Excitation wavelength dependence of solvation dynamics in a supramolecular assembly: PEO-PPO-PEO triblock copolymer and SDS

The triblock copolymer (PEO)20-(PPO)70-(PEO)20 (P123) forms a supramolecular aggregate with sodium dodecyl sulfate (SDS). The solvation dynamics and anisotropy decay of coumarin 480 (C480) in different regions of a P123-SDS aggregate are studied through variation of the excitation wavelength (lambdaex) using femtosecond upconversion. In a P123 micelle, because of the drastic differences in polarity between the hydrophilic corona region (PEO block) and the hydrophobic PPO core, C480 exhibits a pronounced red edge excitation shift (REES) of emission maximum by 24 nm. In the P123-SDS aggregate, SDS penetrates the core of the P123 micelle. This increases the polarity of the core and reduces the difference in the polarity between the core and the corona region. In a P123-SDS aggregate, the REES is much smaller (5 nm) which suggests a reduced difference between the core and the corona. Solvation dynamics in a P123 micelle displays a bulklike ultrafast component (<0.3 and 1 ps) in the PEO corona region, a 200 ps component arising from dynamics of polymer segments, and a very long component (5000 or 3000 ps) due to the highly restricted PPO core. In a P123-SDS aggregate, at lambdaex = 375 and 405 nm, the solvation dynamics is found to be faster than that in P123 micelle. In this case, the component (3000 ps) arising from the core region is faster than that (5000 ps) in P123 micelle. In both P123 micelle and P123-SDS aggregate, the relative contribution of the core region decreases and that of the corona region increases with an increase in lambdaex. At lambdaex = 435 nm, which probes the hydrophilic corona, the solvation dynamics for both P123 micelle and P123-SDS aggregate are almost similar.     

A femtosecond study of excitation wavelength dependence of a triblock copolymer-surfactant supramolecular assembly: (PEO)20-(PPO)70-(PEO)20 and CTAC

Solvation dynamics and anisotropy decay of coumarin 480 (C480) in a supramolecular assembly containing a triblock copolymer, PEO20-PPO70-PEO20 (Pluronic P123) and a surfactant, CTAC (cetyl trimethylammonium chloride) are studied by femtosecond up-conversion. In a P123-CTAC complex, C480 displays a significant (22 nm) red edge excitation shift (REES) in the emission maximum as lambda ex increases from 335 to 445 nm. This suggests that the P123-CTAC aggregate is quite heterogeneous. The average rotational relaxation time (tau rot) of C480 in a P123-CTAC complex decreases by a factor of 2 from 2500 ps at lambda ex = 375 nm to 1200 ps at lambda ex = 435 nm. For lambda ex = 375 nm, the probe molecules in the buried core region of P123-CTAC are excited and the solvation dynamics displays three components, 2, 60, and 4000 ps. It is argued that insertion of CTAC in P123 micelle affects the polymer chain dynamics, and this leads to reduction of the 130 ps component of P123 micelle to 60 ps in P123-CTAC. For lambda ex = 435 nm, which selects the peripheral highly polar corona region, solvation dynamics in P123-CTAC and P123 are extremely fast with a major component of <0.3 ps ( approximately 80%) and a 2 ps ( approximately 20%) component.     

Femtosecond solvation dynamics in different regions of a bile salt aggregate: excitation wavelength dependence

Solvation dynamics of coumarin 480 (C480) in the secondary aggregate of a bile salt (sodium deoxycholate, NaDC) is studied using femtosecond up-conversion. The secondary aggregate resembles a long (approximately 40 A) hollow cylinder with a central water-filled tunnel. Different regions of the aggregate are probed by variation of the excitation wavelength (lambdaex) from 375 to 435 nm. The emission maximum of C480 displays an 8 nm red shift as the lambdaex increases from 345 to 435 nm. The 8 nm red edge excitation shift (REES) suggests that the probe (C480) is distributed over regions of varied polarity. Excitation at a short wavelength (375 nm) preferentially selects the probe molecule in the buried locations and exhibits slow dynamics with a major (84%) slow component (3500 ps) and a small (16%) contribution of the ultrafast component (2.5 ps). Excitation at lambdaex=435 nm (red end) corresponds to the exposed sites where solvation dynamics is very fast with a major (73%) ultrafast component (相似文献   

