正、负离子表面活性剂凝胶化正丁醇

利用正、负离子表面活性剂混合体系月桂酸钠/十六烷基三甲基溴化铵(SL/CTAB)成功实现了正丁醇的凝胶化, 并借助流变仪、扫描电子显微镜(SEM)研究了该凝胶的流变性质和微观形貌. 实验发现, 正、负离子表面活性剂的浓度及混合比例对正丁醇凝胶的形成具有较大影响, 只有在合适的浓度和混合比例下正丁醇才能被有效地凝胶化. 在正丁醇能够形成凝胶的前提下, 固定正、负离子表面活性剂混合体系中某一组分的浓度, 体系的粘度随着另一组分浓度的增加而增大. 流变结果表明该凝胶具有剪切变稀的非牛顿流体特性. 微观形貌的研究表明所形成的凝胶具有典型的三维网络结构, 厚度相对均一的带状纤维是组成网络的结构单元. 进一步的研究表明, 正、负离子表面活性剂碳氢链的疏溶剂作用、极性头基间的静电吸引作用、表面活性剂与正丁醇分子间的氢键作用对凝胶的形成起到重要的作用.     

Viscosity enhancement of complexed solutions formed through the complexation of nonionic water‐soluble polymers with chemically complementary structures in aqueous media

The intermacromolecular complexation of polymers with chemically complementary structures in aqueous media is a new approach to modifying polymer solutions, especially to enhance solution viscosity. In this study, complexed solutions formed through the hydrogen‐bonding complexation of several nonionic water‐soluble polymer pairs—poly(acrylic acid) (PAA) with polyacrylamide (PAM), PAM with poly(ethylene oxide) (PEO), PAA with poly(vinyl alcohol) (PVA), and PEO with PVA—were prepared, and the viscosity enhancement of the complexed solutions were studied with vision spectrophotometry and viscometry. The effects of the polymer concentration, polymer molecular weight, and pH value of the polymer solution on the intermacromolecular interactions were investigated through a comparison of the viscosity enhancement factor R of different complexed solutions. The results show that the viscosity of the PAA/PAM complexed solution is much higher than that of its constituents, whereas that of the PAM/PEO and the PAA/PVA complexed solutions are between the viscosities of their constituents but are higher than the theory values calculated from the blending rule of two polymer solutions. These results indicate that in the complexed solutions there exist interactions between the macromolecules with chemically complementary structures, although the interactions are quite different for the different complexed systems. It is the interactions that lead to an association of the polymers and, hence, an obvious enhancement in the solution viscosity and the resistance of the polymer solutions to shearing. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1069–1077, 2000     

Model of hyperbranched polymers formed by monomers A2 and Bg with end-capping molecules

Hyperbranched polymers, HBPs, formed via a stepwise polymerization of A₂, B_g type monomers with the addition of end-capping molecules, AR, were investigated by means of recursive and kinetic models. First, gelation curves were established based on the initial compositions of reactants at various functionalities, g, of monomers B_g. According to this guide, the hyperbranched polymers without gel fraction can be obtained. The molecular structures of HBPs, such as molecular weight and the degree of branching were calculated as related to conversion. It is shown that they can be controlled by the composition of reactants. With the addition of molecules AR, the gelation can be avoided at high conversion, and the distribution of molecular weights of polymers becomes narrower.     

Synthesis of highly fluorescent and water soluble perylene bisimide

Designed and synthesized a new highly water soluble N,N¹-bis（2-（（5-（（dimethylamino）methyl）furan-2-yl）methylthio）ethyl）-perylene -3,4,9,10-tetracarboxylic diimide from 2-（（5-（（dimethylamino）methyl）furan-2-yl）methylthio）ethanamine and perylene-3,4,9,10- tetracarboxylic dianhydride.The compound was characterized by ¹H,¹³C,2D NMR,mass and IR techniques.The compound is highly fluorescent with good solubility in water and other polar solvents.     

