1, and x = 0.3 and y = 0.27 crystallizing in the hexagonal structure \(R\bar 3c\) above or close to room temperature. The temperature dependences of electrical resistivity ρ and of magnetoresistance ¦Δρ/ρ/¦ = ¦(ρ_H ? ρ _H = 0)/ρ_H=0¦ pass through maxima near T_C, with the magnetoresistance being negative and reaching colossal values of ～7–20% in a magnetic field H = 8.2 kOe not only at T_C but also at room temperature. The magnetic moment per formula unit as derived from the saturation magnetization at T = 5 K is substantially smaller than expected for complete ferromagnetic ordering. The magnetization in fields of up to 6 kOe depends on the actual sample cooling conditions, and the hysteresis loop of a field-cooled sample is displaced along the H axis by ΔH. The above properties can be accounted for by the fact that the films are in a two-phase magnetic (ferromagnetic-antiferromagnetic) state induced by strong s-d exchange. The maximum value of Δ H was used to calculate the energy of exchange coupling between the ferromagnetic and antiferromagnetic parts of a sample.     

Synthesis and characterization of Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>·LiMn<Subscript>0.33</Subscript>Fe<Subscript>0.67</Subscript>PO<Subscript>4</Subscript>/C cathode materials

A new polyanionic cathode material, Li₃V₂(PO₄)₃·LiMn_0.33Fe_0.67PO₄/C for lithium-ion batteries, was synthesized using a sol-gel method and with N,N-dimethyl formamide as a dispersion agent. The analysis of electron transmission spectroscopy and X-ray diffraction revealed that the composite contained two phases. The material has high crystallinity with a grain size of 20–50 nm. The valence states of Mn, V, and Fe in the composite were analyzed by X-ray photoelectron spectroscopy. The electrochemical kinetics in Li₃V₂(PO₄)₃ is effectively enhanced by the incorporation of LiMnPO₄ and LiFePO₄, via structure modification and reduced Li diffusion length. The Li₃V₂(PO₄)₃·LiMn_0.33Fe_0.67PO₄/C materials displayed high rate capacity and steady cycle performance with discharge capacity remained 148 mAh g^?1 after 50 cycles at the rate of 0.2C. In particular, the composite exhibited excellent reversible capacities, with the values of 157, 134, 120, 102, and 94 mAh g^?1 at charge/discharge 0.2, 0.5, 1, 2, and 5C rates, respectively.     

Magnetic and magnetoresistive properties of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–Sr<Subscript>2</Subscript>FeMoO<Subscript>6–δ</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoheterostructures

A method has been developed for fabricating nanoporous matrices based on anodic aluminum oxide for the deposition of ferromagnetic nanoparticles in them. The modes of deposition of strontium ferromolybdate thin films prepared by the ion-plasma method have been worked out, and the magnetic and magnetoresistive properties, structure, and composition of the films have been investigated. It has been revealed that the microstructure and properties of the strontium ferromolybdate films deposited by ionplasma sputtering depend on the deposition rate and the temperature of the substrate. Based on the measurement of the electrical resistivity of nanoheterostructures in a magnetic field, it has been found that the magnetoresistance reaches 14% at T = 15 K and B = 8 T, which is due to the manifestation of tunneling magnetoresistance.     

Cluster spin glass and superparamagnetism in RuSr<Subscript>2</Subscript>Eu<Subscript>1.5</Subscript>Ce<Subscript>0.5</Subscript>Cu<Subscript>2</Subscript>O<Subscript>10-</Subscript><Subscript>δ</Subscript>

We investigate in detail the dc magnetization and nonlinear ac susceptibility behavior of the superconducting ferromagnet RuSr₂Eu_1.5Ce_0.5Cu₂O_{10- δ} (Ru1222) to develop a comprehensive understanding of the spin glass and superparamagnetism in this material. The structural properties of the system result in the formation of magnetic (ferromagnetic) clusters of different sizes, shapes and properties. The magnetic clustering of the system leads to observation of various features in dc magnetization and ac susceptibility consistent with superparamagnetism and cluster spin glass states, which can coexist or stand alone, depending on the temperature range considered. Experimental results of magnetic measurements in combination with their analysis have enabled us to explain and distinguish these phenomena, as well as to propose a temperature dependent scenario of the system behavior.     