A femtosecond study of excitation wavelength dependence of solvation dynamics in a PEO-PPO-PEO triblock copolymer micelle

Excitation wavelength (lambdaex) dependence of solvation dynamics of coumarin 480 (C480) in the micellar core of a water soluble triblock copolymer, PEO20-PPO70-PEO20 (Pluronic P123), is studied by femtosecond and picosecond time resolved emission spectroscopies. In the P123 micelle, the width of the emission spectrum of C480 is found to be much larger than that in bulk water. This suggests that the P123 micelle is more heterogeneous than bulk water. The steady state emission maximum of C480 in P123 micelle shows a significant red edge excitation shift by 25 nm from 453 nm at lambdaex=345 nm to 478 nm at lambdaex=435 nm. The solvation dynamics in the interior of the triblock copolymer micelle is found to depend strongly on the excitation wavelength. The excitation wavelength dependence is ascribed to a wide distribution of locations of C480 molecules in the P123 micelle with two extreme environments-a bulklike peripheral region with very fast solvent response and a very slow core region. With increase in lambdaex, contribution of the bulklike region having an ultrafast component (< or =2 ps) increases from 7% at lambdaex=375 nm to 78% at lambda(ex)=425 nm while the contribution of the ultraslow component (4500 ps) decreases from 79% to 17%.     

Ultrafast fluorescence resonance energy transfer in the micelle and the gel phase of a PEO-PPO-PEO triblock copolymer: excitation wavelength dependence

Fluorescence resonance energy transfer (FRET) from coumarin 480 (C480) to rhodamine 6G (R6G) is studied in the micelle and the gel phase of a triblock copolymer, (PEO)20-(PPO)70-(PEO)20 (Pluronic P123 (P123)) by picosecond and femtosecond emission spectroscopy. The time constants of FRET were obtained from the rise time of the acceptor (R6G) emission. In a P123 micelle, FRET occurs in multiple time scales: 2.5, 100, and 1700 ps. In the gel phase, three rise components are observed: 3, 150, and 2600 ps. According to a simple F?rster model, the ultrafast (2.5 and 3 ps) components of FRET correspond to donor-acceptor distance RDA=13 +/- 2 A. The ultrafast FRET occurs between a donor and an acceptor residing at close contact at the corona (PEO) region of a P123 micelle. With increase in the excitation wavelength (lambdaex) from 375 to 435 nm, the relative contribution of the ultrafast component of FRET ( approximately 3 ps) increases from 13% to 100% in P123 micelle and from 1% to 100% in P123 gel. It is suggested that at lambdaex = 435 nm, mainly the highly polar peripheral region is probed where FRET is very fast due to close proximity of the donor and the acceptor. The 100 and 150 ps components correspond to RDA = 25 +/- 2 A and are ascribed to FRET from C480 deep inside the micelle to an acceptor (R6G) in the peripheral region. The very long component of FRET (1700 ps in micelle and 2600 ps component in gel) may arise from diffusion of the donor from outside the micelle to the interior followed by fast FRET.     

Femtosecond solvation dynamics in a neat ionic liquid and ionic liquid microemulsion: excitation wavelength dependence

Solvation dynamics in a neat ionic liquid, 1-pentyl-3-methyl-imidazolium tetra-flouroborate ([pmim][BF4]) and its microemulsion in Triton X-100 (TX-100)/benzene is studied using femtosecond up-conversion. In both the neat ionic liquid and the microemulsion, the solvation dynamics is found to depend on excitation wavelength (lambda(ex)). The lambda(ex) dependence is attributed to structural heterogeneity in neat ionic liquid (IL) and in IL microemulsion. In neat IL, the heterogeneity arises from clustering of the pentyl groups which are surrounded by a network of cation and anions. Such a nanostructural organization is predicted in many recent simulations and observed recently in an X-ray diffraction study. In an IL microemulsion, the surfactant (TX-100) molecules aggregate in form of a nonpolar peripheral shell around the polar pool of IL. The micro-environment in such an assembly varies drastically over a short distance. The dynamic solvent shift (and average solvation time) in neat IL as well as in IL microemulsions decreases markedly as lambda(ex) increases from 375 to 435 nm. In a [pmim][BF4]/water/TX-100/benzene quaternary microemulsion, the solvation dynamics is slower than that in a microemulsion without water. This is ascribed to the smaller size of the water containing microemulsion. The anisotropy decay in an IL microemulsion is found to be faster than that in neat IL.     