A water soluble nanostructured platinum (0) metal catalyst from platinum carbonyl molecular clusters: Synthesis, characterization and application in the selective hydrogenations of olefins, ketones and aldehydes

High nuclearity platinum carbonyl cluster anions (Chini's clusters) have been used as precursors to prepare a platinum nanocatalyst. The ionic polyelectrolyte poly(diallyldimethylammonium chloride) has been used as the support material for anchoring [Pt₃₀(CO)₆₀]²⁻ via ion-pairing and subsequent stabilization of the nanoparticles. The polymer-supported material has been studied by spectroscopy (NIR, ¹³C NMR, and IR) and TEM before and after its use as a water soluble hydrogenation catalyst. The nanocatalyst is found to be effective for the chemoselective hydrogenation of olefinic, aldehydic and ketonic double bonds. For most of the substrates isolation of the product and reuse of the catalyst are extremely easy due to the automatic phase separation of the products from the catalyst. The spectral features of the fresh catalyst show retention of the carbonyl ligands and molecular identity of the parent cluster, but after use the carbonyl ligands appear to be lost. TEM of the supported material before and after use as a catalyst shows the presence of platinum nanoparticles with majority (≥70%) of the particles in the range of 2–6 nm. Smaller particles are dominant in the used catalyst and this observation is rationalized on the basis of the known reactivity of Chini's clusters with dihydrogen.     

Facile synthesis of low-polydispersity block copolymer vesicles by azide-zwitterion cycloaddition

Polycaprolactone with azide (PCL-N₃) and polyethylene glycol with α,β-unsaturated ester (maPEG) as chain-end functional group were synthesized, respectively. Then, facile synthesis of polycaprolactone-block-polyethylene glycol (PCL-b-PEG) amphiphilic copolymer by azide-zwitterion cycloaddition of PCL-N₃ and maPEG, as the first example, was reported. The self-assembly of this amphiphilic copolymer was carried out in deionized water, and then the formation of vesicles was proven by the result of transmission electron microscope (TEM). Grainsize analyzer suggested that the diameter of the vesicles is 305 nm in average and the polydispersity of the vesicles is 0.128. The azide-zwitterion cycloaddition provides a powerful method for the post-functionalization of α,β-unsaturated ester or azide end-functionalized polymers.     

Solution properties, electrochemical behavior and protein interactions of water soluble triosmium carbonyl clusters

The synthesis and solution chemistry of the water soluble clusters [Os₃(CO)₉(μ-η²-Bz)(μ-H)L⁺] (HBz=quinoxaline, L⁺=[P(OCH₂CH₂NMe₃)₃I₃], 1) along with its negatively charged analog [Os₃(CO)₉(μ-η²-Bz)(μ-H)L⁻] (L⁻=[P(C₆H₄SO₃)₃Na₃], 2) are reported. In addition, we have examined the reduction potentials of the complexes [Os₃(CO)₉(μ-η²-Bz)(μ-H)L] (HBz=phenanthridine, L=L⁺ (3); HBz=5,6 benzoquinoline, L=L⁺ (4); HBz=3-amino quinoline, L=L⁺ (5); HBz=3-amino quinoline, L=L⁻ (6). The neutral analog of 1 and 2 [Os₃(CO)₉(μ-η²-Bz)(μ-H) PPh₃] (Bz=quinoxaline, 7) was also examined for comparison. Both compounds 1 and 2 show pH dependent NMR spectra that are interpreted in terms of the extent of protonation of the uncoordinated quinoxaline nitrogen which impacts the degree of aggregation of the clusters in aqueous solution. Compound 1 undergoes a reversible 1e⁻ reduction in water while 2 undergoes a quasi-reversible 1e⁻ reduction at more negative potentials as expected from the difference in charge on the phosphine ligand. Compound 7 undergoes a marginally reversible CV in methylene chloride at a potential intermediate between the positively and negatively charged clusters. The overall stability of the radical anions of 1, 2 and 7 is somewhat less than the corresponding decacarbonyl [Os₃(CO)₁₀(μ-η²-Bz)(μ-H)] (HBz=quinoxaline). While complexes 1 and 2 show reversible 1e⁻ reductions, all the other complexes examined show 1e⁻ and/or two 1e⁻ irreversible reductions in aqueous and non-aqueous solvents. The potentials for these complexes follow expected trends relating to the charge on the phosphine and the pH of the aqueous solutions. The ligand dependent trends are compared with those of the previously reported corresponding decacarbonyls. The interactions of the positively and negatively charged clusters with albumin have been investigated using the transverse and longitudinal relaxation times of the hydride resonances as probes of binding to the protein. Evidence of binding is observed for both the positive and negative clusters but the positive and negative clusters exhibit distinctly different rotational correlation times. Two additional complexes [Os₃(CO)₉(μ-η²-Bz)(μ-H)L] (HBz=2-methylbenzimidazole, L=L⁺ (8); L=L⁻ (10) and HBz=quinoline-4-carboxaldehyde, L=L⁺ (9); L=L⁻ (11)) are reported in connection with these studies.     

