Characterization and application of an electrode modified by mechanically immobilized copper hexacyanoferrate

A newly modified electrode was prepared by mechanical immobilization of copper hexacyanoferrate (CuHCF) on a graphite electrode. The modified electrode was characterized by cyclic voltammetric experiments. The effect of different background electrolytes, pHs and scan rates on the electrochemical behaviour of the electrode has been evaluated. In NH₄Cl two reversible redox peaks were observed. The first redox peak corresponding to Cu⁺/Cu²⁺ is observed only in this medium. The second redox peak corresponds to the Fe(CN)₆ ^4–/Fe(CN)₆ ^3– couple. Both anodic peaks were used for catalytic oxidation of ascorbic acid. As the anodic current for catalytic oxidation was proportional to the amount of ascorbic acid, an analytical method was developed for the determination of ascorbic acid in commercial samples.     

Evaluation of a mechanically immobilized nickel hexacyanoferrate electrode as an amperometric sensor for thiosulfate determination

A nickel hexacyanoferrate modified electrode was constructed by mechanical immobilization. A reversible peak with midpoint potential of 0.38 V was observed in cyclic voltammetry with 0.1 M NaNO₃. Electrocatalytic oxidation of thiosulfate was effective on the modified electrode at a significantly reduced overpotential of 0.5 V and at broad pH range. The modified electrode can be used for the determination of thiosulfate in the concentration range of 7.0 × 10^–4 to 5.6 × 10^–3 M. It has been used for the amperometric determination of thiosulfate in photographic effluents. The results obtained were in good agreement with those obtained by other methods.     

Evaluation of a mechanically immobilized nickel hexacyanoferrate electrode as an amperometric sensor for thiosulfate determination

A nickel hexacyanoferrate modified electrode was constructed by mechanical immobilization. A reversible peak with midpoint potential of 0.38 V was observed in cyclic voltammetry with 0.1 M NaNO₃. Electrocatalytic oxidation of thiosulfate was effective on the modified electrode at a significantly reduced overpotential of 0.5 V and at broad pH range. The modified electrode can be used for the determination of thiosulfate in the concentration range of 7.0 × 10^–4 to 5.6 × 10^–3 M. It has been used for the amperometric determination of thiosulfate in photographic effluents. The results obtained were in good agreement with those obtained by other methods. Received: 27 January 1999 / Revised: 5 July 1999 / Accepted: 7 July 1999     

Electrocatalytic oxidation of L-tryptophan using copper hexacyanoferrate film modified gold nanoparticle graphite-wax electrode

A novel copper hexacyanoferrate (CuHCF) film modification on cysteamine (Cys)-gold nanoparticle (AuNp) graphite-wax (GW) composite electrode was achieved for the quantitative determination of L-Tryptophan (L-Trp) at a reduced overpotential of 400mV in comparison with the bare Cys-AuNp-GW composite electrode. This modified electrode exhibited a well resolved pair of redox peaks corresponding to the hexacyanoferrate (II/III) reactions of CuHCF film at a formal potential of 0.65 V at a scan rate of 20 mV s(-1). Electrochemical impedance spectroscopy (EIS) studies with the modified electrode showed a very low charge transfer resistance to the electron transfer kinetics of Fe(II)/Fe(III) reactions. A linear range of 8.5×10(-7) M to 1.2×10(-4) M with a detection limit of 1.85×10(-8) M was achieved for the determination of L-Trp with a sensitivity of 0.1198 μA/μM. The influence of ultrasonication on the stability of the CuHCF film modified electrode was investigated. In addition, the CuHCF film modified electrode displayed an excellent reproducibility towards the real time analysis of L-Trp in commercial milk samples.     