A Femtosecond Study of Solvation Dynamics and Anisotropy Decay in a Catanionic Vesicle: Excitation‐Wavelength Dependence

The structure and dynamics of a catanionic vesicle are studied by means of femtosecond up‐conversion and dynamic light scattering (DLS). The catanionic vesicle is composed of dodecyl‐trimethyl‐ammonium bromide (DTAB) and sodium dodecyl sulphate (SDS). The DLS data suggest that 90 % of the vesicles have a diameter of about 400 nm, whereas the diameter of the other 10 % is about 50 nm. The dynamics in the catanionic vesicle are compared with those in pure SDS and DTAB micelles. We also study the dynamics in different regions of the micelle/vesicle by varying the excitation wavelength (λ_ex) from 375 to 435 nm. The catanionic vesicle is found to be more heterogeneous than the SDS or DTAB micelles, and hence, the λ_ex‐dependent variation of the solvation dynamics is more prominent in the first case. The solvation dynamics in the vesicle and the micelles display an ultraslow component (2 and 300 ps, respectively), which arises from the quasibound, confined water inside the micelle, and an ultrafast component (<0.3 ps), which is due to quasifree water at the surface/exposed region. With an increase in λ_ex, the solvation dynamics become faster. This is manifested in a decrease in the total dynamic solvent shift and an increase in the contribution of the ultrafast component (<0.3 ps). At a long λ_ex (435 nm), the surface (exposed region) of a micelle/vesicle is probed, where the solvation dynamics of the water molecules are faster than those in a buried location of the vesicle and the micelles. The time constant of anisotropy decay becomes longer with increasing λ_ex, in both the catanionic vesicle and the ordinary micelles (SDS and DTAB). The slow rotational dynamics (anisotropy decay) in the polar region (at long λ_ex) may be due to the presence of ionic head groups and counter ions.     

Effect of ionic liquid on the native and denatured state of a protein covalently attached to a probe: Solvation dynamics study

Effect of a room temperature ionic liquid (RTIL, [pmim][Br]) on the solvation dynamics of a probe covalently attached to a protein (human serum albumin (HSA)) has been studied using femtosecond up-conversion. For this study, a solvation probe, 7-diethylamino-3-(4-maleimidophenyl)-4-methylcoumarin (CPM) has been covalently attached to the lone cysteine group (cys-34) of the protein HSA. Addition of 1.5 M RTIL or 6 M GdnHCl causes a red shift of the emission maxima of CPM bound to HSA by 3 nm and 12 nm, respectively. The average solvation time ?τ(s)? decreases from 650 ps (in native HSA) to 260 ps (～2.5 times) in the presence of 1.5 M RTIL and to 60 ps (～11 times) in the presence of 6 M GdnHCl. This is ascribed to unfolding of the protein by RTIL or GdnHCl and therefore making the probe CPM more exposed. When 1.5 M RTIL is added to the protein denatured by 6 M GdnHCl in advance, a further ～5 nm red shift along with further ～2 fold faster solvent relaxation (?τ? ～30 ps) is observed. Our previous fluorescence correlation spectroscopy study [D. K. Sasmal, T. Mondal, S. Sen Mojumdar, A. Choudhury, R. Banerjee, and K. Bhattacharyya, J. Phys. Chem. B 115, 13075 (2011)] suggests that addition of RTIL to the protein denatured by 6 M GdnHCl causes a reduction in hydrodynamic radius (r(h)). It is demonstrated that in the presence of RTIL and GdnHCl, though the protein is structurally more compact, the local environment of CPM is very different from that in the native state.     