Interaction of nonylphenyl and tributylphenyl ethylene oxide ionic surfactants with highly soluble cyclodextrin derivatives

The modification of the hydrophobicity of some ethoxylated nonylphenol and tributylphenol surfactants with various soluble -cyclodextrin polymers has been studied by reversed-phase chromatography. Stepwise regression analysis proved that the complex forming capacity of surfactants decreases with increasing diameter of the hydrophobic moiety of surfactants, the properties of the crosslinking agent used for preparation of the polymers has no significant effect on the host-guest interaction, the presence of carboxyl groups in the polymer considerably improved the complex stability.     

Adsorption behavior of water soluble polymers with lower critical solution temperature

The adsorption behavior of hydroxylpropyl cellulose (HPC), ethyl hydroxylethyl cellulose (EHEC) and poly-vinylalcohol (PVA) polymers, which have a lower critical solution temperature (LCST), have been studied in comparison with the behavior of hydroxylethyl cellulose (HEC) with no LCST. The saturated amount of adsorption (A _s ) for the polymers with LCST depended significantly on the adsorption temperature and theA _s , e. g., for HPC obtained at the LCST, the amount was 1.5 times as large as the value at room temperature. The highA _s values obtained at the LCST were maintained over a long period at room temperature, and the dense adsorption layer formed on the latex particles at the LCST showed a strong protective action against flocculation. Furthermore, the effect of the surface nature of the adsorbent on the polymer adsorption at the LCST has been investigated using six kinds of synthetic latices with different surface natures. It was found that the hydrophobic interaction between the polymer and the adsorbent plays an important role in inducing the adsorption, and the trend of increasing the hydrophilic character of the latex surface prevents the formation of the adsorption layer of the polymer.     

Water‐soluble anionic conjugated polymers for metal ion sensing: Effect of interchain aggregation

Three sulfonato‐containing fluorene‐based anionic water‐soluble conjugated polymers, which are specially designed to link fluorene with alternating moieties such as bipyridine ( P1 ), pyridine ( P2 ), and benzene ( P3 ) have been synthesized via the Pd‐catalyzed Sonogashira‐coupling reaction, respectively. These polymers had good solubility in water and showed different responses for transition metal ions with different valence in aqueous environments: the fluorescence of bipyridine‐containing P1 can be completely quenched by addition of all transition metal ions selected and showed a good selectivity for Ni²⁺; the pyridine‐containing P2 had a little response for monovalent and divalent metal ions while showed good quenching with the addition of trivalent metal ions (with a special selectivity for Fe³⁺); P3 had responses only for the trivalent metal ions within the ionic concentration we studied. After investigation of the UV‐vis absorption spectra, PL emission spectra, DLS, and fluorescence lifetime of P1 – P3 in aqueous solution when adding transition metal ions, we found that the different spectrum responses of these polymers are attributed to the different coordination ability of the units linked with fluorene in the main chain. The energy or electron‐transfer reactions were the main reason for fluorescence quenching of P1 and P2 . On the other hand, interchain aggregation caused by trivalent metal ions lead to fluorescence quenching for P3 and also caused partly fluorescence quenching of P1 and P2 . These results revealed the origin of ionochromic effects of these polymers and suggested the potential application for these polymers as novel chemosensors with higher sensing sensitivity in aqueous environments. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5057–5067, 2009     

Polymer colloids formed by polyelectrolyte complexation of vinyl polymers and polysaccharides in aqueous solution

The polyelectrolyte complex formed from the polyanion and polycation was studied by turbidimetry, static and electrophoretic light scattering, and elementary analysis. Sodium salts of polyacrylate (PA) and heparin (Hep) were chosen as the polyanion, and hydrochloric salts of poly(vinyl amine) (PVA) and chitosan (Chts) as the polycation. Although these vinyl polymers and polysaccharides have remarkably different backbone chemical structures and linear charge densities, all the four combinations PA-PVA, PA-Chts, Hep-PVA, and Hep-Chts provide almost stoichiometric polyelectrolyte complexes which are slightly charged owing to the adsorption of the excess polyelectrolyte component onto the neutral complex. The charges stabilize the complex colloids in aqueous solution of a non-stoichiometric mixture, and the aggregation number of the complex colloids increases with approaching to the stoichiometric mixing ratio. The mixing ratio dependence of the aggregation number for the four complexes is explained by the model proposed in the previous study.     