Preparation and characterization of organic–inorganic hybrid compound [N(C<Subscript>4</Subscript>H<Subscript>9</Subscript>)<Subscript>4</Subscript>]<Subscript>2</Subscript>Cu<Subscript>2</Subscript>Cl<Subscript>6</Subscript>

Organic–inorganic hybrid sample [N(C₄H₉)₄]₂Cu₂Cl₆ was prepared via the reaction between copper chloride and tetrabutylammonium chloride. The compound was characterized by X-ray powder diffraction, IR, Raman, differential scanning calorimetry (DSC), DTA-TGA analysis and electrical impedance spectroscopy. DSC studies indicate a presence of one-phase transition at 343 K. The complex impedance of compound [N(C₄H₉)₄]₂Cu₂Cl₆ have been investigated in temperature and frequency ranges 300–380 K and 200 Hz–5 MHz, respectively. The Z′ and Z″ versus frequency plots are well fitted to an equivalent circuit model. The circuits consist of the parallel combination of bulk resistance R _p and constant phase elements CPE. The frequency dependence of the conductivity is interpreted in term of Jonscher's law: s(w) = s_dc + Awⁿ \sigma (\omega ){ } = {\sigma_{\rm{dc}}} + { }A{\omega^n} . The conductivity follows the Arrhenius relation. The variation of the value of these elements with temperatures confirmed the availability of the phase transition at 343 K detected by DSC and electrical measurements.     

Structural properties of composite cathode material LiFePO<Subscript>4</Subscript>–Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

Composite cathode material LiFePO₄–Li₃V₂(PO₄)₃ is synthesized through a chemical reduction and lithiation using FeVO₄·xH₂O as both iron and vanadium sources. The structural properties of LiFePO₄–Li₃V₂(PO₄)₃ are investigated. X-ray diffraction results show the composite material containing olivine type LiFePO₄ and monoclinic Li₃V₂(PO₄)₃ phases. High-resolution transmission electron microscopy and energy-dispersive X-ray spectrometry results indicate that mutual doping effects take place between the LiFePO₄ and Li₃V₂(PO₄)₃ particles with V³⁺ doping the LiFePO₄ while Fe²⁺ dopes the Li₃V₂(PO₄)₃. LiFePO₄–Li₃V₂(PO₄)₃ nanocomposites are formed in the carbon webs. There is no structural compatibility between monoclinic (Li₃V₂(PO₄)₃) and olivine (LiFePO₄) domains in composite material LiFePO₄–Li₃V₂(PO₄)₃.     

Electrical switching in the MoO<Subscript>3</Subscript>–WO<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> and MoO<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

High field electrical switching on blown films of MoO₃(60%)–P₂O₅(40%), MoO₃(50%)–WO₃(10%)–P₂O₅(40%), and MoO₃(45%)–WO₃(15%)–P₂O₅(40%) having different thicknesses was studied and compared. Switching was observed using two terminal samples. S-type current–voltage characteristic (current-controlled negative resistance—CCNR) with memory was observed in molybdenum–phosphate glasses, but N-type characteristic (voltage-controlled negative resistance—VCNR) with threshold in tungsten–molybdenum–phosphate glasses was observed. The important observation was that with the addition of WO₃ to binary MoO₃–P₂O5 led to a change of I–V characteristic from CCNR with memory to VCNR with threshold. The measurements of density and molar volume showed linear relation between MoO₃ content and density which decreased with the increase of MoO₃ content. The samples’ thickness had no significant effect on threshold voltage. The attained results also indicated that the electrode material had no effect on switching property of devices. The switching behavior of the devices did not show any dependence on the polarity of the applied voltage. In terms of the effect of heat on the switching behavior of molybdenum–phosphate glasses, it was found that threshold voltage decreases with increasing of temperature. Finally, the switching phenomenon was explained by thermal (formation of crystalline filaments) and electronic models.     