Electrochemical preparation and characterization of dysprosium hexacyanoferrate modified electrode

An electroactive polynuclear inorganic compound of rare earth metal hexacyanoferrate, dysprosium hexacyanoferrate (DyHCF), was prepared by a procedure of electrochemical deposition on the surface of a glassy carbon electrode with a potential cycling procedure. The cyclic voltammogram of DyHCF exhibits two pairs of redox peaks with the formal potential of +210 and +362 mV (vs. SCE), respectively, at a scan rate of 10 mV/s in 0.2 mol/L KCl solution. The different electrochemical behaviors of DyHCF in various cation-containing supporting electrolytes were investigated by cyclic voltammetry. DyHCF was also characterized by scanning electron microscope (SEM), FTIR , XPS etc. techniques.     

A simple method for fabrication of sole composition nickel hexacyanoferrate modified electrode and its application

Nickel hexacyanoferrate film modified gold electrode was prepared by a simple chemical deposition procedure from a fresh prepared solution containing ferricyanide, Ni²⁺, and sodium nitrate. The resultant films have solo composition and are significantly stable as compared to the electrochemically deposited NiHCF films. For different concentrations of Na⁺ in the solution, the formal potential values of NiHCF shift according to the Nernstian behavior with a slope of 48 mV in the range of 10⁻⁴ to 1.0 M. The NiHCF film was also used for the electrocatalytic oxidation of ascorbic acid. The anodic peak current observed in cyclic voltammetry increased with the ascorbic acid concentration. At a fixed potential under hydrodynamic conditions, the calibration plot was linear over the ascorbic acid concentration range 0.1-12 mM.     

Electrocatalytic oxidation of thiosulfate on a modified nickel hexacyanoferrate film electrode

Summary A modified nickel hexacyanoferrate film glassy carbon electrode is prepared by the electrochemical deposition technique. The film is very stable upon voltammetric scanning in the potential range of 1.0 to –0.5 V (vs. SCE) and an oxidation peak occurs at 0.35 V (vs. SCE) (1 mol/l NaNO₃). The effects of electrolyte, solvent, coexisting ions and other variables on the voltammetric behaviour of the modified film have been studied. The thickness of the resulting film can be controlled by changing the number of voltammetric cycles and the concentrations of nickel(II) and hexacyanoferrate(III) ions. The film shows catalytic activity towards electrooxidation of thiosulfate with a peak potential +0.5 V (K^–-containing media). This oxidation potential of thiosulfate on the modified electrode is shifted negatively by about 550 mV as compared to the naked glassy carbon electrode. For practical application, the modified electrode can be used for the determination of thiosulfate in concentrations from 5.0×10^–5 to 1.0×10^–1 mol/l. This method has been successfully applied to the determination of thiosulfate in photographic waste effluents.     

Amperometric determination of paracetomol by a surface modified cobalt hexacyanoferrate graphite wax composite electrode

A stable electro active thin film of cobalt hexacyanoferrate (CoHCF) was deposited on the surface of an amine adsorbed graphite wax composite electrode using a simple method. Cyclic voltammetric experiments showed two pairs of well defined peaks for this CoHCF modified electrode which exhibited excellent electrocatalytic property for the oxidation of paracetomol at a reduced overpotential of 100 mV and over a concentration range of 3.33 × 10⁻⁶ to 1.0 × 10⁻³ M with a slope of 0.208 μA/μM with good sensitivity. The influence of the supporting electrolyte on peak current and peak potential were also obtained in addition with effects of common interference (e.g., ascorbic acid) on the response of the modified electrode. Various parameters that influence the electrochemical behavior of the modified electrode were optimized by varying scan rates and pH. Electrochemical impedance spectroscopy studies suggested that the electrode reaction of the CoHCF film is mainly controlled by transport of counter ion. The immobilized CoHCF maintained its redox activity showing a surface controlled electrode reaction with the electron transfer rate constant (K_s) of 0.94 s⁻¹ and charge transfer coefficient of 0.42. Hydrodynamic and chronoamperometric studies were done to explore the utility of the modified electrode in dynamic systems. The results of the differential pulse voltammetry (DPV) using the modified electrode was applied for the determination of paracetomol in commercially available tablets. The results obtained reveal that the electrode under study could be used as an effective sensor for online monitoring of paracetomol.     