Theoretical consideration of the molecular mass distribution of starlike polymers formed by attachment of linear polymers to dendritic cores

Star‐shaped polymers can be synthesized by condensation of linear polymers to dendritic cores. The distribution of molecular masses of such hybrid star polymers and the factors influencing it have been investigated by calculations based on population balance equations and Laplace transformations. Moreover, the expressions for numerical calculations of molecular mass distributions have been derived for both Poisson and Schultz–Zimm types of initial molecular mass distributions. According to the calculation results, the molecular mass distribution of the star polymers is strongly dependent on the distribution of the length of linear polymers. Beyond this, the molecular mass development is affected by several parameters that describe the reaction degree of dendritic cores, thus, by the fraction of all functional groups of dendritic cores involved in grafting, denoted by p; the average branching degree of one starlike molecule, represented by ρ; or the fraction of dendritic molecules becoming the cores of star polymers, expressed by p/ρ, provided the star molecule contains only one core. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2751–2758, 2001     

Complexation of nitrostyrenes with soluble β-cyclodextrin polymer studied by reversed-phase thin-layer chromatography

Cyclodextrin complexation decreases the apparent lipophilicity of hydrophobic guest molecules. A higher complex stability results in a larger decrease of lipophilicity as determined by reversed-phase thin-layer chromatography. The method was applied to study the complex formation of 33 nitrostyrene derivatives with a water soluble cross linked -cyclodextrin polymer (weight average molecular weight: 4300). The substituents in thepara position of the benzene ring had a higher impact on the complex stability than those in themeta andortho positions. The substituents on the alkyl side chain influenced the complex stability to the same extent as those on the benzen ring.     

Synthesis of water‐soluble cationic polymers with star‐like structure based on cyclodextrin core via ATRP

A range of novel cationic star‐like polymers (Star‐P(MeDMA)s) were synthesized through atom transfer radical polymerization (ATRP) by core‐first method, using a β‐cyclodextrin initiator with 21 initiation sites (21Br‐β‐CD). Methyl chloride‐quaternized 2‐(dimethylamino)ethyl methacrylate (MeDMA) was polymerized in an aqueous medium using 21Br‐β‐CD, Cu(I)Br, and 2,2′‐dipyridyl as an initiator, catalyst, and ligand, respectively. The effects of polymerization temperature and monomer/initiator ratios on the degree and kinetics of polymerization were investigated. The molecular weights, hydrodynamic sizes, and charge densities of the quaternized polymers were characterized using gel permeation chromatography (GPC), dynamic light scattering (DLS), and colloidal titration, respectively. The results demonstrated that the moderate aqueous solubility of the 21Br‐β‐CD initiator had significant impact on the physicochemical properties of the obtained star polymers. The polymerization of 500/1/2/5 ([M]₀/[I]₀/[Cu(I)₀/[L]₀]) at 90 °C for 6 h was found to be the best condition to synthesize the proposed cationic star polymer with well‐defined structures in aqueous medium. The nonlinear relationship between the apparent charge density and the particle size of the cationic star polymers was further revealed by GPC and DLS measurements. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6345–6354, 2005     

A general synthesis of water soluble upper rim calix[n]arene guanidinium derivatives which bind to plasmid DNA

The reaction of O-alkylated p-aminocalix[n]arenes (n=4, 6, 8) with N,N′-di(tert-butoxycarbonyl)thiourea in the presence of HgCl₂ and subsequent removal of the protective groups with hydrochloric acid led to the new water soluble calix[n]guanidinium derivatives (p-guanidiniumcalix[n]arenes) 20-23. With the exception of tetraoctyl-p-guanidiniumcalix[4]arene 21, which forms a macroscopic gelatinous aggregate even at very low concentration, all the synthesised guanidinium calixarenes show good solubility in water and sharp NMR signals. Moreover, these compounds are not cytotoxic and bind to plasmid DNA.     