Diffusion of organic dyes in a niosome immobilized on a glass surface using fluorescence correlation spectroscopy

Giant multilameller niosomes containing cholesterol and triton X-100 are studied using fluorescence correlation spectroscopy (FCS). Dynamic light scattering (DLS) data indicates formation of niosomes of broadly two different sizes (diameter)--~150 nm and ~1300 nm. This is confirmed by field emission scanning electron microscopy (FE-SEM) and confocal microscopy. The diffusion coefficient (D(t)) of three organic dyes in the niosome immobilized on a glass surface is studied using fluorescence correlation spectroscopy. On addition of the room temperature ionic liquids (RTIL) (1-methyl-3-pentylimidazolium bromide, [pmim][Br] and 1-methyl- 3-pentylimidazolium tetra-fluoroborate, [pmim][BF(4)]) the size of the niosome particles increases. The D(t) of all the organic dyes (DCM, C343 and C480) increases on addition of RTILs, indicating faster diffusion. The viscosity calculated from the D(t) of the three dyes exhibits weak probe dependence. Unlike lipid or catanionic vesicle, the D(t) values in a niosome exhibit very narrow distribution. This indicates that the niosomes are fairly homogeneous with small variation of viscosity.     

Dynamics of solvent and rotational relaxation of coumarin-153 in room-temperature ionic liquid 1-butyl-3-methyl imidazolium tetrafluoroborate confined in poly(oxyethylene glycol) ethers containing micelles

We have investigated solvent and rotational relaxation of coumarin 153 (C-153) in room-temperature ionic liquid (RTILs) 1-butyl-3-methyl-imidazolium tetrafluoroborate ([bmim][BF(4)]) and the ionic liquid confined in alkyl poly(oxyethylene glycol) ethers containing micelles. We have used octaethylene glycol monotetradecyl ether (C(14)E(8)) and octaethylene glycol monododecyl ether (C(12)E(8)) as surfactants. In the [bmim][BF(4)]-C(14)E(8) micelle, we have observed only a 22% increase in solvation time compared to neat [bmim][BF(4)], whereas in the [bmim][BF(4)]-C(12)E(8) system, we have observed approximately 57% increase in average solvation time due to micelle formation. However, the slowing down in solvation time on going from neat RTIL to RTIL-confined micelles is much smaller compared to that on going from water to water confined micellar aggregates. The 22-57% increase in solvation time is attributed to the slowing down of collective motions of cations and anions in micelles. The rotational relaxation times become faster in both the micelles compare to neat [bmim][BF(4)].     

Ultrafast proton transfer of pyranine in a supramolecular assembly: PEO-PPO-PEO triblock copolymer and CTAC

Excited-state proton transfer (ESPT) of pyranine (8-hydroxypyrene-1,3,6-trisulfonate, HPTS) is studied in a polymer-surfactant aggregate using femtosecond emission spectroscopy. The polymer-surfactant aggregate is a supramolecular assembly consisting of a triblock copolymer (PEO)(20)-(PPO)(70)-(PEO)(20) (P123) and a cationic surfactant, cetyltrimethylammonium chloride (CTAC). ESPT of the protonated species (HA) in HPTS leads to the formation of A(-). The dynamics of ESPT may be followed from the decay of the HA emission (at approximately 440 nm) and rise of the A(-) emission (at approximately 550 nm). Both steady-state and time-resolved studies suggest that ESPT of HPTS in P123-CTAC aggregate is much slower than that in bulk water, in P123 micelle, or in CTAC micelle. The ratio of the steady-state emission intensities (HA/A(-)) in P123-CTAC aggregate is 2.2. This ratio is approximately 50, 12, and 2 times higher than that respectively in water, in P123 micelle, and in CTAC micelle. Retardation of ESPT causes an increase in the rise time of the A(-) emission of HPTS. In P123-CTAC aggregate, A(-) displays three rise times: 30, 250, and 2400 ps. These rise times are longer than those in CTAC micelle (23, 250, and 1800 ps), in bulk water (0.3, 3, and 90 ps), and in P123 micelle (15 and 750 ps). The rate constants for initial proton transfer, recombination, and dissociation of the ion pair are estimated using a simple kinetic scheme. The slow fluorescence anisotropy decay of HPTS in P123-CTAC aggregate is analyzed in terms of the wobbling-in-cone model.     