Voltammetric determination of sorbite at a mechanically renewed copper electrode

Potentials and currents of D-sorbitol oxidation peaks as a function of polarization conditions for a copper electrode in situ renewed by mechanically cutting a 0.5-μm surface layer are studied by direct-current cyclic voltammetry. Oxidation peaks of sorbite emerge in cyclic voltammograms recorded in alkaline supporting electrolytes (0.05–0.10 M KOH and NaOH solutions) upon scanning the potential to the anodic region (E _p = 0.50–0.58 V) and in the reverse direction (E _p = 0.60–0.62 V). The shape and parameters of these peaks depend on the concentration of KOH, because of the different copper oxides involved in the oxidation of sorbite formed at the electrode surface. The regeneration of the electrode surface is the necessary condition for good reproducibility of the peak parameters. The signals obtained on the surface of the unrenewed electrodes are almost halved and less reproducible. The calibration graph of the current of the sorbite oxidation peak as a function of its concentration is linear in the range from 5 × 10⁻⁴ to 1 × 10⁻² M.     

Electrocatalytic oxidation of captopril using a carbon-paste electrode modified with copper-cobalt hexacyanoferrate

A carbon-paste electrode was modified with copper-cobalt hexacyanoferrate by consecutive potential cycling. The kinetic parameters were calculated for the electroactive species. The resulting electrode exhibited electrocatalytic activity towards the oxidation of captopril. The kinetics of the electrocatalytic reaction was studied. A linear relationship was observed between anodic current and the concentration of captopril in the range of 5.0 × 10^?6–3.1 × 10^?5 μM with a detection limit of 4.2 μM (S/N = 3). The modified electrode was used in the analysis of captopril tablets successfully.     

Nickel,copper and manganese hexacyanoferrate with poly(3,4-ethylenedioxythiophene) hybrid film modified electrode for selectively determination of ascorbic acid

The NiHCF-PEDOT, CuHCF-PEDOT and MnHCF-PEDOT films were prepared on glassy carbon electrode (GCE) by multiple scan cyclic voltammetry and characterized using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and scanning electron microscope (SEM) techniques. The advantages of these films are demonstrated for selectivity detection of ascorbic acid using cyclic voltammetry and amperometric method. Interestingly, the NiHCF-PEDOT and CuHCF-PEDOT modified electrodes exhibited a wide linear response range (5 × 10⁻⁶−3 × 10⁻⁴ M, R ² = 0.9973 and 1.8 × 10⁻³−1.8 × 10⁻² M, R ² = 0.9924). The electrochemical sensors facilitated the oxidation of AA but not responded to other electroactive biomolecules such as dopamine, uric acid, H₂O₂, glucose. The difference is MnHCF-PEDOT/GCE that no response to AA. In addition, the NiHCF-PEDOT and CuHCF-PEDOT modified electrodes exhibited a distinct advantage of simple preparation, specificity, stability and reproducibility.     

Voltammetric determination of isoprenaline in pharmaceutical preparations using a copper(II) hexacyanoferrate(III) modified carbon paste electrode

The electroanalytical determination of isoprenaline in pharmaceutical preparations of a homemade carbon paste electrode modified with copper(II) hexacyanoferrate(III) (CuHCF) was studied by cyclic voltammetry. Several parameters were studied for the optimization of the sensor such as electrode composition, electrolytic solution, pH effect, potential scan rate and interferences in potential. The optimum conditions were found in an electrode composition (in mass) of 15% CuHCF, 60% graphite and 25% mineral oil in 0.5 mol l⁻¹ acetate buffer solution at pH 6.0. The analytical curve for isoprenaline was linear in the concentration range from 1.96×10⁻⁴ to 1.07×10⁻³ mol l⁻¹ with a detection limit of 8.0×10⁻⁵ mol l⁻¹. The relative standard deviation was 1.2% for 1.96×10⁻⁴ mol l⁻¹ isoprenaline solution (n=5). The procedure was successfully applied to the determination of isoprenaline in pharmaceutical preparations; the CuHCF modified carbon paste electrode gave comparable results to those results obtained using a UV spectrophotometric method.     