Triple correlations in a A<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>B<Subscript>1 − <Emphasis Type="Italic">y</Emphasis></Subscript> solid solution with a planar hexagonal lattice

It is shown that triple correlations in a A _y B_{1 ? y} solid solution with a planar hexagonal lattice are due to the presence of nearest-pair correlations. The admissible range of the triple correlation as a function of the composition of the A _y B_{1 ? y} solid solution and pair correlation value is determined. It is shown that periodically ordered planar hexagonal and square-island nanostructures can be considered as A_1/4□ _3/4 solid solutions with vacant sites □ and sites occupied by nanoparticles A. In this case, the ordered distribution of the nanoparticles over the sites of the planar lattice is caused by the nearest-air correlation that is negative in sign and maximal in absolute value.     

Magnetorefractive effect in (Co<Subscript>50</Subscript>Fe<Subscript>50</Subscript>)<Subscript>x</Subscript>(Al<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript> granular films

The reflectivity spectra and the magnetorefractive effect (MRE) of (Co₅₀Fe₅₀)_x(Al₂O₃)_1?x metal-dielectric granular films (0.07<x<0.52) are analyzed in the IR spectral range λ=2.5–25 µm. It is revealed that the specific features observed in the spectra at λ≈8.5 and 20 µm are associated with the excitation of phonon modes in the dielectric matrix. The magnetorefractive effect in the films is observed below the percolation thresh-old only in p-polarized light and above the percolation threshold for both the p and s polarizations. It is demonstrated that the optical properties of (Co₅₀Fe₅₀)_x(Al₂O₃)_1?x films in the IR spectral range, to a first approximation, can be interpreted in the framework of the effective-medium theory and the magnetorefractive effect can be explained in terms of the modified Hagen-Rubens relation.     

Fractal magnetic microstructure in the (Co<Subscript>41</Subscript>Fe<Subscript>39</Subscript>B<Subscript>20</Subscript>)<Subscript>x</Subscript>(SiO<Subscript>2</Subscript>)<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript> nanocomposite films

Magnetostructural methods are applied to determine the exchange bond percolation limit in (Co₄₁Fe₃₉B₂₀)_x(SiO₂)_1?x nanocomposites (x _c = 0.30 ± 0.02), which separates the phase plane along the metal concentration axis into a superparamagnetic region and a ferromagnetic region. It is shown that, with respect to the singularities of the magnetization up to the magnetization saturation curves, the ferromagnetic region is further subdivided into three regions differing in the character of the spatial propagation of the magnetization ripples or in the magnetic correlation function characteristics. The fractal dimension of the nanocomposite magnetic microstructure near the percolation threshold is determined.     

Superconductivity in Sr<Subscript>0.75</Subscript>Y<Subscript>0.75</Subscript>Ba<Subscript>1.5</Subscript>Cu<Subscript>3</Subscript> O<Subscript>7−<Emphasis Type="Italic">d</Emphasis></Subscript> compounds

The effect of simultaneous Sr substitution at the Ba and Y sites has been studied in the Sr_0.75Y_0.75Ba_1.5Cu₃O_7–dsystem. Attempts to replace 25% Y and 25% Ba have been successful and superconductivity was observed above 78 K for Sr_0.75Y_0.75Ba_1.5Cu₃O_7–d compound with high oxygen content, i.e., O_6.76, and having orthorhombic crystal symmetry. The compound was treated in argon gas at 800°C to reduce the oxygen content and to induce some structural changes. The Sr_0.75Y_0.75Ba_1.5Cu₃O_6.1 compound thus obtained has tetragonal symmetry and low oxygen content, O_6.1. It has also shown superconductivity at 28 K. The paper presents a careful comparison of the structural and electrical properties and infrared absorbance spectra of the two compounds with the same metallic composition, Sr_0.75Y_0.75Ba_1.5Cu₃, but with different oxygen content and crystal symmetry. The study clearly establishes the occurrence of superconductivity in tetragonal Sr-substituted (both at Y and Ba sites in) YBCO.