Dynamics of solvent and rotational relaxation of Coumarin 153 in a room temperature ionic liquid, 1-butyl-3-methylimidazolium octyl sulfate, forming micellar structure

The solvent and rotational relaxation of Coumarin 153 (C-153) was investigated by picosecond time-resolved fluorescence spectroscopy in a room temperature ionic liquid (RTIL), 1-butyl-3-methylimidazolium octyl sulfate ([C4mim][C8SO4]). This is a typical RTIL, which form micellar structure above certain concentration of the RTIL (0.031 M). Dynamic light scattering (DLS) measurements show that the average hydrodynamic diameter ( Dh) of a [C4mim][C8SO4]-water micelle is 2.8 (+/-0.2) nm. Both the solvent and rotational relaxation of C-153 are retarded in this micelle compared to the solvation time of a similar type of dye in neat water. However, the solvent relaxation in this ionic liquid surfactant is different from that of a conventional ionic surfactant. The slow component of the solvation dynamics in C8H17SO4Na or TX-100 micelle is on the nanoseconds time scale, whereas in [C4mim][C8SO4] micelle the same component is on the subnanoseconds time scale. The different molecular motions with different time scale is the main reason behind this difference in the solvation time in micelles composed of RTIL with other conventional micelles.     

Effect of electrostatic interaction on the location of molecular probe in polymer-surfactant supramolecular assembly: a solvent relaxation study

Effect of electrostatic interaction on the location of a solubilized molecular probe with ionic character in a supramolecular assembly composed of a triblock copolymer, P123 ((ethylene oxide) 20-(propylene oxide) 70-(ethylene oxide) 20) and a cosurfactant cetyltrimethylammonium chloride (CTAC) in aqueous medium has been studied using steady-state and time-resolved fluorescence measurements. Coumarin-343 dye in its anionic form has been used as the molecular probe. In the absence of the surfactant, CTAC, the probe C343 prefers to reside at the surface region of the P123 micelle, showing a relatively less dynamic Stokes' shift, as a large part of the Stokes' shift is missed in the present measurements due to faster solvent relaxation at micellar surface region. As the concentration of CTAC is increased in the solution, the percentage of the total dynamic Stokes' shift observed from time-resolved measurements gradually increases until it reaches a saturation value. Observed results have been rationalized on the basis of the mixed micellar structure of the supramolecular assembly, where the hydrocarbon chain of the CTAC surfactant dissolves into the nonpolar poly(propylene oxide) (PPO) core of the P123 micelle and the positively charged headgroup of CTAC resides at the interfacial region between the central PPO core and the surrounding hydrated poly(ethylene oxide) (PEO) shell or the corona region. The electrostatic attraction between the anionic probe molecule and the positively charged surface of the PPO core developed by the presence of CTAC results in a gradual shift of the probe in the deeper region of the micellar corona region with an increase in the CTAC concentration, as clearly manifested from the solvation dynamics results.     

Ultrafast fluorescence resonance energy transfer in a reverse micelle: excitation wavelength dependence

Fluorescence resonance energy transfer (FRET) from coumarin 480 (C480) to fluorescein 548 (F548) in a sodium dioctyl sulfosuccinate (AOT) reverse micelle is studied by picosecond and femtosecond emission spectroscopy. In bulk water, at the low concentration of the donor (C480) and the acceptor (F548), no FRET is observed. However, when the donor (C480) and the acceptor (F548) are confined in a AOT reverse micelle very fast FRET is observed. The time constants of FRET were obtained from the rise time of the emission of the acceptor (F548). In a AOT microemulsion, FRET is found to occur in multiple time scales--3, 200, and 2700 ps. The 3 ps component is assigned to FRET in the water pool of the reverse micelle with a donor-acceptor distance, 16 A. The 200 ps component corresponds to a donor-acceptor distance of 30 A and is ascribed to the negatively charged acceptor inside the water pool and the neutral donor inside the alkyl chains of AOT. The very long 2700 ps component may arise due to FRET from a donor outside the micelle to an acceptor inside the water pool and also from diffusion of the donor from bulk heptane to the reverse micelle. With increase in the excitation wavelength from 375 to 405 nm the relative contribution of the FRET due to C480 in the AOT reverse micelle (the 3 and 200 ps components) increases.     