Voltammetric determination of N-acetylcysteine using a carbon paste electrode modified with copper(II) hexacyanoferrate(III)

The preparation and electrochemical characterization of a carbon paste electrode modified with copper(II) hexacyanoferrate(III) (CuHCF) as well as its behavior as electrocatalyst toward the oxidation of N-acetylcysteine were investigated. The electrochemical behavior of the modified electrode and the electrooxidation of N-acetylcysteine were explored using sweep linear voltammetry. The best voltammetric response was observed for a paste composition of 20% (w/w) copper(II) hexacyanoferrate(III) complex, acetate buffer solution at pH of 6.0 as the electrolyte and scan rate of 10 mV s^− 1. A linear voltammetric response for N-acetylcysteine was obtained in the concentration range from 1.2 × 10^− 4 to 8.3 × 10^− 4 mol L^− 1, with a detection limit of 6.3 × 10^− 5 mol L^− 1. The proposed electrode is useful for the quality control and routine analysis of N-acetylcysteine in pharmaceutical formulations.     

Amperometric determination of morphine on cobalt hexacyanoferrate modified electrode in rat brain microdialysates

The analysis of morphine in biological fluids is of vital interest in monitoring opiate abuse and in drug abuse research. In this paper, a cobalt hexacyanoferrate (CoHCF) chemically modified electrode (CME) was prepared. The electrochemical behavior of morphine at this modified electrode has been studied by cyclic voltammetry (CV). The results indicated that the modified electrode exhibited efficiently electrocatalytic oxidation for morphine with relatively high sensitivity and stability. The CoHCF CME was employed as the detector of high-performance liquid chromatography (HPLC). The peak current was linearly related to the morphine concentration in the range of 1.0x10(-6) M to 5.0x10(-4) M at +0.60 V (vs. Ag/AgCl) with a detection limit of 5.0x10(-7) M (S/N of 3). Typical intra-day reproducibility (n=5) of 2.0% and inter-day reproducibility (n=5) of 3.8% were obtained at the 2.0x10(-5) M level. This method was for the first time applied to study the pharmacokinetics of morphine in rat brain after an intravenous administration of morphine (25 mgkg(-1)).     

番红花红聚合膜修饰电极及其应用

研究了番红花红(SFR)在玻碳电极表面聚合过程及聚合条件。SFR聚合膜对于肾上腺素(EP)的氧化能够起到明显的电催化作用。分别利用循环伏安法(CV)、差分脉冲法(DPV)、计时电流法研究了EP在pH7.4的磷酸缓冲溶液中的线性关系,发现其浓度分别在2.0×10-6～9.0×10-6mol/L、1.0×10-5～1.0×10-3mol/L(CV),2.0×10-5～4.0×10-4mol/L(DPV),2.0×10-6～5.0×10-6mol/L(计时电流法)范围内呈良好的线性关系,该电极已用于实际样品测定。     

Aluminum electrode modified with manganese hexacyanoferrate as a chemical sensor for hydrogen peroxide

A chemically modified electrode was fabricated based on manganese hexacyanoferrate (MnHCF) film. The MnHCF was used as a modifier immobilized onto an aluminum electrode. Stability of the electroactive film formed on the Al electrode surface indicated that MnHCF is a suitable material for the preparation of modified electrodes. The analytical applicability of the modified electrode for the determination of hydrogen peroxide was examined. A linear response in concentration range of 6.0x10(-7)-7.4x10(-3) M (r=0.9997) was obtained with detection limit of 2.0x10(-7) M for the determination of hydrogen peroxide. The modified electrode exhibited a good selectivity for H(2)O(2) in real samples. The mentioned electrode has advantages of being highly stable, sensitive, inexpensive, ease of construction and use.     