液相色谱法测定生物发酵液中水溶性维生素的研究

本文采用反相离子对色谱测定了生物发酵液中的七种水溶性维生素。提出了用自行装填的酸性氧化铝（０．１９～０．１５ｍｍ）前置柱，和５％乙酸洗脱样品的前处理方法；并就有关的色谱条件进行了选择。色谱柱为ＮｏｖａＰａｋＣ１８；流动相Ａ液为０．０５ｍｏｌ／Ｌ庚烷磺酸盐（ＰＩＣＢ７），冰乙酸调ｐＨ＝２．５；Ｂ液为甲醇＋三乙胺（１００＋０．５）；梯度洗脱；ＵＶ２５４ｎｍ、２９０ｎｍ、３６０ｎｍ同时测定。线性范围为０．１～１０μｇ，各种维生素的ＲＳＤ在１．２％～３．０％之间（ＶｉｔａｍｉｎＢ１２除外），回收率大于９０％。     

Quantification of water soluble vitamins in six date palm (Phoenix dactylifera L.) cultivar's fruits growing in Dubai,United Arab Emirates,through high performance liquid chromatography

In present investigation, a comparative analysis of water soluble vitamins viz., B1 (thiamine HCl), B2 (riboflavin), B3 (nicotinamide), B5 (pantothenic acid), B6 (pyridoxine HCl), B9 (folic acid), B12 (cyanocobalamin) was carried out in fruits (immature, semimature and mature) of six date palm (Phoenix dactylifera L.) cultivars (“Barhee”, “Khalasah”, “Muzati”, “Shishi”, “Zart”, “Zardai”) growing in United Arab Emirates (UAE) by high performance liquid chromatograph (HPLC). The fruits were collected at three developing stages (immature, semimature and mature). Quantitative analysis of water soluble vitamins yield showed a significant variation within the different cultivars and the developing stages of date palm fruit. Vitamin B1, B3, B5, B6 were maximum (μg/100 g f.w.) in “Shishi”, “Zardai”, “Shishi” and “Muzati” at their matured stage, however, vitamin B2, B9, B12 were detected in immature fruit of “Khalasah”, “Khalasah” and “Shishi” cultivars. The vitamin production in fruits of different date palm cultivars was, therefore, developing stage specific and cultivar dependent. The present study showed that the date palm fruit could be used for human consumption with value addition of water soluble vitamins at their specific developmental stages.     

Separation of monosaccharides by solid-phase extraction with ionic liquid-modified microporous polymers

Ionic liquid-modified porous polymers with large surface area and large amount of functional groups were developed and used in SPE to separate four monosaccharides. Adsorption isotherm showed that the sorbent with amino ionic liquid groups had the highest interaction with the target compounds. The mobile phase of acetonitrile/water 85:15 and 73:30 v/v can successfully separate the monosaccharides. The sorbent produced reproducible results and performed stably, demonstrating its potential applicability in the separation of extract from natural plant.     

Aqueous biphasic systems formed by nonionic polymers II. Concentration effects of inorganic salts on phase separation

Concentration effects of KSCN, KClO₄, KI, KBr, KNO₃, KCl, KF and K₂SO₄ on the compatibility of dextran with ficoll, polyvinylpyrrolidone and poly(ethylene glycol) at fixed polymer concentration ratios were studied in aqueous solution. The results obtained are considered in terms of the Patterson theory of-effect. It is assumed that phase separation in an aqueous solution of two nonionic polymers results from the appearance of two different water structures in the vicinity of the phase polymers. The data obtained are considered in terms of the concept of salting-in-salting-out effects of neutral salts on aqueous solubility of biopolymers. The salt effects observed are attributed to two antagonistic influences of salts on the electrostatic (dipole-dipole) polymer-water interactions and on the water-water interactions in the vicinity of the phase polymers.     

A study of the surface analysis of some water‐soluble polymers by inverse gas chromatography

The surface characterization of 2‐(dimethylamino)ethylmethacrylate (DMA) and 2‐(N‐morpholino)ethylmethacrylate (MEMA) homopolymers and DMA–MEMA diblock copolymer was studied using inverse‐gas chromatography (IGC). The analyzed surface properties of (co)polymers were the dispersive component of the surface energy ( ) and the acid–base characters of (co)polymer surfaces. The specific free energy (ΔG^sp), enthalpy (ΔH^sp), and entropy (ΔS^sp) of adsorption of polar probes on (co)polymers were calculated. The values of ΔH^sp were correlated with both the donor and the modified acceptor numbers (AN) of the probes to quantify the acidic K_A and the basic K_D parameters of (co)polymer surfaces. The values obtained for the K_A and K_D parameters indicated basic characters for the surface of (co)polymers. The dispersive component values of the surface energy and the acid–base surface parameters of the DMA–MEMA diblock copolymer surface were found to be between those homopolymers as expected. Copyright © 2008 John Wiley & Sons, Ltd.