Microwave synthesis and inherent stabilization of metal nanoparticles in 1-methyl-3-(3-carboxyethyl)-imidazolium tetrafluoroborate

The synthesis of Co-NPs and Mn-NPs by microwave-induced decomposition of the metal carbonyls Co(2)(CO)(8) and Mn(2)(CO)(10), respectively, yields smaller and better separated particles in the functionalized IL 1-methyl-3-(3-carboxyethyl)-imidazolium tetrafluoroborate [EmimCO(2)H][BF(4)] (1.6 ± 0.3 nm and 4.3 ± 1.0 nm, respectively) than in the non-functionalized IL 1-n-butyl-3-methylimidazolium tetrafluoroborate [Bmim][BF(4)]. The particles are stable in the absence of capping ligands (surfactants) for more than six months although some variation in particle size could be observed by TEM.     

Concentration-dependent dual behavior of hydrophilic ionic liquid in changing properties of aqueous sodium dodecyl sulfate

Modifying physicochemical properties of aqueous surfactant solutions in favorable fashion by addition of environmentally benign room-temperature ionic liquids (ILs) has enormous future potential. Due to its unusual properties, an IL may demonstrate a unique role in altering the properties of aqueous surfactant solutions. Changes in the properties of aqueous sodium dodecyl sulfate (SDS), an anionic surfactant, upon addition of a common and popular "hydrophilic" ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF4] are presented. Addition of low concentrations of [bmim][BF4] (i.e., 相似文献   

Solvation dynamics in aqueous anionic and cationic micelle solutions: sodium alkyl sulfate and alkyltrimethylammonium bromide

Solvation dynamics of the fluorescence probe, coumarin 102, in anionic surfactant, sodium alkyl sulfate (C(n)H(2n+1)SO(4)Na; n = 8, 10, 12, and 14), and cationic surfactant, alkyltrimethylammonium bromide (C(n)H(2n+1)N(CH(3))(3)Br; n = 10, 12, 14, and 16), micelle solutions have been investigated by a picosecond streak camera system. The solvation dynamics in the time range of 10(-10)-10(-8) s is characterized by a biexponential function. The faster solvation time constants are about 110-160 ps for both anionic and cationic micelle solutions, and the slower solvation time constants for sodium alkyl sulfate and alkyltrimethylammonium bromide micelle solutions are about 1.2-2.6 ns and 450-740 ps, respectively. Both the faster and the slower solvation times become slower with longer alkyl chain surfactant micelles. The alkyl-chain-length dependence of the solvation dynamics in both sodium alkyl sulfate and alkyltrimethylammonium bromide micelles can be attributed to the variation of the micellar surface density of the polar headgroup by the change of the alkyl chain length. The slower solvation time constants of sodium alkyl sulfate micelle solutions are about 3.5 times slower than those of alkyltrimethylammonium bromide micelle solutions for the same alkyl-chain-length surfactants. The interaction energies of the geometry optimized mimic clusters (H(2)O-C(2)H(5)SO(4)(-) and H(2)O-C(2)H(5)N(CH(3))(3)(+)) have been estimated by the density functional theory calculations to understand the interaction strengths between water and alkyl sulfate and alkyltrimethylammonium headgroups. The difference of the slower solvation time constants between sodium alkyl sulfate and alkyltrimethylammonium bromide micelle solutions arises likely from their different specific interactions.     