Influence of copper hexacyanoferrate film thickness on the electrochemical properties of self-assembled 3-mercaptopropyl gold electrode and application as a hydrazine sensor

A copper hexacyanoferrate film was obtained on a modified electrode prepared by self-assembly of 3-mercaptopropyltrimethoxysilane on a gold surface. The film thickness was controlled using a layer-by-layer technique to tune the electrocatalytic properties of the electrode. Two electrodes with different hexacyanoferrate film thicknesses were prepared via three immersions (AuS/CuHCF3) and six immersions (AuS/CuHCF6) of the film in the precursor solutions. Cyclic voltammetry data were obtained to determine the adequate film thickness. Scanning electron microscopy images showed a roughness increase due to the growth of the film thickness at the electrode surface. Electrochemical impedance spectroscopy showed distinct behavior for the two electrodes prepared; while diffusion and charge transfer processes can be observed in both electrodes, an additional capacitive process at intermediary frequencies was observed for the AuS/CuHCF6 electrode. The charge transfer resistance (R _ct) for the AuS/CuHCF3 electrode (19.6 Ω cm²) was lower than for AuS/CuHCF6 (27.9 Ω cm²) due to the hexacyanoferrate film thickness, since the charge transfer process demands the simultaneous diffusion of K⁺ into the surface. Cyclic voltammetry was used to evaluate the application of the AuS/CuHCF3 electrode as an electrochemical sensor, revealing a linear correlation for hydrazine concentrations.     

Mechanically immobilized nickel aquapentacyanoferrate modified electrode as an amperometric sensor for the determination of BHA

Nickel aquapentacyanoferrate (NAPCF), a novel transition metal complex has been prepared and its ability to act as an electrocatalyst for BHA oxidation has been demonstrated. The cyclic voltammetric behaviour of the NAPCF modified electrode prepared by mechanical immobilization on the graphite electrode was well defined. A pair of redox peaks corresponding to the electrochemical behaviour of the NAPCF was observed at 0.35 V and 0.31 V, corresponding to the anodic and cathodic peaks respectively, with a formal potential of 0.33 V. The NAPCF modified electrode favoured electrocatalytic oxidation of BHA to occur at a greatly minimized overpotential of 0.48 V. Experiments were performed to characterize the electrode as an amperometric sensor for the determination of BHA. The anodic peak current was linearly related to BHA concentration in the range of 6.24x10(-7) M to 2.19x10(-4) M with a detection limit of 2.49x10(-7) M and a correlation coefficient of 0.9979. Amperometry in stirred solution exhibited quick and sensitive response to BHA, showing the possible application of the modified electrode in flow system analysis. The modified electrode retained its initial response for more than 2 months when stored in supporting electrolyte, owing to the chemical and mechanical stability of the NAPCF mediator. This modified electrode was also quite effective in the determination of BHA in commercial samples.     

血红蛋白在纳米羟基磷灰石修饰的热解石墨电极上的直接电化学

采用超声辅助沉淀法合成羟基磷灰石纳米晶体,制作了以纳米羟基磷灰石(HAp)修饰的热解石墨电极(EPG)。并研究了血红蛋白在该修饰电极上的直接电化学行为。在pH6.9的磷酸盐(PBS)缓冲溶液中,得到一对可逆的血红蛋白辅基血红素Fe(Ⅲ)/Fe(Ⅱ)电对的循环伏安氧化还原特征峰,式量电位E0p′=-0.356V(vs.SCE,pH6.9),几乎不随扫速的改变而变化,电子转移数为1.041,近似一个辅基发生一个电子转移。Hb在HAp/EPG电极表面直接电子转移的速率常数为0.6074。在该纳米HAp微环境中,Hb与EPG电极之间的电子传递得到极大促进,并显示了较好的稳定性。式量电势pH3.6~9.0范围内与溶液的pH成线性关系,直线斜率为-56.0mV/pH,说明Hb的电子传递过程伴随质子的转移。探讨了Hb-HAp修饰电极对H2O2的电催经性质,为制作生物传感器打下基础。