Ionic liquid induced changes in the properties of aqueous zwitterionic surfactant solution

Modifying properties of aqueous surfactant solutions by addition of external additives is an important area of research. Unusual properties of ionic liquids (ILs) make them ideal candidates for this purpose. Changes in important physicochemical properties of aqueous zwitterionic N-dodecyl- N, N-dimethyl-3-ammonio-1-propanesulfonate (SB-12) surfactant solution upon addition of hydrophilic IL 1-butyl-3-methylimidazolium tetrafluoroborate, [bmim][BF 4], are reported. Dynamic light scattering results indicate a dramatic reduction in the average micellar size in the presence of [bmim][BF 4]; micellar (or micelle-like) aggregation in the presence of as high as 30 wt % [bmim][BF 4] is confirmed. Responses from fluorescence probes are used to obtain critical micelle concentration (cmc), aggregation number ( N agg), and dipolarity and microfluidity of the micellar pseudophase of aqueous SB-12 in the presence of [bmim][BF 4]. In general, increasing the amount of [bmim][BF 4] to 30 wt % results in decrease in N agg and increase in cmc. Increase in the dipolarity and the microfluidity of the probe cybotactic region within the micellar pseudophase is observed on increasing [bmim][BF 4] concentration in the solution. It is attributed to increased water penetration into the micellar pseudophase as [bmim][BF 4] is added to aqueous SB-12. It is proposed that IL [bmim][BF 4] behaves similar to an electrolyte and/or a cosurfactant when present at low concentrations and as a polar cosolvent when present at high concentrations. Electrostatic attraction between cation of IL and anion of zwitterion, and anion of IL and cation of zwitterion at low concentrations of [bmim][BF 4] is evoked to explain the observed changes. Presence of IL as cosolvent appears to reduce the efficiency of micellization process by reducing the hydrophobic effect.     

Ultrafast surface solvation dynamics and functionality of an enzyme alpha-chymotrypsin upon interfacial binding to a cationic micelle

In this contribution we report studies on enzymatic activity of alpha-chymotrypsin (CHT) upon complexation with cationic cetyltrimethylammonium bromide (CTAB) micelle. With picosecond time resolution, we examined solvation dynamics at the interface of CHT-micelle complex, and rigidity of the binding. We have used 5-(dimethyl amino) naphthalene-1-sulfonyl chloride (dansyl chloride; DC) that is covalently attached to the enzyme at the surface sites. The solvation processes at the surface of CHT in buffer solution are found to be mostly in the sub-50 ps time scale. However, at the interface the solvation correlation function decays with time constant 150 ps (65%) and 500 ps (35%), which is significantly different from those found at the enzyme and micellar surfaces. The binding structure of the enzyme-micelle complex was examined by local orientational motion of the probe DC and compared with the case without micelle. The orientational dynamics of the probe DC in the complex reveals a structural perturbation at the surface sites of CHT upon complexation, consistent with other reported structural studies. We also found possible entanglement of charge transfer dynamics of the probe DC on the measured solvation processes by using time-resolved area normalized emission spectroscopic technique. The interfacial solvation process and complex rigidity elucidate the strong recognition mechanism between CHT and the micelle, which is important to understand the biological function of CHT upon complexation with the micelle.     

Unique role of hydrophilic ionic liquid in modifying properties of aqueous Triton X-100

Modification of important physicochemical properties of aqueous surfactant solutions can be achieved by addition of environmentally benign room temperature ionic liquids (ILs). While low aqueous solubility of "hydrophobic" ILs limits the amount of IL that may be added to achieve desired changes in the physicochemical properties, hydrophilic ILs do not have such restrictions associated to them. Alterations in the key physicochemical properties of aqueous solutions of a common nonionic surfactant Triton X-100 (TX100) on addition of up to 30 wt % hydrophilic IL 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]) are reported. The presence of micellar aggregates in as high as 30 wt % [bmim][BF4]-added aqueous TX100 solutions is established by dynamic light scattering and fluorescence probe behavior. Increasing the concentration of [bmim][BF4] results in decrease in average micellar size and aggregation number and increase in critical micelle concentration, indicating an overall unfavorable aggregation process. Increase in the dipolarity and the microfluidity of the probe cybotactic region within the palisade layer of the micellar phase upon [bmim][BF4] addition implies increased water penetration and the possibility of TX100-[bmim][BF4] interactions. While the changes in some of the physicochemical properties indicate the role of [bmim][BF4] to be similar to a cosurfactant, the IL acts like a cosolvent as far as changes in other properties are concerned. Effectiveness of IL [bmim][BF4] in modifying physicochemical properties of aqueous TX100 is demonstrated.